| #include <common.h> |
| |
| #ifdef CONFIG_SANDBOX |
| #define DEBUG |
| #endif |
| |
| #include <malloc.h> |
| #include <asm/io.h> |
| |
| #ifdef DEBUG |
| #if __STD_C |
| static void malloc_update_mallinfo (void); |
| void malloc_stats (void); |
| #else |
| static void malloc_update_mallinfo (); |
| void malloc_stats(); |
| #endif |
| #endif /* DEBUG */ |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| Emulation of sbrk for WIN32 |
| All code within the ifdef WIN32 is untested by me. |
| |
| Thanks to Martin Fong and others for supplying this. |
| */ |
| |
| |
| #ifdef WIN32 |
| |
| #define AlignPage(add) (((add) + (malloc_getpagesize-1)) & \ |
| ~(malloc_getpagesize-1)) |
| #define AlignPage64K(add) (((add) + (0x10000 - 1)) & ~(0x10000 - 1)) |
| |
| /* resrve 64MB to insure large contiguous space */ |
| #define RESERVED_SIZE (1024*1024*64) |
| #define NEXT_SIZE (2048*1024) |
| #define TOP_MEMORY ((unsigned long)2*1024*1024*1024) |
| |
| struct GmListElement; |
| typedef struct GmListElement GmListElement; |
| |
| struct GmListElement |
| { |
| GmListElement* next; |
| void* base; |
| }; |
| |
| static GmListElement* head = 0; |
| static unsigned int gNextAddress = 0; |
| static unsigned int gAddressBase = 0; |
| static unsigned int gAllocatedSize = 0; |
| |
| static |
| GmListElement* makeGmListElement (void* bas) |
| { |
| GmListElement* this; |
| this = (GmListElement*)(void*)LocalAlloc (0, sizeof (GmListElement)); |
| assert (this); |
| if (this) |
| { |
| this->base = bas; |
| this->next = head; |
| head = this; |
| } |
| return this; |
| } |
| |
| void gcleanup () |
| { |
| BOOL rval; |
| assert ( (head == NULL) || (head->base == (void*)gAddressBase)); |
| if (gAddressBase && (gNextAddress - gAddressBase)) |
| { |
| rval = VirtualFree ((void*)gAddressBase, |
| gNextAddress - gAddressBase, |
| MEM_DECOMMIT); |
| assert (rval); |
| } |
| while (head) |
| { |
| GmListElement* next = head->next; |
| rval = VirtualFree (head->base, 0, MEM_RELEASE); |
| assert (rval); |
| LocalFree (head); |
| head = next; |
| } |
| } |
| |
| static |
| void* findRegion (void* start_address, unsigned long size) |
| { |
| MEMORY_BASIC_INFORMATION info; |
| if (size >= TOP_MEMORY) return NULL; |
| |
| while ((unsigned long)start_address + size < TOP_MEMORY) |
| { |
| VirtualQuery (start_address, &info, sizeof (info)); |
| if ((info.State == MEM_FREE) && (info.RegionSize >= size)) |
| return start_address; |
| else |
| { |
| /* Requested region is not available so see if the */ |
| /* next region is available. Set 'start_address' */ |
| /* to the next region and call 'VirtualQuery()' */ |
| /* again. */ |
| |
| start_address = (char*)info.BaseAddress + info.RegionSize; |
| |
| /* Make sure we start looking for the next region */ |
| /* on the *next* 64K boundary. Otherwise, even if */ |
| /* the new region is free according to */ |
| /* 'VirtualQuery()', the subsequent call to */ |
| /* 'VirtualAlloc()' (which follows the call to */ |
| /* this routine in 'wsbrk()') will round *down* */ |
| /* the requested address to a 64K boundary which */ |
| /* we already know is an address in the */ |
| /* unavailable region. Thus, the subsequent call */ |
| /* to 'VirtualAlloc()' will fail and bring us back */ |
| /* here, causing us to go into an infinite loop. */ |
| |
| start_address = |
| (void *) AlignPage64K((unsigned long) start_address); |
| } |
| } |
| return NULL; |
| |
| } |
| |
| |
| void* wsbrk (long size) |
| { |
| void* tmp; |
| if (size > 0) |
| { |
| if (gAddressBase == 0) |
| { |
| gAllocatedSize = max (RESERVED_SIZE, AlignPage (size)); |
| gNextAddress = gAddressBase = |
| (unsigned int)VirtualAlloc (NULL, gAllocatedSize, |
| MEM_RESERVE, PAGE_NOACCESS); |
| } else if (AlignPage (gNextAddress + size) > (gAddressBase + |
| gAllocatedSize)) |
| { |
| long new_size = max (NEXT_SIZE, AlignPage (size)); |
| void* new_address = (void*)(gAddressBase+gAllocatedSize); |
| do |
| { |
| new_address = findRegion (new_address, new_size); |
| |
| if (new_address == 0) |
| return (void*)-1; |
| |
| gAddressBase = gNextAddress = |
| (unsigned int)VirtualAlloc (new_address, new_size, |
| MEM_RESERVE, PAGE_NOACCESS); |
| /* repeat in case of race condition */ |
| /* The region that we found has been snagged */ |
| /* by another thread */ |
| } |
| while (gAddressBase == 0); |
| |
| assert (new_address == (void*)gAddressBase); |
| |
| gAllocatedSize = new_size; |
| |
| if (!makeGmListElement ((void*)gAddressBase)) |
| return (void*)-1; |
| } |
| if ((size + gNextAddress) > AlignPage (gNextAddress)) |
| { |
| void* res; |
| res = VirtualAlloc ((void*)AlignPage (gNextAddress), |
| (size + gNextAddress - |
| AlignPage (gNextAddress)), |
| MEM_COMMIT, PAGE_READWRITE); |
| if (res == 0) |
| return (void*)-1; |
| } |
| tmp = (void*)gNextAddress; |
| gNextAddress = (unsigned int)tmp + size; |
| return tmp; |
| } |
| else if (size < 0) |
| { |
| unsigned int alignedGoal = AlignPage (gNextAddress + size); |
| /* Trim by releasing the virtual memory */ |
| if (alignedGoal >= gAddressBase) |
| { |
| VirtualFree ((void*)alignedGoal, gNextAddress - alignedGoal, |
| MEM_DECOMMIT); |
| gNextAddress = gNextAddress + size; |
| return (void*)gNextAddress; |
| } |
| else |
| { |
| VirtualFree ((void*)gAddressBase, gNextAddress - gAddressBase, |
| MEM_DECOMMIT); |
| gNextAddress = gAddressBase; |
| return (void*)-1; |
| } |
| } |
| else |
| { |
| return (void*)gNextAddress; |
| } |
| } |
| |
| #endif |
| |
| |
| |
| /* |
| Type declarations |
| */ |
| |
| |
| struct malloc_chunk |
| { |
| INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */ |
| INTERNAL_SIZE_T size; /* Size in bytes, including overhead. */ |
| struct malloc_chunk* fd; /* double links -- used only if free. */ |
| struct malloc_chunk* bk; |
| } __attribute__((__may_alias__)) ; |
| |
| typedef struct malloc_chunk* mchunkptr; |
| |
| /* |
| |
| malloc_chunk details: |
| |
| (The following includes lightly edited explanations by Colin Plumb.) |
| |
| Chunks of memory are maintained using a `boundary tag' method as |
| described in e.g., Knuth or Standish. (See the paper by Paul |
| Wilson ftp://ftp.cs.utexas.edu/pub/garbage/allocsrv.ps for a |
| survey of such techniques.) Sizes of free chunks are stored both |
| in the front of each chunk and at the end. This makes |
| consolidating fragmented chunks into bigger chunks very fast. The |
| size fields also hold bits representing whether chunks are free or |
| in use. |
| |
| An allocated chunk looks like this: |
| |
| |
| chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Size of previous chunk, if allocated | | |
| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Size of chunk, in bytes |P| |
| mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | User data starts here... . |
| . . |
| . (malloc_usable_space() bytes) . |
| . | |
| nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Size of chunk | |
| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| |
| |
| Where "chunk" is the front of the chunk for the purpose of most of |
| the malloc code, but "mem" is the pointer that is returned to the |
| user. "Nextchunk" is the beginning of the next contiguous chunk. |
| |
| Chunks always begin on even word boundries, so the mem portion |
| (which is returned to the user) is also on an even word boundary, and |
| thus double-word aligned. |
| |
| Free chunks are stored in circular doubly-linked lists, and look like this: |
| |
| chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Size of previous chunk | |
| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| `head:' | Size of chunk, in bytes |P| |
| mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Forward pointer to next chunk in list | |
| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Back pointer to previous chunk in list | |
| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | Unused space (may be 0 bytes long) . |
| . . |
| . | |
| nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| `foot:' | Size of chunk, in bytes | |
| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| |
| The P (PREV_INUSE) bit, stored in the unused low-order bit of the |
| chunk size (which is always a multiple of two words), is an in-use |
| bit for the *previous* chunk. If that bit is *clear*, then the |
| word before the current chunk size contains the previous chunk |
| size, and can be used to find the front of the previous chunk. |
| (The very first chunk allocated always has this bit set, |
| preventing access to non-existent (or non-owned) memory.) |
| |
| Note that the `foot' of the current chunk is actually represented |
| as the prev_size of the NEXT chunk. (This makes it easier to |
| deal with alignments etc). |
| |
| The two exceptions to all this are |
| |
| 1. The special chunk `top', which doesn't bother using the |
| trailing size field since there is no |
| next contiguous chunk that would have to index off it. (After |
| initialization, `top' is forced to always exist. If it would |
| become less than MINSIZE bytes long, it is replenished via |
| malloc_extend_top.) |
| |
| 2. Chunks allocated via mmap, which have the second-lowest-order |
| bit (IS_MMAPPED) set in their size fields. Because they are |
| never merged or traversed from any other chunk, they have no |
| foot size or inuse information. |
| |
| Available chunks are kept in any of several places (all declared below): |
| |
| * `av': An array of chunks serving as bin headers for consolidated |
| chunks. Each bin is doubly linked. The bins are approximately |
| proportionally (log) spaced. There are a lot of these bins |
| (128). This may look excessive, but works very well in |
| practice. All procedures maintain the invariant that no |
| consolidated chunk physically borders another one. Chunks in |
| bins are kept in size order, with ties going to the |
| approximately least recently used chunk. |
| |
| The chunks in each bin are maintained in decreasing sorted order by |
| size. This is irrelevant for the small bins, which all contain |
| the same-sized chunks, but facilitates best-fit allocation for |
| larger chunks. (These lists are just sequential. Keeping them in |
| order almost never requires enough traversal to warrant using |
| fancier ordered data structures.) Chunks of the same size are |
| linked with the most recently freed at the front, and allocations |
| are taken from the back. This results in LRU or FIFO allocation |
| order, which tends to give each chunk an equal opportunity to be |
| consolidated with adjacent freed chunks, resulting in larger free |
| chunks and less fragmentation. |
| |
| * `top': The top-most available chunk (i.e., the one bordering the |
| end of available memory) is treated specially. It is never |
| included in any bin, is used only if no other chunk is |
| available, and is released back to the system if it is very |
| large (see M_TRIM_THRESHOLD). |
| |
| * `last_remainder': A bin holding only the remainder of the |
| most recently split (non-top) chunk. This bin is checked |
| before other non-fitting chunks, so as to provide better |
| locality for runs of sequentially allocated chunks. |
| |
| * Implicitly, through the host system's memory mapping tables. |
| If supported, requests greater than a threshold are usually |
| serviced via calls to mmap, and then later released via munmap. |
| |
| */ |
| |
| /* sizes, alignments */ |
| |
| #define SIZE_SZ (sizeof(INTERNAL_SIZE_T)) |
| #define MALLOC_ALIGNMENT (SIZE_SZ + SIZE_SZ) |
| #define MALLOC_ALIGN_MASK (MALLOC_ALIGNMENT - 1) |
| #define MINSIZE (sizeof(struct malloc_chunk)) |
| |
| /* conversion from malloc headers to user pointers, and back */ |
| |
| #define chunk2mem(p) ((Void_t*)((char*)(p) + 2*SIZE_SZ)) |
| #define mem2chunk(mem) ((mchunkptr)((char*)(mem) - 2*SIZE_SZ)) |
| |
| /* pad request bytes into a usable size */ |
| |
| #define request2size(req) \ |
| (((long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \ |
| (long)(MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \ |
| (((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK))) |
| |
| /* Check if m has acceptable alignment */ |
| |
| #define aligned_OK(m) (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0) |
| |
| |
| |
| |
| /* |
| Physical chunk operations |
| */ |
| |
| |
| /* size field is or'ed with PREV_INUSE when previous adjacent chunk in use */ |
| |
| #define PREV_INUSE 0x1 |
| |
| /* size field is or'ed with IS_MMAPPED if the chunk was obtained with mmap() */ |
| |
| #define IS_MMAPPED 0x2 |
| |
| /* Bits to mask off when extracting size */ |
| |
| #define SIZE_BITS (PREV_INUSE|IS_MMAPPED) |
| |
| |
| /* Ptr to next physical malloc_chunk. */ |
| |
| #define next_chunk(p) ((mchunkptr)( ((char*)(p)) + ((p)->size & ~PREV_INUSE) )) |
| |
| /* Ptr to previous physical malloc_chunk */ |
| |
| #define prev_chunk(p)\ |
| ((mchunkptr)( ((char*)(p)) - ((p)->prev_size) )) |
| |
| |
| /* Treat space at ptr + offset as a chunk */ |
| |
| #define chunk_at_offset(p, s) ((mchunkptr)(((char*)(p)) + (s))) |
| |
| |
| |
| |
| /* |
| Dealing with use bits |
| */ |
| |
| /* extract p's inuse bit */ |
| |
| #define inuse(p)\ |
| ((((mchunkptr)(((char*)(p))+((p)->size & ~PREV_INUSE)))->size) & PREV_INUSE) |
| |
| /* extract inuse bit of previous chunk */ |
| |
| #define prev_inuse(p) ((p)->size & PREV_INUSE) |
| |
| /* check for mmap()'ed chunk */ |
| |
| #define chunk_is_mmapped(p) ((p)->size & IS_MMAPPED) |
| |
| /* set/clear chunk as in use without otherwise disturbing */ |
| |
| #define set_inuse(p)\ |
| ((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size |= PREV_INUSE |
| |
| #define clear_inuse(p)\ |
| ((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size &= ~(PREV_INUSE) |
| |
| /* check/set/clear inuse bits in known places */ |
| |
| #define inuse_bit_at_offset(p, s)\ |
| (((mchunkptr)(((char*)(p)) + (s)))->size & PREV_INUSE) |
