include/configs/BC3450.h - github/trini/u-boot - Gitiles

 /*
  * -- Version 1.1 --
  *
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004-2005
  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  *
  * (C) Copyright 2005
  * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de.
  *
  * History:
  *	1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  */
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU	    */
 #define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU)   */
 #define CONFIG_TQM5200		1	/* ... on a TQM5200 module	    */

 #define CONFIG_BC3450		1	/* ... on a BC3450 mainboard	    */
 #define CONFIG_BC3450_PS2	1	/*  + a PS/2 converter onboard	    */
 #define CONFIG_BC3450_IDE	1	/*  + IDE drives (Compact Flash)    */
 #define CONFIG_BC3450_USB	1	/*  + USB support		    */
 # define CONFIG_FAT		1	/*    + FAT support		    */
 # define CONFIG_EXT2		1	/*    + EXT2 support		    */
 #undef CONFIG_BC3450_BUZZER		/*  + Buzzer onboard		    */
 #undef CONFIG_BC3450_CAN		/*  + CAN transceiver		    */
 #undef CONFIG_BC3450_DS1340		/*  + a RTC DS1340 onboard	    */
 #undef CONFIG_BC3450_DS3231		/*  + a RTC DS3231 onboard	tbd */
 #undef CONFIG_BC3450_AC97		/*  + AC97 on PSC2,		tbd */
 #define CONFIG_BC3450_FP	1	/*  + enable FP O/P		    */
 #undef CONFIG_BC3450_CRT		/*  + enable CRT O/P (Debug only!)  */

 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz	    */

 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot		    */

 #define CONFIG_HIGH_BATS	1	/* High BATs supported		    */

 /*
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps		*/
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

 /*
  * AT-PS/2 Multiplexer
  */
 #ifdef CONFIG_BC3450_PS2
 # define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 # define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 # define CONFIG_PS2SERIAL	6		/* .. on PSC6		*/
 # define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 # define CONFIG_BOARD_EARLY_INIT_R
 #endif /* CONFIG_BC3450_PS2 */

 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
 # define CONFIG_PCI		1
 # define CONFIG_PCI_PNP		1
 /* #define CONFIG_PCI_SCAN_SHOW 1 */
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1

 #define CONFIG_PCI_MEM_BUS	0x40000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
 #define CONFIG_PCI_MEM_SIZE	0x10000000

 #define CONFIG_PCI_IO_BUS	0x50000000
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000

 #define CONFIG_NET_MULTI	1
 /*#define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1

 /*
  * Video console
  */
 # define CONFIG_VIDEO
 # define CONFIG_VIDEO_SM501
 # define CONFIG_VIDEO_SM501_32BPP
 # define CONFIG_CFB_CONSOLE
 # define CONFIG_VIDEO_LOGO
 # define CONFIG_VGA_AS_SINGLE_DEVICE
 # define CONFIG_CONSOLE_EXTRA_INFO	/* display Board/Device-Infos */
 # define CONFIG_VIDEO_SW_CURSOR
 # define CONFIG_SPLASH_SCREEN
 # define CONFIG_SYS_CONSOLE_IS_IN_ENV

 /*
  * Partitions
  */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION

 /*
  * USB
  */
 #ifdef CONFIG_BC3450_USB
 # define CONFIG_USB_OHCI
 # define CONFIG_USB_STORAGE
 #endif /* CONFIG_BC3450_USB */

 /*
  * POST support
  */
 #define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
 				 CONFIG_SYS_POST_CPU	   | \
 				 CONFIG_SYS_POST_I2C)

 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
 # define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
 #endif /* CONFIG_POST */


 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP

 #ifdef CONFIG_VIDEO
     #define CONFIG_CMD_BMP
 #endif

 #ifdef CONFIG_BC3450_IDE
     #define CONFIG_CMD_IDE
 #endif

 #if defined(CONFIG_BC3450_IDE) || defined(CONFIG_BC3450_USB)
     #ifdef CONFIG_FAT
 	#define CONFIG_CMD_FAT
     #endif

     #ifdef CONFIG_EXT2
 	#define CONFIG_CMD_EXT2
     #endif
 #endif

 #ifdef CONFIG_BC3450_USB
     #define CONFIG_CMD_USB
 #endif

 #ifdef CONFIG_PCI
     #define CONFIG_CMD_PCI
 #endif

 #ifdef CONFIG_POST
     #define CONFIG_CMD_DIAG
 #endif


 #define CONFIG_TIMESTAMP		/* display image timestamps */

 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
 #   define CONFIG_SYS_LOWBOOT		1
 #endif

 /*
  * Autobooting
  */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

 #define CONFIG_PREBOOT	"echo;" \
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo;"

 #undef	CONFIG_BOOTARGS

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"ipaddr=192.168.1.10\0"						\
 	"serverip=192.168.1.3\0"					\
 	"netmask=255.255.255.0\0"					\
 	"hostname=bc3450\0"						\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"kernel_addr=fc0a0000\0"					\
 	"ramdisk_addr=fc1c0000\0"					\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$(serverip):$(rootpath)\0"			\
 	"ideargs=setenv bootargs root=/dev/hda2 ro\0"			\
 	"addip=setenv bootargs $(bootargs) "				\
 		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
 		":$(hostname):$(netdev):off panic=1\0"			\
 	"addcons=setenv bootargs $(bootargs) "				\
 		"console=ttyS0,$(baudrate) console=tty0\0"		\
 	"flash_self=run ramargs addip addcons;"				\
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0"	\
 	"net_nfs=tftp 200000 $(bootfile); "				\
 		"run nfsargs addip addcons; bootm\0"			\
 	"ide_nfs=run nfsargs addip addcons; "				\
 		"disk 200000 0:1; bootm\0"				\
 	"ide_ide=run ideargs addip addcons; "				\
 		"disk 200000 0:1; bootm\0"				\
 	"usb_self=run usbload; run ramargs addip addcons; "		\
 		"bootm 200000 400000\0"					\
 	"usbload=usb reset; usb scan; usbboot 200000 0:1; "		\
 		"usbboot 400000 0:2\0"					\
 	"bootfile=uImage\0"						\
 	"load=tftp 200000 $(u-boot)\0"					\
 	"u-boot=u-boot.bin\0"						\
 	"update=protect off FC000000 FC05FFFF;"				\
 		"erase FC000000 FC05FFFF;"				\
 		"cp.b 200000 FC000000 $(filesize);"			\
 		"protect on FC000000 FC05FFFF\0"			\
 	""

 #define CONFIG_BOOTCOMMAND	"run flash_self"

 /*
  * IPB Bus clocking configuration.
  */
 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */

 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
  * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
 #if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 # define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif

 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 */

 /*
  * I2C clock frequency
  *
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
  * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
 #define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
 #define CONFIG_SYS_I2C_SLAVE		0x7F

 /*
  * EEPROM configuration for I²C EEPROM M24C32
  * M24C64 should work also. For other EEPROMs config should be verified.
  *
  * The TQM5200 module may hold an EEPROM at address 0x50.
  */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x (TQM) */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70

 /*
  * RTC configuration
  */
 #if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231)
 # define CONFIG_RTC_M41T11	1
 # define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #else
 # define CONFIG_RTC_MPC5200	1	/* use MPC5200 internal RTC */
 # define CONFIG_BOARD_EARLY_INIT_R
 #endif

 /*
  * Flash configuration
  */
 #define CONFIG_SYS_FLASH_BASE		TEXT_BASE /* 0xFC000000 */

 /* use CFI flash driver if no module variant is spezified */
 #define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
 #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */

 #if !defined(CONFIG_SYS_LOWBOOT)
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
 #else	/* CONFIG_SYS_LOWBOOT */
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
 #endif	/* CONFIG_SYS_LOWBOOT */
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/

 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
 #define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
 						"1408k(kernel),"	\
 						"2m(initrd),"		\
 						"4m(small-fs),"		\
 						"16m(big-fs),"		\
 						"8m(misc)"

