include/configs/cpuat91.h - github/trini/u-boot - Gitiles

 /*
  * CPUAT91 by (C) Copyright 2006 Eric Benard
  * eric@eukrea.com
  *
  * Configuration settings for the CPUAT91 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #ifdef CONFIG_CPUAT91_RAM
 #define CONFIG_SKIP_LOWLEVEL_INIT	1
 #define CONFIG_SKIP_RELOCATE_UBOOT	1
 #define CONFIG_CPUAT91			1
 #else
 #define CONFIG_BOOTDELAY		1
 #endif

 #define AT91C_MAIN_CLOCK		179712000
 #define AT91C_MASTER_CLOCK		59904000

 #define AT91_SLOW_CLOCK			32768

 #define CONFIG_ARM920T			1
 #define CONFIG_AT91RM9200		1

 #undef CONFIG_USE_IRQ
 #define USE_920T_MMU			1

 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
 /* flash */
 #define CONFIG_SYS_MC_PUIA_VAL	0x00000000
 #define CONFIG_SYS_MC_PUP_VAL	0x00000000
 #define CONFIG_SYS_MC_PUER_VAL	0x00000000
 #define CONFIG_SYS_MC_ASR_VAL	0x00000000
 #define CONFIG_SYS_MC_AASR_VAL	0x00000000
 #define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
 #define CONFIG_SYS_SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */

 /* clocks */
 #define CONFIG_SYS_PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
 #define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz for USB */
 #define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock */

 /* sdram */
 #define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as D16/D31 */
 #define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
 #define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
 #define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
 #define CONFIG_SYS_SDRC_CR_VAL	0x2188C155 /* set up the SDRAM */
 #define CONFIG_SYS_SDRAM	0x20000000 /* address of the SDRAM */
 #define CONFIG_SYS_SDRAM1	0x20000080 /* address of the SDRAM */
 #define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to SDRAM */
 #define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
 #define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
 #define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

 /* define one of these to choose the DBGU, USART0 or USART1 as console */
 #define CONFIG_AT91RM9200_USART		1
 #define CONFIG_DBGU			1
 #undef CONFIG_USART0
 #undef CONFIG_USART1

 #define CONFIG_HARD_I2C			1

 #if defined(CONFIG_HARD_I2C)
 #define	CONFIG_SYS_I2C_SPEED			50000
 #define CONFIG_SYS_I2C_SLAVE			0
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	1
 #define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 #endif

 #define CONFIG_BOOTP_BOOTFILESIZE	1
 #define CONFIG_BOOTP_BOOTPATH		1
 #define CONFIG_BOOTP_GATEWAY		1
 #define CONFIG_BOOTP_HOSTNAME		1

 #include <config_cmd_default.h>

 #define CONFIG_CMD_DHCP			1
 #define CONFIG_CMD_PING			1
 #define CONFIG_CMD_MII			1
 #define CONFIG_CMD_CACHE		1
 #undef CONFIG_CMD_USB
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NFS

 #if defined(CONFIG_HARD_I2C)
 #define CONFIG_CMD_EEPROM		1
 #define CONFIG_CMD_I2C			1
 #endif

 #define CONFIG_NR_DRAM_BANKS			1
 #define PHYS_SDRAM				0x20000000
 #define PHYS_SDRAM_SIZE				0x02000000

 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END			\
 	(CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)

 #define CONFIG_DRIVER_ETHER			1
 #define CONFIG_NET_RETRY_COUNT			20
 #define CONFIG_AT91C_USE_RMII			1
 #define CONFIG_PHY_ADDRESS			(1 << 5)
 #define CONFIG_KS8721_PHY			1

 #define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER			1
 #define CONFIG_SYS_FLASH_EMPTY_INFO		1
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #define CONFIG_SYS_MAX_FLASH_BANKS		1
 #define CONFIG_SYS_FLASH_PROTECTION		1
 #define PHYS_FLASH_1				0x10000000
 #define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT		128

 #if defined(CONFIG_CMD_USB)
 #define CONFIG_USB_OHCI_NEW			1
 #define CONFIG_USB_STORAGE			1
 #define CONFIG_DOS_PARTITION			1
 #define CONFIG_AT91C_PQFP_UHPBU			1
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 #endif

 #define CONFIG_ENV_IS_IN_FLASH		1
 #define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x20000)
 #define CONFIG_ENV_SIZE			0x20000
 #define CONFIG_ENV_SECT_SIZE		0x20000

 #define CONFIG_SYS_LOAD_ADDR		0x21000000

 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }

 #define CONFIG_SYS_PROMPT		"CPUAT91=> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		32
 #define CONFIG_SYS_PBSIZE		\
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_CMDLINE_EDITING		1
 #define CONFIG_SYS_LONGHELP		1

 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_HZ_CLOCK		(AT91C_MASTER_CLOCK / 2)

 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 #define CONFIG_SYS_GBL_DATA_SIZE	128
 #define CONFIG_STACKSIZE		(32 * 1024)

 #if defined(CONFIG_USE_IRQ)
 #error CONFIG_USE_IRQ not supported
 #endif

 #define CONFIG_DEVICE_NULLDEV	 	1
 #define CONFIG_SILENT_CONSOLE		1

 #define CONFIG_AUTOBOOT_KEYED		1
 #define CONFIG_AUTOBOOT_PROMPT		\
 	"Press SPACE to abort autoboot\n"
 #define CONFIG_AUTOBOOT_STOP_STR	" "
 #define CONFIG_AUTOBOOT_DELAY_STR	"d"

 #define CONFIG_VERSION_VARIABLE		1

 #define MTDIDS_DEFAULT			"nor0=physmap-flash.0"
 #define MTDPARTS_DEFAULT		\
 	"mtdparts=physmap-flash.0:"	\
 		"128k(u-boot)ro,"	\
 		"128k(u-boot-env),"	\
 		"1408k(kernel),"	\
 		"-(rootfs)"

 #define CONFIG_BOOTARGS 		\
 	"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200"

 #define CONFIG_BOOTCOMMAND		"run flashboot"

 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"mtdid=" MTDIDS_DEFAULT "\0"					\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
 	"flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 "	\
 		"1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 "	\
 		"10000000 ${filesize}\0"				\
 	"flui=tftp 21000000 cpuat91/uImage; protect off 10040000 "	\
 		"1019ffff; erase 10040000 1019ffff; cp.b 21000000 "	\
 		"10040000 ${filesize}\0"				\
 	"flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off "	\
 		"101a0000 10ffffff; erase 101a0000 10ffffff; cp.b "	\
 		"21000000 101A0000 ${filesize}\0"			\
 	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"		\
 	"flashboot=run ramargs;bootm 10040000\0"			\
 	"netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;"		\
 		"bootm 21000000\0"
 #endif	/* __CONFIG_H */
	/*
	* CPUAT91 by (C) Copyright 2006 Eric Benard
	* eric@eukrea.com
	*
	* Configuration settings for the CPUAT91 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#ifdef CONFIG_CPUAT91_RAM
	#define CONFIG_SKIP_LOWLEVEL_INIT 1
	#define CONFIG_SKIP_RELOCATE_UBOOT 1
	#define CONFIG_CPUAT91 1
	#else
	#define CONFIG_BOOTDELAY 1
	#endif

	#define AT91C_MAIN_CLOCK 179712000
	#define AT91C_MASTER_CLOCK 59904000

	#define AT91_SLOW_CLOCK 32768

	#define CONFIG_ARM920T 1
	#define CONFIG_AT91RM9200 1

	#undef CONFIG_USE_IRQ
	#define USE_920T_MMU 1

	#define CONFIG_CMDLINE_TAG 1
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	#ifndef CONFIG_SKIP_LOWLEVEL_INIT
	#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
	/* flash */
	#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
	#define CONFIG_SYS_MC_PUP_VAL 0x00000000
	#define CONFIG_SYS_MC_PUER_VAL 0x00000000
	#define CONFIG_SYS_MC_ASR_VAL 0x00000000
	#define CONFIG_SYS_MC_AASR_VAL 0x00000000
	#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
	#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */

	/* clocks */
	#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
	#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */
	#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */

	/* sdram */
	#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */
	#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
	#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
	#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
	#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */
	#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */
	#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */
	#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */
	#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
	#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
	#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
	#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
	#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
	#endif /* CONFIG_SKIP_LOWLEVEL_INIT */

	/* define one of these to choose the DBGU, USART0 or USART1 as console */
	#define CONFIG_AT91RM9200_USART 1
	#define CONFIG_DBGU 1
	#undef CONFIG_USART0
	#undef CONFIG_USART1

	#define CONFIG_HARD_I2C 1

	#if defined(CONFIG_HARD_I2C)
	#define CONFIG_SYS_I2C_SPEED 50000
	#define CONFIG_SYS_I2C_SLAVE 0
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
	#endif

	#define CONFIG_BOOTP_BOOTFILESIZE 1
	#define CONFIG_BOOTP_BOOTPATH 1
	#define CONFIG_BOOTP_GATEWAY 1
	#define CONFIG_BOOTP_HOSTNAME 1

	#include <config_cmd_default.h>

	#define CONFIG_CMD_DHCP 1
	#define CONFIG_CMD_PING 1
	#define CONFIG_CMD_MII 1
	#define CONFIG_CMD_CACHE 1
	#undef CONFIG_CMD_USB
	#undef CONFIG_CMD_FPGA
	#undef CONFIG_CMD_IMI
	#undef CONFIG_CMD_LOADS
	#undef CONFIG_CMD_NFS

	#if defined(CONFIG_HARD_I2C)
	#define CONFIG_CMD_EEPROM 1
	#define CONFIG_CMD_I2C 1
	#endif

	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM 0x20000000
	#define PHYS_SDRAM_SIZE 0x02000000

	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	#define CONFIG_SYS_MEMTEST_END \
	(CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)

	#define CONFIG_DRIVER_ETHER 1
	#define CONFIG_NET_RETRY_COUNT 20
	#define CONFIG_AT91C_USE_RMII 1
	#define CONFIG_PHY_ADDRESS (1 << 5)
	#define CONFIG_KS8721_PHY 1

	#define CONFIG_SYS_FLASH_CFI 1
	#define CONFIG_FLASH_CFI_DRIVER 1
	#define CONFIG_SYS_FLASH_EMPTY_INFO 1
	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_FLASH_PROTECTION 1
	#define PHYS_FLASH_1 0x10000000
	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MAX_FLASH_SECT 128

	#if defined(CONFIG_CMD_USB)
	#define CONFIG_USB_OHCI_NEW 1
	#define CONFIG_USB_STORAGE 1
	#define CONFIG_DOS_PARTITION 1
	#define CONFIG_AT91C_PQFP_UHPBU 1
	#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
	#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
	#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
	#endif

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
	#define CONFIG_ENV_SIZE 0x20000
	#define CONFIG_ENV_SECT_SIZE 0x20000

	#define CONFIG_SYS_LOAD_ADDR 0x21000000

	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }

	#define CONFIG_SYS_PROMPT "CPUAT91=> "
	#define CONFIG_SYS_CBSIZE 256
	#define CONFIG_SYS_MAXARGS 32
	#define CONFIG_SYS_PBSIZE \
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_CMDLINE_EDITING 1
	#define CONFIG_SYS_LONGHELP 1

	#define CONFIG_SYS_HZ 1000
	#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)

	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
	#define CONFIG_SYS_GBL_DATA_SIZE 128
	#define CONFIG_STACKSIZE (32 * 1024)

	#if defined(CONFIG_USE_IRQ)
	#error CONFIG_USE_IRQ not supported
	#endif

	#define CONFIG_DEVICE_NULLDEV 1
	#define CONFIG_SILENT_CONSOLE 1

	#define CONFIG_AUTOBOOT_KEYED 1
	#define CONFIG_AUTOBOOT_PROMPT \
	"Press SPACE to abort autoboot\n"
	#define CONFIG_AUTOBOOT_STOP_STR " "
	#define CONFIG_AUTOBOOT_DELAY_STR "d"

	#define CONFIG_VERSION_VARIABLE 1

	#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
	#define MTDPARTS_DEFAULT \
	"mtdparts=physmap-flash.0:" \
	"128k(u-boot)ro," \
	"128k(u-boot-env)," \
	"1408k(kernel)," \
	"-(rootfs)"

	#define CONFIG_BOOTARGS \
	"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200"

	#define CONFIG_BOOTCOMMAND "run flashboot"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"mtdid=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \
	"1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \
	"10000000 ${filesize}\0" \
	"flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \
	"1019ffff; erase 10040000 1019ffff; cp.b 21000000 " \
	"10040000 ${filesize}\0" \
	"flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \
	"101a0000 10ffffff; erase 101a0000 10ffffff; cp.b " \
	"21000000 101A0000 ${filesize}\0" \
	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
	"flashboot=run ramargs;bootm 10040000\0" \
	"netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \
	"bootm 21000000\0"
	#endif /* __CONFIG_H */