| /* |
| * (C) Copyright 2015 Google, Inc |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/types.h> |
| #include <asm/arch/cru_rk3036.h> |
| #include <asm/arch/grf_rk3036.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sdram_rk3036.h> |
| #include <asm/arch/timer.h> |
| #include <asm/arch/uart.h> |
| |
| /* |
| * we can not fit the code to access the device tree in SPL |
| * (due to 4K SRAM size limits), so these are hard-coded |
| */ |
| #define CRU_BASE 0x20000000 |
| #define GRF_BASE 0x20008000 |
| #define DDR_PHY_BASE 0x2000a000 |
| #define DDR_PCTL_BASE 0x20004000 |
| #define CPU_AXI_BUS_BASE 0x10128000 |
| |
| struct rk3036_sdram_priv { |
| struct rk3036_cru *cru; |
| struct rk3036_grf *grf; |
| struct rk3036_ddr_phy *phy; |
| struct rk3036_ddr_pctl *pctl; |
| struct rk3036_service_sys *axi_bus; |
| |
| /* ddr die config */ |
| struct rk3036_ddr_config ddr_config; |
| }; |
| |
| /* use integer mode, 396MHz dpll setting |
| * refdiv, fbdiv, postdiv1, postdiv2 |
| */ |
| const struct pll_div dpll_init_cfg = {1, 66, 4, 1}; |
| |
| /* 396Mhz ddr timing */ |
| const struct rk3036_ddr_timing ddr_timing = {0x18c, |
| {0x18c, 0xc8, 0x1f4, 0x27, 0x4e, |
| 0x4, 0x8b, 0x06, 0x03, 0x0, 0x06, 0x05, 0x0f, 0x15, 0x06, 0x04, 0x04, |
| 0x06, 0x04, 0x200, 0x03, 0x0a, 0x40, 0x2710, 0x01, 0x05, 0x05, 0x03, |
| 0x0c, 0x28, 0x100, 0x0, 0x04, 0x0}, |
| {{0x420, 0x42, 0x0, 0x0}, 0x01, 0x60}, |
| {0x24717315} }; |
| |
| /* |
| * [7:6] bank(n:n bit bank) |
| * [5:4] row(13+n) |
| * [3] cs(0:1 cs, 1:2 cs) |
| * [2:1] bank(n:n bit bank) |
| * [0] col(10+n) |
| */ |
| const char ddr_cfg_2_rbc[] = { |
| ((3 << 6) | (3 << 4) | (0 << 3) | (0 << 1) | 1), |
| ((0 << 6) | (1 << 4) | (0 << 3) | (3 << 1) | 0), |
| ((0 << 6) | (2 << 4) | (0 << 3) | (3 << 1) | 0), |
| ((0 << 6) | (3 << 4) | (0 << 3) | (3 << 1) | 0), |
| ((0 << 6) | (1 << 4) | (0 << 3) | (3 << 1) | 1), |
| ((0 << 6) | (2 << 4) | (0 << 3) | (3 << 1) | 1), |
| ((0 << 6) | (3 << 4) | (0 << 3) | (3 << 1) | 1), |
| ((0 << 6) | (0 << 4) | (0 << 3) | (3 << 1) | 0), |
| ((0 << 6) | (0 << 4) | (0 << 3) | (3 << 1) | 1), |
| ((0 << 6) | (3 << 4) | (1 << 3) | (3 << 1) | 0), |
| ((0 << 6) | (3 << 4) | (1 << 3) | (3 << 1) | 1), |
| ((1 << 6) | (2 << 4) | (0 << 3) | (2 << 1) | 0), |
| ((3 << 6) | (2 << 4) | (0 << 3) | (0 << 1) | 1), |
| ((3 << 6) | (3 << 4) | (0 << 3) | (0 << 1) | 0), |
| }; |
| |
| /* DDRPHY REG */ |
| enum { |
| /* DDRPHY_REG1 */ |
| SOFT_RESET_MASK = 3, |
| SOFT_RESET_SHIFT = 2, |
| |
| /* DDRPHY_REG2 */ |
| MEMORY_SELECT_DDR3 = 0 << 6, |
| DQS_SQU_CAL_NORMAL_MODE = 0 << 1, |
| DQS_SQU_CAL_START = 1 << 0, |
| DQS_SQU_NO_CAL = 0 << 0, |
| |
| /* DDRPHY_REG2A */ |
