board/lwmon5/lwmon5.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <command.h>
 #include <ppc440.h>
 #include <asm/processor.h>
 #include <asm/gpio.h>
 #include <asm/io.h>

 DECLARE_GLOBAL_DATA_PTR;

 extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

 ulong flash_get_size(ulong base, int banknum);
 int misc_init_r_kbd(void);

 int board_early_init_f(void)
 {
 	u32 sdr0_pfc1, sdr0_pfc2;
 	u32 reg;

 	/* PLB Write pipelining disabled. Denali Core workaround */
 	mtdcr(PLB0_ACR, 0xDE000000);
 	mtdcr(PLB1_ACR, 0xDE000000);

 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 *-------------------------------------------------------------------*/
 	mtdcr(UIC0SR, 0xffffffff);  /* clear all. if write with 1 then the status is cleared  */
 	mtdcr(UIC0ER, 0x00000000);  /* disable all */
 	mtdcr(UIC0CR, 0x00000000);  /* we have not critical interrupts at the moment */
 	mtdcr(UIC0PR, 0xFFBFF1EF);  /* Adjustment of the polarity */
 	mtdcr(UIC0TR, 0x00000900);  /* per ref-board manual */
 	mtdcr(UIC0VR, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
 	mtdcr(UIC0SR, 0xffffffff);  /* clear all */

 	mtdcr(UIC1SR, 0xffffffff);  /* clear all */
 	mtdcr(UIC1ER, 0x00000000);  /* disable all */
 	mtdcr(UIC1CR, 0x00000000);  /* all non-critical */
 	mtdcr(UIC1PR, 0xFFFFC6A5);  /* Adjustment of the polarity */
 	mtdcr(UIC1TR, 0x60000040);  /* per ref-board manual */
 	mtdcr(UIC1VR, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
 	mtdcr(UIC1SR, 0xffffffff);  /* clear all */

 	mtdcr(UIC2SR, 0xffffffff);  /* clear all */
 	mtdcr(UIC2ER, 0x00000000);  /* disable all */
 	mtdcr(UIC2CR, 0x00000000);  /* all non-critical */
 	mtdcr(UIC2PR, 0x27C00000);  /* Adjustment of the polarity */
 	mtdcr(UIC2TR, 0x3C000000);  /* per ref-board manual */
 	mtdcr(UIC2VR, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
 	mtdcr(UIC2SR, 0xffffffff);  /* clear all */

 	/* Trace Pins are disabled. SDR0_PFC0 Register */
 	mtsdr(SDR0_PFC0, 0x0);

 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
 	/* SMII via ZMII */
 	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
 		SDR0_PFC1_SELECT_CONFIG_6;
 	mfsdr(SDR0_PFC2, sdr0_pfc2);
 	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
 		SDR0_PFC2_SELECT_CONFIG_6;

 	/* enable SPI (SCP) */
 	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;

 	mtsdr(SDR0_PFC2, sdr0_pfc2);
 	mtsdr(SDR0_PFC1, sdr0_pfc1);

 	mtsdr(SDR0_PFC4, 0x80000000);

 	/* PCI arbiter disabled */
 	/* PCI Host Configuration disbaled */
 	mfsdr(SDR0_PCI0, reg);
 	reg = 0;
 	mtsdr(SDR0_PCI0, 0x00000000 | reg);

 	gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);

 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
 	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 1);

 	reg = 0; /* reuse as counter */
 	out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
 		in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
 			& ~CONFIG_SYS_DSPIC_TEST_MASK);
 	while (!gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
 		udelay(1000);
 	}
 	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 0);
 	if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
 		/* set "boot error" flag */
 		out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
 			in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
 			CONFIG_SYS_DSPIC_TEST_MASK);
 	}
 #endif

 	/*
 	 * Reset PHY's:
 	 * The PHY's need a 2nd reset pulse, since the MDIO address is latched
 	 * upon reset, and with the first reset upon powerup, the addresses are
 	 * not latched reliable, since the IRQ line is multiplexed with an
 	 * MDIO address. A 2nd reset at this time will make sure, that the
 	 * correct address is latched.
 	 */
 	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
 	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
 	udelay(1000);
 	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
 	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
 	udelay(1000);
 	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
 	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);

 	return 0;
 }

 /*---------------------------------------------------------------------------+
   | misc_init_r.
   +---------------------------------------------------------------------------*/
 int misc_init_r(void)
 {
 	u32 pbcr;
 	int size_val = 0;
 	u32 reg;
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;

