| /* |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * (C) Copyright 2002 |
| * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> |
| * |
| * (C) Copyright 2003 |
| * Texas Instruments, <www.ti.com> |
| * Kshitij Gupta <Kshitij@ti.com> |
| * |
| * (C) Copyright 2004 |
| * Texas Instruments, <www.ti.com> |
| * Rishi Bhattacharya <rishi@ti.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #if defined(CONFIG_OMAP1610) |
| #include <./configs/omap1510.h> |
| #endif |
| |
| void flash__init (void); |
| void ether__init (void); |
| void set_muxconf_regs (void); |
| void peripheral_power_enable (void); |
| |
| #define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) |
| |
| static inline void delay (unsigned long loops) |
| { |
| __asm__ volatile ("1:\n" |
| "subs %0, %1, #1\n" |
| "bne 1b":"=r" (loops):"0" (loops)); |
| } |
| |
| /* |
| * Miscellaneous platform dependent initialisations |
| */ |
| |
| int board_init (void) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* arch number of OMAP 1510-Board */ |
| /* to be changed for OMAP 1610 Board */ |
| gd->bd->bi_arch_number = 234; |
| |
| /* adress of boot parameters */ |
| gd->bd->bi_boot_params = 0x10000100; |
| |
| /* Configure MUX settings */ |
| set_muxconf_regs (); |
| peripheral_power_enable (); |
| |
| /* this speeds up your boot a quite a bit. However to make it |
| * work, you need make sure your kernel startup flush bug is fixed. |
| * ... rkw ... |
| */ |
| icache_enable (); |
| |
| flash__init (); |
| ether__init (); |
| return 0; |
| } |
| |
| |
| int misc_init_r (void) |
| { |
| /* currently empty */ |
| return (0); |
| } |
| |
| /****************************** |
| Routine: |
| Description: |
| ******************************/ |
| void flash__init (void) |
| { |
| #define EMIFS_GlB_Config_REG 0xfffecc0c |
| unsigned int regval; |
| regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); |
| /* Turn off write protection for flash devices. */ |
| regval = regval | 0x0001; |
| *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; |
| } |
| /************************************************************* |
| Routine:ether__init |
| Description: take the Ethernet controller out of reset and wait |
| for the EEPROM load to complete. |
| *************************************************************/ |
| void ether__init (void) |
| { |
| #define ETH_CONTROL_REG 0x0480000b |
| int i; |
| |
| *((volatile unsigned short *) 0xfffece08) = 0x03FF; |
| *((volatile unsigned short *) 0xfffb3824) = 0x8000; |
| *((volatile unsigned short *) 0xfffb3830) = 0x0000; |
| *((volatile unsigned short *) 0xfffb3834) = 0x0009; |
| *((volatile unsigned short *) 0xfffb3838) = 0x0009; |
| *((volatile unsigned short *) 0xfffb3818) = 0x0002; |
| *((volatile unsigned short *) 0xfffb382C) = 0x0048; |
| *((volatile unsigned short *) 0xfffb3824) = 0x8603; |
| udelay (3); |
| for (i=0;i<2000;i++); |
| *((volatile unsigned short *) 0xfffb381C) = 0x6610; |
| udelay (30); |
| for (i=0;i<10000;i++); |
| |
| *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; |
| udelay (3); |
| |
| |
| } |
| |
| /****************************** |
| Routine: |
| Description: |
| ******************************/ |
| int dram_init (void) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| gd->bd->bi_dram[0].start = PHYS_SDRAM_1; |
| gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; |
| |
| return 0; |
| } |
| |
| /****************************************************** |
| Routine: set_muxconf_regs |
| Description: Setting up the configuration Mux registers |
| specific to the hardware |
| *******************************************************/ |
| void set_muxconf_regs (void) |
| { |
| volatile unsigned int *MuxConfReg; |
| /* set each registers to its reset value; */ |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0); |
| /* setup for UART1 */ |
| *MuxConfReg &= ~(0x02000000); /* bit 25 */ |
| /* setup for UART2 */ |
| *MuxConfReg &= ~(0x01000000); /* bit 24 */ |
| /* Disable Uwire CS Hi-Z */ |
| *MuxConfReg |= 0x08000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6); |
| /*setup mux for UART3 */ |
| *MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */ |
| *MuxConfReg &= ~0x0000003e; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8); |
| /* Disable Uwire CS Hi-Z */ |
| *MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */ |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9); |
| /* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */ |
| /* hardware will actually use TX and RTS based on bit 25 in */ |
| /* FUNC_MUX_CTRL_0. I told you this thing was screwy! */ |
| *MuxConfReg |= 0x00201000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C); |
| /* setup for UART2 */ |
| /* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */ |
| /* hardware will actually use TX and RTS based on bit 24 in */ |
| /* FUNC_MUX_CTRL_0. */ |
| *MuxConfReg |= 0x09000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D); |
| *MuxConfReg |= 0x00000020; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1); |
| *MuxConfReg = 0x00000000; |
| /* mux setup for SD/MMC driver */ |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2); |
| *MuxConfReg &= 0xFFFE0FFF; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); |
| /* bit 13 for MMC2 XOR_CLK */ |
| *MuxConfReg &= ~(0x00002000); |
| /* bit 29 for UART 1 */ |
| *MuxConfReg &= ~(0x00002000); |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0); |
| /* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */ |
| *MuxConfReg |= 0x000C0000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL); |
| *MuxConfReg &= ~(0x00000070); |
| *MuxConfReg &= ~(0x00000008); |
| *MuxConfReg |= 0x00000003; |
| *MuxConfReg |= 0x00000180; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); |
| /* bit 17, software controls VBUS */ |
| *MuxConfReg &= ~(0x00020000); |
| /* Enable USB 48 and 12M clocks */ |
| *MuxConfReg |= 0x00000200; |
| *MuxConfReg &= ~(0x00000180); |
| /*2.75V for MMCSDIO1 */ |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0); |
| *MuxConfReg = 0x00001FE7; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PU_PD_SEL_0); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PU_PD_SEL_1); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PU_PD_SEL_3); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PU_PD_SEL_4); |
| *MuxConfReg = 0x00000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4); |
| *MuxConfReg = 0x00000000; |
| /* Turn on UART2 48 MHZ clock */ |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); |
| *MuxConfReg |= 0x40000000; |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) USB_OTG_CTRL); |
| /* setup for USB VBus detection OMAP161x */ |
| *MuxConfReg |= 0x00040000; /* bit 18 */ |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2); |
| /* PullUps for SD/MMC driver */ |
| *MuxConfReg |= ~(0xFFFE0FFF); |
| MuxConfReg = |
| (volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0); |
| *MuxConfReg = COMP_MODE_ENABLE; |
| } |
| |
| /****************************************************** |
| Routine: peripheral_power_enable |
| Description: Enable the power for UART1 |
| *******************************************************/ |
| void peripheral_power_enable (void) |
| { |
| #define UART1_48MHZ_ENABLE ((unsigned short)0x0200) |
| #define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834) |
| |
| *SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE; |
| } |