| /* |
| * U-Boot - blackfin_local.h |
| * |
| * Copyright (c) 2005-2007 Analog Devices Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __BLACKFIN_LOCAL_H__ |
| #define __BLACKFIN_LOCAL_H__ |
| |
| #include <asm/mem_map.h> |
| |
| #define LO(con32) ((con32) & 0xFFFF) |
| #define lo(con32) ((con32) & 0xFFFF) |
| #define HI(con32) (((con32) >> 16) & 0xFFFF) |
| #define hi(con32) (((con32) >> 16) & 0xFFFF) |
| |
| #define OFFSET_(x) (x & 0x0000FFFF) |
| #define MK_BMSK_(x) (1 << x) |
| |
| /* Ideally this should be USEC not MSEC, but the USEC multiplication |
| * likes to overflow 32bit quantities which is all our assembler |
| * currently supports ;( |
| */ |
| #define USEC_PER_MSEC 1000 |
| #define MSEC_PER_SEC 1000 |
| #define BFIN_SCLK (100000000) |
| #define SCLK_TO_MSEC(sclk) ((MSEC_PER_SEC * ((sclk) / USEC_PER_MSEC)) / (BFIN_SCLK / USEC_PER_MSEC)) |
| #define MSEC_TO_SCLK(msec) ((((BFIN_SCLK / USEC_PER_MSEC) * (msec)) / MSEC_PER_SEC) * USEC_PER_MSEC) |
| |
| #define L1_CACHE_SHIFT 5 |
| #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) |
| |
| #include <linux/linkage.h> |
| #include <asm/cache.h> |
| |
| #ifndef __ASSEMBLY__ |
| # ifdef SHARED_RESOURCES |
| # include <asm/shared_resources.h> |
| # endif |
| |
| # include <linux/types.h> |
| |
| # define bfin_revid() (bfin_read_CHIPID() >> 28) |
| |
| extern int bfin_os_log_check(void); |
| extern void bfin_os_log_dump(void); |
| |
| extern void blackfin_icache_flush_range(const void *, const void *); |
| extern void blackfin_dcache_flush_range(const void *, const void *); |
| extern void blackfin_icache_dcache_flush_range(const void *, const void *); |
| extern void blackfin_dcache_flush_invalidate_range(const void *, const void *); |
| |
| /* Use DMA to move data from on chip to external memory. The L1 instruction |
| * regions can only be accessed via DMA, so if the address in question is in |
| * that region, make sure we attempt to DMA indirectly. |
| */ |
| # ifdef __ADSPBF561__ |
| /* Core B regions all need dma from Core A */ |
| # define addr_bfin_on_chip_mem(addr) \ |
| ((((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000) || \ |
| (((unsigned long)(addr) & 0xFFC00000) == 0xFF400000)) |
| # else |
| # define addr_bfin_on_chip_mem(addr) \ |
| (((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000) |
| # endif |
| |
| # include <asm/system.h> |
| |
| #if ANOMALY_05000198 |
| # define NOP_PAD_ANOMALY_05000198 "nop;" |
| #else |
| # define NOP_PAD_ANOMALY_05000198 |
| #endif |
| |
| #define BFIN_BUG() while (1) asm volatile("emuexcpt;"); |
| |
| #define _bfin_readX(addr, size, asm_size, asm_ext) ({ \ |
| u32 __v; \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| "%0 = " #asm_size "[%1]" #asm_ext ";" \ |
| : "=d" (__v) \ |
| : "a" (addr) \ |
| ); \ |
| __v; }) |
| #define _bfin_writeX(addr, val, size, asm_size) \ |
| __asm__ __volatile__( \ |
| NOP_PAD_ANOMALY_05000198 \ |
| #asm_size "[%0] = %1;" \ |
| : \ |
| : "a" (addr), "d" ((u##size)(val)) \ |
| : "memory" \ |
| ) |
| |
| #define bfin_read8(addr) _bfin_readX(addr, 8, b, (z)) |
| #define bfin_read16(addr) _bfin_readX(addr, 16, w, (z)) |
| #define bfin_read32(addr) _bfin_readX(addr, 32, , ) |
| #define bfin_write8(addr, val) _bfin_writeX(addr, val, 8, b) |
| #define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w) |
| #define bfin_write32(addr, val) _bfin_writeX(addr, val, 32, ) |
| |
| #define bfin_read(addr) \ |
| ({ \ |
| sizeof(*(addr)) == 1 ? bfin_read8(addr) : \ |
| sizeof(*(addr)) == 2 ? bfin_read16(addr) : \ |
| sizeof(*(addr)) == 4 ? bfin_read32(addr) : \ |
| ({ BFIN_BUG(); 0; }); \ |
| }) |
| #define bfin_write(addr, val) \ |
| do { \ |
| switch (sizeof(*(addr))) { \ |
| case 1: bfin_write8(addr, val); break; \ |
| case 2: bfin_write16(addr, val); break; \ |
| case 4: bfin_write32(addr, val); break; \ |
| default: \ |
| BFIN_BUG(); \ |
| } \ |
| } while (0) |
| |
| #define bfin_write_or(addr, bits) \ |
| do { \ |
| typeof(addr) __addr = (addr); \ |
| bfin_write(__addr, bfin_read(__addr) | (bits)); \ |
| } while (0) |
| |
| #define bfin_write_and(addr, bits) \ |
| do { \ |
| typeof(addr) __addr = (addr); \ |
| bfin_write(__addr, bfin_read(__addr) & (bits)); \ |
| } while (0) |
| |
| #define bfin_readPTR(addr) bfin_read32(addr) |
| #define bfin_writePTR(addr, val) bfin_write32(addr, val) |
| |
| /* SSYNC implementation for C file */ |
| static inline void SSYNC(void) |
| { |
| int _tmp; |
| if (ANOMALY_05000312) |
| __asm__ __volatile__( |
| "cli %0;" |
| "nop;" |
| "nop;" |
| "ssync;" |
| "sti %0;" |
| : "=d" (_tmp) |
| ); |
| else if (ANOMALY_05000244) |
| __asm__ __volatile__( |
| "nop;" |
| "nop;" |
| "nop;" |
| "ssync;" |
| ); |
| else |
| __asm__ __volatile__("ssync;"); |
| } |
| |
| /* CSYNC implementation for C file */ |
| static inline void CSYNC(void) |
| { |
| int _tmp; |
| if (ANOMALY_05000312) |
| __asm__ __volatile__( |
| "cli %0;" |
| "nop;" |
| "nop;" |
| "csync;" |
| "sti %0;" |
| : "=d" (_tmp) |
| ); |
| else if (ANOMALY_05000244) |
| __asm__ __volatile__( |
| "nop;" |
| "nop;" |
| "nop;" |
| "csync;" |
| ); |
| else |
| __asm__ __volatile__("csync;"); |
| } |
| |
| #else /* __ASSEMBLY__ */ |
| |
| /* SSYNC & CSYNC implementations for assembly files */ |
| |
| #define ssync(x) SSYNC(x) |
| #define csync(x) CSYNC(x) |
| |
| #if ANOMALY_05000312 |
| #define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; |
| #define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; |
| |
| #elif ANOMALY_05000244 |
| #define SSYNC(scratch) nop; nop; nop; SSYNC; |
| #define CSYNC(scratch) nop; nop; nop; CSYNC; |
| |
| #else |
| #define SSYNC(scratch) SSYNC; |
| #define CSYNC(scratch) CSYNC; |
| |
| #endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */ |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif |