| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * NXP lx2160a SOC common device tree source |
| * |
| * Copyright 2018-2020 NXP |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "fsl,lx2160a"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x80000000 0 0x80000000>; |
| /* DRAM space - 1, size : 2 GB DRAM */ |
| }; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| clockgen: clocking@1300000 { |
| compatible = "fsl,ls2080a-clockgen"; |
| reg = <0 0x1300000 0 0xa0000>; |
| #clock-cells = <2>; |
| clocks = <&sysclk>; |
| }; |
| |
| gic: interrupt-controller@6000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ |
| <0x0 0x06200000 0 0x100000>; /* GICR */ |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <1 9 0x4>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ |
| <1 14 0x8>, /* Physical NS PPI, active-low */ |
| <1 11 0x8>, /* Virtual PPI, active-low */ |
| <1 10 0x8>; /* Hypervisor PPI, active-low */ |
| }; |
| |
| fspi: flexspi@20c0000 { |
| compatible = "nxp,lx2160a-fspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x20c0000 0x0 0x10000>, |
| <0x0 0x20000000 0x0 0x10000000>; |
| reg-names = "fspi_base", "fspi_mmap"; |
| clocks = <&clockgen 4 3>, <&clockgen 4 3>; |
| clock-names = "fspi_en", "fspi"; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@2000000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2000000 0x0 0x10000>; |
| interrupts = <0 34 4>; |
| scl-gpio = <&gpio2 15 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2010000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2010000 0x0 0x10000>; |
| interrupts = <0 34 4>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2020000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2020000 0x0 0x10000>; |
| interrupts = <0 35 4>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@2030000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2030000 0x0 0x10000>; |
| interrupts = <0 35 4>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@2040000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2040000 0x0 0x10000>; |
| interrupts = <0 74 4>; |
| scl-gpio = <&gpio2 16 0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@2050000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2050000 0x0 0x10000>; |
| interrupts = <0 74 4>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@2060000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2060000 0x0 0x10000>; |
| interrupts = <0 75 4>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@2070000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2070000 0x0 0x10000>; |
| interrupts = <0 75 4>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@21c0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21c0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@21d0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21d0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@21e0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21e0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@21f0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21f0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| dspi0: dspi@2100000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <0 26 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| dspi1: dspi@2110000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2110000 0x0 0x10000>; |
| interrupts = <0 26 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| dspi2: dspi@2120000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2120000 0x0 0x10000>; |
| interrupts = <0 241 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| gpio0: gpio@2300000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2300000 0x0 0x10000>; |
| interrupts = <0 36 4>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@2310000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2310000 0x0 0x10000>; |
| interrupts = <0 36 4>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2320000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <0 37 4>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@2330000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2330000 0x0 0x10000>; |
| interrupts = <0 37 4>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| watchdog@23a0000 { |
| compatible = "arm,sbsa-gwdt"; |
| reg = <0x0 0x23a0000 0 0x1000>, |
| <0x0 0x2390000 0 0x1000>; |
| timeout-sec = <30>; |
| }; |
| |
| usb0: usb3@3100000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <0 80 0x4>; /* Level high type */ |
| dr_mode = "host"; |
| }; |
| |
| usb1: usb3@3110000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3110000 0x0 0x10000>; |
| interrupts = <0 81 0x4>; /* Level high type */ |
| dr_mode = "host"; |
| }; |
| |
| esdhc0: esdhc@2140000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2140000 0x0 0x10000>; |
| interrupts = <0 28 0x4>; /* Level high type */ |
| clocks = <&clockgen 4 1>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| little-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc1: esdhc@2150000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2150000 0x0 0x10000>; |
| interrupts = <0 63 0x4>; /* Level high type */ |
| clocks = <&clockgen 4 1>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| non-removable; |
| little-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sata0: sata@3200000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>; |
| interrupts = <0 133 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| sata1: sata@3210000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3210000 0x0 0x10000>; |
| interrupts = <0 136 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| sata2: sata@3220000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3220000 0x0 0x10000>; |
| interrupts = <0 97 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| sata3: sata@3230000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3230000 0x0 0x10000>; |
| interrupts = <0 100 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| pcie1: pcie@3400000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03400000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03480000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x034c0000 0x0 0x40000 /* PF control registers */ |
| 0x80 0x00000000 0x0 0x2000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie2: pcie@3500000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03500000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03580000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x035c0000 0x0 0x40000 /* PF control registers */ |
| 0x88 0x00000000 0x0 0x2000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <2>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie3: pcie@3600000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03600000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03680000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x036c0000 0x0 0x40000 /* PF control registers */ |
| 0x90 0x00000000 0x0 0x2000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x90 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie4: pcie@3700000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03700000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03780000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x037c0000 0x0 0x40000 /* PF control registers */ |
| 0x98 0x00000000 0x0 0x2000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x98 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie5: pcie@3800000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03800000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03880000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x038c0000 0x0 0x40000 /* PF control registers */ |
| 0xa0 0x00000000 0x0 0x2000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0xa0 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie6: pcie@3900000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03900000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03980000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x039c0000 0x0 0x40000 /* PF control registers */ |
| 0xa8 0x00000000 0x0 0x2000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0xa8 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| fsl_mc: fsl-mc@80c000000 { |
| compatible = "fsl,qoriq-mc", "simple-mfd"; |
| reg = <0x00000008 0x0c000000 0 0x40>, |
| <0x00000000 0x08340000 0 0x40000>; |
| #address-cells = <3>; |
| #size-cells = <1>; |
| |
| /* |
| * Region type 0x0 - MC portals |
| * Region type 0x1 - QBMAN portals |
| */ |
| ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 |
| 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; |
| |
| dpmacs { |
| compatible = "simple-mfd"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| dpmac1: dpmac@1 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x1>; |
| status = "disabled"; |
| }; |
| |
| dpmac2: dpmac@2 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x2>; |
| status = "disabled"; |
| }; |
| |
| dpmac3: dpmac@3 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x3>; |
| status = "disabled"; |
| }; |
| |
| dpmac4: dpmac@4 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x4>; |
| status = "disabled"; |
| }; |
| |
| dpmac5: dpmac@5 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x5>; |
| status = "disabled"; |
| }; |
| |
| dpmac6: dpmac@6 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x6>; |
| status = "disabled"; |
| }; |
| |
| dpmac7: dpmac@7 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x7>; |
| status = "disabled"; |
| }; |
| |
| dpmac8: dpmac@8 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x8>; |
| status = "disabled"; |
| }; |
| |
| dpmac9: dpmac@9 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x9>; |
| status = "disabled"; |
| }; |
| |
| dpmac10: dpmac@a { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xa>; |
| status = "disabled"; |
| }; |
| |
| dpmac11: dpmac@b { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xb>; |
| status = "disabled"; |
| }; |
| |
| dpmac12: dpmac@c { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xc>; |
| status = "disabled"; |
| }; |
| |
| dpmac13: dpmac@d { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xd>; |
| status = "disabled"; |
| }; |
| |
| dpmac14: dpmac@e { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xe>; |
| status = "disabled"; |
| }; |
| |
| dpmac15: dpmac@f { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xf>; |
| status = "disabled"; |
| }; |
| |
| dpmac16: dpmac@10 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x10>; |
| status = "disabled"; |
| }; |
| |
| dpmac17: dpmac@11 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x11>; |
| status = "disabled"; |
| }; |
| |
| dpmac18: dpmac@12 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x12>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ |
| emdio1: mdio@8b96000 { |
| compatible = "fsl,ls-mdio"; |
| reg = <0x0 0x8b96000 0x0 0x1000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */ |
| emdio2: mdio@8b97000 { |
| compatible = "fsl,ls-mdio"; |
| reg = <0x0 0x8b97000 0x0 0x1000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| }; |
| }; |