| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Clock drivers for Qualcomm sm8250 |
| * |
| * (C) Copyright 2024 Linaro Ltd. |
| */ |
| |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| #include <linux/bug.h> |
| #include <linux/bitops.h> |
| #include <dt-bindings/clock/qcom,gcc-sm8250.h> |
| |
| #include "clock-qcom.h" |
| |
| #define GCC_SE12_UART_RCG_REG 0x184D0 |
| #define GCC_SDCC2_APPS_CLK_SRC_REG 0x1400c |
| |
| #define APCS_GPLL0_ENA_VOTE 0x79000 |
| #define APCS_GPLL9_STATUS 0x1c000 |
| #define APCS_GPLLX_ENA_REG 0x52018 |
| |
| #define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf020 |
| #define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf038 |
| #define USB3_PRIM_PHY_AUX_CMD_RCGR 0xf064 |
| |
| static const struct freq_tbl ftbl_gcc_qupv3_wrap1_s4_clk_src[] = { |
| F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625), |
| F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625), |
| F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0), |
| F(29491200, CFG_CLK_SRC_GPLL0_EVEN, 1, 1536, 15625), |
| F(32000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 75), |
| F(48000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 25), |
| F(50000000, CFG_CLK_SRC_GPLL0_EVEN, 6, 0, 0), |
| F(64000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 16, 75), |
| F(75000000, CFG_CLK_SRC_GPLL0_EVEN, 4, 0, 0), |
| F(80000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 15), |
| F(96000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 25), |
| F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0), |
| {} |
| }; |
| |
| static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = { |
| F(400000, CFG_CLK_SRC_CXO, 12, 1, 4), |
| F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0), |
| F(25000000, CFG_CLK_SRC_GPLL0_EVEN, 12, 0, 0), |
| F(50000000, CFG_CLK_SRC_GPLL0_EVEN, 6, 0, 0), |
| F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0), |
| F(202000000, CFG_CLK_SRC_GPLL9, 4, 0, 0), |
| {} |
| }; |
| |
| static struct pll_vote_clk gpll9_vote_clk = { |
| .status = APCS_GPLL9_STATUS, |
| .status_bit = BIT(31), |
| .ena_vote = APCS_GPLLX_ENA_REG, |
| .vote_bit = BIT(9), |
| }; |
| |
| static ulong sm8250_set_rate(struct clk *clk, ulong rate) |
| { |
| struct msm_clk_priv *priv = dev_get_priv(clk->dev); |
| const struct freq_tbl *freq; |
| |
| if (clk->id < priv->data->num_clks) |
| debug("%s: %s, requested rate=%ld\n", __func__, |
| priv->data->clks[clk->id].name, rate); |
| |
| switch (clk->id) { |
| case GCC_QUPV3_WRAP1_S4_CLK: /*UART2*/ |
| freq = qcom_find_freq(ftbl_gcc_qupv3_wrap1_s4_clk_src, rate); |
| clk_rcg_set_rate_mnd(priv->base, GCC_SE12_UART_RCG_REG, |
| freq->pre_div, freq->m, freq->n, freq->src, |
| 16); |
| |
| return freq->freq; |
| case GCC_SDCC2_APPS_CLK: |
| /* Enable GPLL9 so that we can point SDCC2_APPS_CLK_SRC at it */ |
| clk_enable_gpll0(priv->base, &gpll9_vote_clk); |
| freq = qcom_find_freq(ftbl_gcc_sdcc2_apps_clk_src, rate); |
| printf("%s: got freq %u\n", __func__, freq->freq); |
| WARN(freq->src != CFG_CLK_SRC_GPLL9, |
