blob: eb5ed2f35ae8fed7d843017c0f58a0820df719a0 [file] [log] [blame]
/*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Configuation settings for the LUBBOCK board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
#define CONFIG_INIT_CRITICAL /* undef for developing */
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Size of malloc() pool
*/
#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
*/
/*
* select serial console configuration
*/
#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 192.168.0.21
#define CONFIG_SERVERIP 192.168.0.250
#define CONFIG_BOOTCOMMAND "FIXME"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0xa8000000 /* default load address */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
#define CFG_DRAM_BASE 0xa0000000
#define CFG_DRAM_SIZE 0x04000000
#define CFG_FLASH_BASE PHYS_FLASH_1
#define FPGA_REGS_BASE_PHYSICAL 0x08000000
/*
* GPIO settings
*/
#define CFG_GPSR0_VAL 0x00008000
#define CFG_GPSR1_VAL 0x00FC0382
#define CFG_GPSR2_VAL 0x0001FFFF
#define CFG_GPCR0_VAL 0x00000000
#define CFG_GPCR1_VAL 0x00000000
#define CFG_GPCR2_VAL 0x00000000
#define CFG_GPDR0_VAL 0x0060A800
#define CFG_GPDR1_VAL 0x00FF0382
#define CFG_GPDR2_VAL 0x0001C000
#define CFG_GAFR0_L_VAL 0x98400000
#define CFG_GAFR0_U_VAL 0x00002950
#define CFG_GAFR1_L_VAL 0x000A9558
#define CFG_GAFR1_U_VAL 0x0005AAAA
#define CFG_GAFR2_L_VAL 0xA0000000
#define CFG_GAFR2_U_VAL 0x00000002
#define CFG_PSSR_VAL 0x20
/*
* Memory settings
*/
#define CFG_MSC0_VAL 0x23F223F2
#define CFG_MSC1_VAL 0x3FF1A441
#define CFG_MSC2_VAL 0x7FF17FF1
#define CFG_MDCNFG_VAL 0x00001AC9
#define CFG_MDREFR_VAL 0x000BC018
#define CFG_MDREFR_VAL_100 0x00018018
#define CFG_MDMRS_VAL 0x00000000
/*
* PCMCIA and CF Interfaces
*/
#define CFG_MECR_VAL 0x00000000
#define CFG_MCMEM0_VAL 0x00010504
#define CFG_MCMEM1_VAL 0x00010504
#define CFG_MCATT0_VAL 0x00010504
#define CFG_MCATT1_VAL 0x00010504
#define CFG_MCIO0_VAL 0x00004715
#define CFG_MCIO1_VAL 0x00004715
#define _LED 0x08000010
#define LED_BLANK (0x08000040)
/*
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
/* FIXME */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
/*
* FPGA Offsets
*/
#define WHOAMI_OFFSET 0x00
#define HEXLED_OFFSET 0x10
#define BLANKLED_OFFSET 0x40
#define DISCRETELED_OFFSET 0x40
#define CNFG_SWITCHES_OFFSET 0x50
#define USER_SWITCHES_OFFSET 0x60
#define MISC_WR_OFFSET 0x80
#define MISC_RD_OFFSET 0x90
#define INT_MASK_OFFSET 0xC0
#define INT_CLEAR_OFFSET 0xD0
#define GP_OFFSET 0x100
#endif /* __CONFIG_H */