 /*
  * Environment settings
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SIZE		0x10000
 #define CONFIG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)

 /*
  * Memory map
  */
 #define CONFIG_SYS_MBAR		0xF0000000
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_DEFAULT_MBAR	0x80000000

 /* Use ON-Chip SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
 # define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
 # define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif /*CONFIG_POST*/

 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* Bytes reserved for initial data  */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT		1
 #endif

 #define CONFIG_SYS_MONITOR_LEN		(384 << 10) /* Reserve 384 kB for Monitor   */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */

 /*
  * Ethernet configuration
  *
  * Define CONFIG_MPC5xxx_MII10 to force FEC at 10MBIT
  */
 #define CONFIG_MPC5xxx_FEC	1
 #define CONFIG_MPC5xxx_FEC_MII100
 #undef CONFIG_MPC5xxx_MII10
 #define CONFIG_PHY_ADDR		0x00

 /*
  * GPIO configuration on BC3450
  *
  *  PSC1:   UART1 (Service-UART)	 [0x xxxxxxx4]
  *  PSC2:   UART2			 [0x xxxxxx4x]
  *    or:   AC/97 if CONFIG_BC3450_AC97	 [0x xxxxxx2x]
  *  PSC3:   USB2			 [0x xxxxx1xx]
  *  USB:    UART4(ext.)/UART5(int.)	 [0x xxxx2xxx]
  *	      (this has to match
  *	      CONFIG_USB_CONFIG which is
  *	      used by usb_ohci.c to set
  *	      the USB ports)
  *  Eth:    10/100Mbit Ethernet		 [0x xxx0xxxx]
  *	      (this is reset to '5'
  *	      in FEC driver: fec.c)
  *  PSC6:   UART6 (int. to PS/2 contr.)	 [0x xx5xxxxx]
  *  ATA/CS: ???				 [0x x1xxxxxx]
  *	    FIXME! UM Fig 2-10 suggests	 [0x x0xxxxxx]
  *  CS1:    Use Pin gpio_wkup_6 as second
  *	    SDRAM chip select (mem_cs1)
  *  Timer:  CAN2 / SPI
  *  I2C:    CAN1 / I²C2		  [0x bxxxxxxx]
  */
 #ifdef CONFIG_BC3450_AC97
 # define CONFIG_SYS_GPS_PORT_CONFIG	0xb1502124
 #else /* PSC2=UART2 */
 # define CONFIG_SYS_GPS_PORT_CONFIG	0xb1502144
 #endif

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP				/* undef to save memory	    */
 #define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
 #else
 #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size  */
 #endif
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size  */
 #define CONFIG_SYS_MAXARGS		16		/* max no of command args   */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Arg. Buffer Size    */

 #define CONFIG_SYS_ALT_MEMTEST				/* Enable an alternative,   */
 						/*  more extensive mem test */

 #define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	    */
 #define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	    */

 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	    */

 #define CONFIG_SYS_HZ			1000		/* dec freq: 1ms ticks	    */

 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		    */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
 #endif

 /*
  * Enable loopw command.
  */
 #define CONFIG_LOOPW

 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
 # define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 # define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
 # define CONFIG_SYS_HID0_INIT		0
 # define CONFIG_SYS_HID0_FINAL		0
 #endif

 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 # define CONFIG_SYS_BOOTCS_CFG		0x0008DF30	/* for pci_clk	= 66 MHz */
 #else
 # define CONFIG_SYS_BOOTCS_CFG		0x0004DF30	/* for pci_clk = 33 MHz	 */
 #endif
 #define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE

 /* automatic configuration of chip selects */
 #ifdef CONFIG_TQM5200
 # define CONFIG_LAST_STAGE_INIT
 #endif /* CONFIG_TQM5200 */

 /*
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
 #ifdef CONFIG_TQM5200
 # define CONFIG_SYS_CS2_START		0xE5000000
 # define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
 # define CONFIG_SYS_CS2_CFG		0x0004D930
 #endif /* CONFIG_TQM5200 */