| "SDCC2_APPS_CLK_SRC not set to GPLL9, requested rate %lu\n", |
| rate); |
| clk_rcg_set_rate_mnd(priv->base, GCC_SDCC2_APPS_CLK_SRC_REG, |
| freq->pre_div, freq->m, freq->n, |
| CFG_CLK_SRC_GPLL9, 8); |
| |
| return rate; |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct gate_clk sm8250_clks[] = { |
| GATE_CLK(GCC_AGGRE_UFS_CARD_AXI_CLK, 0x750cc, 0x00000001), |
| GATE_CLK(GCC_AGGRE_UFS_PHY_AXI_CLK, 0x770cc, 0x00000001), |
| GATE_CLK(GCC_AGGRE_USB3_PRIM_AXI_CLK, 0x0f080, 0x00000001), |
| GATE_CLK(GCC_AGGRE_USB3_SEC_AXI_CLK, 0x10080, 0x00000001), |
| GATE_CLK(GCC_CFG_NOC_USB3_PRIM_AXI_CLK, 0x0f07c, 0x00000001), |
| GATE_CLK(GCC_CFG_NOC_USB3_SEC_AXI_CLK, 0x1007c, 0x00000001), |
| GATE_CLK(GCC_QMIP_CAMERA_NRT_AHB_CLK, 0x0b018, 0x00000001), |
| GATE_CLK(GCC_QMIP_CAMERA_RT_AHB_CLK, 0x0b01c, 0x00000001), |
| GATE_CLK(GCC_QMIP_DISP_AHB_CLK, 0x0b020, 0x00000001), |
| GATE_CLK(GCC_QMIP_VIDEO_CVP_AHB_CLK, 0x0b010, 0x00000001), |
| GATE_CLK(GCC_QMIP_VIDEO_VCODEC_AHB_CLK, 0x0b014, 0x00000001), |
| GATE_CLK(GCC_QUPV3_WRAP0_CORE_2X_CLK, 0x52008, 0x00000200), |
| GATE_CLK(GCC_QUPV3_WRAP0_CORE_CLK, 0x52008, 0x00000100), |
| GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x52008, 0x00000400), |
| GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x52008, 0x00000800), |
| GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK, 0x52008, 0x00001000), |
| GATE_CLK(GCC_QUPV3_WRAP0_S3_CLK, 0x52008, 0x00002000), |
| GATE_CLK(GCC_QUPV3_WRAP0_S4_CLK, 0x52008, 0x00004000), |
| GATE_CLK(GCC_QUPV3_WRAP0_S5_CLK, 0x52008, 0x00008000), |
| GATE_CLK(GCC_QUPV3_WRAP0_S6_CLK, 0x52008, 0x00010000), |
| GATE_CLK(GCC_QUPV3_WRAP0_S7_CLK, 0x52008, 0x00020000), |
| GATE_CLK(GCC_QUPV3_WRAP1_CORE_2X_CLK, 0x52008, 0x00040000), |
| GATE_CLK(GCC_QUPV3_WRAP1_CORE_CLK, 0x52008, 0x00080000), |
| GATE_CLK(GCC_QUPV3_WRAP1_S0_CLK, 0x52008, 0x00400000), |
| GATE_CLK(GCC_QUPV3_WRAP1_S1_CLK, 0x52008, 0x00800000), |
| GATE_CLK(GCC_QUPV3_WRAP1_S2_CLK, 0x52008, 0x01000000), |
| GATE_CLK(GCC_QUPV3_WRAP1_S3_CLK, 0x52008, 0x02000000), |
| GATE_CLK(GCC_QUPV3_WRAP1_S4_CLK, 0x52008, 0x04000000), |
| GATE_CLK(GCC_QUPV3_WRAP1_S5_CLK, 0x52008, 0x08000000), |
| GATE_CLK(GCC_QUPV3_WRAP2_CORE_2X_CLK, 0x52010, 0x00000008), |
| GATE_CLK(GCC_QUPV3_WRAP2_CORE_CLK, 0x52010, 0x00000001), |
| GATE_CLK(GCC_QUPV3_WRAP2_S0_CLK, 0x52010, 0x00000010), |
| GATE_CLK(GCC_QUPV3_WRAP2_S1_CLK, 0x52010, 0x00000020), |
| GATE_CLK(GCC_QUPV3_WRAP2_S2_CLK, 0x52010, 0x00000040), |
| GATE_CLK(GCC_QUPV3_WRAP2_S3_CLK, 0x52010, 0x00000080), |
| GATE_CLK(GCC_QUPV3_WRAP2_S4_CLK, 0x52010, 0x00000100), |
| GATE_CLK(GCC_QUPV3_WRAP2_S5_CLK, 0x52010, 0x00000200), |
| GATE_CLK(GCC_QUPV3_WRAP_0_M_AHB_CLK, 0x52008, 0x00000040), |
| GATE_CLK(GCC_QUPV3_WRAP_0_S_AHB_CLK, 0x52008, 0x00000080), |
| GATE_CLK(GCC_QUPV3_WRAP_1_M_AHB_CLK, 0x52008, 0x00100000), |
| GATE_CLK(GCC_QUPV3_WRAP_1_S_AHB_CLK, 0x52008, 0x00200000), |
| GATE_CLK(GCC_QUPV3_WRAP_2_M_AHB_CLK, 0x52010, 0x00000004), |
| GATE_CLK(GCC_QUPV3_WRAP_2_S_AHB_CLK, 0x52010, 0x00000002), |
| GATE_CLK(GCC_SDCC2_AHB_CLK, 0x14008, 0x00000001), |
| GATE_CLK(GCC_SDCC2_APPS_CLK, 0x14004, 0x00000001), |
| GATE_CLK(GCC_SDCC4_AHB_CLK, 0x16008, 0x00000001), |
| GATE_CLK(GCC_SDCC4_APPS_CLK, 0x16004, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_AHB_CLK, 0x75018, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_AXI_CLK, 0x75010, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_ICE_CORE_CLK, 0x75064, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_PHY_AUX_CLK, 0x7509c, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_RX_SYMBOL_0_CLK, 0x75020, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_RX_SYMBOL_1_CLK, 0x750b8, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_TX_SYMBOL_0_CLK, 0x7501c, 0x00000001), |
| GATE_CLK(GCC_UFS_CARD_UNIPRO_CORE_CLK, 0x7505c, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_AHB_CLK, 0x77018, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_AXI_CLK, 0x77010, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_ICE_CORE_CLK, 0x77064, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_PHY_AUX_CLK, 0x7709c, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_RX_SYMBOL_0_CLK, 0x77020, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_RX_SYMBOL_1_CLK, 0x770b8, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_TX_SYMBOL_0_CLK, 0x7701c, 0x00000001), |
| GATE_CLK(GCC_UFS_PHY_UNIPRO_CORE_CLK, 0x7705c, 0x00000001), |
| GATE_CLK(GCC_USB30_PRIM_MASTER_CLK, 0x0f010, 0x00000001), |
| GATE_CLK(GCC_USB30_PRIM_MOCK_UTMI_CLK, 0x0f01c, 0x00000001), |
| GATE_CLK(GCC_USB30_PRIM_SLEEP_CLK, 0x0f018, 0x00000001), |
| GATE_CLK(GCC_USB30_SEC_MASTER_CLK, 0x10010, 0x00000001), |
| GATE_CLK(GCC_USB30_SEC_MOCK_UTMI_CLK, 0x1001c, 0x00000001), |
| GATE_CLK(GCC_USB30_SEC_SLEEP_CLK, 0x10018, 0x00000001), |
| GATE_CLK(GCC_USB3_PRIM_PHY_AUX_CLK, 0x0f054, 0x00000001), |
| GATE_CLK(GCC_USB3_PRIM_PHY_COM_AUX_CLK, 0x0f058, 0x00000001), |
| GATE_CLK(GCC_USB3_PRIM_PHY_PIPE_CLK, 0x0f05c, 0x00000001), |
| GATE_CLK(GCC_USB3_SEC_CLKREF_EN, 0x8c010, 0x00000001), |
| GATE_CLK(GCC_USB3_SEC_PHY_AUX_CLK, 0x10054, 0x00000001), |
| GATE_CLK(GCC_USB3_SEC_PHY_COM_AUX_CLK, 0x10058, 0x00000001), |
| GATE_CLK(GCC_USB3_SEC_PHY_PIPE_CLK, 0x1005c, 0x00000001), |
| }; |
| |
| static int sm8250_enable(struct clk *clk) |
| { |
| struct msm_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| if (priv->data->num_clks < clk->id) { |
| debug("%s: unknown clk id %lu\n", __func__, clk->id); |
| return 0; |
| } |
| |
| debug("%s: clk %s\n", __func__, sm8250_clks[clk->id].name); |
| |
| switch (clk->id) { |
| case GCC_USB30_PRIM_MASTER_CLK: |
| qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_AUX_CLK); |
| qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_COM_AUX_CLK); |
| break; |
| case GCC_USB30_SEC_MASTER_CLK: |
| qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_AUX_CLK); |
| qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_COM_AUX_CLK); |
| break; |
| } |
| |
| qcom_gate_clk_en(priv, clk->id); |
| |
| return 0; |
| } |
| |
| static const struct qcom_reset_map sm8250_gcc_resets[] = { |
