| /* |
| * Copyright 2015 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <asm/io.h> |
| #include <netdev.h> |
| #include <fm_eth.h> |
| #include <fsl_dtsec.h> |
| #include <fsl_mdio.h> |
| #include <malloc.h> |
| |
| #include "../common/fman.h" |
| |
| int board_eth_init(bd_t *bis) |
| { |
| #ifdef CONFIG_FMAN_ENET |
| int i; |
| struct memac_mdio_info dtsec_mdio_info; |
| struct memac_mdio_info tgec_mdio_info; |
| struct mii_dev *dev; |
| u32 srds_s1; |
| struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| |
| srds_s1 = in_be32(&gur->rcwsr[4]) & |
| FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; |
| srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| |
| dtsec_mdio_info.regs = |
| (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; |
| |
| dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; |
| |
| /* Register the 1G MDIO bus */ |
| fm_memac_mdio_init(bis, &dtsec_mdio_info); |
| |
| tgec_mdio_info.regs = |
| (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; |
| tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; |
| |
| /* Register the 10G MDIO bus */ |
| fm_memac_mdio_init(bis, &tgec_mdio_info); |
| |
| /* Set the two on-board RGMII PHY address */ |
| fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); |
| |
| /* QSGMII on lane B, MAC 1/2/5/6 */ |
| fm_info_set_phy_address(FM1_DTSEC1, QSGMII_PORT1_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, QSGMII_PORT2_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC5, QSGMII_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, QSGMII_PORT4_PHY_ADDR); |
| |
| switch (srds_s1) { |
| case 0x1455: |
| break; |
| default: |
| printf("Invalid SerDes protocol 0x%x for LS1043ARDB\n", |
| srds_s1); |
| break; |
| } |
| |
| dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); |
| for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) |
| fm_info_set_mdio(i, dev); |
| |
| /* XFI on lane A, MAC 9 */ |
| fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); |
| dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); |
| fm_info_set_mdio(FM1_10GEC1, dev); |
| |
| cpu_eth_init(bis); |
| #endif |
| |
| return pci_eth_init(bis); |
| } |