 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
 #ifdef CONFIG_TQM5200
 # define SM501_FB_BASE		0xE0000000
 # define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
 # define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
 # define CONFIG_SYS_CS1_CFG		0x8F48FF70
 # define SM501_MMIO_BASE	CONFIG_SYS_CS1_START + 0x03E00000
 #endif /* CONFIG_TQM5200 */

 #define CONFIG_SYS_CS_BURST		0x00000000
 #define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for	*/
 						/*  flash and SM501	*/

 #define CONFIG_SYS_RESET_ADDRESS	0xff000000

 /*
  * USB stuff
  */
 #define CONFIG_USB_CLOCK	0x0001BBBB
 #define CONFIG_USB_CONFIG	0x00002000	/* we're using Port 2	*/

 /*
  * IDE/ATA stuff Supports IDE harddisk
  */
 #undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */

 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	  not supported */
 #undef	CONFIG_IDE_LED			/* LED for ide	  not supported */

 #define CONFIG_IDE_RESET		/* reset for ide      supported */
 #define CONFIG_IDE_PREINIT

 #define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
 #define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/

 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

 #define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA

 /* Offset for data I/O */
 #define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)

 /* Offset for normal register accesses */
 #define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)

 /* Offset for alternate registers */
 #define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)

 /* Interval between registers */
 #define CONFIG_SYS_ATA_STRIDE		4

 #endif /* __CONFIG_H */
	/*
	* -- Version 1.1 --
	*
	* (C) Copyright 2003-2005
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* (C) Copyright 2004-2005
	* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
	*
	* (C) Copyright 2005
	* Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de.
	*
	* History:
	* 1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	*/
	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
	#define CONFIG_TQM5200 1 /* ... on a TQM5200 module */

	#define CONFIG_BC3450 1 /* ... on a BC3450 mainboard */
	#define CONFIG_BC3450_PS2 1 /* + a PS/2 converter onboard */
	#define CONFIG_BC3450_IDE 1 /* + IDE drives (Compact Flash) */
	#define CONFIG_BC3450_USB 1 /* + USB support */
	# define CONFIG_FAT 1 /* + FAT support */
	# define CONFIG_EXT2 1 /* + EXT2 support */
	#undef CONFIG_BC3450_BUZZER /* + Buzzer onboard */
	#undef CONFIG_BC3450_CAN /* + CAN transceiver */
	#undef CONFIG_BC3450_DS1340 /* + a RTC DS1340 onboard */
	#undef CONFIG_BC3450_DS3231 /* + a RTC DS3231 onboard tbd */
	#undef CONFIG_BC3450_AC97 /* + AC97 on PSC2, tbd */
	#define CONFIG_BC3450_FP 1 /* + enable FP O/P */
	#undef CONFIG_BC3450_CRT /* + enable CRT O/P (Debug only!) */

	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CONFIG_HIGH_BATS 1 /* High BATs supported */

	/*
	* Serial console configuration
	*/
	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	/*
	* AT-PS/2 Multiplexer
	*/
	#ifdef CONFIG_BC3450_PS2
	# define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
	# define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
	# define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
	# define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */
	# define CONFIG_BOARD_EARLY_INIT_R
	#endif /* CONFIG_BC3450_PS2 */

	/*
	* PCI Mapping:
	* 0x40000000 - 0x4fffffff - PCI Memory
	* 0x50000000 - 0x50ffffff - PCI IO Space
	*/
	# define CONFIG_PCI 1
	# define CONFIG_PCI_PNP 1
	/* #define CONFIG_PCI_SCAN_SHOW 1 */
	#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1

	#define CONFIG_PCI_MEM_BUS 0x40000000
	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	#define CONFIG_PCI_MEM_SIZE 0x10000000

	#define CONFIG_PCI_IO_BUS 0x50000000
	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	#define CONFIG_PCI_IO_SIZE 0x01000000