| |
| #define set_inuse_bit_at_offset(p, s)\ |
| (((mchunkptr)(((char*)(p)) + (s)))->size |= PREV_INUSE) |
| |
| #define clear_inuse_bit_at_offset(p, s)\ |
| (((mchunkptr)(((char*)(p)) + (s)))->size &= ~(PREV_INUSE)) |
| |
| |
| |
| |
| /* |
| Dealing with size fields |
| */ |
| |
| /* Get size, ignoring use bits */ |
| |
| #define chunksize(p) ((p)->size & ~(SIZE_BITS)) |
| |
| /* Set size at head, without disturbing its use bit */ |
| |
| #define set_head_size(p, s) ((p)->size = (((p)->size & PREV_INUSE) | (s))) |
| |
| /* Set size/use ignoring previous bits in header */ |
| |
| #define set_head(p, s) ((p)->size = (s)) |
| |
| /* Set size at footer (only when chunk is not in use) */ |
| |
| #define set_foot(p, s) (((mchunkptr)((char*)(p) + (s)))->prev_size = (s)) |
| |
| |
| |
| |
| |
| /* |
| Bins |
| |
| The bins, `av_' are an array of pairs of pointers serving as the |
| heads of (initially empty) doubly-linked lists of chunks, laid out |
| in a way so that each pair can be treated as if it were in a |
| malloc_chunk. (This way, the fd/bk offsets for linking bin heads |
| and chunks are the same). |
| |
| Bins for sizes < 512 bytes contain chunks of all the same size, spaced |
| 8 bytes apart. Larger bins are approximately logarithmically |
| spaced. (See the table below.) The `av_' array is never mentioned |
| directly in the code, but instead via bin access macros. |
| |
| Bin layout: |
| |
| 64 bins of size 8 |
| 32 bins of size 64 |
| 16 bins of size 512 |
| 8 bins of size 4096 |
| 4 bins of size 32768 |
| 2 bins of size 262144 |
| 1 bin of size what's left |
| |
| There is actually a little bit of slop in the numbers in bin_index |
| for the sake of speed. This makes no difference elsewhere. |
| |
| The special chunks `top' and `last_remainder' get their own bins, |
| (this is implemented via yet more trickery with the av_ array), |
| although `top' is never properly linked to its bin since it is |
| always handled specially. |
| |
| */ |
| |
| #define NAV 128 /* number of bins */ |
| |
| typedef struct malloc_chunk* mbinptr; |
| |
| /* access macros */ |
| |
| #define bin_at(i) ((mbinptr)((char*)&(av_[2*(i) + 2]) - 2*SIZE_SZ)) |
| #define next_bin(b) ((mbinptr)((char*)(b) + 2 * sizeof(mbinptr))) |
| #define prev_bin(b) ((mbinptr)((char*)(b) - 2 * sizeof(mbinptr))) |
| |
| /* |
| The first 2 bins are never indexed. The corresponding av_ cells are instead |
| used for bookkeeping. This is not to save space, but to simplify |
| indexing, maintain locality, and avoid some initialization tests. |
| */ |
| |
| #define top (av_[2]) /* The topmost chunk */ |
| #define last_remainder (bin_at(1)) /* remainder from last split */ |
| |
| |
| /* |
| Because top initially points to its own bin with initial |
| zero size, thus forcing extension on the first malloc request, |
| we avoid having any special code in malloc to check whether |
| it even exists yet. But we still need to in malloc_extend_top. |
| */ |
| |
| #define initial_top ((mchunkptr)(bin_at(0))) |
| |
| /* Helper macro to initialize bins */ |
| |
| #define IAV(i) bin_at(i), bin_at(i) |
| |
| static mbinptr av_[NAV * 2 + 2] = { |
| NULL, NULL, |
| IAV(0), IAV(1), IAV(2), IAV(3), IAV(4), IAV(5), IAV(6), IAV(7), |
| IAV(8), IAV(9), IAV(10), IAV(11), IAV(12), IAV(13), IAV(14), IAV(15), |
| IAV(16), IAV(17), IAV(18), IAV(19), IAV(20), IAV(21), IAV(22), IAV(23), |
| IAV(24), IAV(25), IAV(26), IAV(27), IAV(28), IAV(29), IAV(30), IAV(31), |
| IAV(32), IAV(33), IAV(34), IAV(35), IAV(36), IAV(37), IAV(38), IAV(39), |
| IAV(40), IAV(41), IAV(42), IAV(43), IAV(44), IAV(45), IAV(46), IAV(47), |
| IAV(48), IAV(49), IAV(50), IAV(51), IAV(52), IAV(53), IAV(54), IAV(55), |
| IAV(56), IAV(57), IAV(58), IAV(59), IAV(60), IAV(61), IAV(62), IAV(63), |
| IAV(64), IAV(65), IAV(66), IAV(67), IAV(68), IAV(69), IAV(70), IAV(71), |
| IAV(72), IAV(73), IAV(74), IAV(75), IAV(76), IAV(77), IAV(78), IAV(79), |
| IAV(80), IAV(81), IAV(82), IAV(83), IAV(84), IAV(85), IAV(86), IAV(87), |
| IAV(88), IAV(89), IAV(90), IAV(91), IAV(92), IAV(93), IAV(94), IAV(95), |
| IAV(96), IAV(97), IAV(98), IAV(99), IAV(100), IAV(101), IAV(102), IAV(103), |
| IAV(104), IAV(105), IAV(106), IAV(107), IAV(108), IAV(109), IAV(110), IAV(111), |
| IAV(112), IAV(113), IAV(114), IAV(115), IAV(116), IAV(117), IAV(118), IAV(119), |
| IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127) |
| }; |
| |
| #ifdef CONFIG_NEEDS_MANUAL_RELOC |
| static void malloc_bin_reloc(void) |
| { |
| mbinptr *p = &av_[2]; |
| size_t i; |
| |
| for (i = 2; i < ARRAY_SIZE(av_); ++i, ++p) |
| *p = (mbinptr)((ulong)*p + gd->reloc_off); |
| } |
| #else |
| static inline void malloc_bin_reloc(void) {} |
| #endif |
| |
| ulong mem_malloc_start = 0; |
| ulong mem_malloc_end = 0; |
| ulong mem_malloc_brk = 0; |
| |
| void *sbrk(ptrdiff_t increment) |
| { |
| ulong old = mem_malloc_brk; |
| ulong new = old + increment; |
| |
| /* |
| * if we are giving memory back make sure we clear it out since |
| * we set MORECORE_CLEARS to 1 |
| */ |
| if (increment < 0) |
| memset((void *)new, 0, -increment); |
| |
| if ((new < mem_malloc_start) || (new > mem_malloc_end)) |
| return (void *)MORECORE_FAILURE; |
| |
| mem_malloc_brk = new; |
| |
| return (void *)old; |
| } |
| |
| void mem_malloc_init(ulong start, ulong size) |
| { |
| mem_malloc_start = start; |
| mem_malloc_end = start + size; |
| mem_malloc_brk = start; |
| |
| debug("using memory %#lx-%#lx for malloc()\n", mem_malloc_start, |
| mem_malloc_end); |
| #ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT |
| memset((void *)mem_malloc_start, 0x0, size); |
| #endif |
| malloc_bin_reloc(); |
| } |
| |
| /* field-extraction macros */ |
| |
| #define first(b) ((b)->fd) |
| #define last(b) ((b)->bk) |
| |
| /* |
| Indexing into bins |
| */ |
| |
| #define bin_index(sz) \ |
| (((((unsigned long)(sz)) >> 9) == 0) ? (((unsigned long)(sz)) >> 3): \ |
| ((((unsigned long)(sz)) >> 9) <= 4) ? 56 + (((unsigned long)(sz)) >> 6): \ |
| ((((unsigned long)(sz)) >> 9) <= 20) ? 91 + (((unsigned long)(sz)) >> 9): \ |
| ((((unsigned long)(sz)) >> 9) <= 84) ? 110 + (((unsigned long)(sz)) >> 12): \ |
| ((((unsigned long)(sz)) >> 9) <= 340) ? 119 + (((unsigned long)(sz)) >> 15): \ |
| ((((unsigned long)(sz)) >> 9) <= 1364) ? 124 + (((unsigned long)(sz)) >> 18): \ |
| 126) |
| /* |
| bins for chunks < 512 are all spaced 8 bytes apart, and hold |
| identically sized chunks. This is exploited in malloc. |
| */ |
| |
| #define MAX_SMALLBIN 63 |
| #define MAX_SMALLBIN_SIZE 512 |
| #define SMALLBIN_WIDTH 8 |
| |
| #define smallbin_index(sz) (((unsigned long)(sz)) >> 3) |
| |
| /* |
| Requests are `small' if both the corresponding and the next bin are small |
| */ |
| |
| #define is_small_request(nb) (nb < MAX_SMALLBIN_SIZE - SMALLBIN_WIDTH) |
| |
| |
| |
| /* |
| To help compensate for the large number of bins, a one-level index |
| structure is used for bin-by-bin searching. `binblocks' is a |
