| /* |
| * (C) Copyright 2002 |
| * Rich Ireland, Enterasys Networks, rireland@enterasys.com. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| */ |
| |
| /* |
| * Configuration support for Xilinx Spartan3 devices. Based |
| * on spartan2.c (Rich Ireland, rireland@enterasys.com). |
| */ |
| |
| #include <common.h> /* core U-Boot definitions */ |
| #include <spartan3.h> /* Spartan-II device family */ |
| |
| /* Define FPGA_DEBUG to get debug printf's */ |
| #ifdef FPGA_DEBUG |
| #define PRINTF(fmt,args...) printf (fmt ,##args) |
| #else |
| #define PRINTF(fmt,args...) |
| #endif |
| |
| #undef CONFIG_SYS_FPGA_CHECK_BUSY |
| #undef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| |
| /* Note: The assumption is that we cannot possibly run fast enough to |
| * overrun the device (the Slave Parallel mode can free run at 50MHz). |
| * If there is a need to operate slower, define CONFIG_FPGA_DELAY in |
| * the board config file to slow things down. |
| */ |
| #ifndef CONFIG_FPGA_DELAY |
| #define CONFIG_FPGA_DELAY() |
| #endif |
| |
| #ifndef CONFIG_SYS_FPGA_WAIT |
| #define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ |
| #endif |
| |
| static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize); |
| static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize); |
| /* static int Spartan3_sp_info(Xilinx_desc *desc ); */ |
| |
| static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize); |
| static int Spartan3_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize); |
| /* static int Spartan3_ss_info(Xilinx_desc *desc); */ |
| |
| /* ------------------------------------------------------------------------- */ |
| /* Spartan-II Generic Implementation */ |
| int Spartan3_load(Xilinx_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| switch (desc->iface) { |
| case slave_serial: |
| PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__); |
| ret_val = Spartan3_ss_load (desc, buf, bsize); |
| break; |
| |
| case slave_parallel: |
| PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__); |
| ret_val = Spartan3_sp_load (desc, buf, bsize); |
| break; |
| |
| default: |
| printf ("%s: Unsupported interface type, %d\n", |
| __FUNCTION__, desc->iface); |
| } |
| |
| return ret_val; |
| } |
| |
| int Spartan3_dump(Xilinx_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| switch (desc->iface) { |
| case slave_serial: |
| PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__); |
| ret_val = Spartan3_ss_dump (desc, buf, bsize); |
| break; |
| |
| case slave_parallel: |
| PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__); |
| ret_val = Spartan3_sp_dump (desc, buf, bsize); |
| break; |
| |
| default: |
| printf ("%s: Unsupported interface type, %d\n", |
| __FUNCTION__, desc->iface); |
| } |
| |
| return ret_val; |
| } |
| |
| int Spartan3_info( Xilinx_desc *desc ) |
| { |
| return FPGA_SUCCESS; |
| } |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| /* Spartan-II Slave Parallel Generic Implementation */ |
| |
| static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; /* assume the worst */ |
| Xilinx_Spartan3_Slave_Parallel_fns *fn = desc->iface_fns; |
| |
| PRINTF ("%s: start with interface functions @ 0x%p\n", |
| __FUNCTION__, fn); |
| |
| if (fn) { |
| size_t bytecount = 0; |
| unsigned char *data = (unsigned char *) buf; |
| int cookie = desc->cookie; /* make a local copy */ |
| unsigned long ts; /* timestamp */ |
| |
| PRINTF ("%s: Function Table:\n" |
| "ptr:\t0x%p\n" |
| "struct: 0x%p\n" |
| "pre: 0x%p\n" |
| "pgm:\t0x%p\n" |
| "init:\t0x%p\n" |
| "err:\t0x%p\n" |
| "clk:\t0x%p\n" |
| "cs:\t0x%p\n" |
| "wr:\t0x%p\n" |
| "read data:\t0x%p\n" |
| "write data:\t0x%p\n" |
| "busy:\t0x%p\n" |
| "abort:\t0x%p\n", |
| "post:\t0x%p\n\n", |
| __FUNCTION__, &fn, fn, fn->pre, fn->pgm, fn->init, fn->err, |
| fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, fn->busy, |
| fn->abort, fn->post); |
| |
| /* |
| * This code is designed to emulate the "Express Style" |
| * Continuous Data Loading in Slave Parallel Mode for |
| * the Spartan-II Family. |
| */ |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| printf ("Loading FPGA Device %d...\n", cookie); |
| #endif |
| /* |
| * Run the pre configuration function if there is one. |
| */ |
| if (*fn->pre) { |
| (*fn->pre) (cookie); |
| } |
| |
| /* Establish the initial state */ |
| (*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */ |
| |
| /* Get ready for the burn */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */ |
| |
| ts = get_timer (0); /* get current time */ |
| /* Now wait for INIT and BUSY to go high */ |
| do { |
| CONFIG_FPGA_DELAY (); |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for INIT to clear.\n"); |
| (*fn->abort) (cookie); /* abort the burn */ |
| return FPGA_FAIL; |
| } |
| } while ((*fn->init) (cookie) && (*fn->busy) (cookie)); |
| |
| (*fn->wr) (TRUE, TRUE, cookie); /* Assert write, commit */ |
| (*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */ |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| /* Load the data */ |
| while (bytecount < bsize) { |
| /* XXX - do we check for an Ctrl-C press in here ??? */ |
| /* XXX - Check the error bit? */ |
| |
| (*fn->wdata) (data[bytecount++], TRUE, cookie); /* write the data */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| #ifdef CONFIG_SYS_FPGA_CHECK_BUSY |
| ts = get_timer (0); /* get current time */ |
| while ((*fn->busy) (cookie)) { |
| /* XXX - we should have a check in here somewhere to |
| * make sure we aren't busy forever... */ |
| |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for BUSY to clear.\n"); |
| (*fn->abort) (cookie); /* abort the burn */ |
| return FPGA_FAIL; |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (bytecount % (bsize / 40) == 0) |
| putc ('.'); /* let them know we are alive */ |
| #endif |
| } |
| |
| CONFIG_FPGA_DELAY (); |
| (*fn->cs) (FALSE, TRUE, cookie); /* Deassert the chip select */ |
| (*fn->wr) (FALSE, TRUE, cookie); /* Deassert the write pin */ |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| putc ('\n'); /* terminate the dotted line */ |
| #endif |
| |
| /* now check for done signal */ |
| ts = get_timer (0); /* get current time */ |
| ret_val = FPGA_SUCCESS; |
| while ((*fn->done) (cookie) == FPGA_FAIL) { |
| /* XXX - we should have a check in here somewhere to |
| * make sure we aren't busy forever... */ |
| |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for DONE to clear.\n"); |
| (*fn->abort) (cookie); /* abort the burn */ |
| ret_val = FPGA_FAIL; |
| break; |
| } |
| } |
| |
| /* |
| * Run the post configuration function if there is one. |
| */ |
| if (*fn->post) |
| (*fn->post) (cookie); |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (ret_val == FPGA_SUCCESS) |
| puts ("Done.\n"); |
| else |
| puts ("Fail.\n"); |
| #endif |
| |
| } else { |
| printf ("%s: NULL Interface function table!\n", __FUNCTION__); |
| } |
| |
| return ret_val; |
| } |
| |
| static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; /* assume the worst */ |
| Xilinx_Spartan3_Slave_Parallel_fns *fn = desc->iface_fns; |
| |
| if (fn) { |
| unsigned char *data = (unsigned char *) buf; |
| size_t bytecount = 0; |
| int cookie = desc->cookie; /* make a local copy */ |
| |
| printf ("Starting Dump of FPGA Device %d...\n", cookie); |
| |
| (*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */ |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| /* dump the data */ |
| while (bytecount < bsize) { |
| /* XXX - do we check for an Ctrl-C press in here ??? */ |
| |
| (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| (*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */ |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (bytecount % (bsize / 40) == 0) |
| putc ('.'); /* let them know we are alive */ |
| #endif |
| } |
| |
| (*fn->cs) (FALSE, FALSE, cookie); /* Deassert the chip select */ |
| (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| putc ('\n'); /* terminate the dotted line */ |
| #endif |
| puts ("Done.\n"); |
| |
| /* XXX - checksum the data? */ |
| } else { |
| printf ("%s: NULL Interface function table!\n", __FUNCTION__); |
| } |
| |
| return ret_val; |
| } |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; /* assume the worst */ |
| Xilinx_Spartan3_Slave_Serial_fns *fn = desc->iface_fns; |
| int i; |
| unsigned char val; |
| |
| PRINTF ("%s: start with interface functions @ 0x%p\n", |
| __FUNCTION__, fn); |
| |
| if (fn) { |
| size_t bytecount = 0; |
| unsigned char *data = (unsigned char *) buf; |
| int cookie = desc->cookie; /* make a local copy */ |
| unsigned long ts; /* timestamp */ |
| |
| PRINTF ("%s: Function Table:\n" |
| "ptr:\t0x%p\n" |
| "struct: 0x%p\n" |
| "pgm:\t0x%p\n" |
| "init:\t0x%p\n" |
| "clk:\t0x%p\n" |
| "wr:\t0x%p\n" |
| "done:\t0x%p\n\n", |
| __FUNCTION__, &fn, fn, fn->pgm, fn->init, |
| fn->clk, fn->wr, fn->done); |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| printf ("Loading FPGA Device %d...\n", cookie); |
| #endif |
| |
| /* |
| * Run the pre configuration function if there is one. |
| */ |
| if (*fn->pre) { |
| (*fn->pre) (cookie); |
| } |
| |
| /* Establish the initial state */ |
| (*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */ |
| |
| /* Wait for INIT state (init low) */ |
| ts = get_timer (0); /* get current time */ |
| do { |
| CONFIG_FPGA_DELAY (); |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for INIT to start.\n"); |
| if (*fn->abort) |
| (*fn->abort) (cookie); |
| return FPGA_FAIL; |
| } |
| } while (!(*fn->init) (cookie)); |
| |
| /* Get ready for the burn */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */ |
| |
| ts = get_timer (0); /* get current time */ |
| /* Now wait for INIT to go high */ |
| do { |
| CONFIG_FPGA_DELAY (); |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for INIT to clear.\n"); |
| if (*fn->abort) |
| (*fn->abort) (cookie); |
| return FPGA_FAIL; |
| } |
| } while ((*fn->init) (cookie)); |
| |
| /* Load the data */ |
| if(*fn->bwr) |
| (*fn->bwr) (data, bsize, TRUE, cookie); |
| else { |
| while (bytecount < bsize) { |
| |
| /* Xilinx detects an error if INIT goes low (active) |
| while DONE is low (inactive) */ |
| if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { |
| puts ("** CRC error during FPGA load.\n"); |
| if (*fn->abort) |
| (*fn->abort) (cookie); |
| return (FPGA_FAIL); |
| } |
| val = data [bytecount ++]; |
| i = 8; |
| do { |
| /* Deassert the clock */ |
| (*fn->clk) (FALSE, TRUE, cookie); |
| CONFIG_FPGA_DELAY (); |
| /* Write data */ |
| (*fn->wr) ((val & 0x80), TRUE, cookie); |
| CONFIG_FPGA_DELAY (); |
| /* Assert the clock */ |
| (*fn->clk) (TRUE, TRUE, cookie); |
| CONFIG_FPGA_DELAY (); |
| val <<= 1; |
| i --; |
| } while (i > 0); |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (bytecount % (bsize / 40) == 0) |
| putc ('.'); /* let them know we are alive */ |
| #endif |
| } |
| } |
| |
| CONFIG_FPGA_DELAY (); |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| putc ('\n'); /* terminate the dotted line */ |
| #endif |
| |
| /* now check for done signal */ |
| ts = get_timer (0); /* get current time */ |
| ret_val = FPGA_SUCCESS; |
| (*fn->wr) (TRUE, TRUE, cookie); |
| |
| while (! (*fn->done) (cookie)) { |
| /* XXX - we should have a check in here somewhere to |
| * make sure we aren't busy forever... */ |
| |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ |
| |
| putc ('*'); |
| |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for DONE to clear.\n"); |
| ret_val = FPGA_FAIL; |
| break; |
| } |
| } |
| putc ('\n'); /* terminate the dotted line */ |
| |
| /* |
| * Run the post configuration function if there is one. |
| */ |
| if (*fn->post) |
| (*fn->post) (cookie); |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (ret_val == FPGA_SUCCESS) |
| puts ("Done.\n"); |
| else |
| puts ("Fail.\n"); |
| #endif |
| |
| } else { |
| printf ("%s: NULL Interface function table!\n", __FUNCTION__); |
| } |
| |
| return ret_val; |
| } |
| |
| static int Spartan3_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) |
| { |
| /* Readback is only available through the Slave Parallel and */ |
| /* boundary-scan interfaces. */ |
| printf ("%s: Slave Serial Dumping is unavailable\n", |
| __FUNCTION__); |
| return FPGA_FAIL; |
| } |