include/configs/ZUMA.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2001
  * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * board/config.h - configuration options, board specific
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/processor.h>

 #define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */
 #define CONFIG_ETHER_PORT_MII	/* use two MII ports */
 #define CONFIG_INTEL_LXT97X	/* Intel LXT97X phy */

 #ifndef __ASSEMBLY__
 #include <galileo/core.h>
 #endif

 #include "../board/evb64260/local.h"

 #define CONFIG_EVB64260		1	/* this is an EVB64260 board	*/
 #define CONFIG_ZUMA_V2		1	/* always define this for ZUMA v2 */

 /* #define CONFIG_ZUMA_V2_OLD	1 */	/* backwards compat for old V2 board */

 #define CONFIG_BAUDRATE		38400	/* console baudrate = 38400	*/

 #define CONFIG_ECC			/* enable ECC support */

 #define CONFIG_750CX			/* we have a 750CX/CXe (override local.h) */

 /* which initialization functions to call for this board */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_PRE_INIT
 #define CFG_BOARD_ASM_INIT

 #define CFG_BOARD_NAME		"Zuma APv2"

 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2	"> "

 /*
  * The following defines let you select what serial you want to use
  * for your console driver.
  *
  * what to do:
  * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
  * cable onto the second DUART channel, change the CFG_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
  * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
  */
 #define CONFIG_MPSC

 #define CONFIG_MPSC_PORT	0

 #define CONFIG_NET_MULTI        /* attempt all available adapters */

 /* define this if you want to enable GT MAC filtering */
 #define CONFIG_GT_USE_MAC_HASH_TABLE

 #if 1
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 #define CONFIG_ZERO_BOOTDELAY_CHECK

 #undef	CONFIG_BOOTARGS

 #define CONFIG_BOOTCOMMAND							\
 	"tftpboot && "								\
 	"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
 	"ip=$ipaddr:$serverip:$gatewayip:"				\
 	"$netmask:$hostname:eth0:none panic=5 && bootm"

 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
 #define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/

 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC			/* undef to disable		*/

 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_BOOTFILESIZE)

 #define CONFIG_MII		/* enable MII commands */

 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
 				 CFG_CMD_ASKENV | \
 				 CFG_CMD_BSP	| \
 				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_MII	| \
 				 CFG_CMD_DATE)

 /* Flash banks JFFS2 should use */
 #define CFG_JFFS2_FIRST_BANK	1
 #define CFG_JFFS2_NUM_BANKS	2

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x00300000	/* default load address */

 #define CFG_HZ			1000		/* decr freq: 1ms ticks */

 #define CFG_BUS_HZ		133000000	/* 133 MHz		*/

 #define CFG_BUS_CLK		CFG_BUS_HZ

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
 #define CFG_INIT_RAM_ADDR	0x40000000
 #define CFG_INIT_RAM_END	0x1000
 #define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_RAM_LOCK


 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xfff00000
 #define CFG_RESET_ADDRESS	0xfff00100
 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */

 /* areas to map different things with the GT in physical space */
 #define CFG_DRAM_BANKS		4
 #define CFG_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */

 /* What to put in the bats. */
 #define CFG_MISC_REGION_BASE	0xf0000000

 /* Peripheral Device section */
 #define CFG_GT_REGS		0xf8000000	/* later mapped GT_REGS */
 #define CFG_DEV_BASE		0xf0000000
 #define CFG_DEV0_SIZE		_64M /* zuma flash @ 0xf000.0000*/
 #define CFG_DEV1_SIZE		 _8M /* zuma IDE   @ 0xf400.0000 */
 #define CFG_DEV2_SIZE		 _8M /* unused */
 #define CFG_DEV3_SIZE		 _8M /* unused */

 #define CFG_DEV0_PAR		0xc498243c
 	/*     c    4     9     8     2	    4     3     c */
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */
 	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
 	/* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
 	/*  3| 0|.... ..| 1| 4 |  0 |  4 |   8 |   7 | 4  */

 #define CFG_DEV1_PAR		0xc01b6ac5
 	/*     c    0     1     b     6	    a     c     5 */
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */
 	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
 	/* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */
 	/*  3| 0|.... ..| 1| 5 |  5 |  5 |   5 |   8 | 5  */


 #define CFG_8BIT_BOOT_PAR	0xc00b5e7c

 #define CFG_MPP_CONTROL_0	0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
 #define CFG_MPP_CONTROL_1	0x00000000 /* GPP[15:12] : GPP[11:8] */
 #define CFG_MPP_CONTROL_2	0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
 #define CFG_MPP_CONTROL_3	0x00000000 /* GPP[31:28] (int[3:0]) */
 					   /* GPP[27:24] (27 is int4, rest are GPP) */

 #define CFG_SERIAL_PORT_MUX	0x00001101 /* 11=MPSC1/MPSC0 01=ETH,  0=only MII */
 #define CFG_GPP_LEVEL_CONTROL	0xf8000000 /* interrupt inputs: GPP[31:27] */

 #define CFG_SDRAM_CONFIG	0xe4e18200	/* 0x448 */
 				/* idmas use buffer 1,1
 				   comm use buffer 1
 				   pci use buffer 0,0 (pci1->0 pci0->0)
 				   cpu use buffer 1 (R*18)
 				   normal load (see also ifdef HVL)
 				   standard SDRAM (see also ifdef REG)
 				   non staggered refresh */
 				/* 31:26  25 23	 20 19 18 16 */
 				/* 111001 00 111 0  0  00 1 */

 				/* refresh count=0x200
 				   phy interleave disable (by default,
 				   set later by dram config..)
 				   virt interleave enable */
 				/* 15 14 13:0 */
 				/* 1  0	 0x200 */

 #define CFG_DEV0_SPACE		CFG_DEV_BASE
 #define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)
 #define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)
 #define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)

 /*-----------------------------------------------------------------------
  * PCI stuff
  */

 #define PCI_HOST_ADAPTER	0	/* configure ar pci adapter	*/
 #define PCI_HOST_FORCE		1	/* configure as pci host	*/
 #define PCI_HOST_AUTO		2	/* detected via arbiter enable	*/

 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/

 /* PCI MEMORY MAP section */
 #define CFG_PCI0_MEM_BASE	0x80000000
 #define CFG_PCI0_MEM_SIZE	_128M
 #define CFG_PCI1_MEM_BASE	0x88000000
 #define CFG_PCI1_MEM_SIZE	_128M

 #define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
 #define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)

 /* PCI I/O MAP section */
 #define CFG_PCI0_IO_BASE	0xfa000000
 #define CFG_PCI0_IO_SIZE	_16M
 #define CFG_PCI1_IO_BASE	0xfb000000
 #define CFG_PCI1_IO_SIZE	_16M

 #define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
 #define CFG_PCI0_IO_SPACE_PCI	0x00000000
 #define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
 #define CFG_PCI1_IO_SPACE_PCI	0x00000000


 /*----------------------------------------------------------------------
  * Initial BAT mappings
  */

 /* NOTES:
  * 1) GUARDED and WRITE_THRU not allowed in IBATS
  * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
  */

 /* SDRAM */
 #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CFG_DBAT0U CFG_IBAT0U

 /* init ram */
 #define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
 #define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 #define CFG_DBAT1L  CFG_IBAT1L
 #define CFG_DBAT1U  CFG_IBAT1U

 /* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
 #define CFG_IBAT2L BATL_NO_ACCESS
 #define CFG_IBAT2U CFG_DBAT2U
 #define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 #define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)

 /* GT regs, bootrom, all the devices, PCI I/O */
 #define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
 #define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
 #define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 #define CFG_DBAT3U CFG_IBAT3U

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */


 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks	*/
 #define CFG_MAX_FLASH_SECT	130	/* max number of sectors on one chip */

 #define CFG_EXTRA_FLASH_DEVICE	DEVICE0 /* extra flash at device 0 */
 #define CFG_EXTRA_FLASH_WIDTH	2	/* 16 bit */

 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 #define CFG_FLASH_CFI		1

 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size */
 #define CFG_ENV_ADDR		(0xfff80000 - CFG_ENV_SECT_SIZE)

 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif

 /*-----------------------------------------------------------------------
  * L2CR setup -- make sure this is right for your board!
  * look in include/74xx_7xx.h for the defines used here
  */

 #define CFG_L2

 #ifdef CONFIG_750CX
 #define L2_INIT		0
 #else
 #define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #endif

 #define L2_ENABLE	(L2_INIT | L2CR_L2E)

 /*------------------------------------------------------------------------
  * Real time clock
  */
 #define CONFIG_RTC_DS1302


 /*------------------------------------------------------------------------
  * Galileo I2C driver
  */
 #define CONFIG_GT_I2C

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2001
	* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/processor.h>

	#define CFG_GT_6426x GT_64260 /* with a 64260 system controller */
	#define CONFIG_ETHER_PORT_MII /* use two MII ports */
	#define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */

	#ifndef __ASSEMBLY__
	#include <galileo/core.h>
	#endif

	#include "../board/evb64260/local.h"

	#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
	#define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */

	/* #define CONFIG_ZUMA_V2_OLD 1 / / backwards compat for old V2 board */

	#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */

	#define CONFIG_ECC /* enable ECC support */

	#define CONFIG_750CX /* we have a 750CX/CXe (override local.h) */

	/* which initialization functions to call for this board */
	#define CONFIG_MISC_INIT_R
	#define CONFIG_BOARD_PRE_INIT
	#define CFG_BOARD_ASM_INIT

	#define CFG_BOARD_NAME "Zuma APv2"

	#define CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "

	/*
	* The following defines let you select what serial you want to use
	* for your console driver.
	*
	* what to do:
	* to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
	* cable onto the second DUART channel, change the CFG_DUART port from 1
	* to 0 below.
	*
	* to use the MPSC, #define CONFIG_MPSC. If you have wired up another
	* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
	*/
	#define CONFIG_MPSC

	#define CONFIG_MPSC_PORT 0

	#define CONFIG_NET_MULTI /* attempt all available adapters */

	/* define this if you want to enable GT MAC filtering */
	#define CONFIG_GT_USE_MAC_HASH_TABLE

	#if 1
	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	#else
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#endif
	#define CONFIG_ZERO_BOOTDELAY_CHECK

	#undef CONFIG_BOOTARGS

	#define CONFIG_BOOTCOMMAND \
	"tftpboot && " \
	"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
	"ip=$ipaddr:$serverip:$gatewayip:" \
	"$netmask:$hostname:eth0:none panic=5 && bootm"

	#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
	#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */

	#undef CONFIG_WATCHDOG /* watchdog disabled */
	#undef CONFIG_ALTIVEC /* undef to disable */

	#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT \| \
	CONFIG_BOOTP_BOOTFILESIZE)

	#define CONFIG_MII /* enable MII commands */

	#define CONFIG_COMMANDS (CONFIG_CMD_DFL \| \
	CFG_CMD_ASKENV \| \
	CFG_CMD_BSP \| \
	CFG_CMD_JFFS2 \| \
	CFG_CMD_MII \| \
	CFG_CMD_DATE)

	/* Flash banks JFFS2 should use */
	#define CFG_JFFS2_FIRST_BANK 1
	#define CFG_JFFS2_NUM_BANKS 2

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */

	#define CFG_LOAD_ADDR 0x00300000 /* default load address */

	#define CFG_HZ 1000 /* decr freq: 1ms ticks */

	#define CFG_BUS_HZ 133000000 /* 133 MHz */

	#define CFG_BUS_CLK CFG_BUS_HZ

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	*/

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area
	*/
	#define CFG_INIT_RAM_ADDR 0x40000000
	#define CFG_INIT_RAM_END 0x1000
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_RAM_LOCK


	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CFG_SDRAM_BASE _must_ start at 0
	*/
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_FLASH_BASE 0xfff00000
	#define CFG_RESET_ADDRESS 0xfff00100
	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */

	/* areas to map different things with the GT in physical space */
	#define CFG_DRAM_BANKS 4
	#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */

	/* What to put in the bats. */
	#define CFG_MISC_REGION_BASE 0xf0000000

	/* Peripheral Device section */
	#define CFG_GT_REGS 0xf8000000 /* later mapped GT_REGS */
	#define CFG_DEV_BASE 0xf0000000
	#define CFG_DEV0_SIZE _64M /* zuma flash @ 0xf000.0000*/
	#define CFG_DEV1_SIZE _8M /* zuma IDE @ 0xf400.0000 */
	#define CFG_DEV2_SIZE _8M /* unused */
	#define CFG_DEV3_SIZE _8M /* unused */

	#define CFG_DEV0_PAR 0xc498243c
	/* c 4 9 8 2 4 3 c */
	/* 33 22\|2222\|22 22\|111 1\|11 11\|1 1 \| \| */
	/* 10 98\|7654\|32 10\|987 6\|54 32\|1 098\|7 654\|3 210 */
	/* 11\|00\|0100\|10 01\|100\|0 00\|10 0\|100 0\|011 1\|100 */
	/* 3\| 0\|.... ..\| 1\| 4 \| 0 \| 4 \| 8 \| 7 \| 4 */

	#define CFG_DEV1_PAR 0xc01b6ac5
	/* c 0 1 b 6 a c 5 */
	/* 33 22\|2222\|22 22\|111 1\|11 11\|1 1 \| \| */
	/* 10 98\|7654\|32 10\|987 6\|54 32\|1 098\|7 654\|3 210 */
	/* 11\|00\|0000\|00 01\|101\|1 01\|10 1\|010 1\|100 0\|101 */
	/* 3\| 0\|.... ..\| 1\| 5 \| 5 \| 5 \| 5 \| 8 \| 5 */


	#define CFG_8BIT_BOOT_PAR 0xc00b5e7c

	#define CFG_MPP_CONTROL_0 0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
	#define CFG_MPP_CONTROL_1 0x00000000 /* GPP[15:12] : GPP[11:8] */
	#define CFG_MPP_CONTROL_2 0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
	#define CFG_MPP_CONTROL_3 0x00000000 /* GPP[31:28] (int[3:0]) */
	/* GPP[27:24] (27 is int4, rest are GPP) */

	#define CFG_SERIAL_PORT_MUX 0x00001101 /* 11=MPSC1/MPSC0 01=ETH, 0=only MII */
	#define CFG_GPP_LEVEL_CONTROL 0xf8000000 /* interrupt inputs: GPP[31:27] */

	#define CFG_SDRAM_CONFIG 0xe4e18200 /* 0x448 */
	/* idmas use buffer 1,1
	comm use buffer 1
	pci use buffer 0,0 (pci1->0 pci0->0)
	cpu use buffer 1 (R*18)
	normal load (see also ifdef HVL)
	standard SDRAM (see also ifdef REG)
	non staggered refresh */
	/* 31:26 25 23 20 19 18 16 */
	/* 111001 00 111 0 0 00 1 */

	/* refresh count=0x200
	phy interleave disable (by default,
	set later by dram config..)
	virt interleave enable */
	/* 15 14 13:0 */
	/* 1 0 0x200 */

	#define CFG_DEV0_SPACE CFG_DEV_BASE
	#define CFG_DEV1_SPACE (CFG_DEV0_SPACE + CFG_DEV0_SIZE)
	#define CFG_DEV2_SPACE (CFG_DEV1_SPACE + CFG_DEV1_SIZE)
	#define CFG_DEV3_SPACE (CFG_DEV2_SPACE + CFG_DEV2_SIZE)

	/*-----------------------------------------------------------------------
	* PCI stuff
	*/

	#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
	#define PCI_HOST_FORCE 1 /* configure as pci host */
	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */

	#define CONFIG_PCI /* include pci support */
	#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
	#define CONFIG_PCI_PNP /* do pci plug-and-play */

