| /* |
| * (C) Copyright 2005 |
| * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com> |
| * |
| * (C) Copyright 2002 |
| * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| * |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/platform.h> |
| #include <netdev.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) |
| #define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b) |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| |
| /* |
| * Miscelaneous platform dependent initialisations |
| */ |
| int env_flash_cmdline (void) |
| { |
| char *sp = (char *) 0x0201c020; |
| char *ep; |
| int len; |
| |
| /* Check if "erase" push button is depressed */ |
| if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) { |
| printf("### Entering network recovery mode...\n"); |
| setenv("bootargs", "console=ttyAM0,115200 mem=32M initrd=0x400000,8M root=/dev/ram0"); |
| setenv("bootcmd", "bootp 0x400000; gofsk 0x400000"); |
| setenv("bootdelay", "2"); |
| return 0; |
| } |
| |
| /* Check for flash based kernel boot args to use as default */ |
| for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++) |
| ; |
| |
| if ((len > 0) && (len <1024)) |
| setenv("bootargs", sp); |
| |
| return 0; |
| } |
| |
| int board_late_init (void) |
| { |
| return 0; |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| return ks8695_eth_initialize(); |
| } |
| |
| int board_init (void) |
| { |
| /* arch number of CM41xx */ |
| gd->bd->bi_arch_number = 672; |
| |
| /* adress of boot parameters */ |
| gd->bd->bi_boot_params = 0x00000100; |
| |
| /* power down all but port 0 on the switch */ |
| ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005); |
| ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005); |
| |
| return 0; |
| } |
| |
| int dram_init (void) |
| { |
| gd->bd->bi_dram[0].start = PHYS_SDRAM_1; |
| gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; |
| |
| return (0); |
| } |