blob: c27908821a1423f12b55bf838aaafa3fd41e7bc4 [file] [log] [blame]
/*
* Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* Tegra2 high-level function multiplexing */
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
int funcmux_select(enum periph_id id, int config)
{
int bad_config = config != FUNCMUX_DEFAULT;
switch (id) {
case PERIPH_ID_UART1:
switch (config) {
case FUNCMUX_UART1_IRRX_IRTX:
pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
pinmux_tristate_disable(PINGRP_IRRX);
pinmux_tristate_disable(PINGRP_IRTX);
break;
case FUNCMUX_UART1_UAA_UAB:
pinmux_set_func(PINGRP_UAA, PMUX_FUNC_UARTA);
pinmux_set_func(PINGRP_UAB, PMUX_FUNC_UARTA);
pinmux_tristate_disable(PINGRP_UAA);
pinmux_tristate_disable(PINGRP_UAB);
bad_config = 0;
break;
case FUNCMUX_UART1_GPU:
pinmux_set_func(PINGRP_GPU, PMUX_FUNC_UARTA);
pinmux_tristate_disable(PINGRP_GPU);
bad_config = 0;
break;
}
if (!bad_config) {
/*
* Tegra appears to boot with function UARTA pre-
* selected on mux group SDB. If two mux groups are
* both set to the same function, it's unclear which
* group's pins drive the RX signals into the HW.
* For UARTA, SDB certainly overrides group IRTX in
* practice. To solve this, configure some alternative
* function on SDB to avoid the conflict. Also, tri-
* state the group to avoid driving any signal onto it
* until we know what's connected.
*/
pinmux_tristate_enable(PINGRP_SDB);
pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
}
break;
case PERIPH_ID_UART2:
if (config == FUNCMUX_UART2_IRDA) {
pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
pinmux_tristate_disable(PINGRP_UAD);
}
break;
case PERIPH_ID_UART4:
if (config == FUNCMUX_UART4_GMC) {
pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
pinmux_tristate_disable(PINGRP_GMC);
}
break;
case PERIPH_ID_DVC_I2C:
/* there is only one selection, pinmux_config is ignored */
if (config == FUNCMUX_DVC_I2CP) {
pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C);
pinmux_tristate_disable(PINGRP_I2CP);
}
break;
case PERIPH_ID_I2C1:
/* support pinmux_config of 0 for now, */
if (config == FUNCMUX_I2C1_RM) {
pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C);
pinmux_tristate_disable(PINGRP_RM);
}
break;
case PERIPH_ID_I2C2: /* I2C2 */
switch (config) {
case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */
pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2);
/* PTA to HDMI */
pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI);
pinmux_tristate_disable(PINGRP_DDC);
break;
case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */
pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2);
/* set DDC_SEL to RSVDx (RSVD2 works for now) */
pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2);
pinmux_tristate_disable(PINGRP_PTA);
bad_config = 0;
break;
}
break;
case PERIPH_ID_I2C3: /* I2C3 */
/* support pinmux_config of 0 for now */
if (config == FUNCMUX_I2C3_DTF) {
pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3);
pinmux_tristate_disable(PINGRP_DTF);
}
break;
case PERIPH_ID_SDMMC2:
if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
pinmux_tristate_disable(PINGRP_DTA);
pinmux_tristate_disable(PINGRP_DTD);
}
break;
case PERIPH_ID_SDMMC3:
switch (config) {
case FUNCMUX_SDMMC3_SDB_SLXA_8BIT:
pinmux_set_func(PINGRP_SLXA, PMUX_FUNC_SDIO3);
pinmux_set_func(PINGRP_SLXC, PMUX_FUNC_SDIO3);
pinmux_set_func(PINGRP_SLXD, PMUX_FUNC_SDIO3);
pinmux_set_func(PINGRP_SLXK, PMUX_FUNC_SDIO3);
pinmux_tristate_disable(PINGRP_SLXA);
pinmux_tristate_disable(PINGRP_SLXC);
pinmux_tristate_disable(PINGRP_SLXD);
pinmux_tristate_disable(PINGRP_SLXK);
/* fall through */
case FUNCMUX_SDMMC3_SDB_4BIT:
pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
pinmux_tristate_disable(PINGRP_SDB);
pinmux_tristate_disable(PINGRP_SDC);
pinmux_tristate_disable(PINGRP_SDD);
bad_config = 0;
break;
}
break;
case PERIPH_ID_SDMMC4:
switch (config) {
case FUNCMUX_SDMMC4_ATC_ATD_8BIT:
pinmux_set_func(PINGRP_ATC, PMUX_FUNC_SDIO4);
pinmux_set_func(PINGRP_ATD, PMUX_FUNC_SDIO4);
pinmux_tristate_disable(PINGRP_ATC);
pinmux_tristate_disable(PINGRP_ATD);
break;
case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT:
pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
pinmux_tristate_disable(PINGRP_GME);
/* fall through */
case FUNCMUX_SDMMC4_ATB_GMA_4_BIT:
pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
pinmux_tristate_disable(PINGRP_ATB);
pinmux_tristate_disable(PINGRP_GMA);
bad_config = 0;
break;
}
break;
case PERIPH_ID_KBC:
if (config == FUNCMUX_DEFAULT) {
enum pmux_pingrp grp[] = {PINGRP_KBCA, PINGRP_KBCB,
PINGRP_KBCC, PINGRP_KBCD, PINGRP_KBCE,
PINGRP_KBCF};
int i;
for (i = 0; i < ARRAY_SIZE(grp); i++) {
pinmux_tristate_disable(grp[i]);
pinmux_set_func(grp[i], PMUX_FUNC_KBC);
pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
}
break;
}
default:
debug("%s: invalid periph_id %d", __func__, id);
return -1;
}
if (bad_config) {
debug("%s: invalid config %d for periph_id %d", __func__,
config, id);
return -1;
}
return 0;
}