| U-Boot for Freescale i.MX6 |
| |
| This file contains information for the port of U-Boot to the Freescale i.MX6 |
| SoC. |
| |
| 1. CONVENTIONS FOR FUSE ASSIGNMENTS |
| ----------------------------------- |
| |
| 1.1 MAC Address: It is stored in fuse bank 4, with the 32 lsbs in word 2 and the |
| 16 msbs in word 3. |
| |
| Example: |
| |
| For reading the MAC address fuses on a MX6Q: |
| |
| - The MAC address is stored in two fuse addresses (the fuse addresses are |
| described in the Fusemap Descriptions table from the mx6q Reference Manual): |
| |
| 0x620[31:0] - MAC_ADDR[31:0] |
| 0x630[15:0] - MAC_ADDR[47:32] |
| |
| In order to use the fuse API, we need to pass the bank and word values, which |
| are calculated as below: |
| |
| Fuse address for the lower MAC address: 0x620 |
| Base address for the fuses: 0x400 |
| |
| (0x620 - 0x400)/0x10 = 0x22 = 34 decimal |
| |
| As the fuses are arranged in banks of 8 words: |
| |
| 34 / 8 = 4 and the remainder is 2, so in this case: |
| |
| bank = 4 |
| word = 2 |
| |
| And the U-boot command would be: |
| |
| => fuse read 4 2 |
| Reading bank 4: |
| |
| Word 0x00000002: 9f027772 |
| |
| Doing the same for the upper MAC address: |
| |
| Fuse address for the upper MAC address: 0x630 |
| Base address for the fuses: 0x400 |
| |
| (0x630 - 0x400)/0x10 = 0x23 = 35 decimal |
| |
| As the fuses are arranged in banks of 8 words: |
| |
| 35 / 8 = 4 and the remainder is 3, so in this case: |
| |
| bank = 4 |
| word = 3 |
| |
| And the U-boot command would be: |
| |
| => fuse read 4 3 |
| Reading bank 4: |
| |
| Word 0x00000003: 00000004 |
| |
| ,which matches the ethaddr value: |
| => echo ${ethaddr} |
| 00:04:9f:02:77:72 |
| |
| Some other useful hints: |
| |
| - The 'bank' and 'word' numbers can be easily obtained from the mx6 Reference |
| Manual. For the mx6quad case, please check the "46.5 OCOTP Memory Map/Register |
| Definition" from the "i.MX 6Dual/6Quad Applications Processor Reference Manual, |
| Rev. 1, 04/2013" document. For example, for the MAC fuses we have: |
| |
| Address: |
| 21B_C620 Value of OTP Bank4 Word2 (MAC Address)(OCOTP_MAC0) |
| |
| 21B_C630 Value of OTP Bank4 Word3 (MAC Address)(OCOTP_MAC1) |
| |
| - The command '=> fuse read 4 2 2' reads the whole MAC addresses at once: |
| |
| => fuse read 4 2 2 |
| Reading bank 4: |
| |
| Word 0x00000002: 9f027772 00000004 |