drivers/pci/pci_auto.c - github/trini/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * PCI autoconfiguration library
  *
  * Author: Matt Porter <mporter@mvista.com>
  *
  * Copyright 2000 MontaVista Software Inc.
  * Copyright (c) 2021  Maciej W. Rozycki <macro@orcam.me.uk>
  */

 #include <config.h>
 #include <dm.h>
 #include <errno.h>
 #include <log.h>
 #include <pci.h>
 #include <time.h>
 #include "pci_internal.h"

 /* the user can define CFG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
 #ifndef CFG_SYS_PCI_CACHE_LINE_SIZE
 #define CFG_SYS_PCI_CACHE_LINE_SIZE	8
 #endif

 static void dm_pciauto_setup_device(struct udevice *dev,
 				    struct pci_region *mem,
 				    struct pci_region *prefetch,
 				    struct pci_region *io)
 {
 	u32 bar_response;
 	pci_size_t bar_size;
 	u16 cmdstat = 0;
 	int bar, bar_nr = 0;
 	int bars_num;
 	u8 header_type;
 	int rom_addr;
 	pci_addr_t bar_value;
 	struct pci_region *bar_res = NULL;
 	int found_mem64 = 0;
 	u16 class;

 	dm_pci_read_config16(dev, PCI_COMMAND, &cmdstat);
 	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) |
 			PCI_COMMAND_MASTER;

 	dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type);
 	header_type &= 0x7f;

 	switch (header_type) {
 	case PCI_HEADER_TYPE_NORMAL:
 		bars_num = 6;
 		break;
 	case PCI_HEADER_TYPE_BRIDGE:
 		bars_num = 2;
 		break;
 	case PCI_HEADER_TYPE_CARDBUS:
 		/* CardBus header does not have any BAR */
 		bars_num = 0;
 		break;
 	default:
 		/* Skip configuring BARs for unknown header types */
 		bars_num = 0;
 		break;
 	}

 	for (bar = PCI_BASE_ADDRESS_0;
 	     bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
 		int ret = 0;

 		/* Tickle the BAR and get the response */
 		dm_pci_write_config32(dev, bar, 0xffffffff);
 		dm_pci_read_config32(dev, bar, &bar_response);

 		/* If BAR is not implemented (or invalid) go to the next BAR */
 		if (!bar_response || bar_response == 0xffffffff)
 			continue;

 		found_mem64 = 0;

 		/* Check the BAR type and set our address mask */
 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
 			bar_size = bar_response & PCI_BASE_ADDRESS_IO_MASK;
 			bar_size &= ~(bar_size - 1);

 			bar_res = io;

 			debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
 			      bar_nr, (unsigned long long)bar_size);
 		} else {
 			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
 			     PCI_BASE_ADDRESS_MEM_TYPE_64) {
 				u32 bar_response_upper;
 				u64 bar64;

 				dm_pci_write_config32(dev, bar + 4, 0xffffffff);
 				dm_pci_read_config32(dev, bar + 4,
 						     &bar_response_upper);

 				bar64 = ((u64)bar_response_upper << 32) |
 						bar_response;

 				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK)
 						+ 1;
 				found_mem64 = 1;
 			} else {
 				bar_size = (u32)(~(bar_response &
 						PCI_BASE_ADDRESS_MEM_MASK) + 1);
 			}

 			if (prefetch &&
 			    (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
 				bar_res = prefetch;
 			else
 				bar_res = mem;

 			debug("PCI Autoconfig: BAR %d, %s%s, size=0x%llx, ",
 			      bar_nr, bar_res == prefetch ? "Prf" : "Mem",
 			      found_mem64 ? "64" : "",
 			      (unsigned long long)bar_size);
 		}

 		ret = pciauto_region_allocate(bar_res, bar_size,
 					      &bar_value, found_mem64);
 		if (ret)
 			printf("PCI: Failed autoconfig bar %x\n", bar);

 		if (!ret) {
 			/* Write it out and update our limit */
 			dm_pci_write_config32(dev, bar, (u32)bar_value);

 			if (found_mem64) {
 				bar += 4;
 #ifdef CONFIG_SYS_PCI_64BIT
 				dm_pci_write_config32(dev, bar,
 						      (u32)(bar_value >> 32));
 #else
 				/*
 				 * If we are a 64-bit decoder then increment to
 				 * the upper 32 bits of the bar and force it to
 				 * locate in the lower 4GB of memory.
 				 */
 				dm_pci_write_config32(dev, bar, 0x00000000);
 #endif
 			}
 		}

 		cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
 			PCI_COMMAND_IO : PCI_COMMAND_MEMORY;

 		debug("\n");

 		bar_nr++;
 	}

 	/* Configure the expansion ROM address */
 	if (header_type == PCI_HEADER_TYPE_NORMAL ||
 	    header_type == PCI_HEADER_TYPE_BRIDGE) {
 		rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
 			PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
 		dm_pci_write_config32(dev, rom_addr, 0xfffffffe);
 		dm_pci_read_config32(dev, rom_addr, &bar_response);
 		if (bar_response) {
 			bar_size = -(bar_response & ~1);
 			debug("PCI Autoconfig: ROM, size=%#x, ",
 			      (unsigned int)bar_size);
 			if (pciauto_region_allocate(mem, bar_size, &bar_value,
 						    false) == 0) {
 				dm_pci_write_config32(dev, rom_addr, bar_value);
 			}
 			cmdstat |= PCI_COMMAND_MEMORY;
 			debug("\n");
 		}
 	}

 	/* PCI_COMMAND_IO must be set for VGA device */
 	dm_pci_read_config16(dev, PCI_CLASS_DEVICE, &class);
 	if (class == PCI_CLASS_DISPLAY_VGA)
 		cmdstat |= PCI_COMMAND_IO;

 	dm_pci_write_config16(dev, PCI_COMMAND, cmdstat);
 	dm_pci_write_config8(dev, PCI_CACHE_LINE_SIZE,
 			     CFG_SYS_PCI_CACHE_LINE_SIZE);
 	dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x80);
 }

 /*
  * Check if the link of a downstream PCIe port operates correctly.
  *
  * For that check if the optional Data Link Layer Link Active status gets
  * on within a 200ms period or failing that wait until the completion of
  * that period and check if link training has shown the completed status
  * continuously throughout the second half of that period.
  *
  * Observation with the ASMedia ASM2824 Gen 3 switch indicates it takes
  * 11-44ms to indicate the Data Link Layer Link Active status at 2.5GT/s,
  * though it may take a couple of link training iterations.
  */
 static bool dm_pciauto_exp_link_stable(struct udevice *dev, int pcie_off)
 {
 	u64 loops = 0, trcount = 0, ntrcount = 0, flips = 0;
 	bool dllla, lnktr, plnktr;
 	u16 exp_lnksta;
 	pci_dev_t bdf;
 	u64 end;

 	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKSTA, &exp_lnksta);
 	plnktr = !!(exp_lnksta & PCI_EXP_LNKSTA_LT);

 	end = get_ticks() + usec_to_tick(200000);
 	do {
 		dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKSTA,
 				     &exp_lnksta);
 		dllla = !!(exp_lnksta & PCI_EXP_LNKSTA_DLLLA);
 		lnktr = !!(exp_lnksta & PCI_EXP_LNKSTA_LT);

 		flips += plnktr ^ lnktr;
 		if (lnktr) {
 			ntrcount = 0;
 			trcount++;
 		} else {
 			ntrcount++;
 		}
 		loops++;

 		plnktr = lnktr;
 	} while (!dllla && get_ticks() < end);

 	bdf = dm_pci_get_bdf(dev);
 	debug("PCI Autoconfig: %02x.%02x.%02x: Fixup link: DL active: %u; "
 	      "%3llu flips, %6llu loops of which %6llu while training, "
 	      "final %6llu stable\n",
 	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf),
 	      (unsigned int)dllla,
 	      (unsigned long long)flips, (unsigned long long)loops,
 	      (unsigned long long)trcount, (unsigned long long)ntrcount);

 	return dllla || ntrcount >= loops / 2;
 }

 /*
  * Retrain the link of a downstream PCIe port by hand if necessary.
  *
  * This is needed at least where a downstream port of the ASMedia ASM2824
  * Gen 3 switch is wired to the upstream port of the Pericom PI7C9X2G304
  * Gen 2 switch, and observed with the Delock Riser Card PCI Express x1 >
  * 2 x PCIe x1 device, P/N 41433, plugged into the SiFive HiFive Unmatched
  * board.
  *
  * In such a configuration the switches are supposed to negotiate the link
  * speed of preferably 5.0GT/s, falling back to 2.5GT/s.  However the link
  * continues switching between the two speeds indefinitely and the data
  * link layer never reaches the active state, with link training reported
  * repeatedly active ~84% of the time.  Forcing the target link speed to
  * 2.5GT/s with the upstream ASM2824 device makes the two switches talk to
  * each other correctly however.  And more interestingly retraining with a
  * higher target link speed afterwards lets the two successfully negotiate
  * 5.0GT/s.
  *
  * As this can potentially happen with any device and is cheap in the case
  * of correctly operating hardware, let's do it for all downstream ports,
  * for root complexes, PCIe switches and PCI/PCI-X to PCIe bridges.
  *
  * First check if automatic link training may have failed to complete, as
  * indicated by the optional Data Link Layer Link Active status being off
  * and the Link Bandwidth Management Status indicating that hardware has
  * changed the link speed or width in an attempt to correct unreliable
  * link operation.  If this is the case, then check if the link operates
  * correctly by seeing whether it is being trained excessively.  If it is,
  * then conclude the link is broken.
  *
  * In that case restrict the speed to 2.5GT/s, observing that the Target
  * Link Speed field is sticky and therefore the link will stay restricted
  * even after a device reset is later made by an OS that is unaware of the
  * problem.  With the speed restricted request that the link be retrained
  * and check again if the link operates correctly.  If not, then set the
  * Target Link Speed back to the original value.
  *
  * This requires the presence of the Link Control 2 register, so make sure
  * the PCI Express Capability Version is at least 2.  Also don't try, for
  * obvious reasons, to limit the speed if 2.5GT/s is the only link speed
  * supported.
  */
 static void dm_pciauto_exp_fixup_link(struct udevice *dev, int pcie_off)
 {
 	u16 exp_lnksta, exp_lnkctl, exp_lnkctl2;
 	u16 exp_flags, exp_type, exp_version;
 	u32 exp_lnkcap;
 	pci_dev_t bdf;

 	dm_pci_read_config16(dev, pcie_off + PCI_EXP_FLAGS, &exp_flags);
 	exp_version = exp_flags & PCI_EXP_FLAGS_VERS;
 	if (exp_version < 2)
 		return;

 	exp_type = (exp_flags & PCI_EXP_FLAGS_TYPE) >> 4;
 	switch (exp_type) {
 	case PCI_EXP_TYPE_ROOT_PORT:
 	case PCI_EXP_TYPE_DOWNSTREAM:
 	case PCI_EXP_TYPE_PCIE_BRIDGE:
 		break;
 	default:
 		return;
 	}

 	dm_pci_read_config32(dev, pcie_off + PCI_EXP_LNKCAP, &exp_lnkcap);
 	if ((exp_lnkcap & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
 		return;

 	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKSTA, &exp_lnksta);
 	if ((exp_lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) !=
 	    PCI_EXP_LNKSTA_LBMS)
 		return;

 	if (dm_pciauto_exp_link_stable(dev, pcie_off))
 		return;

 	bdf = dm_pci_get_bdf(dev);
 	printf("PCI Autoconfig: %02x.%02x.%02x: "
 	       "Downstream link non-functional\n",
 	       PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
 	printf("PCI Autoconfig: %02x.%02x.%02x: "
 	       "Retrying with speed restricted to 2.5GT/s...\n",
 	       PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));

 	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKCTL, &exp_lnkctl);
 	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKCTL2, &exp_lnkctl2);

 	dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL2,
 			      (exp_lnkctl2 & ~PCI_EXP_LNKCTL2_TLS) |
 			      PCI_EXP_LNKCTL2_TLS_2_5GT);
 	dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL,
 			      exp_lnkctl | PCI_EXP_LNKCTL_RL);

 	if (dm_pciauto_exp_link_stable(dev, pcie_off)) {
 		printf("PCI Autoconfig: %02x.%02x.%02x: Succeeded!\n",
 		       PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
 	} else {
 		printf("PCI Autoconfig: %02x.%02x.%02x: Failed!\n",
 		       PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));

 		dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL2,
 				      exp_lnkctl2);
 		dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL,
 				      exp_lnkctl | PCI_EXP_LNKCTL_RL);
 	}
 }

 void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus)
 {
 	struct pci_region *pci_mem;
 	struct pci_region *pci_prefetch;
 	struct pci_region *pci_io;
 	u16 cmdstat, prefechable_64;
 	u8 io_32;
 	struct udevice *ctlr = pci_get_controller(dev);
 	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
 	int pcie_off;

 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
 	pci_io = ctlr_hose->pci_io;

 	dm_pci_read_config16(dev, PCI_COMMAND, &cmdstat);
 	dm_pci_read_config16(dev, PCI_PREF_MEMORY_BASE, &prefechable_64);
 	prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
 	dm_pci_read_config8(dev, PCI_IO_BASE, &io_32);
 	io_32 &= PCI_IO_RANGE_TYPE_MASK;

 	/* Configure bus number registers */
 	dm_pci_write_config8(dev, PCI_PRIMARY_BUS,
 			     PCI_BUS(dm_pci_get_bdf(dev)) - dev_seq(ctlr));
 	dm_pci_write_config8(dev, PCI_SECONDARY_BUS, sub_bus - dev_seq(ctlr));
 	dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, 0xff);

 	if (pci_mem) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_mem, 0x100000);

 		/*
 		 * Set up memory and I/O filter limits, assume 32-bit
 		 * I/O space
 		 */
 		dm_pci_write_config16(dev, PCI_MEMORY_BASE,
 				      ((pci_mem->bus_lower & 0xfff00000) >> 16) &
 				      PCI_MEMORY_RANGE_MASK);

 		cmdstat |= PCI_COMMAND_MEMORY;
 	}

 	if (pci_prefetch) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_prefetch, 0x100000);

 		/*
 		 * Set up memory and I/O filter limits, assume 32-bit
 		 * I/O space
 		 */
 		dm_pci_write_config16(dev, PCI_PREF_MEMORY_BASE,
 				(((pci_prefetch->bus_lower & 0xfff00000) >> 16) &
 				PCI_PREF_RANGE_MASK) | prefechable_64);
 		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
 #ifdef CONFIG_SYS_PCI_64BIT
 			dm_pci_write_config32(dev, PCI_PREF_BASE_UPPER32,
 					      pci_prefetch->bus_lower >> 32);
 #else
 			dm_pci_write_config32(dev, PCI_PREF_BASE_UPPER32, 0x0);
 #endif

 		cmdstat |= PCI_COMMAND_MEMORY;
 	} else {
 		/* We don't support prefetchable memory for now, so disable */
 		dm_pci_write_config16(dev, PCI_PREF_MEMORY_BASE, 0xfff0 |
 								prefechable_64);
 		dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, 0x0 |
 								prefechable_64);
 		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
 			dm_pci_write_config16(dev, PCI_PREF_BASE_UPPER32, 0x0);
 			dm_pci_write_config16(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
 		}
 	}

 	if (pci_io) {
 		/* Round I/O allocator to 4KB boundary */
 		pciauto_region_align(pci_io, 0x1000);

 		dm_pci_write_config8(dev, PCI_IO_BASE,
 				     (((pci_io->bus_lower & 0x0000f000) >> 8) &
 				     PCI_IO_RANGE_MASK) | io_32);
 		if (io_32 == PCI_IO_RANGE_TYPE_32)
 			dm_pci_write_config16(dev, PCI_IO_BASE_UPPER16,
 				      (pci_io->bus_lower & 0xffff0000) >> 16);

 		cmdstat |= PCI_COMMAND_IO;
 	} else {
 		/* Disable I/O if unsupported */
 		dm_pci_write_config8(dev, PCI_IO_BASE, 0xf0 | io_32);
 		dm_pci_write_config8(dev, PCI_IO_LIMIT, 0x0 | io_32);
 		if (io_32 == PCI_IO_RANGE_TYPE_32) {
 			dm_pci_write_config16(dev, PCI_IO_BASE_UPPER16, 0x0);
 			dm_pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, 0x0);
 		}
 	}

 	/* For PCIe devices see if we need to retrain the link by hand */
 	pcie_off = dm_pci_find_capability(dev, PCI_CAP_ID_EXP);
 	if (pcie_off)
 		dm_pciauto_exp_fixup_link(dev, pcie_off);

 	/* Enable memory and I/O accesses, enable bus master */
 	dm_pci_write_config16(dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
 }

 void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus)
 {
 	struct pci_region *pci_mem;
 	struct pci_region *pci_prefetch;
 	struct pci_region *pci_io;
 	struct udevice *ctlr = pci_get_controller(dev);
 	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);

 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
 	pci_io = ctlr_hose->pci_io;

 	/* Configure bus number registers */
 	dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, sub_bus - dev_seq(ctlr));

 	if (pci_mem) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_mem, 0x100000);

 		dm_pci_write_config16(dev, PCI_MEMORY_LIMIT,
 				      ((pci_mem->bus_lower - 1) >> 16) &
 				      PCI_MEMORY_RANGE_MASK);
 	}

 	if (pci_prefetch) {
 		u16 prefechable_64;

 		dm_pci_read_config16(dev, PCI_PREF_MEMORY_LIMIT,
 				     &prefechable_64);
 		prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;

 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_prefetch, 0x100000);

 		dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT,
 				      (((pci_prefetch->bus_lower - 1) >> 16) &
 				       PCI_PREF_RANGE_MASK) | prefechable_64);
 		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
 #ifdef CONFIG_SYS_PCI_64BIT
 			dm_pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32,
 					(pci_prefetch->bus_lower - 1) >> 32);
 #else
 			dm_pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
 #endif
 	}

 	if (pci_io) {
 		u8 io_32;

 		dm_pci_read_config8(dev, PCI_IO_LIMIT,
 				     &io_32);
 		io_32 &= PCI_IO_RANGE_TYPE_MASK;

 		/* Round I/O allocator to 4KB boundary */
 		pciauto_region_align(pci_io, 0x1000);

 		dm_pci_write_config8(dev, PCI_IO_LIMIT,
 				((((pci_io->bus_lower - 1) & 0x0000f000) >> 8) &
 				PCI_IO_RANGE_MASK) | io_32);
 		if (io_32 == PCI_IO_RANGE_TYPE_32)
 			dm_pci_write_config16(dev, PCI_IO_LIMIT_UPPER16,
 				((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
 	}
 }

 /*
  * HJF: Changed this to return int. I think this is required
  * to get the correct result when scanning bridges
  */
 int dm_pciauto_config_device(struct udevice *dev)
 {
 	struct pci_region *pci_mem;
 	struct pci_region *pci_prefetch;
 	struct pci_region *pci_io;
 	unsigned int sub_bus = PCI_BUS(dm_pci_get_bdf(dev));
 	unsigned short class;
 	struct udevice *ctlr = pci_get_controller(dev);
 	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
 	int ret;

 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
 	pci_io = ctlr_hose->pci_io;

 	dm_pci_read_config16(dev, PCI_CLASS_DEVICE, &class);

 	switch (class) {
 	case PCI_CLASS_BRIDGE_PCI:
 		debug("PCI Autoconfig: Found P2P bridge, device %d\n",
 		      PCI_DEV(dm_pci_get_bdf(dev)));

 		dm_pciauto_setup_device(dev, pci_mem, pci_prefetch, pci_io);

 		ret = dm_pci_hose_probe_bus(dev);
 		if (ret < 0)
 			return log_msg_ret("probe", ret);
 		sub_bus = ret;
 		break;

 	case PCI_CLASS_BRIDGE_CARDBUS:
 		/*
 		 * just do a minimal setup of the bridge,
 		 * let the OS take care of the rest
 		 */
 		dm_pciauto_setup_device(dev, pci_mem, pci_prefetch, pci_io);

 		debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
 		      PCI_DEV(dm_pci_get_bdf(dev)));

 		break;

 #if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
 	case PCI_CLASS_BRIDGE_OTHER:
 		debug("PCI Autoconfig: Skipping bridge device %d\n",
 		      PCI_DEV(dm_pci_get_bdf(dev)));
 		break;
 #endif
 #if defined(CONFIG_ARCH_MPC834X)
 	case PCI_CLASS_BRIDGE_OTHER:
 		/*
 		 * The host/PCI bridge 1 seems broken in 8349 - it presents
 		 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
 		 * device claiming resources io/mem/irq.. we only allow for
 		 * the PIMMR window to be allocated (BAR0 - 1MB size)
 		 */
 		debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
 		dm_pciauto_setup_device(dev, 0, hose->pci_mem,
 					hose->pci_prefetch, hose->pci_io);
 		break;
 #endif

 	default:
 		dm_pciauto_setup_device(dev, pci_mem, pci_prefetch, pci_io);
 		break;
 	}

 	return sub_bus;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* PCI autoconfiguration library
	*
	* Author: Matt Porter <mporter@mvista.com>
	*
	* Copyright 2000 MontaVista Software Inc.
	* Copyright (c) 2021 Maciej W. Rozycki <macro@orcam.me.uk>
	*/

