| /* |
| * (C) Copyright 2001-2015 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * Joe Hershberger, National Instruments |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <environment.h> |
| #include <net.h> |
| #include <miiphy.h> |
| #include <phy.h> |
| #include <asm/errno.h> |
| #include <dm/device-internal.h> |
| #include <dm/uclass-internal.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void eth_parse_enetaddr(const char *addr, uchar *enetaddr) |
| { |
| char *end; |
| int i; |
| |
| for (i = 0; i < 6; ++i) { |
| enetaddr[i] = addr ? simple_strtoul(addr, &end, 16) : 0; |
| if (addr) |
| addr = (*end) ? end + 1 : end; |
| } |
| } |
| |
| int eth_getenv_enetaddr(char *name, uchar *enetaddr) |
| { |
| eth_parse_enetaddr(getenv(name), enetaddr); |
| return is_valid_ethaddr(enetaddr); |
| } |
| |
| int eth_setenv_enetaddr(char *name, const uchar *enetaddr) |
| { |
| char buf[20]; |
| |
| sprintf(buf, "%pM", enetaddr); |
| |
| return setenv(name, buf); |
| } |
| |
| int eth_getenv_enetaddr_by_index(const char *base_name, int index, |
| uchar *enetaddr) |
| { |
| char enetvar[32]; |
| sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); |
| return eth_getenv_enetaddr(enetvar, enetaddr); |
| } |
| |
| static inline int eth_setenv_enetaddr_by_index(const char *base_name, int index, |
| uchar *enetaddr) |
| { |
| char enetvar[32]; |
| sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); |
| return eth_setenv_enetaddr(enetvar, enetaddr); |
| } |
| |
| static int eth_mac_skip(int index) |
| { |
| char enetvar[15]; |
| char *skip_state; |
| |
| sprintf(enetvar, index ? "eth%dmacskip" : "ethmacskip", index); |
| skip_state = getenv(enetvar); |
| return skip_state != NULL; |
| } |
| |
| static void eth_current_changed(void); |
| |
| /* |
| * CPU and board-specific Ethernet initializations. Aliased function |
| * signals caller to move on |
| */ |
| static int __def_eth_init(bd_t *bis) |
| { |
| return -1; |
| } |
| int cpu_eth_init(bd_t *bis) __attribute__((weak, alias("__def_eth_init"))); |
| int board_eth_init(bd_t *bis) __attribute__((weak, alias("__def_eth_init"))); |
| |
| static void eth_common_init(void) |
| { |
| bootstage_mark(BOOTSTAGE_ID_NET_ETH_START); |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) |
| miiphy_init(); |
| #endif |
| |
| #ifdef CONFIG_PHYLIB |
| phy_init(); |
| #endif |
| |
| /* |
| * If board-specific initialization exists, call it. |
| * If not, call a CPU-specific one |
| */ |
| if (board_eth_init != __def_eth_init) { |
| if (board_eth_init(gd->bd) < 0) |
| printf("Board Net Initialization Failed\n"); |
| } else if (cpu_eth_init != __def_eth_init) { |
| if (cpu_eth_init(gd->bd) < 0) |
| printf("CPU Net Initialization Failed\n"); |
| } else { |
| #ifndef CONFIG_DM_ETH |
| printf("Net Initialization Skipped\n"); |
| #endif |
| } |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| /** |
| * struct eth_device_priv - private structure for each Ethernet device |
| * |
| * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t) |
| */ |
| struct eth_device_priv { |
| enum eth_state_t state; |
| }; |
| |
| /** |
| * struct eth_uclass_priv - The structure attached to the uclass itself |
| * |
| * @current: The Ethernet device that the network functions are using |
| */ |
| struct eth_uclass_priv { |
| struct udevice *current; |
| }; |
| |
| /* eth_errno - This stores the most recent failure code from DM functions */ |
| static int eth_errno; |
| |
| static struct eth_uclass_priv *eth_get_uclass_priv(void) |
| { |
| struct uclass *uc; |
| |
| uclass_get(UCLASS_ETH, &uc); |
| assert(uc); |