	#define CONFIG_NET_MULTI 1
	/#define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled /
	#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
	#define CONFIG_NS8382X 1

	/*
	* Video console
	*/
	# define CONFIG_VIDEO
	# define CONFIG_VIDEO_SM501
	# define CONFIG_VIDEO_SM501_32BPP
	# define CONFIG_CFB_CONSOLE
	# define CONFIG_VIDEO_LOGO
	# define CONFIG_VGA_AS_SINGLE_DEVICE
	# define CONFIG_CONSOLE_EXTRA_INFO /* display Board/Device-Infos */
	# define CONFIG_VIDEO_SW_CURSOR
	# define CONFIG_SPLASH_SCREEN
	# define CONFIG_SYS_CONSOLE_IS_IN_ENV

	/*
	* Partitions
	*/
	#define CONFIG_MAC_PARTITION
	#define CONFIG_DOS_PARTITION
	#define CONFIG_ISO_PARTITION

	/*
	* USB
	*/
	#ifdef CONFIG_BC3450_USB
	# define CONFIG_USB_OHCI
	# define CONFIG_USB_STORAGE
	#endif /* CONFIG_BC3450_USB */

	/*
	* POST support
	*/
	#define CONFIG_POST (CONFIG_SYS_POST_MEMORY \| \
	CONFIG_SYS_POST_CPU \| \
	CONFIG_SYS_POST_I2C)

	#ifdef CONFIG_POST
	/* preserve space for the post_word at end of on-chip SRAM */
	# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
	#endif /* CONFIG_POST */


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_ECHO
	#define CONFIG_CMD_EEPROM
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_JFFS2
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NFS
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_REGINFO
	#define CONFIG_CMD_SNTP
	#define CONFIG_CMD_BSP

	#ifdef CONFIG_VIDEO
	#define CONFIG_CMD_BMP
	#endif

	#ifdef CONFIG_BC3450_IDE
	#define CONFIG_CMD_IDE
	#endif

	#if defined(CONFIG_BC3450_IDE) \|\| defined(CONFIG_BC3450_USB)
	#ifdef CONFIG_FAT
	#define CONFIG_CMD_FAT
	#endif

	#ifdef CONFIG_EXT2
	#define CONFIG_CMD_EXT2
	#endif
	#endif

	#ifdef CONFIG_BC3450_USB
	#define CONFIG_CMD_USB
	#endif

	#ifdef CONFIG_PCI
	#define CONFIG_CMD_PCI
	#endif

	#ifdef CONFIG_POST
	#define CONFIG_CMD_DIAG
	#endif


	#define CONFIG_TIMESTAMP /* display image timestamps */

	#if (TEXT_BASE == 0xFC000000) /* Boot low */
	# define CONFIG_SYS_LOWBOOT 1
	#endif

	/*
	* Autobooting
	*/
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */

	#define CONFIG_PREBOOT "echo;" \
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo;"

	#undef CONFIG_BOOTARGS

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"ipaddr=192.168.1.10\0" \
	"serverip=192.168.1.3\0" \
	"netmask=255.255.255.0\0" \
	"hostname=bc3450\0" \
	"rootpath=/opt/eldk/ppc_6xx\0" \
	"kernel_addr=fc0a0000\0" \
	"ramdisk_addr=fc1c0000\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=$(serverip):$(rootpath)\0" \
	"ideargs=setenv bootargs root=/dev/hda2 ro\0" \
	"addip=setenv bootargs $(bootargs) " \
	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
	":$(hostname):$(netdev):off panic=1\0" \
	"addcons=setenv bootargs $(bootargs) " \
	"console=ttyS0,$(baudrate) console=tty0\0" \
	"flash_self=run ramargs addip addcons;" \
	"bootm $(kernel_addr) $(ramdisk_addr)\0" \
	"flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0" \
	"net_nfs=tftp 200000 $(bootfile); " \
	"run nfsargs addip addcons; bootm\0" \
	"ide_nfs=run nfsargs addip addcons; " \
	"disk 200000 0:1; bootm\0" \
	"ide_ide=run ideargs addip addcons; " \
	"disk 200000 0:1; bootm\0" \
	"usb_self=run usbload; run ramargs addip addcons; " \
	"bootm 200000 400000\0" \
	"usbload=usb reset; usb scan; usbboot 200000 0:1; " \
	"usbboot 400000 0:2\0" \
	"bootfile=uImage\0" \
	"load=tftp 200000 $(u-boot)\0" \
	"u-boot=u-boot.bin\0" \
	"update=protect off FC000000 FC05FFFF;" \
	"erase FC000000 FC05FFFF;" \
	"cp.b 200000 FC000000 $(filesize);" \
	"protect on FC000000 FC05FFFF\0" \
	""

	#define CONFIG_BOOTCOMMAND "run flash_self"

	/*
	* IPB Bus clocking configuration.
	*/
	#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */

	/*
	* PCI Bus clocking configuration
	*
	* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
	* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
	* of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
	*/
	#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
	# define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
	#endif

	/*
	* I2C configuration
	*/
	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 */

	/*
	* I2C clock frequency
	*
	* Please notice, that the resulting clock frequency could differ from the
	* configured value. This is because the I2C clock is derived from system
	* clock over a frequency divider with only a few divider values. U-boot
	* calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
	* approximation allways lies below the configured value, never above.
	*/
	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
	#define CONFIG_SYS_I2C_SLAVE 0x7F

	/*
	* EEPROM configuration for I²C EEPROM M24C32
	* M24C64 should work also. For other EEPROMs config should be verified.
	*
	* The TQM5200 module may hold an EEPROM at address 0x50.
	*/
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x (TQM) */
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70

	/*
	* RTC configuration
	*/
	#if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231)
	# define CONFIG_RTC_M41T11 1
	# define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#else
	# define CONFIG_RTC_MPC5200 1 /* use MPC5200 internal RTC */
	# define CONFIG_BOARD_EARLY_INIT_R
	#endif

	/*
	* Flash configuration
	*/
	#define CONFIG_SYS_FLASH_BASE TEXT_BASE /* 0xFC000000 */

	/* use CFI flash driver if no module variant is spezified */
	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
	#define CONFIG_SYS_FLASH_EMPTY_INFO
	#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */
	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
	#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */

	#if !defined(CONFIG_SYS_LOWBOOT)
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
	#else /* CONFIG_SYS_LOWBOOT */
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
	#endif /* CONFIG_SYS_LOWBOOT */
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
	(= chip selects) */
	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */

	/* Dynamic MTD partition support */
	#define CONFIG_CMD_MTDPARTS
	#define MTDIDS_DEFAULT "nor0=TQM5200-0"
	#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
	"1408k(kernel)," \
	"2m(initrd)," \
	"4m(small-fs)," \
	"16m(big-fs)," \
	"8m(misc)"

	/*
	* Environment settings
	*/
	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_SIZE 0x10000
	#define CONFIG_ENV_SECT_SIZE 0x20000
	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)

	/*
	* Memory map
	*/
	#define CONFIG_SYS_MBAR 0xF0000000
	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000

	/* Use ON-Chip SRAM until RAM will be available */
	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
	#ifdef CONFIG_POST
	/* preserve space for the post_word at end of on-chip SRAM */
	# define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
	#else
	# define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
	#endif /CONFIG_POST/

	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	# define CONFIG_SYS_RAMBOOT 1
	#endif

	#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*
	* Ethernet configuration
	*
	* Define CONFIG_MPC5xxx_MII10 to force FEC at 10MBIT
	*/
	#define CONFIG_MPC5xxx_FEC 1
	#define CONFIG_MPC5xxx_FEC_MII100
	#undef CONFIG_MPC5xxx_MII10
	#define CONFIG_PHY_ADDR 0x00

