| /* |
| * Copyright 2008 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * Version 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <fsl_ddr_sdram.h> |
| |
| #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) |
| #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL |
| #endif |
| |
| void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, |
| unsigned int ctrl_num, int step) |
| { |
| unsigned int i; |
| struct ccsr_ddr __iomem *ddr = |
| (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; |
| |
| if (ctrl_num != 0) { |
| printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); |
| return; |
| } |
| |
| for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { |
| if (i == 0) { |
| out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); |
| out_be32(&ddr->cs0_config, regs->cs[i].config); |
| |
| } else if (i == 1) { |
| out_be32(&ddr->cs1_bnds, regs->cs[i].bnds); |
| out_be32(&ddr->cs1_config, regs->cs[i].config); |
| |
| } else if (i == 2) { |
| out_be32(&ddr->cs2_bnds, regs->cs[i].bnds); |
| out_be32(&ddr->cs2_config, regs->cs[i].config); |
| |
| } else if (i == 3) { |
| out_be32(&ddr->cs3_bnds, regs->cs[i].bnds); |
| out_be32(&ddr->cs3_config, regs->cs[i].config); |
| } |
| } |
| |
| out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); |
| out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); |
| out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); |
| out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); |
| #if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541) |
| out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); |
| #endif |
| |
| /* |
| * 200 painful micro-seconds must elapse between |
| * the DDR clock setup and the DDR config enable. |
| */ |
| udelay(200); |
| asm volatile("sync;isync"); |
| |
| out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg); |
| |
| asm("sync;isync;msync"); |
| udelay(500); |
| } |
| |
| #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) |
| /* |
| * Initialize all of memory for ECC, then enable errors. |
| */ |
| |
| void |
| ddr_enable_ecc(unsigned int dram_size) |
| { |
| struct ccsr_ddr __iomem *ddr = |
| (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); |
| |
| dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); |
| |
| /* |
| * Enable errors for ECC. |
| */ |
| debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable); |
| ddr->err_disable = 0x00000000; |
| asm("sync;isync;msync"); |
| debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable); |
| } |
| |
| #endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */ |