board/compulab/cm_fx6/spl.c - github/trini/u-boot - Gitiles

 /*
  * SPL specific code for Compulab CM-FX6 board
  *
  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
  *
  * Author: Nikita Kiryanov <nikita@compulab.co.il>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <spl.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/mx6-ddr.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <fsl_esdhc.h>
 #include "common.h"

 DECLARE_GLOBAL_DATA_PTR;

 enum ddr_config {
 	DDR_16BIT_256MB,
 	DDR_32BIT_512MB,
 	DDR_32BIT_1GB,
 	DDR_64BIT_1GB,
 	DDR_64BIT_2GB,
 	DDR_64BIT_4GB,
 	DDR_UNKNOWN,
 };

 /*
  * Below DRAM_RESET[DDR_SEL] = 0 which is incorrect according to
  * Freescale QRM, but this is exactly the value used by the automatic
  * calibration script and it works also in all our tests, so we leave
  * it as is at this point.
  */
 #define CM_FX6_DDR_IOMUX_CFG \
 	.dram_sdqs0	= 0x00000038, \
 	.dram_sdqs1	= 0x00000038, \
 	.dram_sdqs2	= 0x00000038, \
 	.dram_sdqs3	= 0x00000038, \
 	.dram_sdqs4	= 0x00000038, \
 	.dram_sdqs5	= 0x00000038, \
 	.dram_sdqs6	= 0x00000038, \
 	.dram_sdqs7	= 0x00000038, \
 	.dram_dqm0	= 0x00000038, \
 	.dram_dqm1	= 0x00000038, \
 	.dram_dqm2	= 0x00000038, \
 	.dram_dqm3	= 0x00000038, \
 	.dram_dqm4	= 0x00000038, \
 	.dram_dqm5	= 0x00000038, \
 	.dram_dqm6	= 0x00000038, \
 	.dram_dqm7	= 0x00000038, \
 	.dram_cas	= 0x00000038, \
 	.dram_ras	= 0x00000038, \
 	.dram_sdclk_0	= 0x00000038, \
 	.dram_sdclk_1	= 0x00000038, \
 	.dram_sdcke0	= 0x00003000, \
 	.dram_sdcke1	= 0x00003000, \
 	.dram_reset	= 0x00000038, \
 	.dram_sdba2	= 0x00000000, \
 	.dram_sdodt0	= 0x00000038, \
 	.dram_sdodt1	= 0x00000038,

 #define CM_FX6_GPR_IOMUX_CFG \
 	.grp_b0ds	= 0x00000038, \
 	.grp_b1ds	= 0x00000038, \
 	.grp_b2ds	= 0x00000038, \
 	.grp_b3ds	= 0x00000038, \
 	.grp_b4ds	= 0x00000038, \
 	.grp_b5ds	= 0x00000038, \
 	.grp_b6ds	= 0x00000038, \
 	.grp_b7ds	= 0x00000038, \
 	.grp_addds	= 0x00000038, \
 	.grp_ddrmode_ctl = 0x00020000, \
 	.grp_ddrpke	= 0x00000000, \
 	.grp_ddrmode	= 0x00020000, \
 	.grp_ctlds	= 0x00000038, \
 	.grp_ddr_type	= 0x000C0000,

 static struct mx6sdl_iomux_ddr_regs ddr_iomux_s = { CM_FX6_DDR_IOMUX_CFG };
 static struct mx6sdl_iomux_grp_regs grp_iomux_s = { CM_FX6_GPR_IOMUX_CFG };
 static struct mx6dq_iomux_ddr_regs ddr_iomux_q = { CM_FX6_DDR_IOMUX_CFG };
 static struct mx6dq_iomux_grp_regs grp_iomux_q = { CM_FX6_GPR_IOMUX_CFG };

 static struct mx6_mmdc_calibration cm_fx6_calib_s = {
 	.p0_mpwldectrl0	= 0x005B0061,
 	.p0_mpwldectrl1	= 0x004F0055,
 	.p0_mpdgctrl0	= 0x0314030C,
 	.p0_mpdgctrl1	= 0x025C0268,
 	.p0_mprddlctl	= 0x42464646,
 	.p0_mpwrdlctl	= 0x36322C34,
 };

 static struct mx6_ddr_sysinfo cm_fx6_sysinfo_s = {
 	.cs1_mirror	= 1,
 	.cs_density	= 16,
 	.bi_on		= 1,
 	.rtt_nom	= 1,
 	.rtt_wr		= 0,
 	.ralat		= 5,
 	.walat		= 1,
 	.mif3_mode	= 3,
 	.rst_to_cke	= 0x23,
 	.sde_to_rst	= 0x10,
 };

 static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_s = {
 	.mem_speed	= 800,
 	.density	= 4,
 	.rowaddr	= 14,
 	.coladdr	= 10,
 	.pagesz		= 2,
 	.trcd		= 1800,
 	.trcmin		= 5200,
 	.trasmin	= 3600,
 	.SRT		= 0,
 };

 static void spl_mx6s_dram_init(enum ddr_config dram_config, bool reset)
 {
 	if (reset)
 		((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;

 	switch (dram_config) {
 	case DDR_16BIT_256MB:
 		cm_fx6_sysinfo_s.dsize = 0;
 		cm_fx6_sysinfo_s.ncs = 1;
 		break;
 	case DDR_32BIT_512MB:
 		cm_fx6_sysinfo_s.dsize = 1;
 		cm_fx6_sysinfo_s.ncs = 1;
 		break;
 	case DDR_32BIT_1GB:
 		cm_fx6_sysinfo_s.dsize = 1;
 		cm_fx6_sysinfo_s.ncs = 2;
 		break;
 	default:
 		puts("Tried to setup invalid DDR configuration\n");
 		hang();
 	}

 	mx6_dram_cfg(&cm_fx6_sysinfo_s, &cm_fx6_calib_s, &cm_fx6_ddr3_cfg_s);
 	udelay(100);
 }

 static struct mx6_mmdc_calibration cm_fx6_calib_q = {
 	.p0_mpwldectrl0	= 0x00630068,
 	.p0_mpwldectrl1	= 0x0068005D,
 	.p0_mpdgctrl0	= 0x04140428,
 	.p0_mpdgctrl1	= 0x037C037C,
 	.p0_mprddlctl	= 0x3C30303A,
 	.p0_mpwrdlctl	= 0x3A344038,
 	.p1_mpwldectrl0	= 0x0035004C,
 	.p1_mpwldectrl1	= 0x00170026,
 	.p1_mpdgctrl0	= 0x0374037C,
 	.p1_mpdgctrl1	= 0x0350032C,
 	.p1_mprddlctl	= 0x30322A3C,
 	.p1_mpwrdlctl	= 0x48304A3E,
 };

 static struct mx6_ddr_sysinfo cm_fx6_sysinfo_q = {
 	.cs_density	= 16,
 	.cs1_mirror	= 1,
 	.bi_on		= 1,
 	.rtt_nom	= 1,
 	.rtt_wr		= 0,
 	.ralat		= 5,
 	.walat		= 1,
 	.mif3_mode	= 3,
 	.rst_to_cke	= 0x23,
 	.sde_to_rst	= 0x10,
 };

 static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_q = {
 	.mem_speed	= 1066,
 	.density	= 4,
 	.rowaddr	= 14,
 	.coladdr	= 10,
 	.pagesz		= 2,
 	.trcd		= 1324,
 	.trcmin		= 59500,
 	.trasmin	= 9750,
 	.SRT		= 0,
 };

 static void spl_mx6q_dram_init(enum ddr_config dram_config, bool reset)
 {
 	if (reset)
 		((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;

 	cm_fx6_ddr3_cfg_q.rowaddr = 14;
 	switch (dram_config) {
 	case DDR_16BIT_256MB:
 		cm_fx6_sysinfo_q.dsize = 0;
 		cm_fx6_sysinfo_q.ncs = 1;
 		break;
 	case DDR_32BIT_512MB:
 		cm_fx6_sysinfo_q.dsize = 1;
 		cm_fx6_sysinfo_q.ncs = 1;
 		break;
 	case DDR_64BIT_1GB:
 		cm_fx6_sysinfo_q.dsize = 2;
 		cm_fx6_sysinfo_q.ncs = 1;
 		break;
 	case DDR_64BIT_2GB:
 		cm_fx6_sysinfo_q.dsize = 2;
 		cm_fx6_sysinfo_q.ncs = 2;
 		break;
 	case DDR_64BIT_4GB:
 		cm_fx6_sysinfo_q.dsize = 2;
 		cm_fx6_sysinfo_q.ncs = 2;
 		cm_fx6_ddr3_cfg_q.rowaddr = 15;
 		break;
 	default:
 		puts("Tried to setup invalid DDR configuration\n");
 		hang();
 	}