| [GCC_GPU_BCR] = { 0x71000 }, |
| [GCC_MMSS_BCR] = { 0xb000 }, |
| [GCC_NPU_BWMON_BCR] = { 0x73000 }, |
| [GCC_NPU_BCR] = { 0x4d000 }, |
| [GCC_PCIE_0_BCR] = { 0x6b000 }, |
| [GCC_PCIE_0_LINK_DOWN_BCR] = { 0x6c014 }, |
| [GCC_PCIE_0_NOCSR_COM_PHY_BCR] = { 0x6c020 }, |
| [GCC_PCIE_0_PHY_BCR] = { 0x6c01c }, |
| [GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR] = { 0x6c028 }, |
| [GCC_PCIE_1_BCR] = { 0x8d000 }, |
| [GCC_PCIE_1_LINK_DOWN_BCR] = { 0x8e014 }, |
| [GCC_PCIE_1_NOCSR_COM_PHY_BCR] = { 0x8e020 }, |
| [GCC_PCIE_1_PHY_BCR] = { 0x8e01c }, |
| [GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR] = { 0x8e000 }, |
| [GCC_PCIE_2_BCR] = { 0x6000 }, |
| [GCC_PCIE_2_LINK_DOWN_BCR] = { 0x1f014 }, |
| [GCC_PCIE_2_NOCSR_COM_PHY_BCR] = { 0x1f020 }, |
| [GCC_PCIE_2_PHY_BCR] = { 0x1f01c }, |
| [GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR] = { 0x1f028 }, |
| [GCC_PCIE_PHY_BCR] = { 0x6f000 }, |
| [GCC_PCIE_PHY_CFG_AHB_BCR] = { 0x6f00c }, |
| [GCC_PCIE_PHY_COM_BCR] = { 0x6f010 }, |
| [GCC_PDM_BCR] = { 0x33000 }, |
| [GCC_PRNG_BCR] = { 0x34000 }, |
| [GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 }, |
| [GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 }, |
| [GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 }, |
| [GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 }, |
| [GCC_QUSB2PHY_SEC_BCR] = { 0x12004 }, |
| [GCC_SDCC2_BCR] = { 0x14000 }, |
| [GCC_SDCC4_BCR] = { 0x16000 }, |
| [GCC_TSIF_BCR] = { 0x36000 }, |
| [GCC_UFS_CARD_BCR] = { 0x75000 }, |
| [GCC_UFS_PHY_BCR] = { 0x77000 }, |
| [GCC_USB30_PRIM_BCR] = { 0xf000 }, |
| [GCC_USB30_SEC_BCR] = { 0x10000 }, |
| [GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 }, |
| [GCC_USB3_DP_PHY_SEC_BCR] = { 0x50014 }, |
| [GCC_USB3_PHY_PRIM_BCR] = { 0x50000 }, |
| [GCC_USB3_PHY_SEC_BCR] = { 0x5000c }, |
| [GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 }, |
| [GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 }, |
| [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, |
| }; |
| |
| static const struct qcom_power_map sm8250_gdscs[] = { |
| [PCIE_0_GDSC] = { 0x6b004 }, [PCIE_1_GDSC] = { 0x8d004 }, |
| [PCIE_2_GDSC] = { 0x6004 }, [UFS_CARD_GDSC] = { 0x75004 }, |
| [UFS_PHY_GDSC] = { 0x77004 }, [USB30_PRIM_GDSC] = { 0xf004 }, |
| [USB30_SEC_GDSC] = { 0x10004 }, |
| }; |
| |
| static struct msm_clk_data qcs404_gcc_data = { |
| .resets = sm8250_gcc_resets, |
| .num_resets = ARRAY_SIZE(sm8250_gcc_resets), |
| .clks = sm8250_clks, |
| .num_clks = ARRAY_SIZE(sm8250_clks), |
| .power_domains = sm8250_gdscs, |
| .num_power_domains = ARRAY_SIZE(sm8250_gdscs), |
| |
| .enable = sm8250_enable, |
| .set_rate = sm8250_set_rate, |
| }; |
| |
| static const struct udevice_id gcc_sm8250_of_match[] = { |
| { |
| .compatible = "qcom,gcc-sm8250", |
| .data = (ulong)&qcs404_gcc_data, |
| }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(gcc_sm8250) = { |
| .name = "gcc_sm8250", |
| .id = UCLASS_NOP, |
| .of_match = gcc_sm8250_of_match, |
| .bind = qcom_cc_bind, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |