| /** |
| * @file IxEthMii_p.h |
| * |
| * @author Intel Corporation |
| * @date |
| * |
| * @brief MII Header file |
| * |
| * Design Notes: |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * @par |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| |
| #ifndef IxEthMii_p_H |
| #define IxEthMii_p_H |
| |
| |
| /* MII definitions - these have been verified against the LXT971 and |
| LXT972 PHYs*/ |
| |
| #define IX_ETH_MII_MAX_REG_NUM 0x20 /* max number of registers */ |
| |
| #define IX_ETH_MII_CTRL_REG 0x0 /* Control Register */ |
| #define IX_ETH_MII_STAT_REG 0x1 /* Status Register */ |
| #define IX_ETH_MII_PHY_ID1_REG 0x2 /* PHY identifier 1 Register */ |
| #define IX_ETH_MII_PHY_ID2_REG 0x3 /* PHY identifier 2 Register */ |
| #define IX_ETH_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */ |
| /* Advertisement Register */ |
| #define IX_ETH_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */ |
| /* partner ability Register */ |
| #define IX_ETH_MII_AN_EXP_REG 0x6 /* Auto-Negotiation */ |
| /* Expansion Register */ |
| #define IX_ETH_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */ |
| /* next-page transmit Register */ |
| |
| #define IX_ETH_MII_STAT2_REG 0x11 /* Status Register 2*/ |
| |
| |
| /* MII control register bit */ |
| |
| #define IX_ETH_MII_CR_COLL_TEST 0x0080 /* collision test */ |
| #define IX_ETH_MII_CR_FDX 0x0100 /* FDX =1, half duplex =0 */ |
| #define IX_ETH_MII_CR_RESTART 0x0200 /* restart auto negotiation */ |
| #define IX_ETH_MII_CR_ISOLATE 0x0400 /* isolate PHY from MII */ |
| #define IX_ETH_MII_CR_POWER_DOWN 0x0800 /* power down */ |
| #define IX_ETH_MII_CR_AUTO_EN 0x1000 /* auto-negotiation enable */ |
| #define IX_ETH_MII_CR_100 0x2000 /* 0 = 10mb, 1 = 100mb */ |
| #define IX_ETH_MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ |
| #define IX_ETH_MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ |
| #define IX_ETH_MII_CR_NORM_EN 0x0000 /* just enable the PHY */ |
| #define IX_ETH_MII_CR_DEF_0_MASK 0xca7f /* they must return zero */ |
| #define IX_ETH_MII_CR_RES_MASK 0x007f /* reserved bits, return zero */ |
| |
| /* MII Status register bit definitions */ |
| |
| #define IX_ETH_MII_SR_LINK_STATUS 0x0004 /* link Status -- 1 = link */ |
| #define IX_ETH_MII_SR_AUTO_SEL 0x0008 /* auto speed select capable */ |
| #define IX_ETH_MII_SR_REMOTE_FAULT 0x0010 /* Remote fault detect */ |
| #define IX_ETH_MII_SR_AUTO_NEG 0x0020 /* auto negotiation complete */ |
| #define IX_ETH_MII_SR_10T_HALF_DPX 0x0800 /* 10BaseT HD capable */ |
| #define IX_ETH_MII_SR_10T_FULL_DPX 0x1000 /* 10BaseT FD capable */ |
| #define IX_ETH_MII_SR_TX_HALF_DPX 0x2000 /* TX HD capable */ |
| #define IX_ETH_MII_SR_TX_FULL_DPX 0x4000 /* TX FD capable */ |
| #define IX_ETH_MII_SR_T4 0x8000 /* T4 capable */ |
| #define IX_ETH_MII_SR_ABIL_MASK 0xff80 /* abilities mask */ |
| #define IX_ETH_MII_SR_EXT_CAP 0x0001 /* extended capabilities */ |
| |
| |
| /* LXT971/2 Status 2 register bit definitions */ |
| #define IX_ETH_MII_SR2_100 0x4000 |
| #define IX_ETH_MII_SR2_TX 0x2000 |
| #define IX_ETH_MII_SR2_RX 0x1000 |
| #define IX_ETH_MII_SR2_COL 0x0800 |
| #define IX_ETH_MII_SR2_LINK 0x0400 |
| #define IX_ETH_MII_SR2_FD 0x0200 |
| #define IX_ETH_MII_SR2_AUTO 0x0100 |
| #define IX_ETH_MII_SR2_AUTO_CMPLT 0x0080 |
| #define IX_ETH_MII_SR2_POLARITY 0x0020 |
| #define IX_ETH_MII_SR2_PAUSE 0x0010 |
| #define IX_ETH_MII_SR2_ERROR 0x0008 |
| |
| /* MII Link Code word bit definitions */ |
| |
| #define IX_ETH_MII_BP_FAULT 0x2000 /* remote fault */ |
| #define IX_ETH_MII_BP_ACK 0x4000 /* acknowledge */ |
| #define IX_ETH_MII_BP_NP 0x8000 /* nexp page is supported */ |
| |
| /* MII Next Page bit definitions */ |
| |
| #define IX_ETH_MII_NP_TOGGLE 0x0800 /* toggle bit */ |
| #define IX_ETH_MII_NP_ACK2 0x1000 /* acknowledge two */ |
| #define IX_ETH_MII_NP_MSG 0x2000 /* message page */ |
| #define IX_ETH_MII_NP_ACK1 0x4000 /* acknowledge one */ |
| #define IX_ETH_MII_NP_NP 0x8000 /* nexp page will follow */ |
| |
| /* MII Expansion Register bit definitions */ |
| |
| #define IX_ETH_MII_EXP_FAULT 0x0010 /* parallel detection fault */ |
| #define IX_ETH_MII_EXP_PRTN_NP 0x0008 /* link partner next-page able */ |
| #define IX_ETH_MII_EXP_LOC_NP 0x0004 /* local PHY next-page able */ |
| #define IX_ETH_MII_EXP_PR 0x0002 /* full page received */ |
| #define IX_ETH_MII_EXP_PRT_AN 0x0001 /* link partner auto neg able */ |
| |
| /* technology ability field bit definitions */ |
| |
| #define IX_ETH_MII_TECH_10BASE_T 0x0020 /* 10Base-T */ |
| #define IX_ETH_MII_TECH_10BASE_FD 0x0040 /* 10Base-T Full Duplex */ |
| #define IX_ETH_MII_TECH_100BASE_TX 0x0080 /* 100Base-TX */ |
| #define IX_ETH_MII_TECH_100BASE_TX_FD 0x0100 /* 100Base-TX Full Duplex */ |
| |
| #define IX_ETH_MII_TECH_100BASE_T4 0x0200 /* 100Base-T4 */ |
| #define IX_ETH_MII_ADS_TECH_MASK 0x1fe0 /* technology abilities mask */ |
| #define IX_ETH_MII_TECH_MASK IX_ETH_MII_ADS_TECH_MASK |
| #define IX_ETH_MII_ADS_SEL_MASK 0x001f /* selector field mask */ |
| |
| #define IX_ETH_MII_AN_FAIL 0x10 /* auto-negotiation fail */ |
| #define IX_ETH_MII_STAT_FAIL 0x20 /* errors in the status register */ |
| #define IX_ETH_MII_PHY_NO_ABLE 0x40 /* the PHY lacks some abilities */ |
| |
| /* Definitions for MII access routines*/ |
| |
| #define IX_ETH_MII_GO BIT(31) |
| #define IX_ETH_MII_WRITE BIT(26) |
| #define IX_ETH_MII_TIMEOUT_10TH_SECS (5) |
| #define IX_ETH_MII_10TH_SEC_IN_MILLIS (100) |
| #define IX_ETH_MII_READ_FAIL BIT(31) |
| |
| /* When we reset the PHY we delay for 2 seconds to allow the reset to |
| complete*/ |
| #define IX_ETH_MII_RESET_DELAY_MS (2000) |
| #define IX_ETH_MII_RESET_POLL_MS (50) |
| |
| #define IX_ETH_MII_REG_SHL 16 |
| #define IX_ETH_MII_ADDR_SHL 21 |
| |
| /* supported PHYs */ |
| #define IX_ETH_MII_LXT971_PHY_ID 0x001378E0 |
| #define IX_ETH_MII_LXT972_PHY_ID 0x001378E2 |
| #define IX_ETH_MII_LXT973_PHY_ID 0x00137A10 |
| #define IX_ETH_MII_LXT973A3_PHY_ID 0x00137A11 |
| #define IX_ETH_MII_KS8995_PHY_ID 0x00221450 |
| #define IX_ETH_MII_LXT9785_PHY_ID 0x001378FF |
| |
| |
| #define IX_ETH_MII_INVALID_PHY_ID 0x00000000 |
| #define IX_ETH_MII_UNKNOWN_PHY_ID 0xffffffff |
| |
| #endif /*IxEthAccMii_p_H*/ |