| CMD_DLL_BYPASS = 1 << 4, |
| CMD_DLL_BYPASS_DISABLE = 0 << 4, |
| HIGH_8BIT_DLL_BYPASS = 1 << 3, |
| HIGH_8BIT_DLL_BYPASS_DISABLE = 0 << 3, |
| LOW_8BIT_DLL_BYPASS = 1 << 2, |
| LOW_8BIT_DLL_BYPASS_DISABLE = 0 << 2, |
| |
| /* DDRPHY_REG19 */ |
| CMD_FEEDBACK_ENABLE = 1 << 5, |
| CMD_SLAVE_DLL_INVERSE_MODE = 1 << 4, |
| CMD_SLAVE_DLL_NO_INVERSE_MODE = 0 << 4, |
| CMD_SLAVE_DLL_ENALBE = 1 << 3, |
| CMD_TX_SLAVE_DLL_DELAY_MASK = 7, |
| CMD_TX_SLAVE_DLL_DELAY_SHIFT = 0, |
| |
| /* DDRPHY_REG6 */ |
| LEFT_CHN_TX_DQ_PHASE_BYPASS_90 = 1 << 4, |
| LEFT_CHN_TX_DQ_PHASE_BYPASS_0 = 0 << 4, |
| LEFT_CHN_TX_DQ_DLL_ENABLE = 1 << 3, |
| LEFT_CHN_TX_DQ_DLL_DELAY_MASK = 7, |
| LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT = 0, |
| |
| /* DDRPHY_REG8 */ |
| LEFT_CHN_RX_DQS_DELAY_TAP_MASK = 3, |
| LEFT_CHN_RX_DQS_DELAY_TAP_SHIFT = 0, |
| |
| /* DDRPHY_REG9 */ |
| RIGHT_CHN_TX_DQ_PHASE_BYPASS_90 = 1 << 4, |
| RIGHT_CHN_TX_DQ_PHASE_BYPASS_0 = 0 << 4, |
| RIGHT_CHN_TX_DQ_DLL_ENABLE = 1 << 3, |
| RIGHT_CHN_TX_DQ_DLL_DELAY_MASK = 7, |
| RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT = 0, |
| |
| /* DDRPHY_REG11 */ |
| RIGHT_CHN_RX_DQS_DELAY_TAP_MASK = 3, |
| RIGHT_CHN_RX_DQS_DELAY_TAP_SHIFT = 0, |
| |
| /* DDRPHY_REG62 */ |
| CAL_DONE_MASK = 3, |
| HIGH_8BIT_CAL_DONE = 1 << 1, |
| LOW_8BIT_CAL_DONE = 1 << 0, |
| }; |
| |
| /* PTCL */ |
| enum { |
| /* PCTL_DFISTCFG0 */ |
| DFI_INIT_START = 1 << 0, |
| DFI_DATA_BYTE_DISABLE_EN = 1 << 2, |
| |
| /* PCTL_DFISTCFG1 */ |
| DFI_DRAM_CLK_SR_EN = 1 << 0, |
| DFI_DRAM_CLK_DPD_EN = 1 << 1, |
| |
| /* PCTL_DFISTCFG2 */ |
| DFI_PARITY_INTR_EN = 1 << 0, |
| DFI_PARITY_EN = 1 << 1, |
| |
| /* PCTL_DFILPCFG0 */ |
| TLP_RESP_TIME_SHIFT = 16, |
| LP_SR_EN = 1 << 8, |
| LP_PD_EN = 1 << 0, |
| |
| /* PCTL_DFIODTCFG */ |
| RANK0_ODT_WRITE_SEL = 1 << 3, |
| RANK1_ODT_WRITE_SEL = 1 << 11, |
| |
| /* PCTL_DFIODTCFG1 */ |
| ODT_LEN_BL8_W_SHIFT = 16, |
| |
| /* PCTL_MCFG */ |
| TFAW_CFG_MASK = 3, |
| TFAW_CFG_SHIFT = 18, |
| PD_EXIT_SLOW_MODE = 0 << 17, |
| PD_ACTIVE_POWER_DOWN = 1 << 16, |
| PD_IDLE_MASK = 0xff, |
| PD_IDLE_SHIFT = 8, |
| MEM_BL4 = 0 << 0, |
| MEM_BL8 = 1 << 0, |
| |
| /* PCTL_MCFG1 */ |
| HW_EXIT_IDLE_EN_MASK = 1, |
| HW_EXIT_IDLE_EN_SHIFT = 31, |
| SR_IDLE_MASK = 0x1ff, |
| SR_IDLE_SHIFT = 0, |
| |
| /* PCTL_SCFG */ |
| HW_LOW_POWER_EN = 1 << 0, |
| |
| /* PCTL_POWCTL */ |
| POWER_UP_START = 1 << 0, |
| |
| /* PCTL_POWSTAT */ |
| POWER_UP_DONE = 1 << 0, |
| |
| /* PCTL_MCMD */ |
| START_CMD = 1 << 31, |
| BANK_ADDR_MASK = 7, |
| BANK_ADDR_SHIFT = 17, |
| CMD_ADDR_MASK = 0x1fff, |
| CMD_ADDR_SHIFT = 4, |
| DESELECT_CMD = 0, |
| PREA_CMD, |
| REF_CMD, |
| MRS_CMD, |