| return uc->priv; |
| } |
| |
| static void eth_set_current_to_next(void) |
| { |
| struct eth_uclass_priv *uc_priv; |
| |
| uc_priv = eth_get_uclass_priv(); |
| if (uc_priv->current) |
| uclass_next_device(&uc_priv->current); |
| if (!uc_priv->current) |
| uclass_first_device(UCLASS_ETH, &uc_priv->current); |
| } |
| |
| /* |
| * Typically this will simply return the active device. |
| * In the case where the most recent active device was unset, this will attempt |
| * to return the first device. If that device doesn't exist or fails to probe, |
| * this function will return NULL. |
| */ |
| struct udevice *eth_get_dev(void) |
| { |
| struct eth_uclass_priv *uc_priv; |
| |
| uc_priv = eth_get_uclass_priv(); |
| if (!uc_priv->current) |
| eth_errno = uclass_first_device(UCLASS_ETH, |
| &uc_priv->current); |
| return uc_priv->current; |
| } |
| |
| /* |
| * Typically this will just store a device pointer. |
| * In case it was not probed, we will attempt to do so. |
| * dev may be NULL to unset the active device. |
| */ |
| static void eth_set_dev(struct udevice *dev) |
| { |
| if (dev && !device_active(dev)) |
| eth_errno = device_probe(dev); |
| eth_get_uclass_priv()->current = dev; |
| } |
| |
| /* |
| * Find the udevice that either has the name passed in as devname or has an |
| * alias named devname. |
| */ |
| struct udevice *eth_get_dev_by_name(const char *devname) |
| { |
| int seq = -1; |
| char *endp = NULL; |
| const char *startp = NULL; |
| struct udevice *it; |
| struct uclass *uc; |
| int len = strlen("eth"); |
| |
| /* Must be longer than 3 to be an alias */ |
| if (!strncmp(devname, "eth", len) && strlen(devname) > len) { |
| startp = devname + len; |
| seq = simple_strtoul(startp, &endp, 10); |
| } |
| |
| uclass_get(UCLASS_ETH, &uc); |
| uclass_foreach_dev(it, uc) { |
| /* |
| * We need the seq to be valid, so try to probe it. |
| * If the probe fails, the seq will not match since it will be |
| * -1 instead of what we are looking for. |
| * We don't care about errors from probe here. Either they won't |
| * match an alias or it will match a literal name and we'll pick |
| * up the error when we try to probe again in eth_set_dev(). |
| */ |
| device_probe(it); |
| /* |
| * Check for the name or the sequence number to match |
| */ |
| if (strcmp(it->name, devname) == 0 || |
| (endp > startp && it->seq == seq)) |
| return it; |
| } |
| |
| return NULL; |
| } |
| |
| unsigned char *eth_get_ethaddr(void) |
| { |
| struct eth_pdata *pdata; |
| |
| if (eth_get_dev()) { |
| pdata = eth_get_dev()->platdata; |
| return pdata->enetaddr; |
| } |
| |
| return NULL; |
| } |
| |
| /* Set active state without calling start on the driver */ |
| int eth_init_state_only(void) |
| { |
| struct udevice *current; |
| struct eth_device_priv *priv; |
| |
| current = eth_get_dev(); |
| if (!current || !device_active(current)) |
| return -EINVAL; |
| |
| priv = current->uclass_priv; |
| priv->state = ETH_STATE_ACTIVE; |
| |
| return 0; |
| } |
| |
| /* Set passive state without calling stop on the driver */ |
| void eth_halt_state_only(void) |
| { |
| struct udevice *current; |
| struct eth_device_priv *priv; |
| |
| current = eth_get_dev(); |
| if (!current || !device_active(current)) |
| return; |
| |
| priv = current->uclass_priv; |
| priv->state = ETH_STATE_PASSIVE; |
| } |
| |
| int eth_get_dev_index(void) |
| { |
| if (eth_get_dev()) |
| return eth_get_dev()->seq; |
| return -1; |
| } |
| |
| static int eth_write_hwaddr(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev->platdata; |
| int ret = 0; |
| |
| if (!dev || !device_active(dev)) |