	#include <config.h>
	#include <dm.h>
	#include <errno.h>
	#include <log.h>
	#include <pci.h>
	#include <time.h>
	#include "pci_internal.h"

	/* the user can define CFG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
	#ifndef CFG_SYS_PCI_CACHE_LINE_SIZE
	#define CFG_SYS_PCI_CACHE_LINE_SIZE 8
	#endif

	static void dm_pciauto_setup_device(struct udevice *dev,
	struct pci_region *mem,
	struct pci_region *prefetch,
	struct pci_region *io)
	{
	u32 bar_response;
	pci_size_t bar_size;
	u16 cmdstat = 0;
	int bar, bar_nr = 0;
	int bars_num;
	u8 header_type;
	int rom_addr;
	pci_addr_t bar_value;
	struct pci_region *bar_res = NULL;
	int found_mem64 = 0;
	u16 class;

	dm_pci_read_config16(dev, PCI_COMMAND, &cmdstat);
	cmdstat = (cmdstat & ~(PCI_COMMAND_IO \| PCI_COMMAND_MEMORY)) \|
	PCI_COMMAND_MASTER;

	dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type);
	header_type &= 0x7f;

	switch (header_type) {
	case PCI_HEADER_TYPE_NORMAL:
	bars_num = 6;
	break;
	case PCI_HEADER_TYPE_BRIDGE:
	bars_num = 2;
	break;
	case PCI_HEADER_TYPE_CARDBUS:
	/* CardBus header does not have any BAR */
	bars_num = 0;
	break;
	default:
	/* Skip configuring BARs for unknown header types */
	bars_num = 0;
	break;
	}

	for (bar = PCI_BASE_ADDRESS_0;
	bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
	int ret = 0;

	/* Tickle the BAR and get the response */
	dm_pci_write_config32(dev, bar, 0xffffffff);
	dm_pci_read_config32(dev, bar, &bar_response);

	/* If BAR is not implemented (or invalid) go to the next BAR */
	if (!bar_response \|\| bar_response == 0xffffffff)
	continue;

	found_mem64 = 0;

	/* Check the BAR type and set our address mask */
	if (bar_response & PCI_BASE_ADDRESS_SPACE) {
	bar_size = bar_response & PCI_BASE_ADDRESS_IO_MASK;
	bar_size &= ~(bar_size - 1);

	bar_res = io;

	debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
	bar_nr, (unsigned long long)bar_size);
	} else {
	if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
	PCI_BASE_ADDRESS_MEM_TYPE_64) {
	u32 bar_response_upper;
	u64 bar64;

	dm_pci_write_config32(dev, bar + 4, 0xffffffff);
	dm_pci_read_config32(dev, bar + 4,
	&bar_response_upper);

	bar64 = ((u64)bar_response_upper << 32) \|
	bar_response;

	bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK)
	+ 1;
	found_mem64 = 1;
	} else {
	bar_size = (u32)(~(bar_response &
	PCI_BASE_ADDRESS_MEM_MASK) + 1);
	}

	if (prefetch &&
	(bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
	bar_res = prefetch;
	else
	bar_res = mem;

	debug("PCI Autoconfig: BAR %d, %s%s, size=0x%llx, ",
	bar_nr, bar_res == prefetch ? "Prf" : "Mem",
	found_mem64 ? "64" : "",
	(unsigned long long)bar_size);
	}

	ret = pciauto_region_allocate(bar_res, bar_size,
	&bar_value, found_mem64);
	if (ret)
	printf("PCI: Failed autoconfig bar %x\n", bar);

	if (!ret) {
	/* Write it out and update our limit */
	dm_pci_write_config32(dev, bar, (u32)bar_value);

	if (found_mem64) {
	bar += 4;
	#ifdef CONFIG_SYS_PCI_64BIT
	dm_pci_write_config32(dev, bar,
	(u32)(bar_value >> 32));
	#else
	/*
	* If we are a 64-bit decoder then increment to
	* the upper 32 bits of the bar and force it to
	* locate in the lower 4GB of memory.
	*/
	dm_pci_write_config32(dev, bar, 0x00000000);
	#endif
	}
	}

	cmdstat \|= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
	PCI_COMMAND_IO : PCI_COMMAND_MEMORY;

	debug("\n");

	bar_nr++;
	}

	/* Configure the expansion ROM address */
	if (header_type == PCI_HEADER_TYPE_NORMAL \|\|
	header_type == PCI_HEADER_TYPE_BRIDGE) {
	rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
	PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
	dm_pci_write_config32(dev, rom_addr, 0xfffffffe);
	dm_pci_read_config32(dev, rom_addr, &bar_response);
	if (bar_response) {
	bar_size = -(bar_response & ~1);
	debug("PCI Autoconfig: ROM, size=%#x, ",
	(unsigned int)bar_size);
	if (pciauto_region_allocate(mem, bar_size, &bar_value,
	false) == 0) {
	dm_pci_write_config32(dev, rom_addr, bar_value);
	}
	cmdstat \|= PCI_COMMAND_MEMORY;
	debug("\n");
	}
	}