| ZQCS_CMD, |
| ZQCL_CMD, |
| RSTL_CMD, |
| MRR_CMD = 8, |
| |
| /* PCTL_STAT */ |
| INIT_MEM = 0, |
| CONFIG, |
| CONFIG_REQ, |
| ACCESS, |
| ACCESS_REQ, |
| LOW_POWER, |
| LOW_POWER_ENTRY_REQ, |
| LOW_POWER_EXIT_REQ, |
| PCTL_STAT_MASK = 7, |
| |
| /* PCTL_SCTL */ |
| INIT_STATE = 0, |
| CFG_STATE = 1, |
| GO_STATE = 2, |
| SLEEP_STATE = 3, |
| WAKEUP_STATE = 4, |
| }; |
| |
| /* GRF_SOC_CON2 */ |
| #define MSCH4_MAINDDR3 (1 << 7) |
| #define PHY_DRV_ODT_SET(n) ((n << 4) | n) |
| #define DDR3_DLL_RESET (1 << 8) |
| |
| /* CK pull up/down driver strength control */ |
| enum { |
| PHY_RON_DISABLE = 0, |
| PHY_RON_309OHM = 1, |
| PHY_RON_155OHM, |
| PHY_RON_103OHM = 3, |
| PHY_RON_63OHM = 5, |
| PHY_RON_45OHM = 7, |
| PHY_RON_77OHM, |
| PHY_RON_62OHM, |
| PHY_RON_52OHM, |
| PHY_RON_44OHM, |
| PHY_RON_39OHM, |
| PHY_RON_34OHM, |
| PHY_RON_31OHM, |
| PHY_RON_28OHM, |
| }; |
| |
| /* DQ pull up/down control */ |
| enum { |
| PHY_RTT_DISABLE = 0, |
| PHY_RTT_861OHM = 1, |
| PHY_RTT_431OHM, |
| PHY_RTT_287OHM, |
| PHY_RTT_216OHM, |
| PHY_RTT_172OHM, |
| PHY_RTT_145OHM, |
| PHY_RTT_124OHM, |
| PHY_RTT_215OHM, |
| PHY_RTT_144OHM = 0xa, |
| PHY_RTT_123OHM, |
| PHY_RTT_108OHM, |
| PHY_RTT_96OHM, |
| PHY_RTT_86OHM, |
| PHY_RTT_78OHM, |
| }; |
| |
| /* DQS squelch DLL delay */ |
| enum { |
| DQS_DLL_NO_DELAY = 0, |
| DQS_DLL_22P5_DELAY, |
| DQS_DLL_45_DELAY, |
| DQS_DLL_67P5_DELAY, |
| DQS_DLL_90_DELAY, |
| DQS_DLL_112P5_DELAY, |
| DQS_DLL_135_DELAY, |
| DQS_DLL_157P5_DELAY, |
| }; |
| |
| /* GRF_OS_REG1 */ |
| enum { |
| /* |
| * 000: lpddr |
| * 001: ddr |
| * 010: ddr2 |
| * 011: ddr3 |
| * 100: lpddr2-s2 |
| * 101: lpddr2-s4 |
| * 110: lpddr3 |
| */ |
| DDR_TYPE_MASK = 7, |
| DDR_TYPE_SHIFT = 13, |
| |
| /* 0: 1 chn, 1: 2 chn */ |
| DDR_CHN_CNT_SHIFT = 12, |
| |
| /* 0: 1 rank, 1: 2 rank */ |
| DDR_RANK_CNT_MASK = 1, |
| DDR_RANK_CNT_SHIFT = 11, |
| |
| /* |
| * 00: 9col |
| * 01: 10col |
| * 10: 11col |
| * 11: 12col |
| */ |
| DDR_COL_MASK = 3, |
| DDR_COL_SHIFT = 9, |
| |
| /* 0: 8 bank, 1: 4 bank*/ |
| DDR_BANK_MASK = 1, |
| DDR_BANK_SHIFT = 8, |
| |
| /* |
| * 00: 13 row |
| * 01: 14 row |
| * 10: 15 row |
| * 11: 16 row |
| */ |
| DDR_CS0_ROW_MASK = 3, |
| DDR_CS0_ROW_SHIFT = 6, |
| DDR_CS1_ROW_MASK = 3, |
| DDR_CS1_ROW_SHIFT = 4, |
| |
| /* |
| * 00: 32 bit |
| * 01: 16 bit |
| * 10: 8 bit |
| * rk3036 only support 16bit |
| */ |
| DDR_BW_MASK = 3, |
| DDR_BW_SHIFT = 2, |
| DDR_DIE_BW_MASK = 3, |
| DDR_DIE_BW_SHIFT = 0, |
| }; |
| |
| static void rkdclk_init(struct rk3036_sdram_priv *priv) |
| { |
| struct rk3036_pll *pll = &priv->cru->pll[1]; |
| |
| /* pll enter slow-mode */ |
| rk_clrsetreg(&priv->cru->cru_mode_con, |