 	mx6_dram_cfg(&cm_fx6_sysinfo_q, &cm_fx6_calib_q, &cm_fx6_ddr3_cfg_q);
 	udelay(100);
 }

 static int cm_fx6_spl_dram_init(void)
 {
 	unsigned long bank1_size, bank2_size;

 	switch (get_cpu_type()) {
 	case MXC_CPU_MX6SOLO:
 		mx6sdl_dram_iocfg(64, &ddr_iomux_s, &grp_iomux_s);

 		spl_mx6s_dram_init(DDR_32BIT_1GB, false);
 		bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
 		if (bank1_size == 0x40000000)
 			return 0;

 		if (bank1_size == 0x20000000) {
 			spl_mx6s_dram_init(DDR_32BIT_512MB, true);
 			return 0;
 		}

 		spl_mx6s_dram_init(DDR_16BIT_256MB, true);
 		bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
 		if (bank1_size == 0x10000000)
 			return 0;

 		break;
 	case MXC_CPU_MX6D:
 	case MXC_CPU_MX6Q:
 		mx6dq_dram_iocfg(64, &ddr_iomux_q, &grp_iomux_q);

 		spl_mx6q_dram_init(DDR_64BIT_4GB, false);
 		bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
 		if (bank1_size == 0x80000000)
 			return 0;

 		if (bank1_size == 0x40000000) {
 			bank2_size = get_ram_size((long int *)PHYS_SDRAM_2,
 								0x80000000);
 			if (bank2_size == 0x40000000) {
 				/* Don't do a full reset here */
 				spl_mx6q_dram_init(DDR_64BIT_2GB, false);
 			} else {
 				spl_mx6q_dram_init(DDR_64BIT_1GB, true);
 			}

 			return 0;
 		}

 		spl_mx6q_dram_init(DDR_32BIT_512MB, true);
 		bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
 		if (bank1_size == 0x20000000)
 			return 0;

 		spl_mx6q_dram_init(DDR_16BIT_256MB, true);
 		bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
 		if (bank1_size == 0x10000000)
 			return 0;

 		break;
 	}

 	return -1;
 }

 static iomux_v3_cfg_t const uart4_pads[] = {
 	IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 	IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };

 static void cm_fx6_setup_uart(void)
 {
 	SETUP_IOMUX_PADS(uart4_pads);
 	enable_uart_clk(1);
 }

 #ifdef CONFIG_SPL_SPI_SUPPORT
 static void cm_fx6_setup_ecspi(void)
 {
 	cm_fx6_set_ecspi_iomux();
 	enable_cspi_clock(1, 0);
 }
 #else
 static void cm_fx6_setup_ecspi(void) { }
 #endif

 void board_init_f(ulong dummy)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;

 	gd = &gdata;
 	/*
 	 * We don't use DMA in SPL, but we do need it in U-Boot. U-Boot
 	 * initializes DMA very early (before all board code), so the only
 	 * opportunity we have to initialize APBHDMA clocks is in SPL.
 	 */
 	setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
 	enable_usdhc_clk(1, 2);

 	arch_cpu_init();
 	timer_init();
 	cm_fx6_setup_ecspi();
 	cm_fx6_setup_uart();
 	get_clocks();
 	preloader_console_init();
 	gpio_direction_output(CM_FX6_GREEN_LED, 1);
 	if (cm_fx6_spl_dram_init()) {
 		puts("!!!ERROR!!! DRAM detection failed!!!\n");
 		hang();
 	}

 	memset(__bss_start, 0, __bss_end - __bss_start);
 	board_init_r(NULL, 0);
 }

 void spl_board_init(void)
 {
 	u32 boot_device = spl_boot_device();

 	if (boot_device == BOOT_DEVICE_SPI)
 		puts("Booting from SPI flash\n");
 	else if (boot_device == BOOT_DEVICE_MMC1)
 		puts("Booting from MMC\n");
 	else
 		puts("Unknown boot device\n");
 }

 #ifdef CONFIG_SPL_MMC_SUPPORT
 static struct fsl_esdhc_cfg usdhc_cfg = {
 	.esdhc_base = USDHC3_BASE_ADDR,
 	.max_bus_width = 4,
 };

 int board_mmc_init(bd_t *bis)
 {
 	cm_fx6_set_usdhc_iomux();