	/* PCI_COMMAND_IO must be set for VGA device */
	dm_pci_read_config16(dev, PCI_CLASS_DEVICE, &class);
	if (class == PCI_CLASS_DISPLAY_VGA)
	cmdstat \|= PCI_COMMAND_IO;

	dm_pci_write_config16(dev, PCI_COMMAND, cmdstat);
	dm_pci_write_config8(dev, PCI_CACHE_LINE_SIZE,
	CFG_SYS_PCI_CACHE_LINE_SIZE);
	dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x80);
	}

	/*
	* Check if the link of a downstream PCIe port operates correctly.
	*
	* For that check if the optional Data Link Layer Link Active status gets
	* on within a 200ms period or failing that wait until the completion of
	* that period and check if link training has shown the completed status
	* continuously throughout the second half of that period.
	*
	* Observation with the ASMedia ASM2824 Gen 3 switch indicates it takes
	* 11-44ms to indicate the Data Link Layer Link Active status at 2.5GT/s,
	* though it may take a couple of link training iterations.
	*/
	static bool dm_pciauto_exp_link_stable(struct udevice *dev, int pcie_off)
	{
	u64 loops = 0, trcount = 0, ntrcount = 0, flips = 0;
	bool dllla, lnktr, plnktr;
	u16 exp_lnksta;
	pci_dev_t bdf;
	u64 end;

	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKSTA, &exp_lnksta);
	plnktr = !!(exp_lnksta & PCI_EXP_LNKSTA_LT);

	end = get_ticks() + usec_to_tick(200000);
	do {
	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKSTA,
	&exp_lnksta);
	dllla = !!(exp_lnksta & PCI_EXP_LNKSTA_DLLLA);
	lnktr = !!(exp_lnksta & PCI_EXP_LNKSTA_LT);

	flips += plnktr ^ lnktr;
	if (lnktr) {
	ntrcount = 0;
	trcount++;
	} else {
	ntrcount++;
	}
	loops++;

	plnktr = lnktr;
	} while (!dllla && get_ticks() < end);

	bdf = dm_pci_get_bdf(dev);
	debug("PCI Autoconfig: %02x.%02x.%02x: Fixup link: DL active: %u; "
	"%3llu flips, %6llu loops of which %6llu while training, "
	"final %6llu stable\n",
	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf),
	(unsigned int)dllla,
	(unsigned long long)flips, (unsigned long long)loops,
	(unsigned long long)trcount, (unsigned long long)ntrcount);

	return dllla \|\| ntrcount >= loops / 2;
	}

	/*
	* Retrain the link of a downstream PCIe port by hand if necessary.
	*
	* This is needed at least where a downstream port of the ASMedia ASM2824
	* Gen 3 switch is wired to the upstream port of the Pericom PI7C9X2G304
	* Gen 2 switch, and observed with the Delock Riser Card PCI Express x1 >
	* 2 x PCIe x1 device, P/N 41433, plugged into the SiFive HiFive Unmatched
	* board.
	*
	* In such a configuration the switches are supposed to negotiate the link
	* speed of preferably 5.0GT/s, falling back to 2.5GT/s. However the link
	* continues switching between the two speeds indefinitely and the data
	* link layer never reaches the active state, with link training reported
	* repeatedly active ~84% of the time. Forcing the target link speed to
	* 2.5GT/s with the upstream ASM2824 device makes the two switches talk to
	* each other correctly however. And more interestingly retraining with a
	* higher target link speed afterwards lets the two successfully negotiate
	* 5.0GT/s.
	*
	* As this can potentially happen with any device and is cheap in the case
	* of correctly operating hardware, let's do it for all downstream ports,
	* for root complexes, PCIe switches and PCI/PCI-X to PCIe bridges.
	*
	* First check if automatic link training may have failed to complete, as
	* indicated by the optional Data Link Layer Link Active status being off
	* and the Link Bandwidth Management Status indicating that hardware has
	* changed the link speed or width in an attempt to correct unreliable
	* link operation. If this is the case, then check if the link operates
	* correctly by seeing whether it is being trained excessively. If it is,
	* then conclude the link is broken.
	*
	* In that case restrict the speed to 2.5GT/s, observing that the Target
	* Link Speed field is sticky and therefore the link will stay restricted
	* even after a device reset is later made by an OS that is unaware of the
	* problem. With the speed restricted request that the link be retrained
	* and check again if the link operates correctly. If not, then set the
	* Target Link Speed back to the original value.
	*
	* This requires the presence of the Link Control 2 register, so make sure
	* the PCI Express Capability Version is at least 2. Also don't try, for
	* obvious reasons, to limit the speed if 2.5GT/s is the only link speed
	* supported.
	*/
	static void dm_pciauto_exp_fixup_link(struct udevice *dev, int pcie_off)
	{
	u16 exp_lnksta, exp_lnkctl, exp_lnkctl2;
	u16 exp_flags, exp_type, exp_version;
	u32 exp_lnkcap;
	pci_dev_t bdf;

	dm_pci_read_config16(dev, pcie_off + PCI_EXP_FLAGS, &exp_flags);
	exp_version = exp_flags & PCI_EXP_FLAGS_VERS;
	if (exp_version < 2)
	return;

	exp_type = (exp_flags & PCI_EXP_FLAGS_TYPE) >> 4;
	switch (exp_type) {
	case PCI_EXP_TYPE_ROOT_PORT:
	case PCI_EXP_TYPE_DOWNSTREAM:
	case PCI_EXP_TYPE_PCIE_BRIDGE:
	break;
	default:
	return;
	}

	dm_pci_read_config32(dev, pcie_off + PCI_EXP_LNKCAP, &exp_lnkcap);
	if ((exp_lnkcap & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
	return;

	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKSTA, &exp_lnksta);
	if ((exp_lnksta & (PCI_EXP_LNKSTA_LBMS \| PCI_EXP_LNKSTA_DLLLA)) !=
	PCI_EXP_LNKSTA_LBMS)
	return;

	if (dm_pciauto_exp_link_stable(dev, pcie_off))
	return;

	bdf = dm_pci_get_bdf(dev);
	printf("PCI Autoconfig: %02x.%02x.%02x: "
	"Downstream link non-functional\n",
	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
	printf("PCI Autoconfig: %02x.%02x.%02x: "
	"Retrying with speed restricted to 2.5GT/s...\n",
	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));

	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKCTL, &exp_lnkctl);
	dm_pci_read_config16(dev, pcie_off + PCI_EXP_LNKCTL2, &exp_lnkctl2);

	dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL2,
	(exp_lnkctl2 & ~PCI_EXP_LNKCTL2_TLS) \|
	PCI_EXP_LNKCTL2_TLS_2_5GT);
	dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL,
	exp_lnkctl \| PCI_EXP_LNKCTL_RL);

	if (dm_pciauto_exp_link_stable(dev, pcie_off)) {
	printf("PCI Autoconfig: %02x.%02x.%02x: Succeeded!\n",
	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
	} else {
	printf("PCI Autoconfig: %02x.%02x.%02x: Failed!\n",
	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));

	dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL2,
	exp_lnkctl2);
	dm_pci_write_config16(dev, pcie_off + PCI_EXP_LNKCTL,
	exp_lnkctl \| PCI_EXP_LNKCTL_RL);
	}
	}

	void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus)
	{
	struct pci_region *pci_mem;
	struct pci_region *pci_prefetch;
	struct pci_region *pci_io;
	u16 cmdstat, prefechable_64;
	u8 io_32;
	struct udevice *ctlr = pci_get_controller(dev);
	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
	int pcie_off;

	pci_mem = ctlr_hose->pci_mem;
	pci_prefetch = ctlr_hose->pci_prefetch;
	pci_io = ctlr_hose->pci_io;

	dm_pci_read_config16(dev, PCI_COMMAND, &cmdstat);
	dm_pci_read_config16(dev, PCI_PREF_MEMORY_BASE, &prefechable_64);
	prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
	dm_pci_read_config8(dev, PCI_IO_BASE, &io_32);
	io_32 &= PCI_IO_RANGE_TYPE_MASK;

	/* Configure bus number registers */
	dm_pci_write_config8(dev, PCI_PRIMARY_BUS,
	PCI_BUS(dm_pci_get_bdf(dev)) - dev_seq(ctlr));
	dm_pci_write_config8(dev, PCI_SECONDARY_BUS, sub_bus - dev_seq(ctlr));
	dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, 0xff);

	if (pci_mem) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_mem, 0x100000);

	/*
	* Set up memory and I/O filter limits, assume 32-bit
	* I/O space
	*/
	dm_pci_write_config16(dev, PCI_MEMORY_BASE,
	((pci_mem->bus_lower & 0xfff00000) >> 16) &
	PCI_MEMORY_RANGE_MASK);

	cmdstat \|= PCI_COMMAND_MEMORY;
	}

	if (pci_prefetch) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_prefetch, 0x100000);

	/*
	* Set up memory and I/O filter limits, assume 32-bit
	* I/O space
	*/
	dm_pci_write_config16(dev, PCI_PREF_MEMORY_BASE,
	(((pci_prefetch->bus_lower & 0xfff00000) >> 16) &
	PCI_PREF_RANGE_MASK) \| prefechable_64);
	if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
	#ifdef CONFIG_SYS_PCI_64BIT
	dm_pci_write_config32(dev, PCI_PREF_BASE_UPPER32,
	pci_prefetch->bus_lower >> 32);
	#else
	dm_pci_write_config32(dev, PCI_PREF_BASE_UPPER32, 0x0);
	#endif

	cmdstat \|= PCI_COMMAND_MEMORY;
	} else {
	/* We don't support prefetchable memory for now, so disable */
	dm_pci_write_config16(dev, PCI_PREF_MEMORY_BASE, 0xfff0 \|
	prefechable_64);
	dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, 0x0 \|
	prefechable_64);
	if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
	dm_pci_write_config16(dev, PCI_PREF_BASE_UPPER32, 0x0);
	dm_pci_write_config16(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
	}
	}

	if (pci_io) {
	/* Round I/O allocator to 4KB boundary */
	pciauto_region_align(pci_io, 0x1000);

	dm_pci_write_config8(dev, PCI_IO_BASE,
	(((pci_io->bus_lower & 0x0000f000) >> 8) &
	PCI_IO_RANGE_MASK) \| io_32);
	if (io_32 == PCI_IO_RANGE_TYPE_32)
	dm_pci_write_config16(dev, PCI_IO_BASE_UPPER16,
	(pci_io->bus_lower & 0xffff0000) >> 16);

	cmdstat \|= PCI_COMMAND_IO;
	} else {
	/* Disable I/O if unsupported */
	dm_pci_write_config8(dev, PCI_IO_BASE, 0xf0 \| io_32);
	dm_pci_write_config8(dev, PCI_IO_LIMIT, 0x0 \| io_32);
	if (io_32 == PCI_IO_RANGE_TYPE_32) {
	dm_pci_write_config16(dev, PCI_IO_BASE_UPPER16, 0x0);
	dm_pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, 0x0);
	}
	}

