| Intel Interrupt Router Device Binding |
| ===================================== |
| |
| The device tree node which describes the operation of the Intel Interrupt Router |
| device is as follows: |
| |
| Required properties : |
| - reg : Specifies the interrupt router's PCI configuration space address as |
| defined by the Open Firmware spec. |
| - compatible = "intel,irq-router" |
| - intel,pirq-config : Specifies the IRQ routing register programming mechanism. |
| Valid values are: |
| "pci": IRQ routing is controlled by PCI configuration registers |
| "ibase": IRQ routing is in the memory-mapped IBASE register block |
| - intel,ibase-offset : IBASE register offset in the interrupt router's PCI |
| configuration space, required only if intel,pirq-config = "ibase". |
| - intel,pirq-link : Specifies the PIRQ link information with two cells. The |
| first cell is the register offset that controls the first PIRQ link routing. |
| The second cell is the total number of PIRQ links the router supports. |
| - intel,pirq-mask : Specifies the IRQ mask reprenting the 16 IRQs in 8259 PIC. |
| Bit N is 1 means IRQ N is available to be routed. |
| - intel,pirq-routing : Specifies all PCI devices' IRQ routing information, |
| encoded as 3 cells a group for a device. The first cell is the device's PCI |
| bus number, device number and function number encoding with PCI_BDF() macro. |
| The second cell is the PCI interrupt pin used by this device. The last cell |
| is which PIRQ line the PCI interrupt pin is routed to. |
| |
| |
| Example |
| ------- |
| |
| #include <dt-bindings/interrupt-router/intel-irq.h> |
| |
| irq-router@1f,0 { |
| reg = <0x0000f800 0 0 0 0>; |
| compatible = "intel,irq-router"; |
| intel,pirq-config = "pci"; |
| intel,pirq-link = <0x60 8>; |
| intel,pirq-mask = <0xdef8>; |
| intel,pirq-routing = < |
| PCI_BDF(0, 2, 0) INTA PIRQA |
| PCI_BDF(0, 3, 0) INTA PIRQB |
| PCI_BDF(0, 8, 0) INTA PIRQC |
| PCI_BDF(0, 8, 1) INTB PIRQD |
| PCI_BDF(1, 6, 0) INTA PIRQE |
| PCI_BDF(1, 6, 1) INTB PIRQF |
| PCI_BDF(1, 6, 2) INTC PIRQG |
| PCI_BDF(1, 6, 3) INTD PIRQH |
| >; |
| }; |