| /* |
| * eSPI controller driver. |
| * |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * Author: Mingkai Hu (Mingkai.hu@freescale.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #include <malloc.h> |
| #include <spi.h> |
| #include <asm/immap_85xx.h> |
| |
| struct fsl_spi_slave { |
| struct spi_slave slave; |
| unsigned int div16; |
| unsigned int pm; |
| unsigned int mode; |
| size_t cmd_len; |
| u8 cmd_buf[16]; |
| size_t data_len; |
| unsigned int max_transfer_length; |
| }; |
| |
| #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) |
| |
| #define ESPI_MAX_CS_NUM 4 |
| |
| #define ESPI_EV_RNE (1 << 9) |
| #define ESPI_EV_TNF (1 << 8) |
| |
| #define ESPI_MODE_EN (1 << 31) /* Enable interface */ |
| #define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ |
| #define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */ |
| |
| #define ESPI_COM_CS(x) ((x) << 30) |
| #define ESPI_COM_TRANLEN(x) ((x) << 0) |
| |
| #define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31) |
| #define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30) |
| #define ESPI_CSMODE_REV_MSB_FIRST (1 << 29) |
| #define ESPI_CSMODE_DIV16 (1 << 28) |
| #define ESPI_CSMODE_PM(x) ((x) << 24) |
| #define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20) |
| #define ESPI_CSMODE_LEN(x) ((x) << 16) |
| #define ESPI_CSMODE_CSBEF(x) ((x) << 12) |
| #define ESPI_CSMODE_CSAFT(x) ((x) << 8) |
| #define ESPI_CSMODE_CSCG(x) ((x) << 3) |
| |
| #define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \ |
| ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \ |
| ESPI_CSMODE_CSCG(1)) |
| |
| #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 |
| |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int mode) |
| { |
| struct fsl_spi_slave *fsl; |
| sys_info_t sysinfo; |
| unsigned long spibrg = 0; |
| unsigned char pm = 0; |
| |
| if (!spi_cs_is_valid(bus, cs)) |
| return NULL; |
| |
| fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); |
| if (!fsl) |
| return NULL; |
| |
| fsl->mode = mode; |
| fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; |
| |
| /* Set eSPI BRG clock source */ |
| get_sys_info(&sysinfo); |
| spibrg = sysinfo.freqSystemBus / 2; |
| fsl->div16 = 0; |
| if ((spibrg / max_hz) > 32) { |
| fsl->div16 = ESPI_CSMODE_DIV16; |
| pm = spibrg / (max_hz * 16 * 2); |
| if (pm > 16) { |
| pm = 16; |
| debug("Requested speed is too low: %d Hz, %ld Hz " |
| "is used.\n", max_hz, spibrg / (32 * 16)); |
| } |
| } else |
| pm = spibrg / (max_hz * 2); |
| if (pm) |
| pm--; |
| fsl->pm = pm; |
| |
| return &fsl->slave; |
| } |
| |
| void spi_free_slave(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| free(fsl); |
| } |
| |
| void spi_init(void) |
| { |
| |
| } |
| |
| int spi_claim_bus(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| unsigned char pm = fsl->pm; |
| unsigned int cs = slave->cs; |
| unsigned int mode = fsl->mode; |
| unsigned int div16 = fsl->div16; |
| int i; |
| |
| debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); |
| |
| /* Enable eSPI interface */ |
| out_be32(&espi->mode, ESPI_MODE_RXTHR(3) |
| | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); |
| |
| out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ |
| out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ |
| |
| /* Init CS mode interface */ |
| for (i = 0; i < ESPI_MAX_CS_NUM; i++) |
| out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); |
| |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & |
| ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 |
| | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK |
| | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); |
| |
| /* Set eSPI BRG clock source */ |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_PM(pm) | div16); |
| |
| /* Set eSPI mode */ |
| if (mode & SPI_CPHA) |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_CP_BEGIN_EDGCLK); |
| if (mode & SPI_CPOL) |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_CI_INACTIVEHIGH); |
| |
| /* Character bit order: msb first */ |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_REV_MSB_FIRST); |
| |