| one-word bitvector recording whether groups of BINBLOCKWIDTH bins |
| have any (possibly) non-empty bins, so they can be skipped over |
| all at once during during traversals. The bits are NOT always |
| cleared as soon as all bins in a block are empty, but instead only |
| when all are noticed to be empty during traversal in malloc. |
| */ |
| |
| #define BINBLOCKWIDTH 4 /* bins per block */ |
| |
| #define binblocks_r ((INTERNAL_SIZE_T)av_[1]) /* bitvector of nonempty blocks */ |
| #define binblocks_w (av_[1]) |
| |
| /* bin<->block macros */ |
| |
| #define idx2binblock(ix) ((unsigned)1 << (ix / BINBLOCKWIDTH)) |
| #define mark_binblock(ii) (binblocks_w = (mbinptr)(binblocks_r | idx2binblock(ii))) |
| #define clear_binblock(ii) (binblocks_w = (mbinptr)(binblocks_r & ~(idx2binblock(ii)))) |
| |
| |
| |
| |
| |
| /* Other static bookkeeping data */ |
| |
| /* variables holding tunable values */ |
| |
| static unsigned long trim_threshold = DEFAULT_TRIM_THRESHOLD; |
| static unsigned long top_pad = DEFAULT_TOP_PAD; |
| static unsigned int n_mmaps_max = DEFAULT_MMAP_MAX; |
| static unsigned long mmap_threshold = DEFAULT_MMAP_THRESHOLD; |
| |
| /* The first value returned from sbrk */ |
| static char* sbrk_base = (char*)(-1); |
| |
| /* The maximum memory obtained from system via sbrk */ |
| static unsigned long max_sbrked_mem = 0; |
| |
| /* The maximum via either sbrk or mmap */ |
| static unsigned long max_total_mem = 0; |
| |
| /* internal working copy of mallinfo */ |
| static struct mallinfo current_mallinfo = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| /* The total memory obtained from system via sbrk */ |
| #define sbrked_mem (current_mallinfo.arena) |
| |
| /* Tracking mmaps */ |
| |
| #ifdef DEBUG |
| static unsigned int n_mmaps = 0; |
| #endif /* DEBUG */ |
| static unsigned long mmapped_mem = 0; |
| #if HAVE_MMAP |
| static unsigned int max_n_mmaps = 0; |
| static unsigned long max_mmapped_mem = 0; |
| #endif |
| |
| |
| |
| /* |
| Debugging support |
| */ |
| |
| #ifdef DEBUG |
| |
| |
| /* |
| These routines make a number of assertions about the states |
| of data structures that should be true at all times. If any |
| are not true, it's very likely that a user program has somehow |
| trashed memory. (It's also possible that there is a coding error |
| in malloc. In which case, please report it!) |
| */ |
| |
| #if __STD_C |
| static void do_check_chunk(mchunkptr p) |
| #else |
| static void do_check_chunk(p) mchunkptr p; |
| #endif |
| { |
| INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE; |
| |
| /* No checkable chunk is mmapped */ |
| assert(!chunk_is_mmapped(p)); |
| |
| /* Check for legal address ... */ |
| assert((char*)p >= sbrk_base); |
| if (p != top) |
| assert((char*)p + sz <= (char*)top); |
| else |
| assert((char*)p + sz <= sbrk_base + sbrked_mem); |
| |
| } |
| |
| |
| #if __STD_C |
| static void do_check_free_chunk(mchunkptr p) |
| #else |
| static void do_check_free_chunk(p) mchunkptr p; |
| #endif |
| { |
| INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE; |
| mchunkptr next = chunk_at_offset(p, sz); |
| |
| do_check_chunk(p); |
| |
| /* Check whether it claims to be free ... */ |
| assert(!inuse(p)); |
| |
| /* Unless a special marker, must have OK fields */ |
| if ((long)sz >= (long)MINSIZE) |
| { |
| assert((sz & MALLOC_ALIGN_MASK) == 0); |
| assert(aligned_OK(chunk2mem(p))); |
| /* ... matching footer field */ |
| assert(next->prev_size == sz); |
| /* ... and is fully consolidated */ |
| assert(prev_inuse(p)); |
| assert (next == top || inuse(next)); |
| |
| /* ... and has minimally sane links */ |
| assert(p->fd->bk == p); |
| assert(p->bk->fd == p); |
| } |
| else /* markers are always of size SIZE_SZ */ |
| assert(sz == SIZE_SZ); |
| } |
| |
| #if __STD_C |
| static void do_check_inuse_chunk(mchunkptr p) |
| #else |
| static void do_check_inuse_chunk(p) mchunkptr p; |
| #endif |
| { |
| mchunkptr next = next_chunk(p); |
| do_check_chunk(p); |
| |
| /* Check whether it claims to be in use ... */ |
| assert(inuse(p)); |
| |
| /* ... and is surrounded by OK chunks. |
| Since more things can be checked with free chunks than inuse ones, |
| if an inuse chunk borders them and debug is on, it's worth doing them. |
| */ |
| if (!prev_inuse(p)) |
| { |
| mchunkptr prv = prev_chunk(p); |
| assert(next_chunk(prv) == p); |
| do_check_free_chunk(prv); |
| } |
| if (next == top) |
| { |
| assert(prev_inuse(next)); |
| assert(chunksize(next) >= MINSIZE); |
| } |
| else if (!inuse(next)) |
| do_check_free_chunk(next); |
| |
| } |
| |
| #if __STD_C |
| static void do_check_malloced_chunk(mchunkptr p, INTERNAL_SIZE_T s) |
| #else |
| static void do_check_malloced_chunk(p, s) mchunkptr p; INTERNAL_SIZE_T s; |
| #endif |
| { |
| INTERNAL_SIZE_T sz = p->size & ~PREV_INUSE; |
| long room = sz - s; |
| |
| do_check_inuse_chunk(p); |
| |
| /* Legal size ... */ |
| assert((long)sz >= (long)MINSIZE); |
| assert((sz & MALLOC_ALIGN_MASK) == 0); |
| assert(room >= 0); |
| assert(room < (long)MINSIZE); |
| |
| /* ... and alignment */ |
| assert(aligned_OK(chunk2mem(p))); |
| |
| |
| /* ... and was allocated at front of an available chunk */ |
| assert(prev_inuse(p)); |
| |
| } |
| |
| |
| #define check_free_chunk(P) do_check_free_chunk(P) |
| #define check_inuse_chunk(P) do_check_inuse_chunk(P) |
| #define check_chunk(P) do_check_chunk(P) |
| #define check_malloced_chunk(P,N) do_check_malloced_chunk(P,N) |
| #else |
| #define check_free_chunk(P) |
| #define check_inuse_chunk(P) |
| #define check_chunk(P) |
| #define check_malloced_chunk(P,N) |
| #endif |
| |
| |
| |
| /* |
| Macro-based internal utilities |
| */ |
| |
| |
| /* |
| Linking chunks in bin lists. |
| Call these only with variables, not arbitrary expressions, as arguments. |
| */ |
| |
| /* |
| Place chunk p of size s in its bin, in size order, |
| putting it ahead of others of same size. |
| */ |
| |
| |
| #define frontlink(P, S, IDX, BK, FD) \ |
| { \ |
| if (S < MAX_SMALLBIN_SIZE) \ |
| { \ |
| IDX = smallbin_index(S); \ |
| mark_binblock(IDX); \ |
| BK = bin_at(IDX); \ |
| FD = BK->fd; \ |
| P->bk = BK; \ |
| P->fd = FD; \ |
| FD->bk = BK->fd = P; \ |
| } \ |
| else \ |
| { \ |
| IDX = bin_index(S); \ |
| BK = bin_at(IDX); \ |
| FD = BK->fd; \ |
| if (FD == BK) mark_binblock(IDX); \ |
| else \ |
| { \ |
| while (FD != BK && S < chunksize(FD)) FD = FD->fd; \ |
| BK = FD->bk; \ |
| } \ |
| P->bk = BK; \ |
| P->fd = FD; \ |
| FD->bk = BK->fd = P; \ |
| } \ |
| } |
| |
| |
| /* take a chunk off a list */ |
| |
| #define unlink(P, BK, FD) \ |
| { \ |
| BK = P->bk; \ |
| FD = P->fd; \ |
| FD->bk = BK; \ |
| BK->fd = FD; \ |
| } \ |
| |
| /* Place p as the last remainder */ |
| |
| #define link_last_remainder(P) \ |
| { \ |
| last_remainder->fd = last_remainder->bk = P; \ |
| P->fd = P->bk = last_remainder; \ |
| } |
| |
| /* Clear the last_remainder bin */ |
| |
| #define clear_last_remainder \ |