 	/*
 	 * FLASH stuff...
 	 */

 	/* Re-do sizing to get full correct info */

 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;

 	mfebc(PB0CR, pbcr);
 	switch (gd->bd->bi_flashsize) {
 	case 1 << 20:
 		size_val = 0;
 		break;
 	case 2 << 20:
 		size_val = 1;
 		break;
 	case 4 << 20:
 		size_val = 2;
 		break;
 	case 8 << 20:
 		size_val = 3;
 		break;
 	case 16 << 20:
 		size_val = 4;
 		break;
 	case 32 << 20:
 		size_val = 5;
 		break;
 	case 64 << 20:
 		size_val = 6;
 		break;
 	case 128 << 20:
 		size_val = 7;
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 	mtebc(PB0CR, pbcr);

 	/*
 	 * Re-check to get correct base address
 	 */
 	flash_get_size(gd->bd->bi_flashstart, 0);

 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
 			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[1]);

 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
 			    CONFIG_ENV_ADDR_REDUND,
 			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[1]);

 	/*
 	 * USB suff...
 	 */
 	/* SDR Setting */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
 	mfsdr(SDR0_USB0, usb2d0cr);
 	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 	mfsdr(SDR0_USB2H0CR, usb2h0cr);

 	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
 	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
 	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
 	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
 	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
 	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
 	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
 	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
 	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/

 	/* An 8-bit/60MHz interface is the only possible alternative
 	   when connecting the Device to the PHY */
 	usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
 	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/

 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 	mtsdr(SDR0_USB0, usb2d0cr);
 	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 	mtsdr(SDR0_USB2H0CR, usb2h0cr);

 	/*
 	 * Clear resets
 	 */
 	udelay (1000);
 	mtsdr(SDR0_SRST1, 0x00000000);
 	udelay (1000);
 	mtsdr(SDR0_SRST0, 0x00000000);

 	printf("USB:   Host(int phy) Device(ext phy)\n");

 	/*
 	 * Clear PLB4A0_ACR[WRP]
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
 	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
 	mtdcr(PLB4_ACR, reg);

 	/*
 	 * Init matrix keyboard
 	 */
 	misc_init_r_kbd();

 	return 0;
 }

 int checkboard(void)
 {
 	char *s = getenv("serial#");

 	printf("Board: lwmon5");

 	if (s != NULL) {
 		puts(", serial# ");
 		puts(s);
 	}
 	putc('\n');

 	return (0);
 }

 void hw_watchdog_reset(void)
 {
 	int val;
 #if defined(CONFIG_WD_MAX_RATE)
 	unsigned long long ct = get_ticks();

 	/*
 	 * Don't allow watch-dog triggering more frequently than
 	 * the predefined value CONFIG_WD_MAX_RATE [ticks].
 	 */
 	if (ct >= gd->wdt_last) {
 		if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE)
 			return;
 	} else {
 		/* Time base counter had been reset */
 		if (((unsigned long long)(-1) - gd->wdt_last + ct) <
 		    CONFIG_WD_MAX_RATE)
 			return;
 	}
 	gd->wdt_last = get_ticks();
 #endif

 	/*
 	 * Toggle watchdog output
 	 */
 	val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
 	gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
 }

 int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
 		return cmd_usage(cmdtp);

 	if ((strcmp(argv[1], "on") == 0))
 		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
 	else if ((strcmp(argv[1], "off") == 0))
 		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
 	else
 		return cmd_usage(cmdtp);

 	return 0;
 }

 U_BOOT_CMD(
 	eepromwp,	2,	0,	do_eeprom_wp,
 	"eeprom write protect off/on",
 	"<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
 );

