| /* |
| * ppmc7xx.c |
| * --------- |
| * |
| * Main board-specific routines for Wind River PPMC 7xx/74xx board. |
| * |
| * By Richard Danter (richard.danter@windriver.com) |
| * Copyright (C) 2005 Wind River Systems |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| |
| |
| /* Define some MPC107 (memory controller) registers */ |
| #define MPC107_EUMB_GCR 0xfce41020 |
| #define MPC107_EUMB_IACKR 0xfce600a0 |
| |
| |
| /* Function prototypes */ |
| extern void unlock_ram_in_cache( void ); |
| extern void _start_warm(void); |
| |
| |
| /* |
| * initdram() |
| * |
| * This function normally initialises the (S)DRAM of the system. For this board |
| * the SDRAM was already initialised by board_asm_init (see init.S) so we just |
| * return the size of RAM. |
| */ |
| long initdram( int board_type ) |
| { |
| return CFG_SDRAM_SIZE; |
| } |
| |
| |
| /* |
| * after_reloc() |
| * |
| * This is called after U-Boot has been copied from Flash/ROM to RAM. It gives |
| * us an opportunity to do some additional setup before the rest of the system |
| * is initialised. We don't need to do anything, so we just call board_init_r() |
| * which should never return. |
| */ |
| void after_reloc( ulong dest_addr, gd_t* gd ) |
| { |
| /* Jump to the main U-Boot board init code */ |
| board_init_r( gd, dest_addr ); |
| } |
| |
| |
| /* |
| * checkboard() |
| * |
| * We could do some board level checks here, such as working out what version |
| * it is, but for this board we simply display it's name (on the console). |
| */ |
| int checkboard( void ) |
| { |
| puts( "Board: Wind River PPMC 7xx/74xx\n" ); |
| return 0; |
| } |
| |
| |
| /* |
| * misc_init_r |
| * |
| * Used for other setup which needs to be done late in the bring-up phase. |
| */ |
| int misc_init_r( void ) |
| { |
| /* Reset the EPIC and clear pending interrupts */ |
| out32r(MPC107_EUMB_GCR, 0xa0000000); |
| while( in32r( MPC107_EUMB_GCR ) & 0x80000000 ); |
| out32r( MPC107_EUMB_GCR, 0x20000000 ); |
| while( in32r( MPC107_EUMB_IACKR ) != 0xff ); |
| |
| /* Enable the I-Cache */ |
| icache_enable(); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * do_reset() |
| * |
| * Shell command to reset the board. |
| */ |
| void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) |
| { |
| printf( "Resetting...\n" ); |
| |
| /* Disabe and invalidate cache */ |
| icache_disable(); |
| dcache_disable(); |
| |
| /* Jump to warm start (in RAM) */ |
| _start_warm(); |
| |
| /* Should never get here */ |
| while(1); |
| } |