| /* |
| * (C) Copyright 2012 Stephen Warren |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _BCM2835_MBOX_H |
| #define _BCM2835_MBOX_H |
| |
| #include <linux/compiler.h> |
| |
| /* |
| * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU") |
| * and the ARM CPU. The ARM CPU is often thought of as the main CPU. |
| * However, the VideoCore actually controls the initial SoC boot, and hides |
| * much of the hardware behind a protocol. This protocol is transported |
| * using the SoC's mailbox hardware module. |
| * |
| * The mailbox hardware supports passing 32-bit values back and forth. |
| * Presumably by software convention of the firmware, the bottom 4 bits of the |
| * value are used to indicate a logical channel, and the upper 28 bits are the |
| * actual payload. Various channels exist using these simple raw messages. See |
| * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an |
| * example, the messages on the power management channel are a bitmask of |
| * devices whose power should be enabled. |
| * |
| * The property mailbox channel passes messages that contain the (16-byte |
| * aligned) ARM physical address of a memory buffer. This buffer is passed to |
| * the VC for processing, is modified in-place by the VC, and the address then |
| * passed back to the ARM CPU as the response mailbox message to indicate |
| * request completion. The buffers have a generic and extensible format; each |
| * buffer contains a standard header, a list of "tags", and a terminating zero |
| * entry. Each tag contains an ID indicating its type, and length fields for |
| * generic parsing. With some limitations, an arbitrary set of tags may be |
| * combined together into a single message buffer. This file defines structs |
| * representing the header and many individual tag layouts and IDs. |
| */ |
| |
| /* Raw mailbox HW */ |
| |
| #define BCM2835_MBOX_PHYSADDR 0x2000b880 |
| |
| struct bcm2835_mbox_regs { |
| u32 read; |
| u32 rsvd0[5]; |
| u32 status; |
| u32 config; |
| u32 write; |
| }; |
| |
| #define BCM2835_MBOX_STATUS_WR_FULL 0x80000000 |
| #define BCM2835_MBOX_STATUS_RD_EMPTY 0x40000000 |
| |
| /* Lower 4-bits are channel ID */ |
| #define BCM2835_CHAN_MASK 0xf |
| #define BCM2835_MBOX_PACK(chan, data) (((data) & (~BCM2835_CHAN_MASK)) | \ |
| (chan & BCM2835_CHAN_MASK)) |
| #define BCM2835_MBOX_UNPACK_CHAN(val) ((val) & BCM2835_CHAN_MASK) |
| #define BCM2835_MBOX_UNPACK_DATA(val) ((val) & (~BCM2835_CHAN_MASK)) |
| |
| /* Property mailbox buffer structures */ |
| |
| #define BCM2835_MBOX_PROP_CHAN 8 |
| |
| /* All message buffers must start with this header */ |
| struct bcm2835_mbox_hdr { |
| u32 buf_size; |
| u32 code; |
| }; |
| |
| #define BCM2835_MBOX_REQ_CODE 0 |
| #define BCM2835_MBOX_RESP_CODE_SUCCESS 0x80000000 |
| |
| #define BCM2835_MBOX_INIT_HDR(_m_) { \ |
| memset((_m_), 0, sizeof(*(_m_))); \ |
| (_m_)->hdr.buf_size = sizeof(*(_m_)); \ |
| (_m_)->hdr.code = 0; \ |
| (_m_)->end_tag = 0; \ |
| } |
| |
| /* |
| * A message buffer contains a list of tags. Each tag must also start with |
| * a standardized header. |
| */ |
| struct bcm2835_mbox_tag_hdr { |
| u32 tag; |
| u32 val_buf_size; |
| u32 val_len; |
| }; |
| |
| #define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \ |
| (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \ |
| (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \ |
| (_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \ |
| } |
| |
| #define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \ |
| (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \ |
| (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \ |
| (_t_)->tag_hdr.val_len = 0; \ |
| } |
| |
| /* When responding, the VC sets this bit in val_len to indicate a response */ |
| #define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE 0x80000000 |
| |
| /* |
| * Below we define the ID and struct for many possible tags. This header only |
| * defines individual tag structs, not entire message structs, since in |
| * general an arbitrary set of tags may be combined into a single message. |
| * Clients of the mbox API are expected to define their own overall message |
| * structures by combining the header, a set of tags, and a terminating |
| * entry. For example, |
| * |
| * struct msg { |
| * struct bcm2835_mbox_hdr hdr; |
| * struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; |
| * ... perhaps other tags here ... |
| * u32 end_tag; |
| * }; |
| */ |
| |
| #define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005 |
| |
| struct bcm2835_mbox_tag_get_arm_mem { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| } req; |
| struct { |
| u32 mem_base; |
| u32 mem_size; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_POWER_DEVID_SDHCI 0 |
| #define BCM2835_MBOX_POWER_DEVID_UART0 1 |
| #define BCM2835_MBOX_POWER_DEVID_UART1 2 |
| #define BCM2835_MBOX_POWER_DEVID_USB_HCD 3 |
| #define BCM2835_MBOX_POWER_DEVID_I2C0 4 |
| #define BCM2835_MBOX_POWER_DEVID_I2C1 5 |
| #define BCM2835_MBOX_POWER_DEVID_I2C2 6 |
| #define BCM2835_MBOX_POWER_DEVID_SPI 7 |
| #define BCM2835_MBOX_POWER_DEVID_CCP2TX 8 |
| |
| #define BCM2835_MBOX_POWER_STATE_RESP_ON (1 << 0) |
| /* Device doesn't exist */ |
| #define BCM2835_MBOX_POWER_STATE_RESP_NODEV (1 << 1) |
| |
| #define BCM2835_MBOX_TAG_GET_POWER_STATE 0x00020001 |
| |
| struct bcm2835_mbox_tag_get_power_state { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| u32 device_id; |
| } req; |
| struct { |
| u32 device_id; |
| u32 state; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_SET_POWER_STATE 0x00028001 |
| |
| #define BCM2835_MBOX_SET_POWER_STATE_REQ_ON (1 << 0) |
| #define BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT (1 << 1) |
| |
| struct bcm2835_mbox_tag_set_power_state { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| u32 device_id; |
| u32 state; |
| } req; |
| struct { |
| u32 device_id; |
| u32 state; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_CLOCK_RATE 0x00030002 |
| |
| #define BCM2835_MBOX_CLOCK_ID_EMMC 1 |
| #define BCM2835_MBOX_CLOCK_ID_UART 2 |
| #define BCM2835_MBOX_CLOCK_ID_ARM 3 |
| #define BCM2835_MBOX_CLOCK_ID_CORE 4 |
| #define BCM2835_MBOX_CLOCK_ID_V3D 5 |
| #define BCM2835_MBOX_CLOCK_ID_H264 6 |
| #define BCM2835_MBOX_CLOCK_ID_ISP 7 |
| #define BCM2835_MBOX_CLOCK_ID_SDRAM 8 |
| #define BCM2835_MBOX_CLOCK_ID_PIXEL 9 |
| #define BCM2835_MBOX_CLOCK_ID_PWM 10 |
| |
| struct bcm2835_mbox_tag_get_clock_rate { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| u32 clock_id; |
| } req; |
| struct { |
| u32 clock_id; |
| u32 rate_hz; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_ALLOCATE_BUFFER 0x00040001 |
| |
| struct bcm2835_mbox_tag_allocate_buffer { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| u32 alignment; |
| } req; |
| struct { |
| u32 fb_address; |
| u32 fb_size; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_RELEASE_BUFFER 0x00048001 |
| |
| struct bcm2835_mbox_tag_release_buffer { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| } req; |
| struct { |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_BLANK_SCREEN 0x00040002 |
| |
| struct bcm2835_mbox_tag_blank_screen { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| /* bit 0 means on, other bots reserved */ |
| u32 state; |
| } req; |
| struct { |
| u32 state; |
| } resp; |
| } body; |
| }; |
| |
| /* Physical means output signal */ |
| #define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H 0x00040003 |
| #define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H 0x00044003 |
| #define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H 0x00048003 |
| |
| struct bcm2835_mbox_tag_physical_w_h { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 width; |
| u32 height; |
| } req; |
| struct { |
| u32 width; |
| u32 height; |
| } resp; |
| } body; |
| }; |
| |
| /* Virtual means display buffer */ |
| #define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H 0x00040004 |
| #define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H 0x00044004 |
| #define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H 0x00048004 |
| |
| struct bcm2835_mbox_tag_virtual_w_h { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 width; |