 	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);

 	return fsl_esdhc_initialize(bis, &usdhc_cfg);
 }
 #endif
	/*
	* SPL specific code for Compulab CM-FX6 board
	*
	* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
	*
	* Author: Nikita Kiryanov <nikita@compulab.co.il>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <spl.h>
	#include <asm/io.h>
	#include <asm/gpio.h>
	#include <asm/arch/mx6-ddr.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/sys_proto.h>
	#include <asm/arch/crm_regs.h>
	#include <asm/imx-common/iomux-v3.h>
	#include <fsl_esdhc.h>
	#include "common.h"

	DECLARE_GLOBAL_DATA_PTR;

	enum ddr_config {
	DDR_16BIT_256MB,
	DDR_32BIT_512MB,
	DDR_32BIT_1GB,
	DDR_64BIT_1GB,
	DDR_64BIT_2GB,
	DDR_64BIT_4GB,
	DDR_UNKNOWN,
	};

	/*
	* Below DRAM_RESET[DDR_SEL] = 0 which is incorrect according to
	* Freescale QRM, but this is exactly the value used by the automatic
	* calibration script and it works also in all our tests, so we leave
	* it as is at this point.
	*/
	#define CM_FX6_DDR_IOMUX_CFG \
	.dram_sdqs0 = 0x00000038, \
	.dram_sdqs1 = 0x00000038, \
	.dram_sdqs2 = 0x00000038, \
	.dram_sdqs3 = 0x00000038, \
	.dram_sdqs4 = 0x00000038, \
	.dram_sdqs5 = 0x00000038, \
	.dram_sdqs6 = 0x00000038, \
	.dram_sdqs7 = 0x00000038, \
	.dram_dqm0 = 0x00000038, \
	.dram_dqm1 = 0x00000038, \
	.dram_dqm2 = 0x00000038, \
	.dram_dqm3 = 0x00000038, \
	.dram_dqm4 = 0x00000038, \
	.dram_dqm5 = 0x00000038, \
	.dram_dqm6 = 0x00000038, \
	.dram_dqm7 = 0x00000038, \
	.dram_cas = 0x00000038, \
	.dram_ras = 0x00000038, \
	.dram_sdclk_0 = 0x00000038, \
	.dram_sdclk_1 = 0x00000038, \
	.dram_sdcke0 = 0x00003000, \
	.dram_sdcke1 = 0x00003000, \
	.dram_reset = 0x00000038, \
	.dram_sdba2 = 0x00000000, \
	.dram_sdodt0 = 0x00000038, \
	.dram_sdodt1 = 0x00000038,

	#define CM_FX6_GPR_IOMUX_CFG \
	.grp_b0ds = 0x00000038, \
	.grp_b1ds = 0x00000038, \
	.grp_b2ds = 0x00000038, \
	.grp_b3ds = 0x00000038, \
	.grp_b4ds = 0x00000038, \
	.grp_b5ds = 0x00000038, \
	.grp_b6ds = 0x00000038, \
	.grp_b7ds = 0x00000038, \
	.grp_addds = 0x00000038, \
	.grp_ddrmode_ctl = 0x00020000, \
	.grp_ddrpke = 0x00000000, \
	.grp_ddrmode = 0x00020000, \
	.grp_ctlds = 0x00000038, \
	.grp_ddr_type = 0x000C0000,

	static struct mx6sdl_iomux_ddr_regs ddr_iomux_s = { CM_FX6_DDR_IOMUX_CFG };
	static struct mx6sdl_iomux_grp_regs grp_iomux_s = { CM_FX6_GPR_IOMUX_CFG };
	static struct mx6dq_iomux_ddr_regs ddr_iomux_q = { CM_FX6_DDR_IOMUX_CFG };
	static struct mx6dq_iomux_grp_regs grp_iomux_q = { CM_FX6_GPR_IOMUX_CFG };

	static struct mx6_mmdc_calibration cm_fx6_calib_s = {
	.p0_mpwldectrl0 = 0x005B0061,
	.p0_mpwldectrl1 = 0x004F0055,
	.p0_mpdgctrl0 = 0x0314030C,
	.p0_mpdgctrl1 = 0x025C0268,
	.p0_mprddlctl = 0x42464646,
	.p0_mpwrdlctl = 0x36322C34,
	};

