| /* |
| * (C) Copyright 2004 |
| * IMMS, gGmbH <www.imms.de> |
| * Thomas Elste <info@elste.org> |
| * |
| * Configuation settings for ModNET50 board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ |
| #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ |
| #define CONFIG_NETARM /* it's a Netsiclicon NET+ARM */ |
| #undef CONFIG_NETARM_NET40_REV2 /* it's a Net+40 Rev. 2 */ |
| #undef CONFIG_NETARM_NET40_REV4 /* it's a Net+40 Rev. 4 */ |
| #define CONFIG_NETARM_NET50 /* it's a Net+50 */ |
| |
| #define CONFIG_MODNET50 1 /* on an ModNET50 Board */ |
| |
| #undef CONFIG_USE_IRQ /* don't need them anymore */ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_DRIVER_NETARMETH 1 |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_NETARM_SERIAL |
| #define CONFIG_SERIAL1 1 /* we use Serial line 1 */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 38400 |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_JFFS2 |
| |
| |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define CONFIG_IPADDR 192.168.30.2 |
| #define CONFIG_SERVERIP 192.168.30.122 |
| #define CONFIG_SYS_ETH_PHY_ADDR 0x100 |
| #define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */ |
| |
| /*#define CONFIG_BOOTDELAY 10*/ |
| /* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */ |
| #define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" |
| #define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K " \ |
| "root=/dev/ram keepinitrd" |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "modnet50 # " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x00500000 /* default load address */ |
| |
| #define CONFIG_SYS_HZ 900 /* decrementer freq: 2 kHz */ |
| |
| /* valid baudrates */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ |
| #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ |
| #define PHYS_SDRAM_2 0x01000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */ |
| |
| #define PHYS_FLASH_1 0x10000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip only, 16bit access) */ |
| |
| #define PHYS_FLASH_2 0x10200001 |
| #define PHYS_FLASH_2_SIZE 0x00200000 |
| |
| #define CONFIG_NETARM_EEPROM |
| /* #ifdef CONFIG_NETARM_EEPROM */ |
| #define PHYS_NVRAM_1 0x20000000 /* EEPROM Bank #1 */ |
| #define PHYS_NVRAM_SIZE 0x00002000 /* 8 KB */ |
| /* #endif */ |
| |
| #define PHYS_EXT_1 0x30000000 /* Extensions Bank #1 */ |
| #define PHYS_EXT_SIZE 0x01000000 /* 32 MB memory mapped I/O */ |
| |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ |
| #define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */ |
| |
| /* timeout values are in ticks */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ |
| |
| /* environment settings */ |
| #define CONFIG_ENV_IS_IN_FLASH |
| #undef CONFIG_ENV_IS_NOWHERE |
| |
| #define CONFIG_ENV_ADDR 0x1001C000 /* environment start address */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ |
| #define CONFIG_ENV_SIZE 0x4000 /* max size for environment */ |
| |
| /* |
| * JFFS2 partitions |
| * |
| */ |
| /* No command line, one static partition, whole device */ |
| #undef CONFIG_CMD_MTDPARTS |
| #define CONFIG_JFFS2_DEV "nor0" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00080000 |
| |
| /* mtdparts command line support */ |
| /* Note: fake mtd_id used, no linux mtd map file */ |
| /* |
| #define CONFIG_CMD_MTDPARTS |
| #define MTDIDS_DEFAULT "nor0=modnet50-0" |
| #define MTDPARTS_DEFAULT "mtdparts=modnet50-0:-@512k(jffs2)" |
| */ |
| |
| #endif /* __CONFIG_H */ |