board/freescale/t1040qds/t1040qds.c - github/trini/u-boot - Gitiles

 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <command.h>
 #include <i2c.h>
 #include <netdev.h>
 #include <linux/compiler.h>
 #include <asm/mmu.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>

 #include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "t1040qds.h"
 #include "t1040qds_qixis.h"

 DECLARE_GLOBAL_DATA_PTR;

 int checkboard(void)
 {
 	char buf[64];
 	u8 sw;
 	struct cpu_type *cpu = gd->arch.cpu;
 	static const char *const freq[] = {"100", "125", "156.25", "161.13",
 						"122.88", "122.88", "122.88"};
 	int clock;

 	printf("Board: %sQDS, ", cpu->name);
 	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
 	       QIXIS_READ(id), QIXIS_READ(arch));

 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;

 	if (sw < 0x8)
 		printf("vBank: %d\n", sw);
 	else if (sw == 0x8)
 		puts("PromJet\n");
 	else if (sw == 0x9)
 		puts("NAND\n");
 	else if (sw == 0x15)
 		printf("IFCCard\n");
 	else
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);

 	printf("FPGA: v%d (%s), build %d",
 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
 	       (int)qixis_read_minor());
 	/* the timestamp string contains "\n" at the end */
 	printf(" on %s", qixis_read_time(buf));

 	/*
 	 * Display the actual SERDES reference clocks as configured by the
 	 * dip switches on the board.  Note that the SWx registers could
 	 * technically be set to force the reference clocks to match the
 	 * values that the SERDES expects (or vice versa).  For now, however,
 	 * we just display both values and hope the user notices when they
 	 * don't match.
 	 */
 	puts("SERDES Reference: ");
 	sw = QIXIS_READ(brdcfg[2]);
 	clock = (sw >> 6) & 3;
 	printf("Clock1=%sMHz ", freq[clock]);
 	clock = (sw >> 4) & 3;
 	printf("Clock2=%sMHz\n", freq[clock]);

 	return 0;
 }

 int select_i2c_ch_pca9547(u8 ch)
 {
 	int ret;

 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
 	}

 	return 0;
 }

 static void qe_board_setup(void)
 {
 	u8 brdcfg15, brdcfg9;

 	if (hwconfig("qe") && hwconfig("tdm")) {
 		brdcfg15 = QIXIS_READ(brdcfg[15]);
 		/*
 		 * TDMRiser uses QE-TDM
 		 * Route QE_TDM signals to TDM Riser slot
 		 */
 		QIXIS_WRITE(brdcfg[15], brdcfg15 | 7);
 	} else if (hwconfig("qe") && hwconfig("uart")) {
 		brdcfg15 = QIXIS_READ(brdcfg[15]);
 		brdcfg9 = QIXIS_READ(brdcfg[9]);
 		/*
 		 * Route QE_TDM signals to UCC
 		 * ProfiBus controlled by UCC3
 		 */
 		brdcfg15 &= 0xfc;
 		QIXIS_WRITE(brdcfg[15], brdcfg15 | 2);
 		QIXIS_WRITE(brdcfg[9], brdcfg9 | 4);
 	}
 }

 int board_early_init_f(void)
 {
 #if defined(CONFIG_DEEP_SLEEP)
 	if (is_warm_boot())
 		fsl_dp_disable_console();
 #endif

 	return 0;
 }

 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	int flash_esel = find_tlb_idx((void *)flashbase, 1);

 	/*
 	 * Remap Boot flash + PROMJET region to caching-inhibited
 	 * so that flash can be erased properly.
 	 */

 	/* Flush d-cache and invalidate i-cache of any FLASH data */
 	flush_dcache();
 	invalidate_icache();

 	if (flash_esel == -1) {
 		/* very unlikely unless something is messed up */
 		puts("Error: Could not find TLB for FLASH BASE\n");
 		flash_esel = 2;	/* give our best effort to continue */
 	} else {
 		/* invalidate existing TLB entry for flash + promjet */
 		disable_tlb(flash_esel);
 	}

 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 #endif
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);

 	return 0;
 }

 unsigned long get_board_sys_clk(void)
 {
 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);

 	switch (sysclk_conf & 0x0F) {
 	case QIXIS_SYSCLK_64:
 		return 64000000;
 	case QIXIS_SYSCLK_83:
 		return 83333333;
 	case QIXIS_SYSCLK_100:
 		return 100000000;
 	case QIXIS_SYSCLK_125:
 		return 125000000;
 	case QIXIS_SYSCLK_133:
 		return 133333333;
 	case QIXIS_SYSCLK_150:
 		return 150000000;
 	case QIXIS_SYSCLK_160:
 		return 160000000;
 	case QIXIS_SYSCLK_166:
 		return 166666666;
 	}
 	return 66666666;
 }

 unsigned long get_board_ddr_clk(void)
 {
 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);

 	switch ((ddrclk_conf & 0x30) >> 4) {
 	case QIXIS_DDRCLK_100:
 		return 100000000;
 	case QIXIS_DDRCLK_125:
 		return 125000000;
 	case QIXIS_DDRCLK_133:
 		return 133333333;
 	}
 	return 66666666;
 }

 #define NUM_SRDS_BANKS	2
 int misc_init_r(void)
 {
 	u8 sw;
 	serdes_corenet_t *srds_regs =
 		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
 	u32 actual[NUM_SRDS_BANKS] = { 0 };
 	int i;

 	sw = QIXIS_READ(brdcfg[2]);
 	for (i = 0; i < NUM_SRDS_BANKS; i++) {
 		unsigned int clock = (sw >> (6 - 2 * i)) & 3;
 		switch (clock) {
 		case 0:
 			actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
 			break;
 		case 1:
 			actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
 			break;
 		case 2:
 			actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
 			break;
 		}
 	}

 	puts("SerDes1");
 	for (i = 0; i < NUM_SRDS_BANKS; i++) {
 		u32 pllcr0 = srds_regs->bank[i].pllcr0;
 		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
 		if (expected != actual[i]) {
 			printf("expects ref clk%d %sMHz, but actual is %sMHz\n",
 			       i + 1, serdes_clock_to_string(expected),
 			       serdes_clock_to_string(actual[i]));
 		}
 	}

 	qe_board_setup();

 	return 0;
 }

 int ft_board_setup(void *blob, bd_t *bd)
 {
 	phys_addr_t base;
 	phys_size_t size;

 	ft_cpu_setup(blob, bd);

 	base = getenv_bootm_low();
 	size = getenv_bootm_size();

 	fdt_fixup_memory(blob, (u64)base, (u64)size);

 #ifdef CONFIG_PCI
 	pci_of_setup(blob, bd);
 #endif

 	fdt_fixup_liodn(blob);

 #ifdef CONFIG_HAS_FSL_DR_USB
 	fsl_fdt_fixup_dr_usb(blob, bd);
 #endif

 #ifdef CONFIG_SYS_DPAA_FMAN
 	fdt_fixup_fman_ethernet(blob);
 	fdt_fixup_board_enet(blob);
 #endif

 	return 0;
 }

 void qixis_dump_switch(void)
 {
 	int i, nr_of_cfgsw;

 	QIXIS_WRITE(cms[0], 0x00);
 	nr_of_cfgsw = QIXIS_READ(cms[1]);

 	puts("DIP switch settings dump:\n");
 	for (i = 1; i <= nr_of_cfgsw; i++) {
 		QIXIS_WRITE(cms[0], i);
 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
 	}
 }

 int board_need_mem_reset(void)
 {
 	return 1;
 }
	/*
	* Copyright 2013 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <command.h>
	#include <i2c.h>
	#include <netdev.h>
	#include <linux/compiler.h>
	#include <asm/mmu.h>
	#include <asm/processor.h>
	#include <asm/cache.h>
	#include <asm/immap_85xx.h>
	#include <asm/fsl_law.h>
	#include <asm/fsl_serdes.h>
	#include <asm/fsl_liodn.h>
	#include <fm_eth.h>
	#include <hwconfig.h>

	#include "../common/sleep.h"
	#include "../common/qixis.h"
	#include "t1040qds.h"
	#include "t1040qds_qixis.h"

	DECLARE_GLOBAL_DATA_PTR;

	int checkboard(void)
	{
	char buf[64];
	u8 sw;
	struct cpu_type *cpu = gd->arch.cpu;
	static const char *const freq[] = {"100", "125", "156.25", "161.13",
	"122.88", "122.88", "122.88"};
	int clock;

	printf("Board: %sQDS, ", cpu->name);
	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
	QIXIS_READ(id), QIXIS_READ(arch));

	sw = QIXIS_READ(brdcfg[0]);
	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;

	if (sw < 0x8)
	printf("vBank: %d\n", sw);
	else if (sw == 0x8)
	puts("PromJet\n");
	else if (sw == 0x9)
	puts("NAND\n");
	else if (sw == 0x15)
	printf("IFCCard\n");
	else
	printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);

	printf("FPGA: v%d (%s), build %d",
	(int)QIXIS_READ(scver), qixis_read_tag(buf),
	(int)qixis_read_minor());
	/* the timestamp string contains "\n" at the end */
	printf(" on %s", qixis_read_time(buf));

	/*
	* Display the actual SERDES reference clocks as configured by the
	* dip switches on the board. Note that the SWx registers could
	* technically be set to force the reference clocks to match the
	* values that the SERDES expects (or vice versa). For now, however,
	* we just display both values and hope the user notices when they
	* don't match.
	*/
	puts("SERDES Reference: ");
	sw = QIXIS_READ(brdcfg[2]);
	clock = (sw >> 6) & 3;
	printf("Clock1=%sMHz ", freq[clock]);
	clock = (sw >> 4) & 3;
	printf("Clock2=%sMHz\n", freq[clock]);

	return 0;
	}

	int select_i2c_ch_pca9547(u8 ch)
	{
	int ret;

	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
	if (ret) {
	puts("PCA: failed to select proper channel\n");
	return ret;
	}

	return 0;
	}

	static void qe_board_setup(void)
	{
	u8 brdcfg15, brdcfg9;

	if (hwconfig("qe") && hwconfig("tdm")) {
	brdcfg15 = QIXIS_READ(brdcfg[15]);
	/*
	* TDMRiser uses QE-TDM
	* Route QE_TDM signals to TDM Riser slot
	*/
	QIXIS_WRITE(brdcfg[15], brdcfg15 \| 7);
	} else if (hwconfig("qe") && hwconfig("uart")) {
	brdcfg15 = QIXIS_READ(brdcfg[15]);
	brdcfg9 = QIXIS_READ(brdcfg[9]);
	/*
	* Route QE_TDM signals to UCC
	* ProfiBus controlled by UCC3
	*/
	brdcfg15 &= 0xfc;
	QIXIS_WRITE(brdcfg[15], brdcfg15 \| 2);
	QIXIS_WRITE(brdcfg[9], brdcfg9 \| 4);
	}
	}

	int board_early_init_f(void)
	{
	#if defined(CONFIG_DEEP_SLEEP)
	if (is_warm_boot())
	fsl_dp_disable_console();
	#endif

	return 0;
	}

	int board_early_init_r(void)
	{
	#ifdef CONFIG_SYS_FLASH_BASE
	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
	int flash_esel = find_tlb_idx((void *)flashbase, 1);

	/*
	* Remap Boot flash + PROMJET region to caching-inhibited
	* so that flash can be erased properly.
	*/

	/* Flush d-cache and invalidate i-cache of any FLASH data */
	flush_dcache();
	invalidate_icache();

	if (flash_esel == -1) {
	/* very unlikely unless something is messed up */
	puts("Error: Could not find TLB for FLASH BASE\n");
	flash_esel = 2; /* give our best effort to continue */
	} else {
	/* invalidate existing TLB entry for flash + promjet */
	disable_tlb(flash_esel);
	}

	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
	MAS3_SX\|MAS3_SW\|MAS3_SR, MAS2_I\|MAS2_G,
	0, flash_esel, BOOKE_PAGESZ_256M, 1);
	#endif
	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);

	return 0;
	}

	unsigned long get_board_sys_clk(void)
	{
	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);

	switch (sysclk_conf & 0x0F) {
	case QIXIS_SYSCLK_64:
	return 64000000;
	case QIXIS_SYSCLK_83:
	return 83333333;
	case QIXIS_SYSCLK_100:
	return 100000000;
	case QIXIS_SYSCLK_125:
	return 125000000;
	case QIXIS_SYSCLK_133:
	return 133333333;
	case QIXIS_SYSCLK_150:
	return 150000000;
	case QIXIS_SYSCLK_160:
	return 160000000;
	case QIXIS_SYSCLK_166:
	return 166666666;
	}
	return 66666666;
	}

	unsigned long get_board_ddr_clk(void)
	{
	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);

	switch ((ddrclk_conf & 0x30) >> 4) {
	case QIXIS_DDRCLK_100:
	return 100000000;
	case QIXIS_DDRCLK_125:
	return 125000000;
	case QIXIS_DDRCLK_133:
	return 133333333;
	}
	return 66666666;
	}

	#define NUM_SRDS_BANKS 2
	int misc_init_r(void)
	{
	u8 sw;
	serdes_corenet_t *srds_regs =
	(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
	u32 actual[NUM_SRDS_BANKS] = { 0 };
	int i;

	sw = QIXIS_READ(brdcfg[2]);
	for (i = 0; i < NUM_SRDS_BANKS; i++) {
	unsigned int clock = (sw >> (6 - 2 * i)) & 3;
	switch (clock) {
	case 0:
	actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
	break;
	case 1:
	actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
	break;
	case 2:
	actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
	break;
	}
	}

	puts("SerDes1");
	for (i = 0; i < NUM_SRDS_BANKS; i++) {
	u32 pllcr0 = srds_regs->bank[i].pllcr0;
	u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
	if (expected != actual[i]) {
	printf("expects ref clk%d %sMHz, but actual is %sMHz\n",
	i + 1, serdes_clock_to_string(expected),
	serdes_clock_to_string(actual[i]));
	}
	}

	qe_board_setup();

	return 0;
	}

	int ft_board_setup(void blob, bd_t bd)
	{
	phys_addr_t base;
	phys_size_t size;

	ft_cpu_setup(blob, bd);

	base = getenv_bootm_low();
	size = getenv_bootm_size();

	fdt_fixup_memory(blob, (u64)base, (u64)size);

	#ifdef CONFIG_PCI
	pci_of_setup(blob, bd);
	#endif

	fdt_fixup_liodn(blob);

	#ifdef CONFIG_HAS_FSL_DR_USB
	fsl_fdt_fixup_dr_usb(blob, bd);
	#endif

	#ifdef CONFIG_SYS_DPAA_FMAN
	fdt_fixup_fman_ethernet(blob);
	fdt_fixup_board_enet(blob);
	#endif

	return 0;
	}

	void qixis_dump_switch(void)
	{
	int i, nr_of_cfgsw;

	QIXIS_WRITE(cms[0], 0x00);
	nr_of_cfgsw = QIXIS_READ(cms[1]);

	puts("DIP switch settings dump:\n");
	for (i = 1; i <= nr_of_cfgsw; i++) {
	QIXIS_WRITE(cms[0], i);
	printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
	}
	}

	int board_need_mem_reset(void)
	{
	return 1;
	}