	static struct mx6_ddr_sysinfo cm_fx6_sysinfo_s = {
	.cs1_mirror = 1,
	.cs_density = 16,
	.bi_on = 1,
	.rtt_nom = 1,
	.rtt_wr = 0,
	.ralat = 5,
	.walat = 1,
	.mif3_mode = 3,
	.rst_to_cke = 0x23,
	.sde_to_rst = 0x10,
	};

	static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_s = {
	.mem_speed = 800,
	.density = 4,
	.rowaddr = 14,
	.coladdr = 10,
	.pagesz = 2,
	.trcd = 1800,
	.trcmin = 5200,
	.trasmin = 3600,
	.SRT = 0,
	};

	static void spl_mx6s_dram_init(enum ddr_config dram_config, bool reset)
	{
	if (reset)
	((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;

	switch (dram_config) {
	case DDR_16BIT_256MB:
	cm_fx6_sysinfo_s.dsize = 0;
	cm_fx6_sysinfo_s.ncs = 1;
	break;
	case DDR_32BIT_512MB:
	cm_fx6_sysinfo_s.dsize = 1;
	cm_fx6_sysinfo_s.ncs = 1;
	break;
	case DDR_32BIT_1GB:
	cm_fx6_sysinfo_s.dsize = 1;
	cm_fx6_sysinfo_s.ncs = 2;
	break;
	default:
	puts("Tried to setup invalid DDR configuration\n");
	hang();
	}

	mx6_dram_cfg(&cm_fx6_sysinfo_s, &cm_fx6_calib_s, &cm_fx6_ddr3_cfg_s);
	udelay(100);
	}

	static struct mx6_mmdc_calibration cm_fx6_calib_q = {
	.p0_mpwldectrl0 = 0x00630068,
	.p0_mpwldectrl1 = 0x0068005D,
	.p0_mpdgctrl0 = 0x04140428,
	.p0_mpdgctrl1 = 0x037C037C,
	.p0_mprddlctl = 0x3C30303A,
	.p0_mpwrdlctl = 0x3A344038,
	.p1_mpwldectrl0 = 0x0035004C,
	.p1_mpwldectrl1 = 0x00170026,
	.p1_mpdgctrl0 = 0x0374037C,
	.p1_mpdgctrl1 = 0x0350032C,
	.p1_mprddlctl = 0x30322A3C,
	.p1_mpwrdlctl = 0x48304A3E,
	};

	static struct mx6_ddr_sysinfo cm_fx6_sysinfo_q = {
	.cs_density = 16,
	.cs1_mirror = 1,
	.bi_on = 1,
	.rtt_nom = 1,
	.rtt_wr = 0,
	.ralat = 5,
	.walat = 1,
	.mif3_mode = 3,
	.rst_to_cke = 0x23,
	.sde_to_rst = 0x10,
	};

	static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_q = {
	.mem_speed = 1066,
	.density = 4,
	.rowaddr = 14,
	.coladdr = 10,
	.pagesz = 2,
	.trcd = 1324,
	.trcmin = 59500,
	.trasmin = 9750,
	.SRT = 0,
	};

	static void spl_mx6q_dram_init(enum ddr_config dram_config, bool reset)
	{
	if (reset)
	((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;

	cm_fx6_ddr3_cfg_q.rowaddr = 14;
	switch (dram_config) {
	case DDR_16BIT_256MB:
	cm_fx6_sysinfo_q.dsize = 0;
	cm_fx6_sysinfo_q.ncs = 1;
	break;
	case DDR_32BIT_512MB:
	cm_fx6_sysinfo_q.dsize = 1;
	cm_fx6_sysinfo_q.ncs = 1;
	break;
	case DDR_64BIT_1GB:
	cm_fx6_sysinfo_q.dsize = 2;
	cm_fx6_sysinfo_q.ncs = 1;
	break;
	case DDR_64BIT_2GB:
	cm_fx6_sysinfo_q.dsize = 2;
	cm_fx6_sysinfo_q.ncs = 2;
	break;
	case DDR_64BIT_4GB:
	cm_fx6_sysinfo_q.dsize = 2;
	cm_fx6_sysinfo_q.ncs = 2;
	cm_fx6_ddr3_cfg_q.rowaddr = 15;
	break;
	default:
	puts("Tried to setup invalid DDR configuration\n");
	hang();
	}