	/* For PCIe devices see if we need to retrain the link by hand */
	pcie_off = dm_pci_find_capability(dev, PCI_CAP_ID_EXP);
	if (pcie_off)
	dm_pciauto_exp_fixup_link(dev, pcie_off);

	/* Enable memory and I/O accesses, enable bus master */
	dm_pci_write_config16(dev, PCI_COMMAND, cmdstat \| PCI_COMMAND_MASTER);
	}

	void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus)
	{
	struct pci_region *pci_mem;
	struct pci_region *pci_prefetch;
	struct pci_region *pci_io;
	struct udevice *ctlr = pci_get_controller(dev);
	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);

	pci_mem = ctlr_hose->pci_mem;
	pci_prefetch = ctlr_hose->pci_prefetch;
	pci_io = ctlr_hose->pci_io;

	/* Configure bus number registers */
	dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, sub_bus - dev_seq(ctlr));

	if (pci_mem) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_mem, 0x100000);

	dm_pci_write_config16(dev, PCI_MEMORY_LIMIT,
	((pci_mem->bus_lower - 1) >> 16) &
	PCI_MEMORY_RANGE_MASK);
	}

	if (pci_prefetch) {
	u16 prefechable_64;

	dm_pci_read_config16(dev, PCI_PREF_MEMORY_LIMIT,
	&prefechable_64);
	prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;

	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_prefetch, 0x100000);

	dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT,
	(((pci_prefetch->bus_lower - 1) >> 16) &
	PCI_PREF_RANGE_MASK) \| prefechable_64);
	if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
	#ifdef CONFIG_SYS_PCI_64BIT
	dm_pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32,
	(pci_prefetch->bus_lower - 1) >> 32);
	#else
	dm_pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
	#endif
	}

	if (pci_io) {
	u8 io_32;

	dm_pci_read_config8(dev, PCI_IO_LIMIT,
	&io_32);
	io_32 &= PCI_IO_RANGE_TYPE_MASK;

	/* Round I/O allocator to 4KB boundary */
	pciauto_region_align(pci_io, 0x1000);

	dm_pci_write_config8(dev, PCI_IO_LIMIT,
	((((pci_io->bus_lower - 1) & 0x0000f000) >> 8) &
	PCI_IO_RANGE_MASK) \| io_32);
	if (io_32 == PCI_IO_RANGE_TYPE_32)
	dm_pci_write_config16(dev, PCI_IO_LIMIT_UPPER16,
	((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
	}
	}

	/*
	* HJF: Changed this to return int. I think this is required
	* to get the correct result when scanning bridges
	*/
	int dm_pciauto_config_device(struct udevice *dev)
	{
	struct pci_region *pci_mem;
	struct pci_region *pci_prefetch;
	struct pci_region *pci_io;
	unsigned int sub_bus = PCI_BUS(dm_pci_get_bdf(dev));
	unsigned short class;
	struct udevice *ctlr = pci_get_controller(dev);
	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
	int ret;

	pci_mem = ctlr_hose->pci_mem;
	pci_prefetch = ctlr_hose->pci_prefetch;
	pci_io = ctlr_hose->pci_io;

	dm_pci_read_config16(dev, PCI_CLASS_DEVICE, &class);

	switch (class) {
	case PCI_CLASS_BRIDGE_PCI:
	debug("PCI Autoconfig: Found P2P bridge, device %d\n",
	PCI_DEV(dm_pci_get_bdf(dev)));

	dm_pciauto_setup_device(dev, pci_mem, pci_prefetch, pci_io);

	ret = dm_pci_hose_probe_bus(dev);
	if (ret < 0)
	return log_msg_ret("probe", ret);
	sub_bus = ret;
	break;

	case PCI_CLASS_BRIDGE_CARDBUS:
	/*
	* just do a minimal setup of the bridge,
	* let the OS take care of the rest
	*/
	dm_pciauto_setup_device(dev, pci_mem, pci_prefetch, pci_io);

	debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
	PCI_DEV(dm_pci_get_bdf(dev)));

	break;

	#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
	case PCI_CLASS_BRIDGE_OTHER:
	debug("PCI Autoconfig: Skipping bridge device %d\n",
	PCI_DEV(dm_pci_get_bdf(dev)));
	break;
	#endif
	#if defined(CONFIG_ARCH_MPC834X)
	case PCI_CLASS_BRIDGE_OTHER:
	/*
	* The host/PCI bridge 1 seems broken in 8349 - it presents
	* itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
	* device claiming resources io/mem/irq.. we only allow for
	* the PIMMR window to be allocated (BAR0 - 1MB size)
	*/
	debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
	dm_pciauto_setup_device(dev, 0, hose->pci_mem,
	hose->pci_prefetch, hose->pci_io);
	break;
	#endif

	default:
	dm_pciauto_setup_device(dev, pci_mem, pci_prefetch, pci_io);
	break;
	}

	return sub_bus;
	}