| /* |
| * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com |
| * |
| * Developed for DENX Software Engineering GmbH |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| |
| /* This test performs testing of FPGA SCRATCH register, |
| * gets FPGA version and run get_ram_size() on FPGA memory |
| */ |
| |
| #include <post.h> |
| #include <watchdog.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define FPGA_SCRATCH_REG 0xC4000050 |
| #define FPGA_VERSION_REG 0xC4000040 |
| #define FPGA_RAM_START 0xC4200000 |
| #define FPGA_RAM_END 0xC4203FFF |
| #define FPGA_STAT 0xC400000C |
| #define FPGA_BUFFER 0x00800000 |
| #define FPGA_RAM_SIZE (FPGA_RAM_END - FPGA_RAM_START + 1) |
| |
| #if CONFIG_POST & CONFIG_SYS_POST_BSPEC3 |
| |
| const static unsigned long pattern[] = { |
| 0xffffffff, |
| 0xaaaaaaaa, |
| 0xcccccccc, |
| 0xf0f0f0f0, |
| 0xff00ff00, |
| 0xffff0000, |
| 0x0000ffff, |
| 0x00ff00ff, |
| 0x0f0f0f0f, |
| 0x33333333, |
| 0x55555555, |
| 0x00000000, |
| }; |
| |
| const static unsigned long otherpattern = 0x01234567; |
| |
| static int one_scratch_test(uint value) |
| { |
| uint read_value; |
| int ret = 0; |
| |
| out_be32((void *)FPGA_SCRATCH_REG, value); |
| /* read other location (protect against data lines capacity) */ |
| ret = in_be16((void *)FPGA_VERSION_REG); |
| /* verify test pattern */ |
| read_value = in_be32((void *)FPGA_SCRATCH_REG); |
| if (read_value != value) { |
| post_log("FPGA SCRATCH test failed write %08X, read %08X\n", |
| value, read_value); |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| |
| static int fpga_post_test1(ulong *start, ulong size, ulong val) |
| { |
| int ret = 0; |
| ulong i = 0; |
| ulong *mem = start; |
| ulong readback; |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| mem[i] = val; |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| readback = mem[i]; |
| if (readback != val) { |
| post_log("FPGA Memory error at %08x, " |
| "wrote %08x, read %08x !\n", |
| mem + i, val, readback); |
| ret = -1; |
| break; |
| } |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| return ret; |
| } |
| |
| static int fpga_post_test2(ulong *start, ulong size) |
| { |
| int ret = 0; |
| ulong i = 0; |
| ulong *mem = start; |
| ulong readback; |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| mem[i] = 1 << (i % 32); |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| readback = mem[i]; |
| if (readback != 1 << (i % 32)) { |
| post_log("FPGA Memory error at %08x, " |
| "wrote %08x, read %08x !\n", |
| mem + i, 1 << (i % 32), readback); |
| ret = -1; |
| break; |
| } |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| return ret; |
| } |
| |
| static int fpga_post_test3(ulong *start, ulong size) |
| { |
| int ret = 0; |
| ulong i = 0; |
| ulong *mem = start; |
| ulong readback; |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| mem[i] = i; |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| readback = mem[i]; |
| if (readback != i) { |
| post_log("FPGA Memory error at %08x, " |
| "wrote %08x, read %08x !\n", |
| mem + i, i, readback); |
| ret = -1; |
| break; |
| } |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| return ret; |
| } |
| |
| static int fpga_post_test4(ulong *start, ulong size) |
| { |
| int ret = 0; |
| ulong i = 0; |
| ulong *mem = start; |
| ulong readback; |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| mem[i] = ~i; |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| for (i = 0; i < size / sizeof(ulong); i++) { |
| readback = mem[i]; |
| if (readback != ~i) { |
| post_log("FPGA Memory error at %08x, " |
| "wrote %08x, read %08x !\n", |
| mem + i, ~i, readback); |
| ret = -1; |
| break; |
| } |
| if (i % 1024 == 0) |
| WATCHDOG_RESET(); |
| } |
| |
| return ret; |
| } |
| |
| /* FPGA Memory-pattern-test */ |
| static int fpga_mem_test(void) |
| { |
| int ret = 0; |
