board/hymod/hymod.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2001
  * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef _HYMOD_H_
 #define _HYMOD_H_

 #ifdef CONFIG_8260
 #include <asm/iopin_8260.h>
 #endif

 /*
  * hymod configuration data - passed by boot code via the board information
  * structure (only U-Boot has support for this at the moment)
  *
  * there are three types of data passed up from the boot monitor. the first
  * (type hymod_eeprom_t) is the eeprom data that was read off both the main
  * (or mother) board and the mezzanine board (if any). this data defines how
  * many Xilinx fpgas are on each board, and their types (among other things).
  * the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where
  * in the physical address space the various Xilinx fpga access regions have
  * been mapped by the boot rom. the third type of data (type xlx_iopins_t,
  * one per Xilinx fpga) defines which io port pins are connected to the various
  * signals required to program a Xilinx fpga.
  *
  * A ram/flash "bank" refers to memory controlled by the same chip select.
  *
  * the eeprom contents are defined as in technical note #2 - basically,
  * a header, zero or more records in no particular order, and a 32 bit crc
  * a record is 1 or more type bytes, a length byte and "length" bytes.
  */

 #define HYMOD_EEPROM_ID		0xAA	/* eeprom id byte */
 #define HYMOD_EEPROM_VER	1	/* eeprom contents version (0-127) */
 #define HYMOD_EEPROM_SIZE	256	/* number of bytes in the eeprom */

 /* eeprom header */
 typedef
     struct {
 	unsigned char id;		/* eeprom id byte */
 	unsigned char :1;
 	unsigned char ver:7;		/* eeprom contents version number */
 	unsigned long len;		/* total # of bytes btw hdr and crc */
     }
 hymod_eehdr_t;

 /* maximum number of bytes available for eeprom data records */
 #define HYMOD_EEPROM_MAXLEN	(HYMOD_EEPROM_SIZE \
 					- sizeof (hymod_eehdr_t) \
 					- sizeof (unsigned long))

 /* eeprom data record */
 typedef
     union {
 	struct {
 	    unsigned char topbit:1;
 	    unsigned char type:7;
 	    unsigned char len;
 	    unsigned char data[1];	/* variable length */
 	} small;
 	struct {
 	    unsigned short topbit:1;
 	    unsigned short nxtbit:1;
 	    unsigned short type:14;
 	    unsigned short len;
 	    unsigned char data[1];	/* variable length */
 	} medium;
 	struct {
 	    unsigned long topbit:1;
 	    unsigned long nxtbit:1;
 	    unsigned long type:30;
 	    unsigned long len;
 	    unsigned char data[1];	/* variable length */
 	} large;
     }
 hymod_eerec_t;

 #define HYMOD_EEOFF_MAIN	0x00	/* i2c addr offset for main eeprom */
 #define HYMOD_EEOFF_MEZZ	0x04	/* i2c addr offset for mezz eepomr */

 /* eeprom record types */
 #define HYMOD_EEREC_SERNO	1	/* serial number */
 #define HYMOD_EEREC_DATE	2	/* date */
 #define HYMOD_EEREC_BATCH	3	/* batch id */
 #define HYMOD_EEREC_TYPE	4	/* board type */
 #define HYMOD_EEREC_REV		5	/* revision number */
 #define HYMOD_EEREC_SDRAM	6	/* sdram sizes */
 #define HYMOD_EEREC_FLASH	7	/* flash sizes */
 #define HYMOD_EEREC_ZBT		8	/* zbt ram sizes */
 #define HYMOD_EEREC_XLXTYP	9	/* Xilinx fpga types */
 #define HYMOD_EEREC_XLXSPD	10	/* Xilinx fpga speeds */
 #define HYMOD_EEREC_XLXTMP	11	/* Xilinx fpga temperatures */
 #define HYMOD_EEREC_XLXGRD	12	/* Xilinx fpga grades */
 #define HYMOD_EEREC_CPUTYP	13	/* Motorola CPU type */
 #define HYMOD_EEREC_CPUSPD	14	/* CPU speed */
 #define HYMOD_EEREC_BUSSPD	15	/* bus speed */
 #define HYMOD_EEREC_CPMSPD	16	/* CPM speed */
 #define HYMOD_EEREC_HSTYPE	17	/* high-speed serial chip type */
 #define HYMOD_EEREC_HSCHIN	18	/* high-speed serial input channels */
 #define HYMOD_EEREC_HSCHOUT	19	/* high-speed serial output channels */