| DPLL_MODE_MASK << DPLL_MODE_SHIFT, |
| DPLL_MODE_SLOW << DPLL_MODE_SHIFT); |
| |
| /* use integer mode */ |
| rk_clrreg(&pll->con1, 1 << PLL_DSMPD_SHIFT); |
| |
| rk_clrsetreg(&pll->con0, |
| PLL_POSTDIV1_MASK << PLL_POSTDIV1_SHIFT | PLL_FBDIV_MASK, |
| (dpll_init_cfg.postdiv1 << PLL_POSTDIV1_SHIFT) | |
| dpll_init_cfg.fbdiv); |
| rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK << PLL_POSTDIV2_SHIFT | |
| PLL_REFDIV_MASK << PLL_REFDIV_SHIFT, |
| (dpll_init_cfg.postdiv2 << PLL_POSTDIV2_SHIFT | |
| dpll_init_cfg.refdiv << PLL_REFDIV_SHIFT)); |
| |
| /* waiting for pll lock */ |
| while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT)) |
| rockchip_udelay(1); |
| |
| /* PLL enter normal-mode */ |
| rk_clrsetreg(&priv->cru->cru_mode_con, |
| DPLL_MODE_MASK << DPLL_MODE_SHIFT, |
| DPLL_MODE_NORM << DPLL_MODE_SHIFT); |
| } |
| |
| static void copy_to_reg(u32 *dest, const u32 *src, u32 n) |
| { |
| int i; |
| |
| for (i = 0; i < n / sizeof(u32); i++) { |
| writel(*src, dest); |
| src++; |
| dest++; |
| } |
| } |
| |
| void phy_pctrl_reset(struct rk3036_sdram_priv *priv) |
| { |
| struct rk3036_ddr_phy *ddr_phy = priv->phy; |
| |
| rk_clrsetreg(&priv->cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT | |
| 1 << DDRCTRL_SRST_SHIFT | 1 << DDRPHY_PSRST_SHIFT | |
| 1 << DDRPHY_SRST_SHIFT, |
| 1 << DDRCTRL_PSRST_SHIFT | 1 << DDRCTRL_SRST_SHIFT | |
| 1 << DDRPHY_PSRST_SHIFT | 1 << DDRPHY_SRST_SHIFT); |
| |
| rockchip_udelay(10); |
| |
| rk_clrreg(&priv->cru->cru_softrst_con[5], 1 << DDRPHY_PSRST_SHIFT | |
| 1 << DDRPHY_SRST_SHIFT); |
| rockchip_udelay(10); |
| |
| rk_clrreg(&priv->cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT | |
| 1 << DDRCTRL_SRST_SHIFT); |
| rockchip_udelay(10); |
| |
| clrsetbits_le32(&ddr_phy->ddrphy_reg1, |
| SOFT_RESET_MASK << SOFT_RESET_SHIFT, |
| 0 << SOFT_RESET_SHIFT); |
| rockchip_udelay(10); |
| clrsetbits_le32(&ddr_phy->ddrphy_reg1, |
| SOFT_RESET_MASK << SOFT_RESET_SHIFT, |
| 3 << SOFT_RESET_SHIFT); |
| |
| rockchip_udelay(1); |
| } |
| |
| void phy_dll_bypass_set(struct rk3036_sdram_priv *priv, unsigned int freq) |
| { |
| struct rk3036_ddr_phy *ddr_phy = priv->phy; |
| |
| if (freq < ddr_timing.freq) { |
| writel(CMD_DLL_BYPASS | HIGH_8BIT_DLL_BYPASS | |
| LOW_8BIT_DLL_BYPASS, &ddr_phy->ddrphy_reg2a); |
| |
| writel(LEFT_CHN_TX_DQ_PHASE_BYPASS_90 | |
| LEFT_CHN_TX_DQ_DLL_ENABLE | |
| (0 & LEFT_CHN_TX_DQ_DLL_DELAY_MASK) << |
| LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT, &ddr_phy->ddrphy_reg6); |
| |
| writel(RIGHT_CHN_TX_DQ_PHASE_BYPASS_90 | |
| RIGHT_CHN_TX_DQ_DLL_ENABLE | |
| (0 & RIGHT_CHN_TX_DQ_DLL_DELAY_MASK) << |
| RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT, |
| &ddr_phy->ddrphy_reg9); |
| } else { |
| writel(CMD_DLL_BYPASS_DISABLE | HIGH_8BIT_DLL_BYPASS_DISABLE | |
| LOW_8BIT_DLL_BYPASS_DISABLE, &ddr_phy->ddrphy_reg2a); |
| |
| writel(LEFT_CHN_TX_DQ_PHASE_BYPASS_0 | |
| LEFT_CHN_TX_DQ_DLL_ENABLE | |
| (4 & LEFT_CHN_TX_DQ_DLL_DELAY_MASK) << |
| LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT, |
| &ddr_phy->ddrphy_reg6); |
| |
| writel(RIGHT_CHN_TX_DQ_PHASE_BYPASS_0 | |
| RIGHT_CHN_TX_DQ_DLL_ENABLE | |
| (4 & RIGHT_CHN_TX_DQ_DLL_DELAY_MASK) << |
| RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT, |
| &ddr_phy->ddrphy_reg9); |
| } |
| |
| writel(CMD_SLAVE_DLL_NO_INVERSE_MODE | CMD_SLAVE_DLL_ENALBE | |
| (0 & CMD_TX_SLAVE_DLL_DELAY_MASK) << |
| CMD_TX_SLAVE_DLL_DELAY_SHIFT, &ddr_phy->ddrphy_reg19); |
| |
| /* 45 degree delay */ |
| writel((DQS_DLL_45_DELAY & LEFT_CHN_RX_DQS_DELAY_TAP_MASK) << |
| LEFT_CHN_RX_DQS_DELAY_TAP_SHIFT, &ddr_phy->ddrphy_reg8); |
| writel((DQS_DLL_45_DELAY & RIGHT_CHN_RX_DQS_DELAY_TAP_MASK) << |
| RIGHT_CHN_RX_DQS_DELAY_TAP_SHIFT, &ddr_phy->ddrphy_reg11); |
| } |
| |
| static void send_command(struct rk3036_ddr_pctl *pctl, |
| u32 rank, u32 cmd, u32 arg) |
| { |
| writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd); |
| rockchip_udelay(1); |
| while (readl(&pctl->mcmd) & START_CMD) |
| ; |
| } |
| |
| static void memory_init(struct rk3036_sdram_priv *priv) |
| { |
| struct rk3036_ddr_pctl *pctl = priv->pctl; |
| |
| send_command(pctl, 3, DESELECT_CMD, 0); |
| rockchip_udelay(1); |
| send_command(pctl, 3, PREA_CMD, 0); |
| send_command(pctl, 3, MRS_CMD, |
| (0x02 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT | |
| (ddr_timing.phy_timing.mr[2] & CMD_ADDR_MASK) << |
| CMD_ADDR_SHIFT); |
| |
| send_command(pctl, 3, MRS_CMD, |
| (0x03 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT | |
| (ddr_timing.phy_timing.mr[3] & CMD_ADDR_MASK) << |
| CMD_ADDR_SHIFT); |
| |
| send_command(pctl, 3, MRS_CMD, |
| (0x01 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT | |
| (ddr_timing.phy_timing.mr[1] & CMD_ADDR_MASK) << |
| CMD_ADDR_SHIFT); |
| |
| send_command(pctl, 3, MRS_CMD, |
| (0x00 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT | |
| (ddr_timing.phy_timing.mr[0] & CMD_ADDR_MASK) << |
| CMD_ADDR_SHIFT | DDR3_DLL_RESET); |
| |
| send_command(pctl, 3, ZQCL_CMD, 0); |
| } |
| |
| static void data_training(struct rk3036_sdram_priv *priv) |
| { |
| struct rk3036_ddr_phy *ddr_phy = priv->phy; |
| struct rk3036_ddr_pctl *pctl = priv->pctl; |
| u32 value; |
| |
| /* disable auto refresh */ |
| value = readl(&pctl->trefi), |
| writel(0, &pctl->trefi); |
| |
| clrsetbits_le32(&ddr_phy->ddrphy_reg2, 0x03, |
| DQS_SQU_CAL_NORMAL_MODE | DQS_SQU_CAL_START); |
| |
| rockchip_udelay(1); |
| while ((readl(&ddr_phy->ddrphy_reg62) & CAL_DONE_MASK) != |
| (HIGH_8BIT_CAL_DONE | LOW_8BIT_CAL_DONE)) { |
| ; |
| } |
| |
| clrsetbits_le32(&ddr_phy->ddrphy_reg2, 0x03, |
| DQS_SQU_CAL_NORMAL_MODE | DQS_SQU_NO_CAL); |
| |
| /* |
| * since data training will take about 20us, so send some auto |
| * refresh(about 7.8us) to complement the lost time |
| */ |
| send_command(pctl, 3, REF_CMD, 0); |
| send_command(pctl, 3, REF_CMD, 0); |
| send_command(pctl, 3, REF_CMD, 0); |
| |
| writel(value, &pctl->trefi); |
| } |
| |
| static void move_to_config_state(struct rk3036_sdram_priv *priv) |
| { |
| unsigned int state; |
| struct rk3036_ddr_pctl *pctl = priv->pctl; |
| |
| while (1) { |
| state = readl(&pctl->stat) & PCTL_STAT_MASK; |
| switch (state) { |
| case LOW_POWER: |
| writel(WAKEUP_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MASK) |
| != ACCESS) |
| ; |
| /* |
| * If at low power state, need wakeup first, and then |
| * enter the config, so fallthrough |
| */ |
| case ACCESS: |
| /* fallthrough */ |
| case INIT_MEM: |
| writel(CFG_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG) |
| ; |
| break; |
| case CONFIG: |
| return; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static void move_to_access_state(struct rk3036_sdram_priv *priv) |
| { |
| unsigned int state; |
| struct rk3036_ddr_pctl *pctl = priv->pctl; |
| |
| while (1) { |
| state = readl(&pctl->stat) & PCTL_STAT_MASK; |
| switch (state) { |
| case LOW_POWER: |
| writel(WAKEUP_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS) |
| ; |
| break; |
| case INIT_MEM: |
| writel(CFG_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG) |
| ; |
| /* fallthrough */ |
| case CONFIG: |
| writel(GO_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS) |
| ; |
| break; |
| case ACCESS: |
| return; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static void pctl_cfg(struct rk3036_sdram_priv *priv) |
| { |
| struct rk3036_ddr_pctl *pctl = priv->pctl; |
| u32 burst_len; |
| u32 reg; |
| |
| writel(DFI_INIT_START | DFI_DATA_BYTE_DISABLE_EN, &pctl->dfistcfg0); |
| writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, &pctl->dfistcfg1); |
| writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2); |
| writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN, |
| &pctl->dfilpcfg0); |
| |
| writel(1, &pctl->dfitphyupdtype0); |
| writel(0x0d, &pctl->dfitphyrdlat); |
| |
| /* cs0 and cs1 write odt enable */ |
| writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL), |
| &pctl->dfiodtcfg); |
| |
| /* odt write length */ |
| writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1); |
| |
| /* phyupd and ctrlupd disabled */ |
| writel(0, &pctl->dfiupdcfg); |
| |
| if ((ddr_timing.noc_timing.burstlen << 1) == 4) |
| burst_len = MEM_BL4; |
| else |
| burst_len = MEM_BL8; |
| |
| copy_to_reg(&pctl->togcnt1u, &ddr_timing.pctl_timing.togcnt1u, |
| sizeof(struct rk3036_pctl_timing)); |
| reg = readl(&pctl->tcl); |
| writel(reg - 3, &pctl->dfitrddataen); |
| reg = readl(&pctl->tcwl); |
| writel(reg - 1, &pctl->dfitphywrlat); |
| |
| writel(burst_len | (1 & TFAW_CFG_MASK) << TFAW_CFG_SHIFT | |
| PD_EXIT_SLOW_MODE | PD_ACTIVE_POWER_DOWN | |
| (0 & PD_IDLE_MASK) << PD_IDLE_SHIFT, |
| &pctl->mcfg); |
| |
| writel(RK_SETBITS(MSCH4_MAINDDR3), &priv->grf->soc_con2); |
| setbits_le32(&pctl->scfg, HW_LOW_POWER_EN); |
| } |
| |
| static void phy_cfg(struct rk3036_sdram_priv *priv) |
| { |
| struct rk3036_ddr_phy *ddr_phy = priv->phy; |
| struct rk3036_service_sys *axi_bus = priv->axi_bus; |
| |
| writel(ddr_timing.noc_timing.noc_timing, &axi_bus->ddrtiming); |
| writel(0x3f, &axi_bus->readlatency); |
| |
| writel(MEMORY_SELECT_DDR3 | DQS_SQU_CAL_NORMAL_MODE, |
| &ddr_phy->ddrphy_reg2); |
| |
| clrsetbits_le32(&ddr_phy->ddrphy_reg3, 1, ddr_timing.phy_timing.bl); |
| writel(ddr_timing.phy_timing.cl_al, &ddr_phy->ddrphy_reg4a); |
| writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg16); |
| writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg22); |
| writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg25); |
| writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg26); |
| writel(PHY_DRV_ODT_SET(PHY_RTT_216OHM), &ddr_phy->ddrphy_reg27); |
| writel(PHY_DRV_ODT_SET(PHY_RTT_216OHM), &ddr_phy->ddrphy_reg28); |
| } |
| |
| void dram_cfg_rbc(struct rk3036_sdram_priv *priv) |
| { |
| char noc_config; |
| int i = 0; |
| struct rk3036_ddr_config config = priv->ddr_config; |
| struct rk3036_service_sys *axi_bus = priv->axi_bus; |
| |
| move_to_config_state(priv); |
| |
| /* 2bit in BIT1, 2 */ |
| if (config.rank == 2) { |
| noc_config = (config.cs0_row - 13) << 4 | config.bank << 1 | |
| 1 << 3 | (config.col - 10); |
| if (noc_config == ddr_cfg_2_rbc[9]) { |
| i = 9; |
| goto finish; |
| } else if (noc_config == ddr_cfg_2_rbc[10]) { |
| i = 10; |
| goto finish; |
| } |
| } |
| |
| noc_config = (config.cs0_row - 13) << 4 | config.bank << 1 | |
| (config.col - 10); |
| |
| for (i = 0; i < sizeof(ddr_cfg_2_rbc); i++) { |
| if (noc_config == ddr_cfg_2_rbc[i]) |
| goto finish; |
| } |
| |
| /* bank: 1 bit in BIT6,7, 1bit in BIT1, 2 */ |
| noc_config = 1 << 6 | (config.cs0_row - 13) << 4 | |
| 2 << 1 | (config.col - 10); |