| ulong* start = (ulong *)FPGA_RAM_START; |
| ulong size = FPGA_RAM_SIZE; |
| |
| if (ret == 0) |
| ret = fpga_post_test1(start, size, 0x00000000); |
| |
| if (ret == 0) |
| ret = fpga_post_test1(start, size, 0xffffffff); |
| |
| if (ret == 0) |
| ret = fpga_post_test1(start, size, 0x55555555); |
| |
| if (ret == 0) |
| ret = fpga_post_test1(start, size, 0xaaaaaaaa); |
| |
| WATCHDOG_RESET(); |
| |
| if (ret == 0) |
| ret = fpga_post_test2(start, size); |
| |
| if (ret == 0) |
| ret = fpga_post_test3(start, size); |
| |
| if (ret == 0) |
| ret = fpga_post_test4(start, size); |
| |
| return ret; |
| } |
| |
| /* Verify FPGA addresslines */ |
| static int fpga_post_addrline(ulong *address, ulong *base, ulong size) |
| { |
| unsigned long *target; |
| unsigned long *end; |
| unsigned long readback; |
| unsigned long xor; |
| int ret = 0; |
| |
| end = (ulong *)((ulong)base + size); |
| xor = 0; |
| |
| for (xor = sizeof(ulong); xor > 0; xor <<= 1) { |
| target = (ulong*)((ulong)address ^ xor); |
| if ((target >= base) && (target < end)) { |
| *address = ~*target; |
| readback = *target; |
| |
| if (readback == *address) { |
| post_log("Memory (address line) error at %08x" |
| "XOR value %08x !\n", |
| address, target, xor); |
| ret = -1; |
| break; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* Verify FPGA addresslines */ |
| static int fpga_post_dataline(ulong *address) |
| { |
| unsigned long temp32 = 0; |
| int i = 0; |
| int ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(pattern); i++) { |
| *address = pattern[i]; |
| /* |
| * Put a different pattern on the data lines: otherwise they |
| * may float long enough to read back what we wrote. |
| */ |
| *(address + 1) = otherpattern; |
| temp32 = *address; |
| |
| if (temp32 != pattern[i]){ |
| post_log("Memory (date line) error at %08x, " |
| "wrote %08x, read %08x !\n", |
| address, pattern[i], temp32); |
| ret = 1; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* Verify FPGA, get version & memory size */ |
| int fpga_post_test(int flags) |
| { |
| uint old_value; |
| uint version; |
| uint read_value; |
| int ret = 0; |
| |
| post_log("\n"); |
| old_value = in_be32((void *)FPGA_SCRATCH_REG); |
| |
| if (one_scratch_test(0x55555555)) |
| ret = 1; |
| if (one_scratch_test(0xAAAAAAAA)) |
| ret = 1; |
| |
| out_be32((void *)FPGA_SCRATCH_REG, old_value); |
| |
| version = in_be32((void *)FPGA_VERSION_REG); |
| post_log("FPGA version %u.%u\n", |
| (version >> 8) & 0xFF, version & 0xFF); |
| |
| /* Enable write to FPGA RAM */ |
| out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000); |
| |
| /* get RAM size */ |
| read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, FPGA_RAM_SIZE); |
| post_log("FPGA RAM size %d bytes\n", read_value); |
| WATCHDOG_RESET(); |
| |
| /* copy fpga memory to DDR2 RAM*/ |
| memcpy((void *)FPGA_BUFFER,(void *)FPGA_RAM_START, FPGA_RAM_SIZE); |
| WATCHDOG_RESET(); |
| |
| /* Test datalines */ |
| if (fpga_post_dataline((ulong *)FPGA_RAM_START)) { |
| ret = 1; |
| goto out; |
| } |
| WATCHDOG_RESET(); |
| |
| /* Test addresslines */ |
| if (fpga_post_addrline((ulong *)FPGA_RAM_START, |
| (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) { |
| ret = 1; |
| goto out; |
| } |
| WATCHDOG_RESET(); |
| if (fpga_post_addrline((ulong *)FPGA_RAM_END - sizeof(long), |
| (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) { |
| ret = 1; |
| goto out; |
| } |
| WATCHDOG_RESET(); |
| |
| /* Memory Pattern Test */ |
| if (fpga_mem_test()) { |
| ret = 1; |
| goto out; |
| } |
| WATCHDOG_RESET(); |
| |
| /* restore memory */ |
| memcpy((void *)FPGA_RAM_START,(void *)FPGA_BUFFER, FPGA_RAM_SIZE); |
| WATCHDOG_RESET(); |
| |
| out: |
| /* Disable write to RAM */ |
| out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) & 0xEFFF); |
| return ret; |
| } |
| |
| #endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC3 */ |