 #if defined(CONFIG_VIDEO)
 #include <video_fb.h>
 #include <mb862xx.h>

 extern GraphicDevice mb862xx;

 static const gdc_regs init_regs [] =
 {
 	{0x0100, 0x00000f00},
 	{0x0020, 0x801401df},
 	{0x0024, 0x00000000},
 	{0x0028, 0x00000000},
 	{0x002c, 0x00000000},
 	{0x0110, 0x00000000},
 	{0x0114, 0x00000000},
 	{0x0118, 0x01df0280},
 	{0x0004, 0x031f0000},
 	{0x0008, 0x027f027f},
 	{0x000c, 0x015f028f},
 	{0x0010, 0x020c0000},
 	{0x0014, 0x01df01ea},
 	{0x0018, 0x00000000},
 	{0x001c, 0x01e00280},
 	{0x0100, 0x80010f00},
 	{0x0, 0x0}
 };

 const gdc_regs *board_get_regs (void)
 {
 	return init_regs;
 }

 /* Returns Lime base address */
 unsigned int board_video_init (void)
 {
 	/*
 	 * Reset Lime controller
 	 */
 	gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
 	udelay(500);
 	gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);

 	mb862xx.winSizeX = 640;
 	mb862xx.winSizeY = 480;
 	mb862xx.gdfBytesPP = 2;
 	mb862xx.gdfIndex = GDF_15BIT_555RGB;

 	return CONFIG_SYS_LIME_BASE_0;
 }

 #define DEFAULT_BRIGHTNESS 0x64

 static void board_backlight_brightness(int brightness)
 {
 	if (brightness > 0) {
 		/* pwm duty, lamp on */
 		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
 		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
 	} else {
 		/* lamp off */
 		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
 		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
 	}
 }

 void board_backlight_switch (int flag)
 {
 	char * param;
 	int rc;

 	if (flag) {
 		param = getenv("brightness");
 		rc = param ? simple_strtol(param, NULL, 10) : -1;
 		if (rc < 0)
 			rc = DEFAULT_BRIGHTNESS;
 	} else {
 		rc = 0;
 	}
 	board_backlight_brightness(rc);
 }

 #if defined(CONFIG_CONSOLE_EXTRA_INFO)
 /*
  * Return text to be printed besides the logo.
  */
 void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1) {
 		strcpy (info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
 	} else {
 		info [0] = '\0';
 	}
 }
 #endif
 #endif /* CONFIG_VIDEO */

 void board_reset(void)
 {
 	gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
 }
	/*
	* (C) Copyright 2007
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <command.h>
	#include <ppc440.h>
	#include <asm/processor.h>
	#include <asm/gpio.h>
	#include <asm/io.h>

	DECLARE_GLOBAL_DATA_PTR;

	extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */

	ulong flash_get_size(ulong base, int banknum);
	int misc_init_r_kbd(void);

	int board_early_init_f(void)
	{
	u32 sdr0_pfc1, sdr0_pfc2;
	u32 reg;

	/* PLB Write pipelining disabled. Denali Core workaround */
	mtdcr(PLB0_ACR, 0xDE000000);
	mtdcr(PLB1_ACR, 0xDE000000);

	/*--------------------------------------------------------------------
	* Setup the interrupt controller polarities, triggers, etc.
	-------------------------------------------------------------------/
	mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
	mtdcr(UIC0ER, 0x00000000); /* disable all */
	mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */
	mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */
	mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */
	mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
	mtdcr(UIC0SR, 0xffffffff); /* clear all */

	mtdcr(UIC1SR, 0xffffffff); /* clear all */
	mtdcr(UIC1ER, 0x00000000); /* disable all */
	mtdcr(UIC1CR, 0x00000000); /* all non-critical */
	mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */
	mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */
	mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
	mtdcr(UIC1SR, 0xffffffff); /* clear all */

	mtdcr(UIC2SR, 0xffffffff); /* clear all */
	mtdcr(UIC2ER, 0x00000000); /* disable all */
	mtdcr(UIC2CR, 0x00000000); /* all non-critical */
	mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */
	mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */
	mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
	mtdcr(UIC2SR, 0xffffffff); /* clear all */

	/* Trace Pins are disabled. SDR0_PFC0 Register */
	mtsdr(SDR0_PFC0, 0x0);

	/* select Ethernet pins */
	mfsdr(SDR0_PFC1, sdr0_pfc1);
	/* SMII via ZMII */
	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) \|
	SDR0_PFC1_SELECT_CONFIG_6;
	mfsdr(SDR0_PFC2, sdr0_pfc2);
	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) \|
	SDR0_PFC2_SELECT_CONFIG_6;

	/* enable SPI (SCP) */
	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) \| SDR0_PFC1_SIS_SCP_SEL;

	mtsdr(SDR0_PFC2, sdr0_pfc2);
	mtsdr(SDR0_PFC1, sdr0_pfc1);

	mtsdr(SDR0_PFC4, 0x80000000);