| (last_remainder->fd = last_remainder->bk = last_remainder) |
| |
| |
| |
| |
| |
| /* Routines dealing with mmap(). */ |
| |
| #if HAVE_MMAP |
| |
| #if __STD_C |
| static mchunkptr mmap_chunk(size_t size) |
| #else |
| static mchunkptr mmap_chunk(size) size_t size; |
| #endif |
| { |
| size_t page_mask = malloc_getpagesize - 1; |
| mchunkptr p; |
| |
| #ifndef MAP_ANONYMOUS |
| static int fd = -1; |
| #endif |
| |
| if(n_mmaps >= n_mmaps_max) return 0; /* too many regions */ |
| |
| /* For mmapped chunks, the overhead is one SIZE_SZ unit larger, because |
| * there is no following chunk whose prev_size field could be used. |
| */ |
| size = (size + SIZE_SZ + page_mask) & ~page_mask; |
| |
| #ifdef MAP_ANONYMOUS |
| p = (mchunkptr)mmap(0, size, PROT_READ|PROT_WRITE, |
| MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); |
| #else /* !MAP_ANONYMOUS */ |
| if (fd < 0) |
| { |
| fd = open("/dev/zero", O_RDWR); |
| if(fd < 0) return 0; |
| } |
| p = (mchunkptr)mmap(0, size, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0); |
| #endif |
| |
| if(p == (mchunkptr)-1) return 0; |
| |
| n_mmaps++; |
| if (n_mmaps > max_n_mmaps) max_n_mmaps = n_mmaps; |
| |
| /* We demand that eight bytes into a page must be 8-byte aligned. */ |
| assert(aligned_OK(chunk2mem(p))); |
| |
| /* The offset to the start of the mmapped region is stored |
| * in the prev_size field of the chunk; normally it is zero, |
| * but that can be changed in memalign(). |
| */ |
| p->prev_size = 0; |
| set_head(p, size|IS_MMAPPED); |
| |
| mmapped_mem += size; |
| if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem) |
| max_mmapped_mem = mmapped_mem; |
| if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem) |
| max_total_mem = mmapped_mem + sbrked_mem; |
| return p; |
| } |
| |
| #if __STD_C |
| static void munmap_chunk(mchunkptr p) |
| #else |
| static void munmap_chunk(p) mchunkptr p; |
| #endif |
| { |
| INTERNAL_SIZE_T size = chunksize(p); |
| int ret; |
| |
| assert (chunk_is_mmapped(p)); |
| assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem)); |
| assert((n_mmaps > 0)); |
| assert(((p->prev_size + size) & (malloc_getpagesize-1)) == 0); |
| |
| n_mmaps--; |
| mmapped_mem -= (size + p->prev_size); |
| |
| ret = munmap((char *)p - p->prev_size, size + p->prev_size); |
| |
| /* munmap returns non-zero on failure */ |
| assert(ret == 0); |
| } |
| |
| #if HAVE_MREMAP |
| |
| #if __STD_C |
| static mchunkptr mremap_chunk(mchunkptr p, size_t new_size) |
| #else |
| static mchunkptr mremap_chunk(p, new_size) mchunkptr p; size_t new_size; |
| #endif |
| { |
| size_t page_mask = malloc_getpagesize - 1; |
| INTERNAL_SIZE_T offset = p->prev_size; |
| INTERNAL_SIZE_T size = chunksize(p); |
| char *cp; |
| |
| assert (chunk_is_mmapped(p)); |
| assert(! ((char*)p >= sbrk_base && (char*)p < sbrk_base + sbrked_mem)); |
| assert((n_mmaps > 0)); |
| assert(((size + offset) & (malloc_getpagesize-1)) == 0); |
| |
| /* Note the extra SIZE_SZ overhead as in mmap_chunk(). */ |
| new_size = (new_size + offset + SIZE_SZ + page_mask) & ~page_mask; |
| |
| cp = (char *)mremap((char *)p - offset, size + offset, new_size, 1); |
| |
| if (cp == (char *)-1) return 0; |
| |
| p = (mchunkptr)(cp + offset); |
| |
| assert(aligned_OK(chunk2mem(p))); |
| |
| assert((p->prev_size == offset)); |
| set_head(p, (new_size - offset)|IS_MMAPPED); |
| |
| mmapped_mem -= size + offset; |
| mmapped_mem += new_size; |
| if ((unsigned long)mmapped_mem > (unsigned long)max_mmapped_mem) |
| max_mmapped_mem = mmapped_mem; |
| if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem) |
| max_total_mem = mmapped_mem + sbrked_mem; |
| return p; |
| } |
| |
| #endif /* HAVE_MREMAP */ |
| |
| #endif /* HAVE_MMAP */ |
| |
| |
| |
| |
| /* |
| Extend the top-most chunk by obtaining memory from system. |
| Main interface to sbrk (but see also malloc_trim). |
| */ |
| |
| #if __STD_C |
| static void malloc_extend_top(INTERNAL_SIZE_T nb) |
| #else |
| static void malloc_extend_top(nb) INTERNAL_SIZE_T nb; |
| #endif |
| { |
| char* brk; /* return value from sbrk */ |
| INTERNAL_SIZE_T front_misalign; /* unusable bytes at front of sbrked space */ |
| INTERNAL_SIZE_T correction; /* bytes for 2nd sbrk call */ |
| char* new_brk; /* return of 2nd sbrk call */ |
| INTERNAL_SIZE_T top_size; /* new size of top chunk */ |
| |
| mchunkptr old_top = top; /* Record state of old top */ |
| INTERNAL_SIZE_T old_top_size = chunksize(old_top); |
| char* old_end = (char*)(chunk_at_offset(old_top, old_top_size)); |
| |
| /* Pad request with top_pad plus minimal overhead */ |
| |
| INTERNAL_SIZE_T sbrk_size = nb + top_pad + MINSIZE; |
| unsigned long pagesz = malloc_getpagesize; |
| |
| /* If not the first time through, round to preserve page boundary */ |
| /* Otherwise, we need to correct to a page size below anyway. */ |
| /* (We also correct below if an intervening foreign sbrk call.) */ |
| |
| if (sbrk_base != (char*)(-1)) |
| sbrk_size = (sbrk_size + (pagesz - 1)) & ~(pagesz - 1); |
| |
| brk = (char*)(MORECORE (sbrk_size)); |
| |
| /* Fail if sbrk failed or if a foreign sbrk call killed our space */ |
| if (brk == (char*)(MORECORE_FAILURE) || |
| (brk < old_end && old_top != initial_top)) |
| return; |
| |
| sbrked_mem += sbrk_size; |
| |
| if (brk == old_end) /* can just add bytes to current top */ |
| { |
| top_size = sbrk_size + old_top_size; |
| set_head(top, top_size | PREV_INUSE); |
| } |
| else |
| { |
| if (sbrk_base == (char*)(-1)) /* First time through. Record base */ |
| sbrk_base = brk; |
| else /* Someone else called sbrk(). Count those bytes as sbrked_mem. */ |
| sbrked_mem += brk - (char*)old_end; |
| |
| /* Guarantee alignment of first new chunk made from this space */ |
| front_misalign = (unsigned long)chunk2mem(brk) & MALLOC_ALIGN_MASK; |
| if (front_misalign > 0) |
| { |
| correction = (MALLOC_ALIGNMENT) - front_misalign; |
| brk += correction; |
| } |
| else |
| correction = 0; |
| |
| /* Guarantee the next brk will be at a page boundary */ |
| |
| correction += ((((unsigned long)(brk + sbrk_size))+(pagesz-1)) & |
| ~(pagesz - 1)) - ((unsigned long)(brk + sbrk_size)); |
| |
| /* Allocate correction */ |
| new_brk = (char*)(MORECORE (correction)); |
| if (new_brk == (char*)(MORECORE_FAILURE)) return; |
| |
| sbrked_mem += correction; |
| |
| top = (mchunkptr)brk; |
| top_size = new_brk - brk + correction; |
| set_head(top, top_size | PREV_INUSE); |
| |
| if (old_top != initial_top) |
| { |
| |
| /* There must have been an intervening foreign sbrk call. */ |
| /* A double fencepost is necessary to prevent consolidation */ |
| |
| /* If not enough space to do this, then user did something very wrong */ |
| if (old_top_size < MINSIZE) |
| { |
| set_head(top, PREV_INUSE); /* will force null return from malloc */ |
| return; |
| } |
| |
| /* Also keep size a multiple of MALLOC_ALIGNMENT */ |
| old_top_size = (old_top_size - 3*SIZE_SZ) & ~MALLOC_ALIGN_MASK; |
