board/ipek01/ipek01.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2003-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004
  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
  *
  * (C) Copyright 2006
  * MicroSys GmbH
  *
  * (C) Copyright 2009
  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <netdev.h>
 #include <miiphy.h>
 #include <libfdt.h>
 #include <mb862xx.h>
 #include <video_fb.h>
 #include <asm/processor.h>
 #include <asm/io.h>

 #ifdef CONFIG_OF_LIBFDT
 #include <fdt_support.h>
 #endif /* CONFIG_OF_LIBFDT */

 /* mt46v16m16-75 */
 #ifdef CONFIG_MPC5200_DDR
 /* Settings for XLB = 132 MHz */
 #define SDRAM_MODE	0x018D0000
 #define SDRAM_EMODE	0x40090000
 #define SDRAM_CONTROL	0x714f0f00
 #define SDRAM_CONFIG1	0x73722930
 #define SDRAM_CONFIG2	0x47770000
 #define SDRAM_TAPDELAY	0x10000000
 #else
 #error SDRAM is not supported on this board
 #endif

 DECLARE_GLOBAL_DATA_PTR;

 static void sdram_start (int hi_addr)
 {
 	struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;

 	/* unlock mode register */
 	out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit);

 	/* precharge all banks */
 	out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit);

 	/* set mode register: extended mode */
 	out_be32 (&sdram->mode, SDRAM_EMODE);

 	/* set mode register: reset DLL */
 	out_be32 (&sdram->mode, SDRAM_MODE | 0x04000000);

 	/* precharge all banks */
 	out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit);

 	/* auto refresh */
 	out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit);

 	/* set mode register */
 	out_be32 (&sdram->mode, SDRAM_MODE);

 	/* normal operation */
 	out_be32 (&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit);
 }

 /*
  * ATTENTION: Although partially referenced initdram does NOT make real
  *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if
  *	      CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
  */

 phys_size_t initdram (int board_type)
 {
 	struct mpc5xxx_mmap_ctl *mmap_ctl =
 		(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
 	struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
 	struct mpc5xxx_cdm *cdm = (struct mpc5xxx_cdm *)MPC5XXX_CDM;
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
 	ulong test1, test2;

 	/* setup SDRAM chip selects */
 	out_be32 (&mmap_ctl->sdram0, 0x0000001e);	/* 2G at 0x0 */
 	out_be32 (&mmap_ctl->sdram1, 0x00000000);	/* disabled */

 	/* setup config registers */
 	out_be32 (&sdram->config1, SDRAM_CONFIG1);
 	out_be32 (&sdram->config2, SDRAM_CONFIG2);

 	/* set tap delay */
 	out_be32 (&cdm->porcfg, SDRAM_TAPDELAY);

 	/* find RAM size using SDRAM CS0 only */
 	sdram_start (0);
 	test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start (1);
 	test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start (0);
 		dramsize = test1;
 	} else {
 		dramsize = test2;
 	}

 	/* memory smaller than 1MB is impossible */
 	if (dramsize < (1 << 20))
 		dramsize = 0;

 	/* set SDRAM CS0 size according to the amount of RAM found */
 	if (dramsize > 0)
 		out_be32 (&mmap_ctl->sdram0,
 			  0x13 + __builtin_ffs (dramsize >> 20) - 1);
 	else
 		out_be32 (&mmap_ctl->sdram1, 0);	/* disabled */

 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
 	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
 	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
 	 *
 	 * "The SDelay should be written to a value of 0x00000004. It is
 	 * required to account for changes caused by normal wafer processing
 	 * parameters."
 	 */
 	out_be32 (&sdram->sdelay, 0x04);

 	return dramsize + dramsize2;
 }

 int checkboard (void)
 {
 	puts ("Board: IPEK01 \n");
 	return 0;
 }

 void flash_preinit (void)
 {
 	struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB;

