drivers/net/vsc9953.c - github/trini/u-boot - Gitiles

 /*
  *  Copyright 2014 Freescale Semiconductor, Inc.
  *
  *  SPDX-License-Identifier:      GPL-2.0+
  *
  *  Driver for the Vitesse VSC9953 L2 Switch
  */

 #include <asm/io.h>
 #include <asm/fsl_serdes.h>
 #include <fm_eth.h>
 #include <fsl_memac.h>
 #include <vsc9953.h>

 static struct vsc9953_info vsc9953_l2sw = {
 		.port[0] = VSC9953_PORT_INFO_INITIALIZER(0),
 		.port[1] = VSC9953_PORT_INFO_INITIALIZER(1),
 		.port[2] = VSC9953_PORT_INFO_INITIALIZER(2),
 		.port[3] = VSC9953_PORT_INFO_INITIALIZER(3),
 		.port[4] = VSC9953_PORT_INFO_INITIALIZER(4),
 		.port[5] = VSC9953_PORT_INFO_INITIALIZER(5),
 		.port[6] = VSC9953_PORT_INFO_INITIALIZER(6),
 		.port[7] = VSC9953_PORT_INFO_INITIALIZER(7),
 		.port[8] = VSC9953_PORT_INFO_INITIALIZER(8),
 		.port[9] = VSC9953_PORT_INFO_INITIALIZER(9),
 };

 void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus)
 {
 	if (!VSC9953_PORT_CHECK(port))
 		return;

 	vsc9953_l2sw.port[port].bus = bus;
 }

 void vsc9953_port_info_set_phy_address(int port, int address)
 {
 	if (!VSC9953_PORT_CHECK(port))
 		return;

 	vsc9953_l2sw.port[port].phyaddr = address;
 }

 void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int)
 {
 	if (!VSC9953_PORT_CHECK(port))
 		return;

 	vsc9953_l2sw.port[port].enet_if = phy_int;
 }

 void vsc9953_port_enable(int port)
 {
 	if (!VSC9953_PORT_CHECK(port))
 		return;

 	vsc9953_l2sw.port[port].enabled = 1;
 }

 void vsc9953_port_disable(int port)
 {
 	if (!VSC9953_PORT_CHECK(port))
 		return;

 	vsc9953_l2sw.port[port].enabled = 0;
 }

 static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
 		int regnum, int value)
 {
 	int			timeout = 50000;

 	out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
 			((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
 			(0x1 << 1));
 	asm("sync");

 	while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout)
 		udelay(1);

 	if (timeout == 0)
 		debug("Timeout waiting for MDIO write\n");
 }

 static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
 		int regnum)
 {
 	int			value = 0xFFFF;
 	int			timeout = 50000;

 	while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout)
 		udelay(1);
 	if (timeout == 0) {
 		debug("Timeout waiting for MDIO operation to finish\n");
 		return value;
 	}

 	/* Put the address of the phy, and the register
 	 * number into MIICMD
 	 */
 	out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
 			((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
 			(0x2 << 1));

 	timeout = 50000;
 	/* Wait for the the indication that the read is done */
 	while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout)
 		udelay(1);
 	if (timeout == 0)
 		debug("Timeout waiting for MDIO read\n");

 	/* Grab the value read from the PHY */
 	value = in_le32(&phyregs->miimdata);

 	if ((value & 0x00030000) == 0)
 		return value & 0x0000ffff;

 	return value;
 }

 static int init_phy(struct eth_device *dev)
 {
 	struct vsc9953_port_info	*l2sw_port = dev->priv;
 	struct phy_device		*phydev = NULL;

 #ifdef CONFIG_PHYLIB
 	if (!l2sw_port->bus)
 		return 0;
 	phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev,
 			l2sw_port->enet_if);
 	if (!phydev) {
 		printf("Failed to connect\n");
 		return -1;
 	}

 	phydev->supported &= SUPPORTED_10baseT_Half |
 			SUPPORTED_10baseT_Full |
 			SUPPORTED_100baseT_Half |
 			SUPPORTED_100baseT_Full |
 			SUPPORTED_1000baseT_Full;
 	phydev->advertising = phydev->supported;

 	l2sw_port->phydev = phydev;

 	phy_config(phydev);
 #endif

 	return 0;
 }

 static int vsc9953_port_init(int port)
 {
 	struct eth_device		*dev;

 	/* Internal ports never have a PHY */
 	if (VSC9953_INTERNAL_PORT_CHECK(port))
 		return 0;

 	/* alloc eth device */
 	dev = (struct eth_device *)calloc(1, sizeof(struct eth_device));
 	if (!dev)
 		return 1;

 	sprintf(dev->name, "SW@PORT%d", port);
 	dev->priv = &vsc9953_l2sw.port[port];
 	dev->init = NULL;
 	dev->halt = NULL;
 	dev->send = NULL;
 	dev->recv = NULL;

 	if (init_phy(dev)) {
 		free(dev);
 		return 1;
 	}

 	return 0;
 }

 void vsc9953_init(bd_t *bis)
 {
 	u32				i, hdx_cfg = 0, phy_addr = 0;
 	int				timeout;
 	struct vsc9953_system_reg	*l2sys_reg;
 	struct vsc9953_qsys_reg		*l2qsys_reg;
 	struct vsc9953_dev_gmii		*l2dev_gmii_reg;
 	struct vsc9953_analyzer		*l2ana_reg;
 	struct vsc9953_devcpu_gcb	*l2dev_gcb;

 	l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET +
 			VSC9953_DEV_GMII_OFFSET);

 	l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
 			VSC9953_ANA_OFFSET);

 	l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET +
 			VSC9953_SYS_OFFSET);

 	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
 			VSC9953_QSYS_OFFSET);

 	l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET +
 			VSC9953_DEVCPU_GCB);

 	out_le32(&l2dev_gcb->chip_regs.soft_rst,
 		 CONFIG_VSC9953_SOFT_SWC_RST_ENA);
 	timeout = 50000;
 	while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) &
 			CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout)
 		udelay(1); /* busy wait for vsc9953 soft reset */
 	if (timeout == 0)
 		debug("Timeout waiting for VSC9953 to reset\n");

 	out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE |
 		 CONFIG_VSC9953_MEM_INIT);

 	timeout = 50000;
 	while ((in_le32(&l2sys_reg->sys.reset_cfg) &
 		CONFIG_VSC9953_MEM_INIT) && --timeout)
 		udelay(1); /* busy wait for vsc9953 memory init */
 	if (timeout == 0)
 		debug("Timeout waiting for VSC9953 memory to initialize\n");

 	out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg)
 			| CONFIG_VSC9953_CORE_ENABLE));

 	/* VSC9953 Setting to be done once only */
 	out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00);

 	for (i = 0; i < VSC9953_MAX_PORTS; i++) {
 		if (vsc9953_port_init(i))
 			printf("Failed to initialize l2switch port %d\n", i);

 		/* Enable VSC9953 GMII Ports Port ID 0 - 7 */
 		if (VSC9953_INTERNAL_PORT_CHECK(i)) {
 			out_le32(&l2ana_reg->pfc[i].pfc_cfg,
 				 CONFIG_VSC9953_PFC_FC_QSGMII);
 			out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
 				 CONFIG_VSC9953_MAC_FC_CFG_QSGMII);
 		} else {
 			out_le32(&l2ana_reg->pfc[i].pfc_cfg,
 				 CONFIG_VSC9953_PFC_FC);
 			out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
 				 CONFIG_VSC9953_MAC_FC_CFG);
 		}
 		out_le32(&l2dev_gmii_reg->port_mode.clock_cfg,
 			 CONFIG_VSC9953_CLOCK_CFG);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg,
 			 CONFIG_VSC9953_MAC_ENA_CFG);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg,
 			 CONFIG_VSC9953_MAC_MODE_CFG);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg,
 			 CONFIG_VSC9953_MAC_IFG_CFG);
 		/* mac_hdx_cfg varies with port id*/
 		hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16));
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg);
 		out_le32(&l2sys_reg->sys.front_port_mode[i],
 			 CONFIG_VSC9953_FRONT_PORT_MODE);
 		out_le32(&l2qsys_reg->sys.switch_port_mode[i],
 			 CONFIG_VSC9953_PORT_ENA);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg,
 			 CONFIG_VSC9953_MAC_MAX_LEN);
 		out_le32(&l2sys_reg->pause_cfg.pause_cfg[i],
 			 CONFIG_VSC9953_PAUSE_CFG);
 		/* WAIT FOR 2 us*/
 		udelay(2);

 		l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(
 				(char *)l2dev_gmii_reg
 				+ T1040_SWITCH_GMII_DEV_OFFSET);

 		/* Initialize Lynx PHY Wrappers */
 		phy_addr = 0;
 		if (vsc9953_l2sw.port[i].enet_if ==
 				PHY_INTERFACE_MODE_QSGMII)
 			phy_addr = (i + 0x4) & 0x1F;
 		else if (vsc9953_l2sw.port[i].enet_if ==
 				PHY_INTERFACE_MODE_SGMII)
 			phy_addr = (i + 1) & 0x1F;

 		if (phy_addr) {
 			/* SGMII IF mode + AN enable */
 			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
 					   0x14, PHY_SGMII_IF_MODE_AN |
 					   PHY_SGMII_IF_MODE_SGMII);
 			/* Dev ability according to SGMII specification */
 			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
 					   0x4, PHY_SGMII_DEV_ABILITY_SGMII);
 			/* Adjust link timer for SGMII
 			 * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40
 			 */
 			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
 					   0x13, 0x0003);
 			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
 					   0x12, 0x0d40);
 			/* Restart AN */
 			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
 					   0x0, PHY_SGMII_CR_DEF_VAL |
 					   PHY_SGMII_CR_RESET_AN);

 			timeout = 50000;
 			while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0],
 					phy_addr, 0x01) & 0x0020) && --timeout)
 				udelay(1); /* wait for AN to complete */
 			if (timeout == 0)
 				debug("Timeout waiting for AN to complete\n");
 		}
 	}

 	printf("VSC9953 L2 switch initialized\n");
 	return;
 }

 #ifdef CONFIG_VSC9953_CMD
 /* Enable/disable status of a VSC9953 port */
 static void vsc9953_port_status_set(int port_nr, u8 enabled)
 {
 	u32			val;
 	struct vsc9953_qsys_reg	*l2qsys_reg;

 	/* Administrative down */
 	if (vsc9953_l2sw.port[port_nr].enabled == 0)
 		return;

 	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
 			VSC9953_QSYS_OFFSET);

 	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]);
 	if (enabled == 1)
 		val |= (1 << 13);
 	else
 		val &= ~(1 << 13);

 	out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val);
 }

 /* Set all VSC9953 ports' status */
 static void vsc9953_port_all_status_set(u8 enabled)
 {
 	int		i;

 	for (i = 0; i < VSC9953_MAX_PORTS; i++)
 		vsc9953_port_status_set(i, enabled);
 }

 /* Start autonegotiation for a VSC9953 PHY */
 static void vsc9953_phy_autoneg(int port_nr)
 {
 	if (!vsc9953_l2sw.port[port_nr].phydev)
 		return;

 	if (vsc9953_l2sw.port[port_nr].phydev->drv->startup(
 			vsc9953_l2sw.port[port_nr].phydev))
 		printf("Failed to start PHY for port %d\n", port_nr);
 }

 /* Start autonegotiation for all VSC9953 PHYs */
 static void vsc9953_phy_all_autoneg(void)
 {
 	int		i;

 	for (i = 0; i < VSC9953_MAX_PORTS; i++)
 		vsc9953_phy_autoneg(i);
 }

 /* Print a VSC9953 port's configuration */
 static void vsc9953_port_config_show(int port)
 {
 	int			speed;
 	int			duplex;
 	int			link;
 	u8			enabled;
 	u32			val;
 	struct vsc9953_qsys_reg	*l2qsys_reg;

 	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
 			VSC9953_QSYS_OFFSET);

 	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]);
 	enabled = vsc9953_l2sw.port[port].enabled &
 			((val & 0x00002000) >> 13);

 	/* internal ports (8 and 9) are fixed */
 	if (VSC9953_INTERNAL_PORT_CHECK(port)) {
 		link = 1;
 		speed = SPEED_2500;
 		duplex = DUPLEX_FULL;
 	} else {
 		if (vsc9953_l2sw.port[port].phydev) {
 			link = vsc9953_l2sw.port[port].phydev->link;
 			speed = vsc9953_l2sw.port[port].phydev->speed;
 			duplex = vsc9953_l2sw.port[port].phydev->duplex;
 		} else {
 			link = -1;
 			speed = -1;
 			duplex = -1;
 		}
 	}

 	printf("%8d ", port);
 	printf("%8s ", enabled == 1 ? "enabled" : "disabled");
 	printf("%8s ", link == 1 ? "up" : "down");

 	switch (speed) {
 	case SPEED_10:
 		printf("%8d ", 10);
 		break;
 	case SPEED_100:
 		printf("%8d ", 100);
 		break;
 	case SPEED_1000:
 		printf("%8d ", 1000);
 		break;
 	case SPEED_2500:
 		printf("%8d ", 2500);
 		break;
 	case SPEED_10000:
 		printf("%8d ", 10000);
 		break;
 	default:
 		printf("%8s ", "-");
 	}

 	printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half");
 }

 /* Print VSC9953 ports' configuration */
 static void vsc9953_port_all_config_show(void)
 {
 	int		i;

 	for (i = 0; i < VSC9953_MAX_PORTS; i++)
 		vsc9953_port_config_show(i);
 }

 /* function to interpret commands starting with "ethsw " */
 static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	u8 enable;
 	u32 port;

 	if (argc < 4)
 		return -1;

 	if (strcmp(argv[1], "port"))
 		return -1;

 	if (!strcmp(argv[3], "show")) {
 		if (!strcmp(argv[2], "all")) {
 			vsc9953_phy_all_autoneg();
 			printf("%8s %8s %8s %8s %8s\n",
 			       "Port", "Status", "Link", "Speed",
 			       "Duplex");
 			vsc9953_port_all_config_show();
 			return 0;
 		} else {
 			port = simple_strtoul(argv[2], NULL, 10);
 			if (!VSC9953_PORT_CHECK(port))
 				return -1;
 			vsc9953_phy_autoneg(port);
 			printf("%8s %8s %8s %8s %8s\n",
 			       "Port", "Status", "Link", "Speed",
 			       "Duplex");
 			vsc9953_port_config_show(port);
 			return 0;
 		}
 	} else if (!strcmp(argv[3], "enable")) {
 		enable = 1;
 	} else if (!strcmp(argv[3], "disable")) {
 		enable = 0;
 	} else {
 		return -1;
 	}

 	if (!strcmp(argv[2], "all")) {
 		vsc9953_port_all_status_set(enable);
 		return 0;
 	} else {
 		port = simple_strtoul(argv[2], NULL, 10);
 		if (!VSC9953_PORT_CHECK(port))
 			return -1;
 		vsc9953_port_status_set(port, enable);
 		return 0;
 	}

 	return -1;
 }

 U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
 	   "vsc9953 l2 switch commands",
 	   "port <port_nr> enable|disable\n"
 	   "    - enable/disable an l2 switch port\n"
 	   "      port_nr=0..9; use \"all\" for all ports\n"
 	   "ethsw port <port_nr> show\n"
 	   "    - show an l2 switch port's configuration\n"
 	   "      port_nr=0..9; use \"all\" for all ports\n"
 );
 #endif /* CONFIG_VSC9953_CMD */
	/*
	* Copyright 2014 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*
	* Driver for the Vitesse VSC9953 L2 Switch
	*/

	#include <asm/io.h>
	#include <asm/fsl_serdes.h>
	#include <fm_eth.h>
	#include <fsl_memac.h>
	#include <vsc9953.h>

	static struct vsc9953_info vsc9953_l2sw = {
	.port[0] = VSC9953_PORT_INFO_INITIALIZER(0),
	.port[1] = VSC9953_PORT_INFO_INITIALIZER(1),
	.port[2] = VSC9953_PORT_INFO_INITIALIZER(2),
	.port[3] = VSC9953_PORT_INFO_INITIALIZER(3),
	.port[4] = VSC9953_PORT_INFO_INITIALIZER(4),
	.port[5] = VSC9953_PORT_INFO_INITIALIZER(5),
	.port[6] = VSC9953_PORT_INFO_INITIALIZER(6),
	.port[7] = VSC9953_PORT_INFO_INITIALIZER(7),
	.port[8] = VSC9953_PORT_INFO_INITIALIZER(8),
	.port[9] = VSC9953_PORT_INFO_INITIALIZER(9),
	};

	void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus)
	{
	if (!VSC9953_PORT_CHECK(port))
	return;

	vsc9953_l2sw.port[port].bus = bus;
	}

	void vsc9953_port_info_set_phy_address(int port, int address)
	{
	if (!VSC9953_PORT_CHECK(port))
	return;

	vsc9953_l2sw.port[port].phyaddr = address;
	}

	void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int)
	{
	if (!VSC9953_PORT_CHECK(port))
	return;

	vsc9953_l2sw.port[port].enet_if = phy_int;
	}

	void vsc9953_port_enable(int port)
	{
	if (!VSC9953_PORT_CHECK(port))
	return;

	vsc9953_l2sw.port[port].enabled = 1;
	}

	void vsc9953_port_disable(int port)
	{
	if (!VSC9953_PORT_CHECK(port))
	return;

	vsc9953_l2sw.port[port].enabled = 0;
	}

	static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
	int regnum, int value)
	{
	int timeout = 50000;

	out_le32(&phyregs->miimcmd, (0x1 << 31) \| ((port_addr & 0x1f) << 25) \|
	((regnum & 0x1f) << 20) \| ((value & 0xffff) << 4) \|
	(0x1 << 1));
	asm("sync");

	while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout)
	udelay(1);

	if (timeout == 0)
	debug("Timeout waiting for MDIO write\n");
	}

	static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
	int regnum)
	{
	int value = 0xFFFF;
	int timeout = 50000;

	while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout)
	udelay(1);
	if (timeout == 0) {
	debug("Timeout waiting for MDIO operation to finish\n");
	return value;
	}

	/* Put the address of the phy, and the register
	* number into MIICMD
	*/
	out_le32(&phyregs->miimcmd, (0x1 << 31) \| ((port_addr & 0x1f) << 25) \|
	((regnum & 0x1f) << 20) \| ((value & 0xffff) << 4) \|
	(0x2 << 1));

	timeout = 50000;
	/* Wait for the the indication that the read is done */
	while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout)
	udelay(1);
	if (timeout == 0)
	debug("Timeout waiting for MDIO read\n");

	/* Grab the value read from the PHY */
	value = in_le32(&phyregs->miimdata);

	if ((value & 0x00030000) == 0)
	return value & 0x0000ffff;

	return value;
	}

	static int init_phy(struct eth_device *dev)
	{
	struct vsc9953_port_info *l2sw_port = dev->priv;
	struct phy_device *phydev = NULL;

	#ifdef CONFIG_PHYLIB
	if (!l2sw_port->bus)
	return 0;
	phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev,
	l2sw_port->enet_if);
	if (!phydev) {
	printf("Failed to connect\n");
	return -1;
	}

	phydev->supported &= SUPPORTED_10baseT_Half \|
	SUPPORTED_10baseT_Full \|
	SUPPORTED_100baseT_Half \|
	SUPPORTED_100baseT_Full \|
	SUPPORTED_1000baseT_Full;
	phydev->advertising = phydev->supported;

	l2sw_port->phydev = phydev;

	phy_config(phydev);
	#endif

	return 0;
	}

	static int vsc9953_port_init(int port)
	{
	struct eth_device *dev;

	/* Internal ports never have a PHY */
	if (VSC9953_INTERNAL_PORT_CHECK(port))
	return 0;

	/* alloc eth device */
	dev = (struct eth_device *)calloc(1, sizeof(struct eth_device));
	if (!dev)
	return 1;

	sprintf(dev->name, "SW@PORT%d", port);
	dev->priv = &vsc9953_l2sw.port[port];
	dev->init = NULL;
	dev->halt = NULL;
	dev->send = NULL;
	dev->recv = NULL;

	if (init_phy(dev)) {
	free(dev);
	return 1;
	}

	return 0;
	}

	void vsc9953_init(bd_t *bis)
	{
	u32 i, hdx_cfg = 0, phy_addr = 0;
	int timeout;
	struct vsc9953_system_reg *l2sys_reg;
	struct vsc9953_qsys_reg *l2qsys_reg;
	struct vsc9953_dev_gmii *l2dev_gmii_reg;
	struct vsc9953_analyzer *l2ana_reg;
	struct vsc9953_devcpu_gcb *l2dev_gcb;

	l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET +
	VSC9953_DEV_GMII_OFFSET);

	l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
	VSC9953_ANA_OFFSET);

	l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET +
	VSC9953_SYS_OFFSET);

	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
	VSC9953_QSYS_OFFSET);

	l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET +
	VSC9953_DEVCPU_GCB);

	out_le32(&l2dev_gcb->chip_regs.soft_rst,
	CONFIG_VSC9953_SOFT_SWC_RST_ENA);
	timeout = 50000;
	while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) &
	CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout)
	udelay(1); /* busy wait for vsc9953 soft reset */
	if (timeout == 0)
	debug("Timeout waiting for VSC9953 to reset\n");

	out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE \|
	CONFIG_VSC9953_MEM_INIT);

	timeout = 50000;
	while ((in_le32(&l2sys_reg->sys.reset_cfg) &
	CONFIG_VSC9953_MEM_INIT) && --timeout)
	udelay(1); /* busy wait for vsc9953 memory init */
	if (timeout == 0)
	debug("Timeout waiting for VSC9953 memory to initialize\n");

	out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg)
	\| CONFIG_VSC9953_CORE_ENABLE));

	/* VSC9953 Setting to be done once only */
	out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00);

	for (i = 0; i < VSC9953_MAX_PORTS; i++) {
	if (vsc9953_port_init(i))
	printf("Failed to initialize l2switch port %d\n", i);

	/* Enable VSC9953 GMII Ports Port ID 0 - 7 */
	if (VSC9953_INTERNAL_PORT_CHECK(i)) {
	out_le32(&l2ana_reg->pfc[i].pfc_cfg,
	CONFIG_VSC9953_PFC_FC_QSGMII);
	out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
	CONFIG_VSC9953_MAC_FC_CFG_QSGMII);
	} else {
	out_le32(&l2ana_reg->pfc[i].pfc_cfg,
	CONFIG_VSC9953_PFC_FC);
	out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
	CONFIG_VSC9953_MAC_FC_CFG);
	}
	out_le32(&l2dev_gmii_reg->port_mode.clock_cfg,
	CONFIG_VSC9953_CLOCK_CFG);
	out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg,
	CONFIG_VSC9953_MAC_ENA_CFG);
	out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg,
	CONFIG_VSC9953_MAC_MODE_CFG);
	out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg,
	CONFIG_VSC9953_MAC_IFG_CFG);
	/* mac_hdx_cfg varies with port id*/
	hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG \| (i << 16));
	out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg);
	out_le32(&l2sys_reg->sys.front_port_mode[i],
	CONFIG_VSC9953_FRONT_PORT_MODE);
	out_le32(&l2qsys_reg->sys.switch_port_mode[i],
	CONFIG_VSC9953_PORT_ENA);
	out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg,
	CONFIG_VSC9953_MAC_MAX_LEN);
	out_le32(&l2sys_reg->pause_cfg.pause_cfg[i],
	CONFIG_VSC9953_PAUSE_CFG);
	/* WAIT FOR 2 us*/
	udelay(2);

	l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(
	(char *)l2dev_gmii_reg
	+ T1040_SWITCH_GMII_DEV_OFFSET);

	/* Initialize Lynx PHY Wrappers */
	phy_addr = 0;
	if (vsc9953_l2sw.port[i].enet_if ==
	PHY_INTERFACE_MODE_QSGMII)
	phy_addr = (i + 0x4) & 0x1F;
	else if (vsc9953_l2sw.port[i].enet_if ==
	PHY_INTERFACE_MODE_SGMII)
	phy_addr = (i + 1) & 0x1F;

	if (phy_addr) {
	/* SGMII IF mode + AN enable */
	vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
	0x14, PHY_SGMII_IF_MODE_AN \|
	PHY_SGMII_IF_MODE_SGMII);
	/* Dev ability according to SGMII specification */
	vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
	0x4, PHY_SGMII_DEV_ABILITY_SGMII);
	/* Adjust link timer for SGMII
	* 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40
	*/
	vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
	0x13, 0x0003);
	vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
	0x12, 0x0d40);
	/* Restart AN */
	vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
	0x0, PHY_SGMII_CR_DEF_VAL \|
	PHY_SGMII_CR_RESET_AN);

	timeout = 50000;
	while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0],
	phy_addr, 0x01) & 0x0020) && --timeout)
	udelay(1); /* wait for AN to complete */
	if (timeout == 0)
	debug("Timeout waiting for AN to complete\n");
	}
	}

	printf("VSC9953 L2 switch initialized\n");
	return;
	}

	#ifdef CONFIG_VSC9953_CMD
	/* Enable/disable status of a VSC9953 port */
	static void vsc9953_port_status_set(int port_nr, u8 enabled)
	{
	u32 val;
	struct vsc9953_qsys_reg *l2qsys_reg;

	/* Administrative down */
	if (vsc9953_l2sw.port[port_nr].enabled == 0)
	return;

	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
	VSC9953_QSYS_OFFSET);

	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]);
	if (enabled == 1)
	val \|= (1 << 13);
	else
	val &= ~(1 << 13);

	out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val);
	}

	/* Set all VSC9953 ports' status */
	static void vsc9953_port_all_status_set(u8 enabled)
	{
	int i;

	for (i = 0; i < VSC9953_MAX_PORTS; i++)
	vsc9953_port_status_set(i, enabled);
	}

	/* Start autonegotiation for a VSC9953 PHY */
	static void vsc9953_phy_autoneg(int port_nr)
	{
	if (!vsc9953_l2sw.port[port_nr].phydev)
	return;

	if (vsc9953_l2sw.port[port_nr].phydev->drv->startup(
	vsc9953_l2sw.port[port_nr].phydev))
	printf("Failed to start PHY for port %d\n", port_nr);
	}

	/* Start autonegotiation for all VSC9953 PHYs */
	static void vsc9953_phy_all_autoneg(void)
	{
	int i;

	for (i = 0; i < VSC9953_MAX_PORTS; i++)
	vsc9953_phy_autoneg(i);
	}

	/* Print a VSC9953 port's configuration */
	static void vsc9953_port_config_show(int port)
	{
	int speed;
	int duplex;
	int link;
	u8 enabled;
	u32 val;
	struct vsc9953_qsys_reg *l2qsys_reg;

	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
	VSC9953_QSYS_OFFSET);

	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]);
	enabled = vsc9953_l2sw.port[port].enabled &
	((val & 0x00002000) >> 13);

	/* internal ports (8 and 9) are fixed */
	if (VSC9953_INTERNAL_PORT_CHECK(port)) {
	link = 1;
	speed = SPEED_2500;
	duplex = DUPLEX_FULL;
	} else {
	if (vsc9953_l2sw.port[port].phydev) {
	link = vsc9953_l2sw.port[port].phydev->link;
	speed = vsc9953_l2sw.port[port].phydev->speed;
	duplex = vsc9953_l2sw.port[port].phydev->duplex;
	} else {
	link = -1;
	speed = -1;
	duplex = -1;
	}
	}

	printf("%8d ", port);
	printf("%8s ", enabled == 1 ? "enabled" : "disabled");
	printf("%8s ", link == 1 ? "up" : "down");

	switch (speed) {
	case SPEED_10:
	printf("%8d ", 10);
	break;
	case SPEED_100:
	printf("%8d ", 100);
	break;
	case SPEED_1000:
	printf("%8d ", 1000);
	break;
	case SPEED_2500:
	printf("%8d ", 2500);
	break;
	case SPEED_10000:
	printf("%8d ", 10000);
	break;
	default:
	printf("%8s ", "-");
	}

	printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half");
	}

	/* Print VSC9953 ports' configuration */
	static void vsc9953_port_all_config_show(void)
	{
	int i;

	for (i = 0; i < VSC9953_MAX_PORTS; i++)
	vsc9953_port_config_show(i);
	}

	/* function to interpret commands starting with "ethsw " */
	static int do_ethsw(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	u8 enable;
	u32 port;

	if (argc < 4)
	return -1;

	if (strcmp(argv[1], "port"))
	return -1;

	if (!strcmp(argv[3], "show")) {
	if (!strcmp(argv[2], "all")) {
	vsc9953_phy_all_autoneg();
	printf("%8s %8s %8s %8s %8s\n",
	"Port", "Status", "Link", "Speed",
	"Duplex");
	vsc9953_port_all_config_show();
	return 0;
	} else {
	port = simple_strtoul(argv[2], NULL, 10);
	if (!VSC9953_PORT_CHECK(port))
	return -1;
	vsc9953_phy_autoneg(port);
	printf("%8s %8s %8s %8s %8s\n",
	"Port", "Status", "Link", "Speed",
	"Duplex");
	vsc9953_port_config_show(port);
	return 0;
	}
	} else if (!strcmp(argv[3], "enable")) {
	enable = 1;
	} else if (!strcmp(argv[3], "disable")) {
	enable = 0;
	} else {
	return -1;
	}

	if (!strcmp(argv[2], "all")) {
	vsc9953_port_all_status_set(enable);
	return 0;
	} else {
	port = simple_strtoul(argv[2], NULL, 10);
	if (!VSC9953_PORT_CHECK(port))
	return -1;
	vsc9953_port_status_set(port, enable);
	return 0;
	}

	return -1;
	}

	U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
	"vsc9953 l2 switch commands",
	"port <port_nr> enable\|disable\n"
	" - enable/disable an l2 switch port\n"
	" port_nr=0..9; use \"all\" for all ports\n"
	"ethsw port <port_nr> show\n"
	" - show an l2 switch port's configuration\n"
	" port_nr=0..9; use \"all\" for all ports\n"
	);
	#endif /* CONFIG_VSC9953_CMD */