| set_head_size(old_top, old_top_size); |
| chunk_at_offset(old_top, old_top_size )->size = |
| SIZE_SZ|PREV_INUSE; |
| chunk_at_offset(old_top, old_top_size + SIZE_SZ)->size = |
| SIZE_SZ|PREV_INUSE; |
| /* If possible, release the rest. */ |
| if (old_top_size >= MINSIZE) |
| fREe(chunk2mem(old_top)); |
| } |
| } |
| |
| if ((unsigned long)sbrked_mem > (unsigned long)max_sbrked_mem) |
| max_sbrked_mem = sbrked_mem; |
| if ((unsigned long)(mmapped_mem + sbrked_mem) > (unsigned long)max_total_mem) |
| max_total_mem = mmapped_mem + sbrked_mem; |
| |
| /* We always land on a page boundary */ |
| assert(((unsigned long)((char*)top + top_size) & (pagesz - 1)) == 0); |
| } |
| |
| |
| |
| |
| /* Main public routines */ |
| |
| |
| /* |
| Malloc Algorthim: |
| |
| The requested size is first converted into a usable form, `nb'. |
| This currently means to add 4 bytes overhead plus possibly more to |
| obtain 8-byte alignment and/or to obtain a size of at least |
| MINSIZE (currently 16 bytes), the smallest allocatable size. |
| (All fits are considered `exact' if they are within MINSIZE bytes.) |
| |
| From there, the first successful of the following steps is taken: |
| |
| 1. The bin corresponding to the request size is scanned, and if |
| a chunk of exactly the right size is found, it is taken. |
| |
| 2. The most recently remaindered chunk is used if it is big |
| enough. This is a form of (roving) first fit, used only in |
| the absence of exact fits. Runs of consecutive requests use |
| the remainder of the chunk used for the previous such request |
| whenever possible. This limited use of a first-fit style |
| allocation strategy tends to give contiguous chunks |
| coextensive lifetimes, which improves locality and can reduce |
| fragmentation in the long run. |
| |
| 3. Other bins are scanned in increasing size order, using a |
| chunk big enough to fulfill the request, and splitting off |
| any remainder. This search is strictly by best-fit; i.e., |
| the smallest (with ties going to approximately the least |
| recently used) chunk that fits is selected. |
| |
| 4. If large enough, the chunk bordering the end of memory |
| (`top') is split off. (This use of `top' is in accord with |
| the best-fit search rule. In effect, `top' is treated as |
| larger (and thus less well fitting) than any other available |
| chunk since it can be extended to be as large as necessary |
| (up to system limitations). |
| |
| 5. If the request size meets the mmap threshold and the |
| system supports mmap, and there are few enough currently |
| allocated mmapped regions, and a call to mmap succeeds, |
| the request is allocated via direct memory mapping. |
| |
| 6. Otherwise, the top of memory is extended by |
| obtaining more space from the system (normally using sbrk, |
| but definable to anything else via the MORECORE macro). |
| Memory is gathered from the system (in system page-sized |
| units) in a way that allows chunks obtained across different |
| sbrk calls to be consolidated, but does not require |
| contiguous memory. Thus, it should be safe to intersperse |
| mallocs with other sbrk calls. |
| |
| |
| All allocations are made from the the `lowest' part of any found |
| chunk. (The implementation invariant is that prev_inuse is |
| always true of any allocated chunk; i.e., that each allocated |
| chunk borders either a previously allocated and still in-use chunk, |
| or the base of its memory arena.) |
| |
| */ |
| |
| #if __STD_C |
| Void_t* mALLOc(size_t bytes) |
| #else |
| Void_t* mALLOc(bytes) size_t bytes; |
| #endif |
| { |
| mchunkptr victim; /* inspected/selected chunk */ |
| INTERNAL_SIZE_T victim_size; /* its size */ |
| int idx; /* index for bin traversal */ |
| mbinptr bin; /* associated bin */ |
| mchunkptr remainder; /* remainder from a split */ |
| long remainder_size; /* its size */ |
| int remainder_index; /* its bin index */ |
| unsigned long block; /* block traverser bit */ |
| int startidx; /* first bin of a traversed block */ |
| mchunkptr fwd; /* misc temp for linking */ |
| mchunkptr bck; /* misc temp for linking */ |
| mbinptr q; /* misc temp */ |
| |
| INTERNAL_SIZE_T nb; |
| |
| #ifdef CONFIG_SYS_MALLOC_F_LEN |
| if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) |
| return malloc_simple(bytes); |
| #endif |
| |
| /* check if mem_malloc_init() was run */ |
| if ((mem_malloc_start == 0) && (mem_malloc_end == 0)) { |
| /* not initialized yet */ |
| return NULL; |
| } |
| |
| if ((long)bytes < 0) return NULL; |
| |
| nb = request2size(bytes); /* padded request size; */ |
| |
| /* Check for exact match in a bin */ |
| |
| if (is_small_request(nb)) /* Faster version for small requests */ |
| { |
| idx = smallbin_index(nb); |
| |
| /* No traversal or size check necessary for small bins. */ |
| |
| q = bin_at(idx); |
| victim = last(q); |
| |
| /* Also scan the next one, since it would have a remainder < MINSIZE */ |
| if (victim == q) |
| { |
| q = next_bin(q); |
| victim = last(q); |
| } |
| if (victim != q) |
| { |
| victim_size = chunksize(victim); |
| unlink(victim, bck, fwd); |
| set_inuse_bit_at_offset(victim, victim_size); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| } |
| |
| idx += 2; /* Set for bin scan below. We've already scanned 2 bins. */ |
| |
| } |
| else |
| { |
| idx = bin_index(nb); |
| bin = bin_at(idx); |
| |
| for (victim = last(bin); victim != bin; victim = victim->bk) |
| { |
| victim_size = chunksize(victim); |
| remainder_size = victim_size - nb; |
| |
| if (remainder_size >= (long)MINSIZE) /* too big */ |
| { |
| --idx; /* adjust to rescan below after checking last remainder */ |
| break; |
| } |
| |
| else if (remainder_size >= 0) /* exact fit */ |
| { |
| unlink(victim, bck, fwd); |
| set_inuse_bit_at_offset(victim, victim_size); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| } |
| } |
| |
| ++idx; |
| |
| } |
| |
| /* Try to use the last split-off remainder */ |
| |
| if ( (victim = last_remainder->fd) != last_remainder) |
| { |
| victim_size = chunksize(victim); |
| remainder_size = victim_size - nb; |
| |
| if (remainder_size >= (long)MINSIZE) /* re-split */ |
| { |
| remainder = chunk_at_offset(victim, nb); |
| set_head(victim, nb | PREV_INUSE); |
| link_last_remainder(remainder); |
| set_head(remainder, remainder_size | PREV_INUSE); |
| set_foot(remainder, remainder_size); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| } |
| |
| clear_last_remainder; |
| |
| if (remainder_size >= 0) /* exhaust */ |
| { |
| set_inuse_bit_at_offset(victim, victim_size); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| } |
| |
| /* Else place in bin */ |
| |
| frontlink(victim, victim_size, remainder_index, bck, fwd); |
| } |
| |
| /* |
| If there are any possibly nonempty big-enough blocks, |
| search for best fitting chunk by scanning bins in blockwidth units. |
| */ |
| |
| if ( (block = idx2binblock(idx)) <= binblocks_r) |
| { |
| |
| /* Get to the first marked block */ |
| |
| if ( (block & binblocks_r) == 0) |
| { |
| /* force to an even block boundary */ |
| idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH; |
| block <<= 1; |
| while ((block & binblocks_r) == 0) |
| { |
| idx += BINBLOCKWIDTH; |
| block <<= 1; |
| } |
| } |
| |
| /* For each possibly nonempty block ... */ |
| for (;;) |
| { |
| startidx = idx; /* (track incomplete blocks) */ |
| q = bin = bin_at(idx); |
| |
| /* For each bin in this block ... */ |
| do |
| { |
| /* Find and use first big enough chunk ... */ |
| |
| for (victim = last(bin); victim != bin; victim = victim->bk) |
| { |
| victim_size = chunksize(victim); |
| remainder_size = victim_size - nb; |
| |
| if (remainder_size >= (long)MINSIZE) /* split */ |
| { |
| remainder = chunk_at_offset(victim, nb); |
| set_head(victim, nb | PREV_INUSE); |
| unlink(victim, bck, fwd); |
| link_last_remainder(remainder); |
| set_head(remainder, remainder_size | PREV_INUSE); |
| set_foot(remainder, remainder_size); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| } |
| |
| else if (remainder_size >= 0) /* take */ |
| { |
| set_inuse_bit_at_offset(victim, victim_size); |
| unlink(victim, bck, fwd); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| } |
| |
| } |
| |
| bin = next_bin(bin); |
| |
| } while ((++idx & (BINBLOCKWIDTH - 1)) != 0); |
| |
| /* Clear out the block bit. */ |
| |
| do /* Possibly backtrack to try to clear a partial block */ |
| { |
| if ((startidx & (BINBLOCKWIDTH - 1)) == 0) |
| { |
| av_[1] = (mbinptr)(binblocks_r & ~block); |
| break; |
| } |
| --startidx; |
| q = prev_bin(q); |
| } while (first(q) == q); |
| |
| /* Get to the next possibly nonempty block */ |
| |
| if ( (block <<= 1) <= binblocks_r && (block != 0) ) |
| { |
| while ((block & binblocks_r) == 0) |
| { |
| idx += BINBLOCKWIDTH; |
| block <<= 1; |
| } |
| } |
| else |
| break; |
| } |
| } |
| |
| |
| /* Try to use top chunk */ |
| |
| /* Require that there be a remainder, ensuring top always exists */ |
| if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE) |
| { |
| |
| #if HAVE_MMAP |
| /* If big and would otherwise need to extend, try to use mmap instead */ |
| if ((unsigned long)nb >= (unsigned long)mmap_threshold && |
| (victim = mmap_chunk(nb)) != 0) |
| return chunk2mem(victim); |
| #endif |
| |
| /* Try to extend */ |
| malloc_extend_top(nb); |
| if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE) |
| return NULL; /* propagate failure */ |
| } |
| |
| victim = top; |
| set_head(victim, nb | PREV_INUSE); |
| top = chunk_at_offset(victim, nb); |
| set_head(top, remainder_size | PREV_INUSE); |
| check_malloced_chunk(victim, nb); |
| return chunk2mem(victim); |
| |
| } |
| |
| |
| |
| |
| /* |
| |
| free() algorithm : |
| |
| cases: |
| |
| 1. free(0) has no effect. |
| |
| 2. If the chunk was allocated via mmap, it is release via munmap(). |
| |
| 3. If a returned chunk borders the current high end of memory, |
| it is consolidated into the top, and if the total unused |
| topmost memory exceeds the trim threshold, malloc_trim is |
| called. |
| |
| 4. Other chunks are consolidated as they arrive, and |
| placed in corresponding bins. (This includes the case of |
| consolidating with the current `last_remainder'). |
| |
| */ |
| |
| |
| #if __STD_C |
| void fREe(Void_t* mem) |
| #else |
| void fREe(mem) Void_t* mem; |
| #endif |
| { |
| mchunkptr p; /* chunk corresponding to mem */ |
| INTERNAL_SIZE_T hd; /* its head field */ |
| INTERNAL_SIZE_T sz; /* its size */ |
| int idx; /* its bin index */ |
| mchunkptr next; /* next contiguous chunk */ |
| INTERNAL_SIZE_T nextsz; /* its size */ |
| INTERNAL_SIZE_T prevsz; /* size of previous contiguous chunk */ |
| mchunkptr bck; /* misc temp for linking */ |
| mchunkptr fwd; /* misc temp for linking */ |
| int islr; /* track whether merging with last_remainder */ |
| |
| #ifdef CONFIG_SYS_MALLOC_F_LEN |
| /* free() is a no-op - all the memory will be freed on relocation */ |
| if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) |
| return; |
| #endif |
| |
| if (mem == NULL) /* free(0) has no effect */ |
| return; |
| |
| p = mem2chunk(mem); |
| hd = p->size; |
| |
| #if HAVE_MMAP |
| if (hd & IS_MMAPPED) /* release mmapped memory. */ |
| { |
| munmap_chunk(p); |
| return; |
| } |
| #endif |
| |
| check_inuse_chunk(p); |
| |
| sz = hd & ~PREV_INUSE; |
| next = chunk_at_offset(p, sz); |
| nextsz = chunksize(next); |
| |
| if (next == top) /* merge with top */ |
| { |
| sz += nextsz; |
| |
| if (!(hd & PREV_INUSE)) /* consolidate backward */ |
| { |
| prevsz = p->prev_size; |
| p = chunk_at_offset(p, -((long) prevsz)); |
| sz += prevsz; |
| unlink(p, bck, fwd); |
| } |
| |
| set_head(p, sz | PREV_INUSE); |
| top = p; |
| if ((unsigned long)(sz) >= (unsigned long)trim_threshold) |
| malloc_trim(top_pad); |
| return; |
| } |
| |
| set_head(next, nextsz); /* clear inuse bit */ |
| |
| islr = 0; |
| |
| if (!(hd & PREV_INUSE)) /* consolidate backward */ |
| { |
| prevsz = p->prev_size; |
| p = chunk_at_offset(p, -((long) prevsz)); |
| sz += prevsz; |
| |
| if (p->fd == last_remainder) /* keep as last_remainder */ |
| islr = 1; |
| else |
| unlink(p, bck, fwd); |
| } |
| |
| if (!(inuse_bit_at_offset(next, nextsz))) /* consolidate forward */ |
| { |
| sz += nextsz; |
| |
| if (!islr && next->fd == last_remainder) /* re-insert last_remainder */ |
| { |
| islr = 1; |
| link_last_remainder(p); |
| } |
| else |
| unlink(next, bck, fwd); |
| } |
| |
| |
| set_head(p, sz | PREV_INUSE); |
| set_foot(p, sz); |
| if (!islr) |
| frontlink(p, sz, idx, bck, fwd); |
| } |
| |
| |
| |
| |
| |
| /* |
| |
| Realloc algorithm: |
| |
| Chunks that were obtained via mmap cannot be extended or shrunk |
| unless HAVE_MREMAP is defined, in which case mremap is used. |
| Otherwise, if their reallocation is for additional space, they are |
| copied. If for less, they are just left alone. |
| |
| Otherwise, if the reallocation is for additional space, and the |
| chunk can be extended, it is, else a malloc-copy-free sequence is |
| taken. There are several different ways that a chunk could be |
| extended. All are tried: |
| |
| * Extending forward into following adjacent free chunk. |
| * Shifting backwards, joining preceding adjacent space |
| * Both shifting backwards and extending forward. |
| * Extending into newly sbrked space |
| |
| Unless the #define REALLOC_ZERO_BYTES_FREES is set, realloc with a |
| size argument of zero (re)allocates a minimum-sized chunk. |
| |
| If the reallocation is for less space, and the new request is for |
| a `small' (<512 bytes) size, then the newly unused space is lopped |
| off and freed. |
| |
| The old unix realloc convention of allowing the last-free'd chunk |
| to be used as an argument to realloc is no longer supported. |
| I don't know of any programs still relying on this feature, |
| and allowing it would also allow too many other incorrect |