| if (noc_config == ddr_cfg_2_rbc[11]) { |
| i = 11; |
| goto finish; |
| } |
| |
| /* bank: 2bit in BIT6,7 */ |
| noc_config = (config.bank << 6) | (config.cs0_row - 13) << 4 | |
| (config.col - 10); |
| |
| if (noc_config == ddr_cfg_2_rbc[0]) |
| i = 0; |
| else if (noc_config == ddr_cfg_2_rbc[12]) |
| i = 12; |
| else if (noc_config == ddr_cfg_2_rbc[13]) |
| i = 13; |
| finish: |
| writel(i, &axi_bus->ddrconf); |
| move_to_access_state(priv); |
| } |
| |
| static void sdram_all_config(struct rk3036_sdram_priv *priv) |
| { |
| u32 os_reg = 0; |
| u32 cs1_row = 0; |
| struct rk3036_ddr_config config = priv->ddr_config; |
| |
| if (config.rank > 1) |
| cs1_row = config.cs1_row - 13; |
| |
| os_reg = config.ddr_type << DDR_TYPE_SHIFT | |
| 0 << DDR_CHN_CNT_SHIFT | |
| (config.rank - 1) << DDR_RANK_CNT_SHIFT | |
| (config.col - 1) << DDR_COL_SHIFT | |
| (config.bank == 3 ? 0 : 1) << DDR_BANK_SHIFT | |
| (config.cs0_row - 13) << DDR_CS0_ROW_SHIFT | |
| cs1_row << DDR_CS1_ROW_SHIFT | |
| 1 << DDR_BW_SHIFT | config.bw << DDR_DIE_BW_SHIFT; |
| writel(os_reg, &priv->grf->os_reg[1]); |
| } |
| |
| size_t sdram_size(void) |
| { |
| u32 size, os_reg, cs0_row, cs1_row, col, bank, rank; |
| struct rk3036_grf *grf = (void *)GRF_BASE; |
| |
| os_reg = readl(&grf->os_reg[1]); |
| |
| cs0_row = 13 + ((os_reg >> DDR_CS0_ROW_SHIFT) & DDR_CS0_ROW_MASK); |
| cs1_row = 13 + ((os_reg >> DDR_CS1_ROW_SHIFT) & DDR_CS1_ROW_MASK); |
| col = 9 + ((os_reg >> DDR_COL_SHIFT) & DDR_COL_MASK); |
| bank = 3 - ((os_reg >> DDR_BANK_SHIFT) & DDR_BANK_MASK); |
| rank = 1 + ((os_reg >> DDR_RANK_CNT_SHIFT) & DDR_RANK_CNT_MASK); |
| |
| /* row + col + bank + bw(rk3036 only support 16bit, so fix in 1) */ |
| size = 1 << (cs0_row + col + bank + 1); |
| |
| if (rank > 1) |
| size += size >> (cs0_row - cs1_row); |
| |
| return size; |
| } |
| |
| void sdram_init(void) |
| { |
| struct rk3036_sdram_priv sdram_priv; |
| |
| sdram_priv.cru = (void *)CRU_BASE; |
| sdram_priv.grf = (void *)GRF_BASE; |
| sdram_priv.phy = (void *)DDR_PHY_BASE; |
| sdram_priv.pctl = (void *)DDR_PCTL_BASE; |
| sdram_priv.axi_bus = (void *)CPU_AXI_BUS_BASE; |
| |
| get_ddr_config(&sdram_priv.ddr_config); |
| sdram_all_config(&sdram_priv); |
| rkdclk_init(&sdram_priv); |
| phy_pctrl_reset(&sdram_priv); |
| phy_dll_bypass_set(&sdram_priv, ddr_timing.freq); |
| pctl_cfg(&sdram_priv); |
| phy_cfg(&sdram_priv); |
| writel(POWER_UP_START, &sdram_priv.pctl->powctl); |
| while (!(readl(&sdram_priv.pctl->powstat) & POWER_UP_DONE)) |
| ; |
| memory_init(&sdram_priv); |
| move_to_config_state(&sdram_priv); |
| data_training(&sdram_priv); |
| move_to_access_state(&sdram_priv); |
| dram_cfg_rbc(&sdram_priv); |
| } |