| /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_LEN(7)); |
| |
| return 0; |
| } |
| |
| void spi_release_bus(struct spi_slave *slave) |
| { |
| |
| } |
| |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, |
| void *data_in, unsigned long flags) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| unsigned int tmpdout, tmpdin, event; |
| const void *dout = NULL; |
| void *din = NULL; |
| int len = 0; |
| int num_blks, num_chunks, max_tran_len, tran_len; |
| int num_bytes; |
| unsigned char *ch; |
| unsigned char *buffer = NULL; |
| size_t buf_len; |
| u8 *cmd_buf = fsl->cmd_buf; |
| size_t cmd_len = fsl->cmd_len; |
| size_t data_len = bitlen / 8; |
| size_t rx_offset = 0; |
| |
| max_tran_len = fsl->max_transfer_length; |
| switch (flags) { |
| case SPI_XFER_BEGIN: |
| cmd_len = fsl->cmd_len = data_len; |
| memcpy(cmd_buf, data_out, cmd_len); |
| return 0; |
| case 0: |
| case SPI_XFER_END: |
| if (bitlen == 0) { |
| spi_cs_deactivate(slave); |
| return 0; |
| } |
| buf_len = 2 * cmd_len + min(data_len, max_tran_len); |
| len = cmd_len + data_len; |
| rx_offset = cmd_len; |
| buffer = (unsigned char *)malloc(buf_len); |
| if (!buffer) { |
| debug("SF: Failed to malloc memory.\n"); |
| return 1; |
| } |
| memcpy(buffer, cmd_buf, cmd_len); |
| if (data_in == NULL) |
| memcpy(buffer + cmd_len, data_out, data_len); |
| break; |
| case SPI_XFER_BEGIN | SPI_XFER_END: |
| len = data_len; |
| buffer = (unsigned char *)malloc(len * 2); |
| if (!buffer) { |
| debug("SF: Failed to malloc memory.\n"); |
| return 1; |
| } |
| memcpy(buffer, data_out, len); |
| rx_offset = len; |
| cmd_len = 0; |
| break; |
| } |
| |
| debug("spi_xfer: slave %u:%u dout %08X(%p) din %08X(%p) len %u\n", |
| slave->bus, slave->cs, *(uint *) dout, |
| dout, *(uint *) din, din, len); |
| |
| num_chunks = data_len / max_tran_len + |
| (data_len % max_tran_len ? 1 : 0); |
| while (num_chunks--) { |
| if (data_in) |
| din = buffer + rx_offset; |
| dout = buffer; |
| tran_len = min(data_len , max_tran_len); |
| num_blks = (tran_len + cmd_len) / 4 + |
| ((tran_len + cmd_len) % 4 ? 1 : 0); |
| num_bytes = (tran_len + cmd_len) % 4; |
| fsl->data_len = tran_len + cmd_len; |
| spi_cs_activate(slave); |
| |
| /* Clear all eSPI events */ |
| out_be32(&espi->event , 0xffffffff); |
| /* handle data in 32-bit chunks */ |
| while (num_blks--) { |
| |
| event = in_be32(&espi->event); |
| if (event & ESPI_EV_TNF) { |
| tmpdout = *(u32 *)dout; |
| |
| /* Set up the next iteration */ |
| if (len > 4) { |
| len -= 4; |
| dout += 4; |
| } |
| |
| out_be32(&espi->tx, tmpdout); |
| out_be32(&espi->event, ESPI_EV_TNF); |
| debug("***spi_xfer:...%08x written\n", tmpdout); |
| } |
| |
| /* Wait for eSPI transmit to get out */ |
| udelay(80); |
| |
| event = in_be32(&espi->event); |
| if (event & ESPI_EV_RNE) { |
| tmpdin = in_be32(&espi->rx); |
| if (num_blks == 0 && num_bytes != 0) { |
| ch = (unsigned char *)&tmpdin; |
| while (num_bytes--) |
| *(unsigned char *)din++ = *ch++; |
| } else { |
| *(u32 *) din = tmpdin; |
| din += 4; |
| } |
| |
| out_be32(&espi->event, in_be32(&espi->event) |
| | ESPI_EV_RNE); |
| debug("***spi_xfer:...%08x readed\n", tmpdin); |
| } |
| } |
| if (data_in) { |
| memcpy(data_in, buffer + 2 * cmd_len, tran_len); |
| if (*buffer == 0x0b) { |
| data_in += tran_len; |
| data_len -= tran_len; |
| *(int *)buffer += tran_len; |
| } |
| } |
| spi_cs_deactivate(slave); |
| } |
| |
| free(buffer); |
| return 0; |
| } |
| |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| { |
| return bus == 0 && cs < ESPI_MAX_CS_NUM; |
| } |
| |
| void spi_cs_activate(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| unsigned int com = 0; |
| size_t data_len = fsl->data_len; |
| |
| com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); |
| com |= ESPI_COM_CS(slave->cs); |
| com |= ESPI_COM_TRANLEN(data_len - 1); |
| out_be32(&espi->com, com); |
| } |
| |
| void spi_cs_deactivate(struct spi_slave *slave) |
| { |
| ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| |
| /* clear the RXCNT and TXCNT */ |
| out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); |
| out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); |
| } |