	mx6_dram_cfg(&cm_fx6_sysinfo_q, &cm_fx6_calib_q, &cm_fx6_ddr3_cfg_q);
	udelay(100);
	}

	static int cm_fx6_spl_dram_init(void)
	{
	unsigned long bank1_size, bank2_size;

	switch (get_cpu_type()) {
	case MXC_CPU_MX6SOLO:
	mx6sdl_dram_iocfg(64, &ddr_iomux_s, &grp_iomux_s);

	spl_mx6s_dram_init(DDR_32BIT_1GB, false);
	bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
	if (bank1_size == 0x40000000)
	return 0;

	if (bank1_size == 0x20000000) {
	spl_mx6s_dram_init(DDR_32BIT_512MB, true);
	return 0;
	}

	spl_mx6s_dram_init(DDR_16BIT_256MB, true);
	bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
	if (bank1_size == 0x10000000)
	return 0;

	break;
	case MXC_CPU_MX6D:
	case MXC_CPU_MX6Q:
	mx6dq_dram_iocfg(64, &ddr_iomux_q, &grp_iomux_q);

	spl_mx6q_dram_init(DDR_64BIT_4GB, false);
	bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
	if (bank1_size == 0x80000000)
	return 0;

	if (bank1_size == 0x40000000) {
	bank2_size = get_ram_size((long int *)PHYS_SDRAM_2,
	0x80000000);
	if (bank2_size == 0x40000000) {
	/* Don't do a full reset here */
	spl_mx6q_dram_init(DDR_64BIT_2GB, false);
	} else {
	spl_mx6q_dram_init(DDR_64BIT_1GB, true);
	}

	return 0;
	}

	spl_mx6q_dram_init(DDR_32BIT_512MB, true);
	bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
	if (bank1_size == 0x20000000)
	return 0;

	spl_mx6q_dram_init(DDR_16BIT_256MB, true);
	bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
	if (bank1_size == 0x10000000)
	return 0;

	break;
	}

	return -1;
	}

	static iomux_v3_cfg_t const uart4_pads[] = {
	IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL)),
	IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL)),
	};

	static void cm_fx6_setup_uart(void)
	{
	SETUP_IOMUX_PADS(uart4_pads);
	enable_uart_clk(1);
	}

	#ifdef CONFIG_SPL_SPI_SUPPORT
	static void cm_fx6_setup_ecspi(void)
	{
	cm_fx6_set_ecspi_iomux();
	enable_cspi_clock(1, 0);
	}
	#else
	static void cm_fx6_setup_ecspi(void) { }
	#endif

	void board_init_f(ulong dummy)
	{
	struct mxc_ccm_reg mxc_ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;

	gd = &gdata;
	/*
	* We don't use DMA in SPL, but we do need it in U-Boot. U-Boot
	* initializes DMA very early (before all board code), so the only
	* opportunity we have to initialize APBHDMA clocks is in SPL.
	*/
	setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
	enable_usdhc_clk(1, 2);

	arch_cpu_init();
	timer_init();
	cm_fx6_setup_ecspi();
	cm_fx6_setup_uart();
	get_clocks();
	preloader_console_init();
	gpio_direction_output(CM_FX6_GREEN_LED, 1);
	if (cm_fx6_spl_dram_init()) {
	puts("!!!ERROR!!! DRAM detection failed!!!\n");
	hang();
	}

	memset(__bss_start, 0, __bss_end - __bss_start);
	board_init_r(NULL, 0);
	}

	void spl_board_init(void)
	{
	u32 boot_device = spl_boot_device();

	if (boot_device == BOOT_DEVICE_SPI)
	puts("Booting from SPI flash\n");
	else if (boot_device == BOOT_DEVICE_MMC1)
	puts("Booting from MMC\n");
	else
	puts("Unknown boot device\n");
	}

	#ifdef CONFIG_SPL_MMC_SUPPORT
	static struct fsl_esdhc_cfg usdhc_cfg = {
	.esdhc_base = USDHC3_BASE_ADDR,
	.max_bus_width = 4,
	};

	int board_mmc_init(bd_t *bis)
	{
	cm_fx6_set_usdhc_iomux();

	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);

	return fsl_esdhc_initialize(bis, &usdhc_cfg);
	}
	#endif