| /* |
| * (C) Copyright 2007 Michal Simek |
| * |
| * Michal SIMEK <monstr@monstr.eu> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * CAUTION: This file is a faked configuration !!! |
| * There is no real target for the microblaze-generic |
| * configuration. You have to replace this file with |
| * the generated file from your Xilinx design flow. |
| */ |
| |
| #define XILINX_BOARD_NAME microblaze-generic |
| |
| /* System Clock Frequency */ |
| #define XILINX_CLOCK_FREQ 100000000 |
| |
| /* Microblaze is microblaze_0 */ |
| #define XILINX_USE_MSR_INSTR 1 |
| #define XILINX_FSL_NUMBER 3 |
| |
| /* Interrupt controller is opb_intc_0 */ |
| #define XILINX_INTC_BASEADDR 0x41200000 |
| #define XILINX_INTC_NUM_INTR_INPUTS 6 |
| |
| /* Timer pheriphery is opb_timer_1 */ |
| #define XILINX_TIMER_BASEADDR 0x41c00000 |
| #define XILINX_TIMER_IRQ 0 |
| |
| /* Uart pheriphery is RS232_Uart */ |
| #define XILINX_UARTLITE_BASEADDR 0x40600000 |
| #define XILINX_UARTLITE_BAUDRATE 115200 |
| |
| /* IIC pheriphery is IIC_EEPROM */ |
| #define XILINX_IIC_0_BASEADDR 0x40800000 |
| #define XILINX_IIC_0_FREQ 100000 |
| #define XILINX_IIC_0_BIT 0 |
| |
| /* GPIO is LEDs_4Bit*/ |
| #define XILINX_GPIO_BASEADDR 0x40000000 |
| |
| /* Flash Memory is FLASH_2Mx32 */ |
| #define XILINX_FLASH_START 0x2c000000 |
| #define XILINX_FLASH_SIZE 0x00800000 |
| |
| /* Main Memory is DDR_SDRAM_64Mx32 */ |
| #define XILINX_RAM_START 0x28000000 |
| #define XILINX_RAM_SIZE 0x04000000 |
| |
| /* Sysace Controller is SysACE_CompactFlash */ |
| #define XILINX_SYSACE_BASEADDR 0x41800000 |
| #define XILINX_SYSACE_HIGHADDR 0x4180ffff |
| #define XILINX_SYSACE_MEM_WIDTH 16 |
| |
| /* Ethernet controller is Ethernet_MAC */ |
| #define XILINX_EMACLITE_BASEADDR 0x40C00000 |
| |
| /* LL_TEMAC Ethernet controller */ |
| #define XILINX_LLTEMAC_BASEADDR 0x44000000 |
| #define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR 0x42000180 |
| #define XILINX_LLTEMAC_BASEADDR1 0x44200000 |
| #define XILINX_LLTEMAC_FIFO_BASEADDR1 0x42100000 |
| |
| /* Watchdog IP is wxi_timebase_wdt_0 */ |
| #define XILINX_WATCHDOG_BASEADDR 0x50000000 |
| #define XILINX_WATCHDOG_IRQ 1 |