 /* some dimensions */
 #define HYMOD_MAX_BATCH		32	/* max no. of bytes in batch id */
 #define HYMOD_MAX_SDRAM		4	/* max sdram "banks" on any board */
 #define HYMOD_MAX_FLASH		4	/* max flash "banks" on any board */
 #define HYMOD_MAX_ZBT		16	/* max ZBT rams on any board */
 #define HYMOD_MAX_XLX		4	/* max Xilinx fpgas on any board */

 #define HYMOD_MAX_BYTES		16	/* enough to store any bytes array */

 /* board types */
 #define HYMOD_BDTYPE_NONE	0	/* information not present */
 #define HYMOD_BDTYPE_IO		1	/* I/O main board */
 #define HYMOD_BDTYPE_CLP	2	/* CLP main board */
 #define HYMOD_BDTYPE_DSP	3	/* DSP main board */
 #define HYMOD_BDTYPE_INPUT	4	/* video input mezzanine board */
 #define HYMOD_BDTYPE_ALTINPUT	5	/* video input mezzanine board */
 #define HYMOD_BDTYPE_DISPLAY	6	/* video display mezzanine board */
 #define HYMOD_BDTYPE_MAX	7	/* first invalid value */

 /* Xilinx fpga types */
 #define HYMOD_XTYP_NONE		0	/* information not present */
 #define HYMOD_XTYP_XCV300E	1	/* Xilinx Virtex 300 */
 #define HYMOD_XTYP_XCV400E	2	/* Xilinx Virtex 400 */
 #define HYMOD_XTYP_XCV600E	3	/* Xilinx Virtex 600 */
 #define HYMOD_XTYP_MAX		4	/* first invalid value */

 /* Xilinx fpga speeds */
 #define HYMOD_XSPD_NONE		0	/* information not present */
 #define HYMOD_XSPD_SIX		1
 #define HYMOD_XSPD_SEVEN	2
 #define HYMOD_XSPD_EIGHT	3
 #define HYMOD_XSPD_MAX		4	/* first invalid value */

 /* Xilinx fpga temperatures */
 #define HYMOD_XTMP_NONE		0	/* information not present */
 #define HYMOD_XTMP_COM		1
 #define HYMOD_XTMP_IND		2
 #define HYMOD_XTMP_MAX		3	/* first invalid value */

 /* Xilinx fpga grades */
 #define HYMOD_XTMP_NONE		0	/* information not present */
 #define HYMOD_XTMP_NORMAL	1
 #define HYMOD_XTMP_ENGSAMP	2
 #define HYMOD_XTMP_MAX		3	/* first invalid value */

 /* CPU types */
 #define HYMOD_CPUTYPE_NONE	0	/* information not present */
 #define HYMOD_CPUTYPE_MPC8260	1	/* Motorola MPC8260 embedded powerpc */
 #define HYMOD_CPUTYPE_MAX	2	/* first invalid value */

 /* CPU/BUS/CPM clock speeds */
 #define HYMOD_CLKSPD_NONE	0	/* information not present */
 #define HYMOD_CLKSPD_33MHZ	1
 #define HYMOD_CLKSPD_66MHZ	2
 #define HYMOD_CLKSPD_100MHZ	3
 #define HYMOD_CLKSPD_133MHZ	4
 #define HYMOD_CLKSPD_166MHZ	5
 #define HYMOD_CLKSPD_200MHZ	6
 #define HYMOD_CLKSPD_MAX	7	/* first invalid value */

 /* high speed serial chip types */
 #define HYMOD_HSSTYPE_NONE	0	/* information not present */
 #define HYMOD_HSSTYPE_AMCC52064	1
 #define HYMOD_HSSTYPE_MAX	2	/* first invalid value */

 /* a date (yyyy-mm-dd) */
 typedef
     struct {
 	unsigned short year;
 	unsigned char month;
 	unsigned char day;
     }
 hymod_date_t;

 /* describes a Xilinx fpga */
 typedef
     struct {
 	unsigned char type;		/* chip type */
 	unsigned char speed;		/* chip speed rating */
 	unsigned char temp;		/* chip temperature rating */
 	unsigned char grade;		/* chip grade */
     }
 hymod_xlx_t;

