blob: 778434d6843fadd97c549f6702b39b792bd493c1 [file] [log] [blame]
/*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <hwconfig.h>
#include <ahci.h>
#include <mmc.h>
#include <scsi.h>
#include <fsl_esdhc.h>
#include <environment.h>
#include <fsl_mmdc.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
u8 in1;
puts("Board: LS1012ARDB ");
/* Initialize i2c early for Serial flash bank information */
i2c_set_bus_num(0);
if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) {
printf("Error reading i2c boot information!\n");
return 0; /* Don't want to hang() on this error */
}
puts("Version");
if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A)
puts(": RevA");
else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B)
puts(": RevB");
else
puts(": unknown");
printf(", boot from QSPI");
if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU)
puts(": emu\n");
else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1)
puts(": bank1\n");
else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2)
puts(": bank2\n");
else
puts("unknown\n");
return 0;
}
int dram_init(void)
{
static const struct fsl_mmdc_info mparam = {
0x05180000, /* mdctl */
0x00030035, /* mdpdc */
0x12554000, /* mdotc */
0xbabf7954, /* mdcfg0 */
0xdb328f64, /* mdcfg1 */
0x01ff00db, /* mdcfg2 */
0x00001680, /* mdmisc */
0x0f3c8000, /* mdref */
0x00002000, /* mdrwd */
0x00bf1023, /* mdor */
0x0000003f, /* mdasp */
0x0000022a, /* mpodtctrl */
0xa1390003, /* mpzqhwctrl */
};
mmdc_init(&mparam);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
int board_early_init_f(void)
{
fsl_lsch2_early_init_f();
return 0;
}
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
/*
* Set CCI-400 control override register to enable barrier
* transaction
*/
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
erratum_a010315();
#endif
#ifdef CONFIG_ENV_IS_NOWHERE
gd->env_addr = (ulong)&default_environment[0];
#endif
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
arch_fixup_fdt(blob);
ft_cpu_setup(blob, bd);
return 0;
}