	/* PCI MEMORY MAP section */
	#define CFG_PCI0_MEM_BASE 0x80000000
	#define CFG_PCI0_MEM_SIZE _128M
	#define CFG_PCI1_MEM_BASE 0x88000000
	#define CFG_PCI1_MEM_SIZE _128M

	#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
	#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)

	/* PCI I/O MAP section */
	#define CFG_PCI0_IO_BASE 0xfa000000
	#define CFG_PCI0_IO_SIZE _16M
	#define CFG_PCI1_IO_BASE 0xfb000000
	#define CFG_PCI1_IO_SIZE _16M

	#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
	#define CFG_PCI0_IO_SPACE_PCI 0x00000000
	#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
	#define CFG_PCI1_IO_SPACE_PCI 0x00000000


	/*----------------------------------------------------------------------
	* Initial BAT mappings
	*/

	/* NOTES:
	* 1) GUARDED and WRITE_THRU not allowed in IBATS
	* 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
	*/

	/* SDRAM */
	#define CFG_IBAT0L (CFG_SDRAM_BASE \| BATL_PP_RW \| BATL_CACHEINHIBIT)
	#define CFG_IBAT0U (CFG_SDRAM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	#define CFG_DBAT0L (CFG_SDRAM_BASE \| BATL_PP_RW \| BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	#define CFG_DBAT0U CFG_IBAT0U

	/* init ram */
	#define CFG_IBAT1L (CFG_INIT_RAM_ADDR \| BATL_PP_RW \| BATL_MEMCOHERENCE)
	#define CFG_IBAT1U (CFG_INIT_RAM_ADDR \| BATU_BL_128K \| BATU_VS \| BATU_VP)
	#define CFG_DBAT1L CFG_IBAT1L
	#define CFG_DBAT1U CFG_IBAT1U

	/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
	#define CFG_IBAT2L BATL_NO_ACCESS
	#define CFG_IBAT2U CFG_DBAT2U
	#define CFG_DBAT2L (CFG_PCI0_MEM_BASE \| BATL_CACHEINHIBIT \| BATL_PP_RW \| BATL_GUARDEDSTORAGE)
	#define CFG_DBAT2U (CFG_PCI0_MEM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)

	/* GT regs, bootrom, all the devices, PCI I/O */
	#define CFG_IBAT3L (CFG_MISC_REGION_BASE \| BATL_CACHEINHIBIT \| BATL_PP_RW)
	#define CFG_IBAT3U (CFG_MISC_REGION_BASE \| BATU_VS \| BATU_VP \| BATU_BL_256M)
	#define CFG_DBAT3L (CFG_MISC_REGION_BASE \| BATL_CACHEINHIBIT \| BATL_PP_RW \| BATL_GUARDEDSTORAGE)
	#define CFG_DBAT3U CFG_IBAT3U

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */


	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
	#define CFG_MAX_FLASH_SECT 130 /* max number of sectors on one chip */

	#define CFG_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */
	#define CFG_EXTRA_FLASH_WIDTH 2 /* 16 bit */

	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	#define CFG_FLASH_CFI 1

	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
	#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
	#define CFG_ENV_ADDR (0xfff80000 - CFG_ENV_SECT_SIZE)

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* L2CR setup -- make sure this is right for your board!
	* look in include/74xx_7xx.h for the defines used here
	*/

	#define CFG_L2

	#ifdef CONFIG_750CX
	#define L2_INIT 0
	#else
	#define L2_INIT (L2CR_L2SIZ_2M \| L2CR_L2CLK_3 \| L2CR_L2RAM_BURST \| \
	L2CR_L2OH_5 \| L2CR_L2CTL \| L2CR_L2WT)
	#endif

	#define L2_ENABLE (L2_INIT \| L2CR_L2E)

	/*------------------------------------------------------------------------
	* Real time clock
	*/
	#define CONFIG_RTC_DS1302


	/*------------------------------------------------------------------------
	* Galileo I2C driver
	*/
	#define CONFIG_GT_I2C

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#endif /* __CONFIG_H */