| /* |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * (C) Copyright 2009 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * (C) Copyright 2010-2011 |
| * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| /* for linking errors see |
| * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ |
| |
| #ifndef _CONFIG_MGCOGE3UN_H |
| #define _CONFIG_MGCOGE3UN_H |
| |
| /* include common defines/options for all arm based Keymile boards */ |
| #include "km/km_arm.h" |
| |
| /* |
| * Version number information |
| */ |
| #define CONFIG_IDENT_STRING "\nKeymile MGCOGE3UN" |
| #define CONFIG_HOSTNAME mgcoge3un |
| #define CONFIG_MGCOGE3UN |
| |
| #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ |
| #define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ |
| |
| /* we use a new RAM type on mgcoge3un board */ |
| #undef CONFIG_SYS_KWD_CONFIG |
| #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg |
| |
| /* |
| * mgcoge3un has a fixed link to the marvell switch |
| * with 100MB full duplex and autoneg off, for this |
| * reason we have to change the default settings |
| */ |
| #define PORT_SERIAL_CONTROL_VALUE ( \ |
| MVGBE_FORCE_LINK_PASS | \ |
| MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ |
| MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ |
| MVGBE_ADV_NO_FLOW_CTRL | \ |
| MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ |
| MVGBE_FORCE_BP_MODE_NO_JAM | \ |
| (1 << 9) /* Reserved bit has to be 1 */ | \ |
| MVGBE_DO_NOT_FORCE_LINK_FAIL | \ |
| MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ |
| MVGBE_DTE_ADV_0 | \ |
| MVGBE_MIIPHY_MAC_MODE | \ |
| MVGBE_AUTO_NEG_NO_CHANGE | \ |
| MVGBE_MAX_RX_PACKET_1552BYTE | \ |
| MVGBE_CLR_EXT_LOOPBACK | \ |
| MVGBE_SET_FULL_DUPLEX_MODE | \ |
| MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ |
| MVGBE_SET_GMII_SPEED_TO_10_100 |\ |
| MVGBE_SET_MII_SPEED_TO_100) |
| |
| #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" |
| |
| /* |
| * PCIe port not used on mgcoge3un |
| */ |
| #undef CONFIG_KIRKWOOD_PCIE_INIT |
| |
| #endif /* _CONFIG_MGCOGE3UN_H */ |