 /* describes a Motorola embedded processor */
 typedef
     struct {
 	unsigned char type;		/* CPU type */
 	unsigned char cpuspd;		/* speed of the PowerPC core */
 	unsigned char busspd;		/* speed of the system and 60x bus */
 	unsigned char cpmspd;		/* speed of the CPM co-processor */
     }
 hymod_mpc_t;

 /* info about high-speed (1Gbit) serial interface */
 typedef
     struct {
 	unsigned char type;		/* high-speed serial chip type */
 	unsigned char nchin;		/* number of input channels mounted */
 	unsigned char nchout;		/* number of output channels mounted */
     }
 hymod_hss_t;

 /*
  * this defines the contents of the serial eeprom that exists on every
  * hymod board, including mezzanine boards (the serial eeprom will be
  * faked for early development boards that don't have one)
  */

 typedef
     struct {
 	unsigned char valid:1;		/* contents of this struct is valid */
 	unsigned char ver:7;		/* eeprom contents version */
 	unsigned char bdtype;		/* board type */
 	unsigned char bdrev;		/* board revision */
 	unsigned char batchlen;		/* length of batch string below */
 	unsigned long serno;		/* serial number */
 	hymod_date_t date;		/* manufacture date */
 	unsigned char batch[32];	/* manufacturer specific batch id */
 	unsigned char nsdram;		/* # of ram "banks" */
 	unsigned char nflash;		/* # of flash "banks" */
 	unsigned char nzbt;		/* # of ZBT rams */
 	unsigned char nxlx;		/* # of Xilinx fpgas */
 	unsigned char sdramsz[HYMOD_MAX_SDRAM];	/* log2 of sdram size */
 	unsigned char flashsz[HYMOD_MAX_FLASH];	/* log2 of flash size */
 	unsigned char zbtsz[HYMOD_MAX_ZBT];	/* log2 of ZBT ram size */
 	hymod_xlx_t xlx[HYMOD_MAX_XLX];	/* Xilinx fpga info */
 	hymod_mpc_t mpc;		/* Motorola MPC CPU info */
 	hymod_hss_t hss;		/* high-speed serial info */
     }
 hymod_eeprom_t;

 /*
  * this defines a region in the processor's physical address space
  */
 typedef
     struct {
 	unsigned long exists:1;		/* 1 if the region exists, 0 if not */
 	unsigned long size:31;		/* size in bytes */
 	unsigned long base;		/* base address */
     }
 xlx_prgn_t;

 /*
  * this defines where the various Xilinx fpga access regions are mapped
  * into the physical address space of the processor
  */
 typedef
     struct {
 	xlx_prgn_t prog;		/* program access region */
 	xlx_prgn_t reg;			/* register access region */
 	xlx_prgn_t port;		/* port access region */
     }
 xlx_mmap_t;

 /*
  * this defines which 8260 i/o port pins are connected to the various
  * signals required for programming a Xilinx fpga
  */
 typedef
     struct {
 	iopin_t prog_pin;		/* assert for >= 300ns to program */
 	iopin_t init_pin;		/* goes high when fpga is cleared */
 	iopin_t done_pin;		/* goes high when program is done */
 	iopin_t enable_pin;		/* some fpgas need enabling */
     }
 xlx_iopins_t;

 /* all info about one Xilinx chip */
 typedef
     struct {
 	xlx_mmap_t mmap;
 	xlx_iopins_t iopins;
 	unsigned long irq:8;		/* h/w intr req number for this fpga */
     }
 xlx_info_t;

 /* all info about one hymod board */
 typedef
     struct {
 	hymod_eeprom_t eeprom;
 	xlx_info_t xlx[HYMOD_MAX_XLX];
     }
 hymod_board_t;

 /*
  * this defines the configuration information of a hymod board-set
  * (main board + possible mezzanine board). In future, there may be
  * more than one mezzanine board (stackable?) - if so, add a "mezz2"
  * field, and so on... or make mezz an array?
  */
 typedef
     struct {
 	unsigned long ver:8;		/* version control */
 	hymod_board_t main;		/* main board info */
 	hymod_board_t mezz;		/* mezzanine board info */
 	unsigned long crc;		/* ensures kernel and boot prom agree */
     }
 hymod_conf_t;