 	/*
 	 * Now, when we are in RAM, enable flash write
 	 * access for detection process.
 	 * Note that CS_BOOT cannot be cleared when
 	 * executing in flash.
 	 */
 	clrbits_be32 (&lpb->cs0_cfg, 0x1);	/* clear RO */
 }

 void flash_afterinit (ulong start, ulong size)
 {
 	struct mpc5xxx_mmap_ctl *mmap_ctl =
 		(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;

 #if defined(CONFIG_BOOT_ROM)
 	/* adjust mapping */
 	out_be32 (&mmap_ctl->cs1_start, START_REG (start));
 	out_be32 (&mmap_ctl->cs1_stop, STOP_REG (start, size));
 #else
 	/* adjust mapping */
 	out_be32 (&mmap_ctl->boot_start, START_REG (start));
 	out_be32 (&mmap_ctl->cs0_start, START_REG (start));
 	out_be32 (&mmap_ctl->boot_stop, STOP_REG (start, size));
 	out_be32 (&mmap_ctl->cs0_stop, STOP_REG (start, size));
 #endif
 }

 extern flash_info_t flash_info[];	/* info for FLASH chips */

 int misc_init_r (void)
 {
 	/* adjust flash start */
 	gd->bd->bi_flashstart = flash_info[0].start[0];
 	return (0);
 }

 #ifdef	CONFIG_PCI
 static struct pci_controller hose;

 extern void pci_mpc5xxx_init (struct pci_controller *);

 void pci_init_board (void)
 {
 	pci_mpc5xxx_init (&hose);
 }
 #endif

 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup (void *blob, bd_t * bd)
 {
 	ft_cpu_setup (blob, bd);
 	fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

 int board_eth_init(bd_t *bis)
 {
 	cpu_eth_init(bis); /* Built in FEC comes first */
 	return pci_eth_init(bis);
 }

 #ifdef CONFIG_VIDEO
 extern GraphicDevice mb862xx;

 static const gdc_regs init_regs[] = {
 	{0x0100, 0x00000900},
 	{0x0020, 0x80190257},
 	{0x0024, 0x00000000},
 	{0x0028, 0x00000000},
 	{0x002c, 0x00000000},
 	{0x0110, 0x00000000},
 	{0x0114, 0x00000000},
 	{0x0118, 0x02570320},
 	{0x0004, 0x041f0000},
 	{0x0008, 0x031f031f},
 	{0x000c, 0x067f0347},
 	{0x0010, 0x02780000},
 	{0x0014, 0x0257025c},
 	{0x0018, 0x00000000},
 	{0x001c, 0x02570320},
 	{0x0100, 0x80010900},
 	{0x0, 0x0}
 };

 const gdc_regs *board_get_regs (void)
 {
 	return init_regs;
 }

 /* Returns Lime base address */
 unsigned int board_video_init (void)
 {
 	if (mb862xx_probe (CONFIG_SYS_LIME_BASE) != MB862XX_TYPE_LIME)
 		return 0;

 	mb862xx.winSizeX = 800;
 	mb862xx.winSizeY = 600;
 	mb862xx.gdfIndex = GDF_15BIT_555RGB;
 	mb862xx.gdfBytesPP = 2;

 	return CONFIG_SYS_LIME_BASE;
 }

 #if defined(CONFIG_CONSOLE_EXTRA_INFO)
 /*
  * Return text to be printed besides the logo.
  */
 void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1)
 		strcpy (info, " Board: IPEK01");
 	else
 		info[0] = '\0';
 }
 #endif
 #endif /* CONFIG_VIDEO */
	/*
	* (C) Copyright 2003-2004
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* (C) Copyright 2004
	* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
	*
	* (C) Copyright 2006
	* MicroSys GmbH
	*
	* (C) Copyright 2009
	* Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <mpc5xxx.h>
	#include <pci.h>
	#include <netdev.h>
	#include <miiphy.h>
	#include <libfdt.h>
	#include <mb862xx.h>
	#include <video_fb.h>
	#include <asm/processor.h>
	#include <asm/io.h>

	#ifdef CONFIG_OF_LIBFDT
	#include <fdt_support.h>
	#endif /* CONFIG_OF_LIBFDT */

	/* mt46v16m16-75 */
	#ifdef CONFIG_MPC5200_DDR
	/* Settings for XLB = 132 MHz */
	#define SDRAM_MODE 0x018D0000
	#define SDRAM_EMODE 0x40090000
	#define SDRAM_CONTROL 0x714f0f00
	#define SDRAM_CONFIG1 0x73722930
	#define SDRAM_CONFIG2 0x47770000
	#define SDRAM_TAPDELAY 0x10000000
	#else
	#error SDRAM is not supported on this board
	#endif

	DECLARE_GLOBAL_DATA_PTR;

	static void sdram_start (int hi_addr)
	{
	struct mpc5xxx_sdram sdram = (struct mpc5xxx_sdram )MPC5XXX_SDRAM;
	long hi_addr_bit = hi_addr ? 0x01000000 : 0;

	/* unlock mode register */
	out_be32 (&sdram->ctrl, SDRAM_CONTROL \| 0x80000000 \| hi_addr_bit);

	/* precharge all banks */
	out_be32 (&sdram->ctrl, SDRAM_CONTROL \| 0x80000002 \| hi_addr_bit);

	/* set mode register: extended mode */
	out_be32 (&sdram->mode, SDRAM_EMODE);

	/* set mode register: reset DLL */
	out_be32 (&sdram->mode, SDRAM_MODE \| 0x04000000);

	/* precharge all banks */
	out_be32 (&sdram->ctrl, SDRAM_CONTROL \| 0x80000002 \| hi_addr_bit);

	/* auto refresh */
	out_be32 (&sdram->ctrl, SDRAM_CONTROL \| 0x80000004 \| hi_addr_bit);

	/* set mode register */
	out_be32 (&sdram->mode, SDRAM_MODE);

	/* normal operation */
	out_be32 (&sdram->ctrl, SDRAM_CONTROL \| hi_addr_bit);
	}

	/*
	* ATTENTION: Although partially referenced initdram does NOT make real
	* use of CONFIG_SYS_SDRAM_BASE. The code does not work if
	* CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
	*/

	phys_size_t initdram (int board_type)
	{
	struct mpc5xxx_mmap_ctl *mmap_ctl =
	(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
	struct mpc5xxx_sdram sdram = (struct mpc5xxx_sdram )MPC5XXX_SDRAM;
	struct mpc5xxx_cdm cdm = (struct mpc5xxx_cdm )MPC5XXX_CDM;
	ulong dramsize = 0;
	ulong dramsize2 = 0;
	ulong test1, test2;

	/* setup SDRAM chip selects */
	out_be32 (&mmap_ctl->sdram0, 0x0000001e); /* 2G at 0x0 */
	out_be32 (&mmap_ctl->sdram1, 0x00000000); /* disabled */

	/* setup config registers */
	out_be32 (&sdram->config1, SDRAM_CONFIG1);
	out_be32 (&sdram->config2, SDRAM_CONFIG2);

	/* set tap delay */
	out_be32 (&cdm->porcfg, SDRAM_TAPDELAY);

	/* find RAM size using SDRAM CS0 only */
	sdram_start (0);
	test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
	sdram_start (1);
	test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
	if (test1 > test2) {
	sdram_start (0);
	dramsize = test1;
	} else {
	dramsize = test2;
	}

	/* memory smaller than 1MB is impossible */
	if (dramsize < (1 << 20))
	dramsize = 0;

	/* set SDRAM CS0 size according to the amount of RAM found */
	if (dramsize > 0)
	out_be32 (&mmap_ctl->sdram0,
	0x13 + __builtin_ffs (dramsize >> 20) - 1);
	else
	out_be32 (&mmap_ctl->sdram1, 0); /* disabled */

	/*
	* On MPC5200B we need to set the special configuration delay in the
	* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
	* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
	*
	* "The SDelay should be written to a value of 0x00000004. It is
	* required to account for changes caused by normal wafer processing
	* parameters."
	*/
	out_be32 (&sdram->sdelay, 0x04);

	return dramsize + dramsize2;
	}

	int checkboard (void)
	{
	puts ("Board: IPEK01 \n");
	return 0;
	}

	void flash_preinit (void)
	{
	struct mpc5xxx_lpb lpb = (struct mpc5xxx_lpb )MPC5XXX_LPB;

	/*
	* Now, when we are in RAM, enable flash write
	* access for detection process.
	* Note that CS_BOOT cannot be cleared when
	* executing in flash.
	*/
	clrbits_be32 (&lpb->cs0_cfg, 0x1); /* clear RO */
	}

	void flash_afterinit (ulong start, ulong size)
	{
	struct mpc5xxx_mmap_ctl *mmap_ctl =
	(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;

	#if defined(CONFIG_BOOT_ROM)
	/* adjust mapping */
	out_be32 (&mmap_ctl->cs1_start, START_REG (start));
	out_be32 (&mmap_ctl->cs1_stop, STOP_REG (start, size));
	#else
	/* adjust mapping */
	out_be32 (&mmap_ctl->boot_start, START_REG (start));
	out_be32 (&mmap_ctl->cs0_start, START_REG (start));
	out_be32 (&mmap_ctl->boot_stop, STOP_REG (start, size));
	out_be32 (&mmap_ctl->cs0_stop, STOP_REG (start, size));
	#endif
	}

	extern flash_info_t flash_info[]; /* info for FLASH chips */

	int misc_init_r (void)
	{
	/* adjust flash start */
	gd->bd->bi_flashstart = flash_info[0].start[0];
	return (0);
	}

	#ifdef CONFIG_PCI
	static struct pci_controller hose;

	extern void pci_mpc5xxx_init (struct pci_controller *);

	void pci_init_board (void)
	{
	pci_mpc5xxx_init (&hose);
	}
	#endif

	#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
	void ft_board_setup (void blob, bd_t bd)
	{
	ft_cpu_setup (blob, bd);
	fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize);
	}
	#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

	int board_eth_init(bd_t *bis)
	{
	cpu_eth_init(bis); /* Built in FEC comes first */
	return pci_eth_init(bis);
	}

	#ifdef CONFIG_VIDEO
	extern GraphicDevice mb862xx;

	static const gdc_regs init_regs[] = {
	{0x0100, 0x00000900},
	{0x0020, 0x80190257},
	{0x0024, 0x00000000},
	{0x0028, 0x00000000},
	{0x002c, 0x00000000},
	{0x0110, 0x00000000},
	{0x0114, 0x00000000},
	{0x0118, 0x02570320},
	{0x0004, 0x041f0000},
	{0x0008, 0x031f031f},
	{0x000c, 0x067f0347},
	{0x0010, 0x02780000},
	{0x0014, 0x0257025c},
	{0x0018, 0x00000000},
	{0x001c, 0x02570320},
	{0x0100, 0x80010900},
	{0x0, 0x0}
	};

	const gdc_regs *board_get_regs (void)
	{
	return init_regs;
	}

	/* Returns Lime base address */
	unsigned int board_video_init (void)
	{
	if (mb862xx_probe (CONFIG_SYS_LIME_BASE) != MB862XX_TYPE_LIME)
	return 0;

	mb862xx.winSizeX = 800;
	mb862xx.winSizeY = 600;
	mb862xx.gdfIndex = GDF_15BIT_555RGB;
	mb862xx.gdfBytesPP = 2;

	return CONFIG_SYS_LIME_BASE;
	}

	#if defined(CONFIG_CONSOLE_EXTRA_INFO)
	/*
	* Return text to be printed besides the logo.
	*/
	void video_get_info_str (int line_number, char *info)
	{
	if (line_number == 1)
	strcpy (info, " Board: IPEK01");
	else
	info[0] = '\0';
	}
	#endif
	#endif /* CONFIG_VIDEO */