| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * From Coreboot northbridge/intel/sandybridge/northbridge.c |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * Copyright (C) 2011 The Chromium Authors |
| */ |
| |
| #include <dm.h> |
| #include <log.h> |
| #include <asm/global_data.h> |
| #include <asm/msr.h> |
| #include <asm/cpu.h> |
| #include <asm/intel_regs.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| #include <asm/processor.h> |
| #include <asm/arch/pch.h> |
| #include <asm/arch/model_206ax.h> |
| #include <asm/arch/sandybridge.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int bridge_silicon_revision(struct udevice *dev) |
| { |
| struct cpuid_result result; |
| u16 bridge_id; |
| u8 stepping; |
| |
| result = cpuid(1); |
| stepping = result.eax & 0xf; |
| dm_pci_read_config16(dev, PCI_DEVICE_ID, &bridge_id); |
| bridge_id &= 0xf0; |
| return bridge_id | stepping; |
| } |
| |
| static int get_pcie_bar(struct udevice *dev, u32 *base, u32 *len) |
| { |
| u32 pciexbar_reg; |
| |
| *base = 0; |
| *len = 0; |
| |
| dm_pci_read_config32(dev, PCIEXBAR, &pciexbar_reg); |
| |
| if (!(pciexbar_reg & (1 << 0))) |
| return 0; |
| |
| switch ((pciexbar_reg >> 1) & 3) { |
| case 0: /* 256MB */ |
| *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | |
| (1 << 28)); |
| *len = 256 * 1024 * 1024; |
| return 1; |
| case 1: /* 128M */ |
| *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | |
| (1 << 28) | (1 << 27)); |
| *len = 128 * 1024 * 1024; |
| return 1; |
| case 2: /* 64M */ |
| *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | |
| (1 << 28) | (1 << 27) | (1 << 26)); |
| *len = 64 * 1024 * 1024; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void add_fixed_resources(struct udevice *dev, int index) |
| { |
| u32 pcie_config_base, pcie_config_size; |
| |
| if (get_pcie_bar(dev, &pcie_config_base, &pcie_config_size)) { |
| debug("Adding PCIe config bar base=0x%08x size=0x%x\n", |
| pcie_config_base, pcie_config_size); |
| } |
| } |
| |
| static void northbridge_dmi_init(struct udevice *dev, int rev) |
| { |
| /* Clear error status bits */ |
| writel(0xffffffff, DMIBAR_REG(0x1c4)); |
| writel(0xffffffff, DMIBAR_REG(0x1d0)); |
| |
| /* Steps prior to DMI ASPM */ |
| if ((rev & BASE_REV_MASK) == BASE_REV_SNB) { |
| clrsetbits_le32(DMIBAR_REG(0x250), (1 << 22) | (1 << 20), |
| 1 << 21); |
| } |
| |
| setbits_le32(DMIBAR_REG(0x238), 1 << 29); |
| |
| if (rev >= SNB_STEP_D0) { |
| setbits_le32(DMIBAR_REG(0x1f8), 1 << 16); |
| } else if (rev >= SNB_STEP_D1) { |
| clrsetbits_le32(DMIBAR_REG(0x1f8), 1 << 26, 1 << 16); |
| setbits_le32(DMIBAR_REG(0x1fc), (1 << 12) | (1 << 23)); |
| } |
| |
| /* Enable ASPM on SNB link, should happen before PCH link */ |
| if ((rev & BASE_REV_MASK) == BASE_REV_SNB) |
| setbits_le32(DMIBAR_REG(0xd04), 1 << 4); |
| |
| setbits_le32(DMIBAR_REG(0x88), (1 << 1) | (1 << 0)); |
| } |
| |
| static void northbridge_init(struct udevice *dev, int rev) |
| { |
| u32 bridge_type; |
| |
| add_fixed_resources(dev, 6); |
| northbridge_dmi_init(dev, rev); |
| |
| bridge_type = readl(MCHBAR_REG(0x5f10)); |
| bridge_type &= ~0xff; |
| |
| if ((rev & BASE_REV_MASK) == BASE_REV_IVB) { |
| /* Enable Power Aware Interrupt Routing - fixed priority */ |
| clrsetbits_8(MCHBAR_REG(0x5418), 0xf, 0x4); |
| |
| /* 30h for IvyBridge */ |
| bridge_type |= 0x30; |
| } else { |
| /* 20h for Sandybridge */ |
| bridge_type |= 0x20; |
| } |
| writel(bridge_type, MCHBAR_REG(0x5f10)); |
| |
| /* |
| * Set bit 0 of BIOS_RESET_CPL to indicate to the CPU |
| * that BIOS has initialized memory and power management |
| */ |
| setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 1); |
| debug("Set BIOS_RESET_CPL\n"); |
| |
| /* Configure turbo power limits 1ms after reset complete bit */ |
| mdelay(1); |
| set_power_limits(28); |
| |
| /* |
| * CPUs with configurable TDP also need power limits set |
| * in MCHBAR. Use same values from MSR_PKG_POWER_LIMIT. |
| */ |
| if (cpu_ivybridge_config_tdp_levels()) { |
| msr_t msr = msr_read(MSR_PKG_POWER_LIMIT); |
| |
| writel(msr.lo, MCHBAR_REG(0x59A0)); |
| writel(msr.hi, MCHBAR_REG(0x59A4)); |
| } |
| |
| /* Set here before graphics PM init */ |
| writel(0x00100001, MCHBAR_REG(0x5500)); |
| } |
| |
| static void sandybridge_setup_northbridge_bars(struct udevice *dev) |
| { |
| /* Set up all hardcoded northbridge BARs */ |
| debug("Setting up static registers\n"); |
| dm_pci_write_config32(dev, EPBAR, DEFAULT_EPBAR | 1); |
| dm_pci_write_config32(dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32); |
| dm_pci_write_config32(dev, MCHBAR, MCH_BASE_ADDRESS | 1); |
| dm_pci_write_config32(dev, MCHBAR + 4, (0LL + MCH_BASE_ADDRESS) >> 32); |
| /* 64MB - busses 0-63 */ |
| dm_pci_write_config32(dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5); |
| dm_pci_write_config32(dev, PCIEXBAR + 4, |
| (0LL + DEFAULT_PCIEXBAR) >> 32); |
| dm_pci_write_config32(dev, DMIBAR, DEFAULT_DMIBAR | 1); |
| dm_pci_write_config32(dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32); |
| |
| /* Set C0000-FFFFF to access RAM on both reads and writes */ |
| dm_pci_write_config8(dev, PAM0, 0x30); |
| dm_pci_write_config8(dev, PAM1, 0x33); |
| dm_pci_write_config8(dev, PAM2, 0x33); |
| dm_pci_write_config8(dev, PAM3, 0x33); |
| dm_pci_write_config8(dev, PAM4, 0x33); |
| dm_pci_write_config8(dev, PAM5, 0x33); |
| dm_pci_write_config8(dev, PAM6, 0x33); |
| } |
| |
| /** |
| * sandybridge_init_iommu() - Set up IOMMU so that azalia can be used |
| * |
| * It is not obvious where these values come from. They may be undocumented. |
| */ |
| static void sandybridge_init_iommu(struct udevice *dev) |
| { |
| u32 capid0_a; |
| |
| dm_pci_read_config32(dev, 0xe4, &capid0_a); |
| if (capid0_a & (1 << 23)) { |
| log_debug("capid0_a not needed\n"); |
| return; |
| } |
| |
| /* setup BARs */ |
| writel(IOMMU_BASE1 >> 32, MCHBAR_REG(0x5404)); |
| writel(IOMMU_BASE1 | 1, MCHBAR_REG(0x5400)); |
| writel(IOMMU_BASE2 >> 32, MCHBAR_REG(0x5414)); |
| writel(IOMMU_BASE2 | 1, MCHBAR_REG(0x5410)); |
| |
| /* lock policies */ |
| writel(0x80000000, IOMMU_BASE1 + 0xff0); |
| |
| /* Enable azalia sound */ |
| writel(0x20000000, IOMMU_BASE2 + 0xff0); |
| writel(0xa0000000, IOMMU_BASE2 + 0xff0); |
| } |
| |
| static int bd82x6x_northbridge_early_init(struct udevice *dev) |
| { |
| const int chipset_type = SANDYBRIDGE_MOBILE; |
| u32 capid0_a; |
| u8 reg8; |
| |
| /* Device ID Override Enable should be done very early */ |
| dm_pci_read_config32(dev, 0xe4, &capid0_a); |
| if (capid0_a & (1 << 10)) { |
| dm_pci_read_config8(dev, 0xf3, ®8); |
| reg8 &= ~7; /* Clear 2:0 */ |
| |
| if (chipset_type == SANDYBRIDGE_MOBILE) |
| reg8 |= 1; /* Set bit 0 */ |
| |
| dm_pci_write_config8(dev, 0xf3, reg8); |
| } |
| |
| sandybridge_setup_northbridge_bars(dev); |
| |
| /* Setup IOMMU BARs */ |
| sandybridge_init_iommu(dev); |
| |
| /* Device Enable */ |
| dm_pci_write_config32(dev, DEVEN, DEVEN_HOST | DEVEN_IGD); |
| |
| return 0; |
| } |
| |
| static int bd82x6x_northbridge_probe(struct udevice *dev) |
| { |
| int rev; |
| |
| if (!(gd->flags & GD_FLG_RELOC)) |
| return bd82x6x_northbridge_early_init(dev); |
| |
| rev = bridge_silicon_revision(dev); |
| northbridge_init(dev, rev); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id bd82x6x_northbridge_ids[] = { |
| { .compatible = "intel,bd82x6x-northbridge" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(bd82x6x_northbridge_drv) = { |
| .name = "bd82x6x_northbridge", |
| .id = UCLASS_NORTHBRIDGE, |
| .of_match = bd82x6x_northbridge_ids, |
| .probe = bd82x6x_northbridge_probe, |
| }; |