 #endif /* _HYMOD_H_ */
	/*
	* (C) Copyright 2001
	* Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef _HYMOD_H_
	#define _HYMOD_H_

	#ifdef CONFIG_8260
	#include <asm/iopin_8260.h>
	#endif

	/*
	* hymod configuration data - passed by boot code via the board information
	* structure (only U-Boot has support for this at the moment)
	*
	* there are three types of data passed up from the boot monitor. the first
	* (type hymod_eeprom_t) is the eeprom data that was read off both the main
	* (or mother) board and the mezzanine board (if any). this data defines how
	* many Xilinx fpgas are on each board, and their types (among other things).
	* the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where
	* in the physical address space the various Xilinx fpga access regions have
	* been mapped by the boot rom. the third type of data (type xlx_iopins_t,
	* one per Xilinx fpga) defines which io port pins are connected to the various
	* signals required to program a Xilinx fpga.
	*
	* A ram/flash "bank" refers to memory controlled by the same chip select.
	*
	* the eeprom contents are defined as in technical note #2 - basically,
	* a header, zero or more records in no particular order, and a 32 bit crc
	* a record is 1 or more type bytes, a length byte and "length" bytes.
	*/

	#define HYMOD_EEPROM_ID 0xAA /* eeprom id byte */
	#define HYMOD_EEPROM_VER 1 /* eeprom contents version (0-127) */
	#define HYMOD_EEPROM_SIZE 256 /* number of bytes in the eeprom */

	/* eeprom header */
	typedef
	struct {
	unsigned char id; /* eeprom id byte */
	unsigned char :1;
	unsigned char ver:7; /* eeprom contents version number */
	unsigned long len; /* total # of bytes btw hdr and crc */
	}
	hymod_eehdr_t;

	/* maximum number of bytes available for eeprom data records */
	#define HYMOD_EEPROM_MAXLEN (HYMOD_EEPROM_SIZE \
	- sizeof (hymod_eehdr_t) \
	- sizeof (unsigned long))

	/* eeprom data record */
	typedef
	union {
	struct {
	unsigned char topbit:1;
	unsigned char type:7;
	unsigned char len;
	unsigned char data[1]; /* variable length */
	} small;
	struct {
	unsigned short topbit:1;
	unsigned short nxtbit:1;
	unsigned short type:14;
	unsigned short len;
	unsigned char data[1]; /* variable length */
	} medium;
	struct {
	unsigned long topbit:1;
	unsigned long nxtbit:1;
	unsigned long type:30;
	unsigned long len;
	unsigned char data[1]; /* variable length */
	} large;
	}
	hymod_eerec_t;

	#define HYMOD_EEOFF_MAIN 0x00 /* i2c addr offset for main eeprom */
	#define HYMOD_EEOFF_MEZZ 0x04 /* i2c addr offset for mezz eepomr */

	/* eeprom record types */
	#define HYMOD_EEREC_SERNO 1 /* serial number */
	#define HYMOD_EEREC_DATE 2 /* date */
	#define HYMOD_EEREC_BATCH 3 /* batch id */
	#define HYMOD_EEREC_TYPE 4 /* board type */
	#define HYMOD_EEREC_REV 5 /* revision number */
	#define HYMOD_EEREC_SDRAM 6 /* sdram sizes */
	#define HYMOD_EEREC_FLASH 7 /* flash sizes */
	#define HYMOD_EEREC_ZBT 8 /* zbt ram sizes */
	#define HYMOD_EEREC_XLXTYP 9 /* Xilinx fpga types */
	#define HYMOD_EEREC_XLXSPD 10 /* Xilinx fpga speeds */
	#define HYMOD_EEREC_XLXTMP 11 /* Xilinx fpga temperatures */
	#define HYMOD_EEREC_XLXGRD 12 /* Xilinx fpga grades */
	#define HYMOD_EEREC_CPUTYP 13 /* Motorola CPU type */
	#define HYMOD_EEREC_CPUSPD 14 /* CPU speed */
	#define HYMOD_EEREC_BUSSPD 15 /* bus speed */
	#define HYMOD_EEREC_CPMSPD 16 /* CPM speed */
	#define HYMOD_EEREC_HSTYPE 17 /* high-speed serial chip type */
	#define HYMOD_EEREC_HSCHIN 18 /* high-speed serial input channels */
	#define HYMOD_EEREC_HSCHOUT 19 /* high-speed serial output channels */