	/*
	* GPIO configuration on BC3450
	*
	* PSC1: UART1 (Service-UART) [0x xxxxxxx4]
	* PSC2: UART2 [0x xxxxxx4x]
	* or: AC/97 if CONFIG_BC3450_AC97 [0x xxxxxx2x]
	* PSC3: USB2 [0x xxxxx1xx]
	* USB: UART4(ext.)/UART5(int.) [0x xxxx2xxx]
	* (this has to match
	* CONFIG_USB_CONFIG which is
	* used by usb_ohci.c to set
	* the USB ports)
	* Eth: 10/100Mbit Ethernet [0x xxx0xxxx]
	* (this is reset to '5'
	* in FEC driver: fec.c)
	* PSC6: UART6 (int. to PS/2 contr.) [0x xx5xxxxx]
	* ATA/CS: ??? [0x x1xxxxxx]
	* FIXME! UM Fig 2-10 suggests [0x x0xxxxxx]
	* CS1: Use Pin gpio_wkup_6 as second
	* SDRAM chip select (mem_cs1)
	* Timer: CAN2 / SPI
	* I2C: CAN1 / I²C2 [0x bxxxxxxx]
	*/
	#ifdef CONFIG_BC3450_AC97
	# define CONFIG_SYS_GPS_PORT_CONFIG 0xb1502124
	#else /* PSC2=UART2 */
	# define CONFIG_SYS_GPS_PORT_CONFIG 0xb1502144
	#endif

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max no of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg. Buffer Size */

	#define CONFIG_SYS_ALT_MEMTEST /* Enable an alternative, */
	/* more extensive mem test */

	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

	#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */

	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
	#if defined(CONFIG_CMD_KGDB)
	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	/*
	* Enable loopw command.
	*/
	#define CONFIG_LOOPW

	/*
	* Various low-level settings
	*/
	#if defined(CONFIG_MPC5200)
	# define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
	# define CONFIG_SYS_HID0_FINAL HID0_ICE
	#else
	# define CONFIG_SYS_HID0_INIT 0
	# define CONFIG_SYS_HID0_FINAL 0
	#endif

	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
	# define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
	#else
	# define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
	#endif
	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE

	/* automatic configuration of chip selects */
	#ifdef CONFIG_TQM5200
	# define CONFIG_LAST_STAGE_INIT
	#endif /* CONFIG_TQM5200 */

	/*
	* SRAM - Do not map below 2 GB in address space, because this area is used
	* for SDRAM autosizing.
	*/
	#ifdef CONFIG_TQM5200
	# define CONFIG_SYS_CS2_START 0xE5000000
	# define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */
	# define CONFIG_SYS_CS2_CFG 0x0004D930
	#endif /* CONFIG_TQM5200 */

	/*
	* Grafic controller - Do not map below 2 GB in address space, because this
	* area is used for SDRAM autosizing.
	*/
	#ifdef CONFIG_TQM5200
	# define SM501_FB_BASE 0xE0000000
	# define CONFIG_SYS_CS1_START (SM501_FB_BASE)
	# define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */
	# define CONFIG_SYS_CS1_CFG 0x8F48FF70
	# define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000
	#endif /* CONFIG_TQM5200 */

	#define CONFIG_SYS_CS_BURST 0x00000000
	#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for */
	/* flash and SM501 */

	#define CONFIG_SYS_RESET_ADDRESS 0xff000000

	/*
	* USB stuff
	*/
	#define CONFIG_USB_CLOCK 0x0001BBBB
	#define CONFIG_USB_CONFIG 0x00002000 /* we're using Port 2 */

	/*
	* IDE/ATA stuff Supports IDE harddisk
	*/
	#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */

	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	#undef CONFIG_IDE_LED /* LED for ide not supported */

	#define CONFIG_IDE_RESET /* reset for ide supported */
	#define CONFIG_IDE_PREINIT

	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
	#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */

	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000

	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA

	/* Offset for data I/O */
	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)

	/* Offset for normal register accesses */
	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)

	/* Offset for alternate registers */
	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)

	/* Interval between registers */
	#define CONFIG_SYS_ATA_STRIDE 4

	#endif /* __CONFIG_H */