| u32 height; |
| } req; |
| struct { |
| u32 width; |
| u32 height; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_DEPTH 0x00040005 |
| #define BCM2835_MBOX_TAG_TEST_DEPTH 0x00044005 |
| #define BCM2835_MBOX_TAG_SET_DEPTH 0x00048005 |
| |
| struct bcm2835_mbox_tag_depth { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 bpp; |
| } req; |
| struct { |
| u32 bpp; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_PIXEL_ORDER 0x00040006 |
| #define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER 0x00044005 |
| #define BCM2835_MBOX_TAG_SET_PIXEL_ORDER 0x00048006 |
| |
| #define BCM2835_MBOX_PIXEL_ORDER_BGR 0 |
| #define BCM2835_MBOX_PIXEL_ORDER_RGB 1 |
| |
| struct bcm2835_mbox_tag_pixel_order { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 order; |
| } req; |
| struct { |
| u32 order; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_ALPHA_MODE 0x00040007 |
| #define BCM2835_MBOX_TAG_TEST_ALPHA_MODE 0x00044007 |
| #define BCM2835_MBOX_TAG_SET_ALPHA_MODE 0x00048007 |
| |
| #define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE 0 |
| #define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT 1 |
| #define BCM2835_MBOX_ALPHA_MODE_IGNORED 2 |
| |
| struct bcm2835_mbox_tag_alpha_mode { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 alpha; |
| } req; |
| struct { |
| u32 alpha; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_PITCH 0x00040008 |
| |
| struct bcm2835_mbox_tag_pitch { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| } req; |
| struct { |
| u32 pitch; |
| } resp; |
| } body; |
| }; |
| |
| /* Offset of display window within buffer */ |
| #define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET 0x00040009 |
| #define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET 0x00044009 |
| #define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET 0x00048009 |
| |
| struct bcm2835_mbox_tag_virtual_offset { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 x; |
| u32 y; |
| } req; |
| struct { |
| u32 x; |
| u32 y; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_OVERSCAN 0x0004000a |
| #define BCM2835_MBOX_TAG_TEST_OVERSCAN 0x0004400a |
| #define BCM2835_MBOX_TAG_SET_OVERSCAN 0x0004800a |
| |
| struct bcm2835_mbox_tag_overscan { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| /* req not used for get */ |
| struct { |
| u32 top; |
| u32 bottom; |
| u32 left; |
| u32 right; |
| } req; |
| struct { |
| u32 top; |
| u32 bottom; |
| u32 left; |
| u32 right; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_GET_PALETTE 0x0004000b |
| |
| struct bcm2835_mbox_tag_get_palette { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| } req; |
| struct { |
| u32 data[1024]; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_TEST_PALETTE 0x0004400b |
| |
| struct bcm2835_mbox_tag_test_palette { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| u32 offset; |
| u32 num_entries; |
| u32 data[256]; |
| } req; |
| struct { |
| u32 is_invalid; |
| } resp; |
| } body; |
| }; |
| |
| #define BCM2835_MBOX_TAG_SET_PALETTE 0x0004800b |
| |
| struct bcm2835_mbox_tag_set_palette { |
| struct bcm2835_mbox_tag_hdr tag_hdr; |
| union { |
| struct { |
| u32 offset; |
| u32 num_entries; |
| u32 data[256]; |
| } req; |
| struct { |
| u32 is_invalid; |
| } resp; |
| } body; |
| }; |
| |
| /* |
| * Pass a raw u32 message to the VC, and receive a raw u32 back. |
| * |
| * Returns 0 for success, any other value for error. |
| */ |
| int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv); |
| |
| /* |
| * Pass a complete property-style buffer to the VC, and wait until it has |
| * been processed. |
| * |
| * This function expects a pointer to the mbox_hdr structure in an attempt |
| * to ensure some degree of type safety. However, some number of tags and |
| * a termination value are expected to immediately follow the header in |
| * memory, as required by the property protocol. |
| * |
| * Returns 0 for success, any other value for error. |
| */ |
| int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer); |
| |
| #endif |