	/* some dimensions */
	#define HYMOD_MAX_BATCH 32 /* max no. of bytes in batch id */
	#define HYMOD_MAX_SDRAM 4 /* max sdram "banks" on any board */
	#define HYMOD_MAX_FLASH 4 /* max flash "banks" on any board */
	#define HYMOD_MAX_ZBT 16 /* max ZBT rams on any board */
	#define HYMOD_MAX_XLX 4 /* max Xilinx fpgas on any board */

	#define HYMOD_MAX_BYTES 16 /* enough to store any bytes array */

	/* board types */
	#define HYMOD_BDTYPE_NONE 0 /* information not present */
	#define HYMOD_BDTYPE_IO 1 /* I/O main board */
	#define HYMOD_BDTYPE_CLP 2 /* CLP main board */
	#define HYMOD_BDTYPE_DSP 3 /* DSP main board */
	#define HYMOD_BDTYPE_INPUT 4 /* video input mezzanine board */
	#define HYMOD_BDTYPE_ALTINPUT 5 /* video input mezzanine board */
	#define HYMOD_BDTYPE_DISPLAY 6 /* video display mezzanine board */
	#define HYMOD_BDTYPE_MAX 7 /* first invalid value */

	/* Xilinx fpga types */
	#define HYMOD_XTYP_NONE 0 /* information not present */
	#define HYMOD_XTYP_XCV300E 1 /* Xilinx Virtex 300 */
	#define HYMOD_XTYP_XCV400E 2 /* Xilinx Virtex 400 */
	#define HYMOD_XTYP_XCV600E 3 /* Xilinx Virtex 600 */
	#define HYMOD_XTYP_MAX 4 /* first invalid value */

	/* Xilinx fpga speeds */
	#define HYMOD_XSPD_NONE 0 /* information not present */
	#define HYMOD_XSPD_SIX 1
	#define HYMOD_XSPD_SEVEN 2
	#define HYMOD_XSPD_EIGHT 3
	#define HYMOD_XSPD_MAX 4 /* first invalid value */

	/* Xilinx fpga temperatures */
	#define HYMOD_XTMP_NONE 0 /* information not present */
	#define HYMOD_XTMP_COM 1
	#define HYMOD_XTMP_IND 2
	#define HYMOD_XTMP_MAX 3 /* first invalid value */

	/* Xilinx fpga grades */
	#define HYMOD_XTMP_NONE 0 /* information not present */
	#define HYMOD_XTMP_NORMAL 1
	#define HYMOD_XTMP_ENGSAMP 2
	#define HYMOD_XTMP_MAX 3 /* first invalid value */

	/* CPU types */
	#define HYMOD_CPUTYPE_NONE 0 /* information not present */
	#define HYMOD_CPUTYPE_MPC8260 1 /* Motorola MPC8260 embedded powerpc */
	#define HYMOD_CPUTYPE_MAX 2 /* first invalid value */

	/* CPU/BUS/CPM clock speeds */
	#define HYMOD_CLKSPD_NONE 0 /* information not present */
	#define HYMOD_CLKSPD_33MHZ 1
	#define HYMOD_CLKSPD_66MHZ 2
	#define HYMOD_CLKSPD_100MHZ 3
	#define HYMOD_CLKSPD_133MHZ 4
	#define HYMOD_CLKSPD_166MHZ 5
	#define HYMOD_CLKSPD_200MHZ 6
	#define HYMOD_CLKSPD_MAX 7 /* first invalid value */

	/* high speed serial chip types */
	#define HYMOD_HSSTYPE_NONE 0 /* information not present */
	#define HYMOD_HSSTYPE_AMCC52064 1
	#define HYMOD_HSSTYPE_MAX 2 /* first invalid value */

	/* a date (yyyy-mm-dd) */
	typedef
	struct {
	unsigned short year;
	unsigned char month;
	unsigned char day;
	}
	hymod_date_t;

	/* describes a Xilinx fpga */
	typedef
	struct {
	unsigned char type; /* chip type */
	unsigned char speed; /* chip speed rating */
	unsigned char temp; /* chip temperature rating */
	unsigned char grade; /* chip grade */
	}
	hymod_xlx_t;

	/* describes a Motorola embedded processor */
	typedef
	struct {
	unsigned char type; /* CPU type */
	unsigned char cpuspd; /* speed of the PowerPC core */
	unsigned char busspd; /* speed of the system and 60x bus */
	unsigned char cpmspd; /* speed of the CPM co-processor */
	}
	hymod_mpc_t;

	/* info about high-speed (1Gbit) serial interface */
	typedef
	struct {
	unsigned char type; /* high-speed serial chip type */
	unsigned char nchin; /* number of input channels mounted */
	unsigned char nchout; /* number of output channels mounted */
	}
	hymod_hss_t;

	/*
	* this defines the contents of the serial eeprom that exists on every
	* hymod board, including mezzanine boards (the serial eeprom will be
	* faked for early development boards that don't have one)
	*/

	typedef
	struct {
	unsigned char valid:1; /* contents of this struct is valid */
	unsigned char ver:7; /* eeprom contents version */
	unsigned char bdtype; /* board type */
	unsigned char bdrev; /* board revision */
	unsigned char batchlen; /* length of batch string below */
	unsigned long serno; /* serial number */
	hymod_date_t date; /* manufacture date */
	unsigned char batch[32]; /* manufacturer specific batch id */
	unsigned char nsdram; /* # of ram "banks" */
	unsigned char nflash; /* # of flash "banks" */
	unsigned char nzbt; /* # of ZBT rams */
	unsigned char nxlx; /* # of Xilinx fpgas */
	unsigned char sdramsz[HYMOD_MAX_SDRAM]; /* log2 of sdram size */
	unsigned char flashsz[HYMOD_MAX_FLASH]; /* log2 of flash size */
	unsigned char zbtsz[HYMOD_MAX_ZBT]; /* log2 of ZBT ram size */
	hymod_xlx_t xlx[HYMOD_MAX_XLX]; /* Xilinx fpga info */
	hymod_mpc_t mpc; /* Motorola MPC CPU info */
	hymod_hss_t hss; /* high-speed serial info */
	}
	hymod_eeprom_t;

	/*
	* this defines a region in the processor's physical address space
	*/
	typedef
	struct {
	unsigned long exists:1; /* 1 if the region exists, 0 if not */
	unsigned long size:31; /* size in bytes */
	unsigned long base; /* base address */
	}
	xlx_prgn_t;

	/*
	* this defines where the various Xilinx fpga access regions are mapped
	* into the physical address space of the processor
	*/
	typedef
	struct {
	xlx_prgn_t prog; /* program access region */
	xlx_prgn_t reg; /* register access region */
	xlx_prgn_t port; /* port access region */
	}
	xlx_mmap_t;

	/*
	* this defines which 8260 i/o port pins are connected to the various
	* signals required for programming a Xilinx fpga
	*/
	typedef
	struct {
	iopin_t prog_pin; /* assert for >= 300ns to program */
	iopin_t init_pin; /* goes high when fpga is cleared */
	iopin_t done_pin; /* goes high when program is done */
	iopin_t enable_pin; /* some fpgas need enabling */
	}
	xlx_iopins_t;

	/* all info about one Xilinx chip */
	typedef
	struct {
	xlx_mmap_t mmap;
	xlx_iopins_t iopins;
	unsigned long irq:8; /* h/w intr req number for this fpga */
	}
	xlx_info_t;

	/* all info about one hymod board */
	typedef
	struct {
	hymod_eeprom_t eeprom;
	xlx_info_t xlx[HYMOD_MAX_XLX];
	}
	hymod_board_t;

	/*
	* this defines the configuration information of a hymod board-set
	* (main board + possible mezzanine board). In future, there may be
	* more than one mezzanine board (stackable?) - if so, add a "mezz2"
	* field, and so on... or make mezz an array?
	*/
	typedef
	struct {
	unsigned long ver:8; /* version control */
	hymod_board_t main; /* main board info */
	hymod_board_t mezz; /* mezzanine board info */
	unsigned long crc; /* ensures kernel and boot prom agree */
	}
	hymod_conf_t;

	#endif /* _HYMOD_H_ */