| return -EINVAL; |
| |
| /* seq is valid since the device is active */ |
| if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) { |
| if (!is_valid_ethaddr(pdata->enetaddr)) { |
| printf("\nError: %s address %pM illegal value\n", |
| dev->name, pdata->enetaddr); |
| return -EINVAL; |
| } |
| |
| /* |
| * Drivers are allowed to decide not to implement this at |
| * run-time. E.g. Some devices may use it and some may not. |
| */ |
| ret = eth_get_ops(dev)->write_hwaddr(dev); |
| if (ret == -ENOSYS) |
| ret = 0; |
| if (ret) |
| printf("\nWarning: %s failed to set MAC address\n", |
| dev->name); |
| } |
| |
| return ret; |
| } |
| |
| static int on_ethaddr(const char *name, const char *value, enum env_op op, |
| int flags) |
| { |
| int index; |
| int retval; |
| struct udevice *dev; |
| |
| /* look for an index after "eth" */ |
| index = simple_strtoul(name + 3, NULL, 10); |
| |
| retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev); |
| if (!retval) { |
| struct eth_pdata *pdata = dev->platdata; |
| switch (op) { |
| case env_op_create: |
| case env_op_overwrite: |
| eth_parse_enetaddr(value, pdata->enetaddr); |
| break; |
| case env_op_delete: |
| memset(pdata->enetaddr, 0, 6); |
| } |
| } |
| |
| return 0; |
| } |
| U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr); |
| |
| int eth_init(void) |
| { |
| struct udevice *current; |
| struct udevice *old_current; |
| int ret = -ENODEV; |
| |
| current = eth_get_dev(); |
| if (!current) { |
| printf("No ethernet found.\n"); |
| return -ENODEV; |
| } |
| |
| old_current = current; |
| do { |
| debug("Trying %s\n", current->name); |
| |
| if (device_active(current)) { |
| ret = eth_get_ops(current)->start(current); |
| if (ret >= 0) { |
| struct eth_device_priv *priv = |
| current->uclass_priv; |
| |
| priv->state = ETH_STATE_ACTIVE; |
| return 0; |
| } |
| } else { |
| ret = eth_errno; |
| } |
| |
| debug("FAIL\n"); |
| |
| /* |
| * If ethrotate is enabled, this will change "current", |
| * otherwise we will drop out of this while loop immediately |
| */ |
| eth_try_another(0); |
| /* This will ensure the new "current" attempted to probe */ |
| current = eth_get_dev(); |
| } while (old_current != current); |
| |
| return ret; |
| } |
| |
| void eth_halt(void) |
| { |
| struct udevice *current; |
| struct eth_device_priv *priv; |
| |
| current = eth_get_dev(); |
| if (!current || !device_active(current)) |
| return; |
| |
| eth_get_ops(current)->stop(current); |
| priv = current->uclass_priv; |
| priv->state = ETH_STATE_PASSIVE; |
| } |
| |
| int eth_send(void *packet, int length) |
| { |
| struct udevice *current; |
| int ret; |
| |
| current = eth_get_dev(); |
| if (!current) |
| return -ENODEV; |
| |
| if (!device_active(current)) |
| return -EINVAL; |
| |
| ret = eth_get_ops(current)->send(current, packet, length); |
| if (ret < 0) { |
| /* We cannot completely return the error at present */ |
| debug("%s: send() returned error %d\n", __func__, ret); |
| } |
| return ret; |
| } |
| |
| int eth_rx(void) |
| { |
| struct udevice *current; |
| uchar *packet; |
| int flags; |
| int ret; |
| int i; |
| |
| current = eth_get_dev(); |
| if (!current) |
| return -ENODEV; |
| |
| if (!device_active(current)) |
| return -EINVAL; |
| |
| /* Process up to 32 packets at one time */ |
| flags = ETH_RECV_CHECK_DEVICE; |
| for (i = 0; i < 32; i++) { |
| ret = eth_get_ops(current)->recv(current, flags, &packet); |
| flags = 0; |
| if (ret > 0) |
| net_process_received_packet(packet, ret); |
| if (ret >= 0 && eth_get_ops(current)->free_pkt) |
| eth_get_ops(current)->free_pkt(current, packet, ret); |
| if (ret <= 0) |
| break; |
| } |
| if (ret == -EAGAIN) |
| ret = 0; |
| if (ret < 0) { |
| /* We cannot completely return the error at present */ |
| debug("%s: recv() returned error %d\n", __func__, ret); |
| } |
| return ret; |
| } |
| |
| int eth_initialize(void) |
| { |
| int num_devices = 0; |
| struct udevice *dev; |
| |
| eth_common_init(); |
| |
| /* |
| * Devices need to write the hwaddr even if not started so that Linux |
| * will have access to the hwaddr that u-boot stored for the device. |
| * This is accomplished by attempting to probe each device and calling |
| * their write_hwaddr() operation. |
| */ |
| uclass_first_device(UCLASS_ETH, &dev); |
| if (!dev) { |
| printf("No ethernet found.\n"); |
| bootstage_error(BOOTSTAGE_ID_NET_ETH_START); |
| } else { |
| char *ethprime = getenv("ethprime"); |
| struct udevice *prime_dev = NULL; |
| |
| if (ethprime) |
| prime_dev = eth_get_dev_by_name(ethprime); |
| if (prime_dev) { |
| eth_set_dev(prime_dev); |
| eth_current_changed(); |
| } else { |
| eth_set_dev(NULL); |
| } |
| |
| bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT); |
| do { |
| if (num_devices) |
| printf(", "); |
| |
| printf("eth%d: %s", dev->seq, dev->name); |
| |
| if (ethprime && dev == prime_dev) |
| printf(" [PRIME]"); |
| |
| eth_write_hwaddr(dev); |
| |
| uclass_next_device(&dev); |
| num_devices++; |
| } while (dev); |
| |
| putc('\n'); |
| } |
| |
| return num_devices; |
| } |
| |
| static int eth_post_bind(struct udevice *dev) |
| { |
| if (strchr(dev->name, ' ')) { |
| printf("\nError: eth device name \"%s\" has a space!\n", |
| dev->name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int eth_pre_unbind(struct udevice *dev) |
| { |
| /* Don't hang onto a pointer that is going away */ |
| if (dev == eth_get_uclass_priv()->current) |
| eth_set_dev(NULL); |
| |
| return 0; |
| } |
| |
| static int eth_post_probe(struct udevice *dev) |
| { |
| struct eth_device_priv *priv = dev->uclass_priv; |
| struct eth_pdata *pdata = dev->platdata; |
| unsigned char env_enetaddr[6]; |
| |
| priv->state = ETH_STATE_INIT; |
| |
| /* Check if the device has a MAC address in ROM */ |
| if (eth_get_ops(dev)->read_rom_hwaddr) |
| eth_get_ops(dev)->read_rom_hwaddr(dev); |
| |
| eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr); |
| if (!is_zero_ethaddr(env_enetaddr)) { |
| if (!is_zero_ethaddr(pdata->enetaddr) && |
| memcmp(pdata->enetaddr, env_enetaddr, 6)) { |
| printf("\nWarning: %s MAC addresses don't match:\n", |
| dev->name); |
| printf("Address in SROM is %pM\n", |
| pdata->enetaddr); |
| printf("Address in environment is %pM\n", |
| env_enetaddr); |
| } |
| |
| /* Override the ROM MAC address */ |
| memcpy(pdata->enetaddr, env_enetaddr, 6); |
| } else if (is_valid_ethaddr(pdata->enetaddr)) { |
| eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr); |
| printf("\nWarning: %s using MAC address from ROM\n", |
| dev->name); |
| } else if (is_zero_ethaddr(pdata->enetaddr)) { |
| #ifdef CONFIG_NET_RANDOM_ETHADDR |
| net_random_ethaddr(pdata->enetaddr); |
| printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", |
| dev->name, dev->seq, pdata->enetaddr); |
| #else |
| printf("\nError: %s address not set.\n", |
| dev->name); |
| return -EINVAL; |
| #endif |
| } |
| |
| return 0; |
| } |
| |
| static int eth_pre_remove(struct udevice *dev) |
| { |
| eth_get_ops(dev)->stop(dev); |
| |
| return 0; |
| } |
| |
| UCLASS_DRIVER(eth) = { |
| .name = "eth", |
| .id = UCLASS_ETH, |
| .post_bind = eth_post_bind, |
| .pre_unbind = eth_pre_unbind, |
| .post_probe = eth_post_probe, |
| .pre_remove = eth_pre_remove, |
| .priv_auto_alloc_size = sizeof(struct eth_uclass_priv), |
| .per_device_auto_alloc_size = sizeof(struct eth_device_priv), |
| .flags = DM_UC_FLAG_SEQ_ALIAS, |
| }; |
| #endif |
| |
| #ifndef CONFIG_DM_ETH |
| |
| #ifdef CONFIG_API |
| static struct { |
| uchar data[PKTSIZE]; |
| int length; |
| } eth_rcv_bufs[PKTBUFSRX]; |
| |
| static unsigned int eth_rcv_current, eth_rcv_last; |
| #endif |
| |
| static struct eth_device *eth_devices; |
| struct eth_device *eth_current; |
| |
| static void eth_set_current_to_next(void) |
| { |
| eth_current = eth_current->next; |
| } |
| |
| static void eth_set_dev(struct eth_device *dev) |
| { |
| eth_current = dev; |
| } |
| |
| struct eth_device *eth_get_dev_by_name(const char *devname) |
| { |
| struct eth_device *dev, *target_dev; |
| |
| BUG_ON(devname == NULL); |
| |
| if (!eth_devices) |
| return NULL; |
| |
| dev = eth_devices; |
| target_dev = NULL; |
| do { |
| if (strcmp(devname, dev->name) == 0) { |
| target_dev = dev; |
| break; |
| } |
| dev = dev->next; |
| } while (dev != eth_devices); |
| |
| return target_dev; |
| } |
| |
| struct eth_device *eth_get_dev_by_index(int index) |
| { |
| struct eth_device *dev, *target_dev; |
| |
| if (!eth_devices) |
| return NULL; |
| |
| dev = eth_devices; |
| target_dev = NULL; |
| do { |
| if (dev->index == index) { |
| target_dev = dev; |
| break; |
| } |
| dev = dev->next; |
| } while (dev != eth_devices); |
| |
| return target_dev; |
| } |
| |
| int eth_get_dev_index(void) |
| { |
| if (!eth_current) |
| return -1; |
| |
| return eth_current->index; |
| } |
| |
| static int on_ethaddr(const char *name, const char *value, enum env_op op, |
| int flags) |
| { |
| int index; |
| struct eth_device *dev; |
| |
| if (!eth_devices) |
| return 0; |
| |
| /* look for an index after "eth" */ |
| index = simple_strtoul(name + 3, NULL, 10); |
| |
| dev = eth_devices; |
| do { |
| if (dev->index == index) { |
| switch (op) { |
| case env_op_create: |
| case env_op_overwrite: |
| eth_parse_enetaddr(value, dev->enetaddr); |
| break; |
| case env_op_delete: |
| memset(dev->enetaddr, 0, 6); |
| } |
| } |
| } while (dev != eth_devices); |
| |
| return 0; |
| } |
| U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr); |
| |
| int eth_write_hwaddr(struct eth_device *dev, const char *base_name, |
| int eth_number) |
| { |
| unsigned char env_enetaddr[6]; |
| int ret = 0; |
| |
| eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr); |
| |
| if (!is_zero_ethaddr(env_enetaddr)) { |
| if (!is_zero_ethaddr(dev->enetaddr) && |
| memcmp(dev->enetaddr, env_enetaddr, 6)) { |
| printf("\nWarning: %s MAC addresses don't match:\n", |
| dev->name); |
| printf("Address in SROM is %pM\n", |
| dev->enetaddr); |
| printf("Address in environment is %pM\n", |
| env_enetaddr); |
| } |
| |
| memcpy(dev->enetaddr, env_enetaddr, 6); |
| } else if (is_valid_ethaddr(dev->enetaddr)) { |
| eth_setenv_enetaddr_by_index(base_name, eth_number, |
| dev->enetaddr); |
| printf("\nWarning: %s using MAC address from net device\n", |
| dev->name); |
| } else if (is_zero_ethaddr(dev->enetaddr)) { |
| #ifdef CONFIG_NET_RANDOM_ETHADDR |
| net_random_ethaddr(dev->enetaddr); |
| printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", |
| dev->name, eth_number, dev->enetaddr); |
| #else |
| printf("\nError: %s address not set.\n", |
| dev->name); |
| return -EINVAL; |
| #endif |
| } |
| |
| if (dev->write_hwaddr && !eth_mac_skip(eth_number)) { |
| if (!is_valid_ethaddr(dev->enetaddr)) { |
| printf("\nError: %s address %pM illegal value\n", |
| dev->name, dev->enetaddr); |
| return -EINVAL; |
| } |
| |
| ret = dev->write_hwaddr(dev); |
| if (ret) |
| printf("\nWarning: %s failed to set MAC address\n", |
| dev->name); |
| } |
| |
| return ret; |
| } |
| |
| int eth_register(struct eth_device *dev) |
| { |
| struct eth_device *d; |
| static int index; |
| |
| assert(strlen(dev->name) < sizeof(dev->name)); |
| |
| if (!eth_devices) { |
| eth_devices = dev; |
| eth_current = dev; |
| eth_current_changed(); |
| } else { |
| for (d = eth_devices; d->next != eth_devices; d = d->next) |
| ; |
| d->next = dev; |
| } |
| |
| dev->state = ETH_STATE_INIT; |
| dev->next = eth_devices; |
| dev->index = index++; |
| |
| return 0; |
| } |
| |
| int eth_unregister(struct eth_device *dev) |
| { |
| struct eth_device *cur; |
| |
| /* No device */ |
| if (!eth_devices) |
| return -ENODEV; |
| |
| for (cur = eth_devices; cur->next != eth_devices && cur->next != dev; |
| cur = cur->next) |
| ; |
| |
| /* Device not found */ |
| if (cur->next != dev) |
| return -ENODEV; |
| |
| cur->next = dev->next; |
| |
| if (eth_devices == dev) |
| eth_devices = dev->next == eth_devices ? NULL : dev->next; |
| |
| if (eth_current == dev) { |
| eth_current = eth_devices; |
| eth_current_changed(); |
| } |
| |
| return 0; |
| } |
| |
| int eth_initialize(void) |
| { |
| int num_devices = 0; |
| |
| eth_devices = NULL; |
| eth_current = NULL; |
| eth_common_init(); |
| |
| if (!eth_devices) { |
| puts("No ethernet found.\n"); |
| bootstage_error(BOOTSTAGE_ID_NET_ETH_START); |
| } else { |
| struct eth_device *dev = eth_devices; |
| char *ethprime = getenv("ethprime"); |
| |
| bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT); |
| do { |
| if (dev->index) |
| puts(", "); |
| |
| printf("%s", dev->name); |
| |
| if (ethprime && strcmp(dev->name, ethprime) == 0) { |
| eth_current = dev; |
| puts(" [PRIME]"); |
| } |
| |
| if (strchr(dev->name, ' ')) |
| puts("\nWarning: eth device name has a space!" |
| "\n"); |
| |
| eth_write_hwaddr(dev, "eth", dev->index); |
| |
| dev = dev->next; |
| num_devices++; |
| } while (dev != eth_devices); |
| |
| eth_current_changed(); |
| putc('\n'); |
| } |
| |
| return num_devices; |
| } |
| |
| #ifdef CONFIG_MCAST_TFTP |
| /* Multicast. |
| * mcast_addr: multicast ipaddr from which multicast Mac is made |
| * join: 1=join, 0=leave. |
| */ |
| int eth_mcast_join(struct in_addr mcast_ip, int join) |
| { |
| u8 mcast_mac[6]; |
| if (!eth_current || !eth_current->mcast) |
| return -1; |
| mcast_mac[5] = htonl(mcast_ip.s_addr) & 0xff; |
| mcast_mac[4] = (htonl(mcast_ip.s_addr)>>8) & 0xff; |
| mcast_mac[3] = (htonl(mcast_ip.s_addr)>>16) & 0x7f; |
| mcast_mac[2] = 0x5e; |
| mcast_mac[1] = 0x0; |
| mcast_mac[0] = 0x1; |
| return eth_current->mcast(eth_current, mcast_mac, join); |
| } |
| |
| /* the 'way' for ethernet-CRC-32. Spliced in from Linux lib/crc32.c |
| * and this is the ethernet-crc method needed for TSEC -- and perhaps |
| * some other adapter -- hash tables |
| */ |
| #define CRCPOLY_LE 0xedb88320 |
| u32 ether_crc(size_t len, unsigned char const *p) |
| { |
| int i; |
| u32 crc; |
| crc = ~0; |
| while (len--) { |
| crc ^= *p++; |
| for (i = 0; i < 8; i++) |
| crc = (crc >> 1) ^ ((crc & 1) ? CRCPOLY_LE : 0); |
| } |
| /* an reverse the bits, cuz of way they arrive -- last-first */ |
| crc = (crc >> 16) | (crc << 16); |
| crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); |
| crc = (crc >> 4 & 0x0f0f0f0f) | (crc << 4 & 0xf0f0f0f0); |
| crc = (crc >> 2 & 0x33333333) | (crc << 2 & 0xcccccccc); |
| crc = (crc >> 1 & 0x55555555) | (crc << 1 & 0xaaaaaaaa); |
| return crc; |
| } |
| |
| #endif |
| |
| |
| int eth_init(void) |
| { |
| struct eth_device *old_current; |
| |
| if (!eth_current) { |
| puts("No ethernet found.\n"); |
| return -ENODEV; |
| } |
| |
| old_current = eth_current; |
| do { |
| debug("Trying %s\n", eth_current->name); |
| |
| if (eth_current->init(eth_current, gd->bd) >= 0) { |
| eth_current->state = ETH_STATE_ACTIVE; |
| |
| return 0; |
| } |
| debug("FAIL\n"); |
| |
| eth_try_another(0); |
| } while (old_current != eth_current); |
| |
| return -ETIMEDOUT; |
| } |
| |
| void eth_halt(void) |
| { |
| if (!eth_current) |
| return; |
| |
| eth_current->halt(eth_current); |
| |
| eth_current->state = ETH_STATE_PASSIVE; |
| } |
| |
| int eth_send(void *packet, int length) |
| { |
| if (!eth_current) |
| return -ENODEV; |
| |
| return eth_current->send(eth_current, packet, length); |
| } |
| |
| int eth_rx(void) |
| { |
| if (!eth_current) |
| return -ENODEV; |
| |
| return eth_current->recv(eth_current); |
| } |
| #endif /* ifndef CONFIG_DM_ETH */ |
| |
| #ifdef CONFIG_API |
| static void eth_save_packet(void *packet, int length) |
| { |
| char *p = packet; |
| int i; |
| |
| if ((eth_rcv_last+1) % PKTBUFSRX == eth_rcv_current) |
| return; |
| |
| if (PKTSIZE < length) |
| return; |
| |
| for (i = 0; i < length; i++) |
| eth_rcv_bufs[eth_rcv_last].data[i] = p[i]; |
| |
| eth_rcv_bufs[eth_rcv_last].length = length; |
| eth_rcv_last = (eth_rcv_last + 1) % PKTBUFSRX; |
| } |
| |
| int eth_receive(void *packet, int length) |
| { |
| char *p = packet; |
| void *pp = push_packet; |
| int i; |
| |
| if (eth_rcv_current == eth_rcv_last) { |
| push_packet = eth_save_packet; |
| eth_rx(); |
| push_packet = pp; |
| |
| if (eth_rcv_current == eth_rcv_last) |
| return -1; |
| } |
| |
| length = min(eth_rcv_bufs[eth_rcv_current].length, length); |
| |
| for (i = 0; i < length; i++) |
| p[i] = eth_rcv_bufs[eth_rcv_current].data[i]; |
| |
| eth_rcv_current = (eth_rcv_current + 1) % PKTBUFSRX; |
| return length; |
| } |
| #endif /* CONFIG_API */ |
| |
| static void eth_current_changed(void) |
| { |
| char *act = getenv("ethact"); |
| /* update current ethernet name */ |
| if (eth_get_dev()) { |
| if (act == NULL || strcmp(act, eth_get_name()) != 0) |
| setenv("ethact", eth_get_name()); |
| } |
| /* |
| * remove the variable completely if there is no active |
| * interface |
| */ |
| else if (act != NULL) |
| setenv("ethact", NULL); |
| } |
| |
| void eth_try_another(int first_restart) |
| { |
| static void *first_failed; |
| char *ethrotate; |
| |
| /* |
| * Do not rotate between network interfaces when |
| * 'ethrotate' variable is set to 'no'. |
| */ |
| ethrotate = getenv("ethrotate"); |
| if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) |
| return; |
| |
| if (!eth_get_dev()) |
| return; |
| |
| if (first_restart) |
| first_failed = eth_get_dev(); |
| |
| eth_set_current_to_next(); |
| |
| eth_current_changed(); |
| |
| if (first_failed == eth_get_dev()) |
| net_restart_wrap = 1; |
| } |
| |
| void eth_set_current(void) |
| { |
| static char *act; |
| static int env_changed_id; |
| int env_id; |
| |
| env_id = get_env_id(); |
| if ((act == NULL) || (env_changed_id != env_id)) { |
| act = getenv("ethact"); |
| env_changed_id = env_id; |
| } |
| |
| if (act == NULL) { |
| char *ethprime = getenv("ethprime"); |
| void *dev = NULL; |
| |
| if (ethprime) |
| dev = eth_get_dev_by_name(ethprime); |
| if (dev) |
| eth_set_dev(dev); |
| else |
| eth_set_dev(NULL); |
| } else { |
| eth_set_dev(eth_get_dev_by_name(act)); |
| } |
| |
| eth_current_changed(); |
| } |
| |
| const char *eth_get_name(void) |
| { |
| return eth_get_dev() ? eth_get_dev()->name : "unknown"; |
| } |