	/* PCI arbiter disabled */
	/* PCI Host Configuration disbaled */
	mfsdr(SDR0_PCI0, reg);
	reg = 0;
	mtsdr(SDR0_PCI0, 0x00000000 \| reg);

	gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);

	#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 1);

	reg = 0; /* reuse as counter */
	out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
	in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
	& ~CONFIG_SYS_DSPIC_TEST_MASK);
	while (!gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
	udelay(1000);
	}
	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 0);
	if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
	/* set "boot error" flag */
	out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
	in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) \|
	CONFIG_SYS_DSPIC_TEST_MASK);
	}
	#endif

	/*
	* Reset PHY's:
	* The PHY's need a 2nd reset pulse, since the MDIO address is latched
	* upon reset, and with the first reset upon powerup, the addresses are
	* not latched reliable, since the IRQ line is multiplexed with an
	* MDIO address. A 2nd reset at this time will make sure, that the
	* correct address is latched.
	*/
	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
	udelay(1000);
	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
	udelay(1000);
	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);

	return 0;
	}

	/*---------------------------------------------------------------------------+
	\| misc_init_r.
	+---------------------------------------------------------------------------*/
	int misc_init_r(void)
	{
	u32 pbcr;
	int size_val = 0;
	u32 reg;
	unsigned long usb2d0cr = 0;
	unsigned long usb2phy0cr, usb2h0cr = 0;
	unsigned long sdr0_pfc1;

	/*
	* FLASH stuff...
	*/

	/* Re-do sizing to get full correct info */

	/* adjust flash start and offset */
	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
	gd->bd->bi_flashoffset = 0;

	mfebc(PB0CR, pbcr);
	switch (gd->bd->bi_flashsize) {
	case 1 << 20:
	size_val = 0;
	break;
	case 2 << 20:
	size_val = 1;
	break;
	case 4 << 20:
	size_val = 2;
	break;
	case 8 << 20:
	size_val = 3;
	break;
	case 16 << 20:
	size_val = 4;
	break;
	case 32 << 20:
	size_val = 5;
	break;
	case 64 << 20:
	size_val = 6;
	break;
	case 128 << 20:
	size_val = 7;
	break;
	}
	pbcr = (pbcr & 0x0001ffff) \| gd->bd->bi_flashstart \| (size_val << 17);
	mtebc(PB0CR, pbcr);

	/*
	* Re-check to get correct base address
	*/
	flash_get_size(gd->bd->bi_flashstart, 0);

	/* Monitor protection ON by default */
	(void)flash_protect(FLAG_PROTECT_SET,
	-CONFIG_SYS_MONITOR_LEN,
	0xffffffff,
	&flash_info[1]);

	/* Env protection ON by default */
	(void)flash_protect(FLAG_PROTECT_SET,
	CONFIG_ENV_ADDR_REDUND,
	CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
	&flash_info[1]);

	/*
	* USB suff...
	*/
	/* SDR Setting */
	mfsdr(SDR0_PFC1, sdr0_pfc1);
	mfsdr(SDR0_USB0, usb2d0cr);
	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
	mfsdr(SDR0_USB2H0CR, usb2h0cr);

	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
	usb2phy0cr = usb2phy0cr \| SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /0/
	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
	usb2phy0cr = usb2phy0cr \| SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /1/
	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
	usb2phy0cr = usb2phy0cr \| SDR0_USB2PHY0CR_DVBUS_PURDIS; /0/
	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
	usb2phy0cr = usb2phy0cr \| SDR0_USB2PHY0CR_DWNSTR_HOST; /1/
	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
	usb2phy0cr = usb2phy0cr \| SDR0_USB2PHY0CR_UTMICN_HOST; /1/

	/* An 8-bit/60MHz interface is the only possible alternative
	when connecting the Device to the PHY */
	usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
	usb2h0cr = usb2h0cr \| SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /1/

	mtsdr(SDR0_PFC1, sdr0_pfc1);
	mtsdr(SDR0_USB0, usb2d0cr);
	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
	mtsdr(SDR0_USB2H0CR, usb2h0cr);

	/*
	* Clear resets
	*/
	udelay (1000);
	mtsdr(SDR0_SRST1, 0x00000000);
	udelay (1000);
	mtsdr(SDR0_SRST0, 0x00000000);

	printf("USB: Host(int phy) Device(ext phy)\n");

	/*
	* Clear PLB4A0_ACR[WRP]
	* This fix will make the MAL burst disabling patch for the Linux
	* EMAC driver obsolete.
	*/
	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
	mtdcr(PLB4_ACR, reg);

	/*
	* Init matrix keyboard
	*/
	misc_init_r_kbd();

	return 0;
	}

	int checkboard(void)
	{
	char *s = getenv("serial#");

	printf("Board: lwmon5");

	if (s != NULL) {
	puts(", serial# ");
	puts(s);
	}
	putc('\n');

	return (0);
	}

	void hw_watchdog_reset(void)
	{
	int val;
	#if defined(CONFIG_WD_MAX_RATE)
	unsigned long long ct = get_ticks();

	/*
	* Don't allow watch-dog triggering more frequently than
	* the predefined value CONFIG_WD_MAX_RATE [ticks].
	*/
	if (ct >= gd->wdt_last) {
	if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE)
	return;
	} else {
	/* Time base counter had been reset */
	if (((unsigned long long)(-1) - gd->wdt_last + ct) <
	CONFIG_WD_MAX_RATE)
	return;
	}
	gd->wdt_last = get_ticks();
	#endif

	/*
	* Toggle watchdog output
	*/
	val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
	gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
	}

	int do_eeprom_wp(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	if (argc < 2)
	return cmd_usage(cmdtp);

	if ((strcmp(argv[1], "on") == 0))
	gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
	else if ((strcmp(argv[1], "off") == 0))
	gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
	else
	return cmd_usage(cmdtp);

	return 0;
	}

	U_BOOT_CMD(
	eepromwp, 2, 0, do_eeprom_wp,
	"eeprom write protect off/on",
	"<on\|off> - enable (on) or disable (off) I2C EEPROM write protect"
	);

	#if defined(CONFIG_VIDEO)
	#include <video_fb.h>
	#include <mb862xx.h>

	extern GraphicDevice mb862xx;

	static const gdc_regs init_regs [] =
	{
	{0x0100, 0x00000f00},
	{0x0020, 0x801401df},
	{0x0024, 0x00000000},
	{0x0028, 0x00000000},
	{0x002c, 0x00000000},
	{0x0110, 0x00000000},
	{0x0114, 0x00000000},
	{0x0118, 0x01df0280},
	{0x0004, 0x031f0000},
	{0x0008, 0x027f027f},
	{0x000c, 0x015f028f},
	{0x0010, 0x020c0000},
	{0x0014, 0x01df01ea},
	{0x0018, 0x00000000},
	{0x001c, 0x01e00280},
	{0x0100, 0x80010f00},
	{0x0, 0x0}
	};

	const gdc_regs *board_get_regs (void)
	{
	return init_regs;
	}

	/* Returns Lime base address */
	unsigned int board_video_init (void)
	{
	/*
	* Reset Lime controller
	*/
	gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
	udelay(500);
	gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);

	mb862xx.winSizeX = 640;
	mb862xx.winSizeY = 480;
	mb862xx.gdfBytesPP = 2;
	mb862xx.gdfIndex = GDF_15BIT_555RGB;

	return CONFIG_SYS_LIME_BASE_0;
	}

	#define DEFAULT_BRIGHTNESS 0x64

	static void board_backlight_brightness(int brightness)
	{
	if (brightness > 0) {
	/* pwm duty, lamp on */
	out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
	out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
	} else {
	/* lamp off */
	out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
	out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
	}
	}

	void board_backlight_switch (int flag)
	{
	char * param;
	int rc;

	if (flag) {
	param = getenv("brightness");
	rc = param ? simple_strtol(param, NULL, 10) : -1;
	if (rc < 0)
	rc = DEFAULT_BRIGHTNESS;
	} else {
	rc = 0;
	}
	board_backlight_brightness(rc);
	}

	#if defined(CONFIG_CONSOLE_EXTRA_INFO)
	/*
	* Return text to be printed besides the logo.
	*/
	void video_get_info_str (int line_number, char *info)
	{
	if (line_number == 1) {
	strcpy (info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
	} else {
	info [0] = '\0';
	}
	}
	#endif
	#endif /* CONFIG_VIDEO */

	void board_reset(void)
	{
	gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
	}