| usages of realloc to be sensible. |
| |
| |
| */ |
| |
| |
| #if __STD_C |
| Void_t* rEALLOc(Void_t* oldmem, size_t bytes) |
| #else |
| Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; |
| #endif |
| { |
| INTERNAL_SIZE_T nb; /* padded request size */ |
| |
| mchunkptr oldp; /* chunk corresponding to oldmem */ |
| INTERNAL_SIZE_T oldsize; /* its size */ |
| |
| mchunkptr newp; /* chunk to return */ |
| INTERNAL_SIZE_T newsize; /* its size */ |
| Void_t* newmem; /* corresponding user mem */ |
| |
| mchunkptr next; /* next contiguous chunk after oldp */ |
| INTERNAL_SIZE_T nextsize; /* its size */ |
| |
| mchunkptr prev; /* previous contiguous chunk before oldp */ |
| INTERNAL_SIZE_T prevsize; /* its size */ |
| |
| mchunkptr remainder; /* holds split off extra space from newp */ |
| INTERNAL_SIZE_T remainder_size; /* its size */ |
| |
| mchunkptr bck; /* misc temp for linking */ |
| mchunkptr fwd; /* misc temp for linking */ |
| |
| #ifdef REALLOC_ZERO_BYTES_FREES |
| if (bytes == 0) { fREe(oldmem); return 0; } |
| #endif |
| |
| if ((long)bytes < 0) return NULL; |
| |
| /* realloc of null is supposed to be same as malloc */ |
| if (oldmem == NULL) return mALLOc(bytes); |
| |
| #ifdef CONFIG_SYS_MALLOC_F_LEN |
| if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { |
| /* This is harder to support and should not be needed */ |
| panic("pre-reloc realloc() is not supported"); |
| } |
| #endif |
| |
| newp = oldp = mem2chunk(oldmem); |
| newsize = oldsize = chunksize(oldp); |
| |
| |
| nb = request2size(bytes); |
| |
| #if HAVE_MMAP |
| if (chunk_is_mmapped(oldp)) |
| { |
| #if HAVE_MREMAP |
| newp = mremap_chunk(oldp, nb); |
| if(newp) return chunk2mem(newp); |
| #endif |
| /* Note the extra SIZE_SZ overhead. */ |
| if(oldsize - SIZE_SZ >= nb) return oldmem; /* do nothing */ |
| /* Must alloc, copy, free. */ |
| newmem = mALLOc(bytes); |
| if (newmem == 0) return 0; /* propagate failure */ |
| MALLOC_COPY(newmem, oldmem, oldsize - 2*SIZE_SZ); |
| munmap_chunk(oldp); |
| return newmem; |
| } |
| #endif |
| |
| check_inuse_chunk(oldp); |
| |
| if ((long)(oldsize) < (long)(nb)) |
| { |
| |
| /* Try expanding forward */ |
| |
| next = chunk_at_offset(oldp, oldsize); |
| if (next == top || !inuse(next)) |
| { |
| nextsize = chunksize(next); |
| |
| /* Forward into top only if a remainder */ |
| if (next == top) |
| { |
| if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE)) |
| { |
| newsize += nextsize; |
| top = chunk_at_offset(oldp, nb); |
| set_head(top, (newsize - nb) | PREV_INUSE); |
| set_head_size(oldp, nb); |
| return chunk2mem(oldp); |
| } |
| } |
| |
| /* Forward into next chunk */ |
| else if (((long)(nextsize + newsize) >= (long)(nb))) |
| { |
| unlink(next, bck, fwd); |
| newsize += nextsize; |
| goto split; |
| } |
| } |
| else |
| { |
| next = NULL; |
| nextsize = 0; |
| } |
| |
| /* Try shifting backwards. */ |
| |
| if (!prev_inuse(oldp)) |
| { |
| prev = prev_chunk(oldp); |
| prevsize = chunksize(prev); |
| |
| /* try forward + backward first to save a later consolidation */ |
| |
| if (next != NULL) |
| { |
| /* into top */ |
| if (next == top) |
| { |
| if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE)) |
| { |
| unlink(prev, bck, fwd); |
| newp = prev; |
| newsize += prevsize + nextsize; |
| newmem = chunk2mem(newp); |
| MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); |
| top = chunk_at_offset(newp, nb); |
| set_head(top, (newsize - nb) | PREV_INUSE); |
| set_head_size(newp, nb); |
| return newmem; |
| } |
| } |
| |
| /* into next chunk */ |
| else if (((long)(nextsize + prevsize + newsize) >= (long)(nb))) |
| { |
| unlink(next, bck, fwd); |
| unlink(prev, bck, fwd); |
| newp = prev; |
| newsize += nextsize + prevsize; |
| newmem = chunk2mem(newp); |
| MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); |
| goto split; |
| } |
| } |
| |
| /* backward only */ |
| if (prev != NULL && (long)(prevsize + newsize) >= (long)nb) |
| { |
| unlink(prev, bck, fwd); |
| newp = prev; |
| newsize += prevsize; |
| newmem = chunk2mem(newp); |
| MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); |
| goto split; |
| } |
| } |
| |
| /* Must allocate */ |
| |
| newmem = mALLOc (bytes); |
| |
| if (newmem == NULL) /* propagate failure */ |
| return NULL; |
| |
| /* Avoid copy if newp is next chunk after oldp. */ |
| /* (This can only happen when new chunk is sbrk'ed.) */ |
| |
| if ( (newp = mem2chunk(newmem)) == next_chunk(oldp)) |
| { |
| newsize += chunksize(newp); |
| newp = oldp; |
| goto split; |
| } |
| |
| /* Otherwise copy, free, and exit */ |
| MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); |
| fREe(oldmem); |
| return newmem; |
| } |
| |
| |
| split: /* split off extra room in old or expanded chunk */ |
| |
| if (newsize - nb >= MINSIZE) /* split off remainder */ |
| { |
| remainder = chunk_at_offset(newp, nb); |
| remainder_size = newsize - nb; |
| set_head_size(newp, nb); |
| set_head(remainder, remainder_size | PREV_INUSE); |
| set_inuse_bit_at_offset(remainder, remainder_size); |
| fREe(chunk2mem(remainder)); /* let free() deal with it */ |
| } |
| else |
| { |
| set_head_size(newp, newsize); |
| set_inuse_bit_at_offset(newp, newsize); |
| } |
| |
| check_inuse_chunk(newp); |
| return chunk2mem(newp); |
| } |
| |
| |
| |
| |
| /* |
| |
| memalign algorithm: |
| |
| memalign requests more than enough space from malloc, finds a spot |
| within that chunk that meets the alignment request, and then |
| possibly frees the leading and trailing space. |
| |
| The alignment argument must be a power of two. This property is not |
| checked by memalign, so misuse may result in random runtime errors. |
| |
| 8-byte alignment is guaranteed by normal malloc calls, so don't |
| bother calling memalign with an argument of 8 or less. |
| |
| Overreliance on memalign is a sure way to fragment space. |
| |
| */ |
| |
| |
| #if __STD_C |
| Void_t* mEMALIGn(size_t alignment, size_t bytes) |
| #else |
| Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; |
| #endif |
| { |
| INTERNAL_SIZE_T nb; /* padded request size */ |
| char* m; /* memory returned by malloc call */ |
| mchunkptr p; /* corresponding chunk */ |
| char* brk; /* alignment point within p */ |
| mchunkptr newp; /* chunk to return */ |
| INTERNAL_SIZE_T newsize; /* its size */ |
| INTERNAL_SIZE_T leadsize; /* leading space befor alignment point */ |
| mchunkptr remainder; /* spare room at end to split off */ |
| long remainder_size; /* its size */ |
| |
| if ((long)bytes < 0) return NULL; |
| |
| /* If need less alignment than we give anyway, just relay to malloc */ |
| |
| if (alignment <= MALLOC_ALIGNMENT) return mALLOc(bytes); |
| |
| /* Otherwise, ensure that it is at least a minimum chunk size */ |
| |
| if (alignment < MINSIZE) alignment = MINSIZE; |
| |
| /* Call malloc with worst case padding to hit alignment. */ |
| |
| nb = request2size(bytes); |
| m = (char*)(mALLOc(nb + alignment + MINSIZE)); |
| |
| /* |
| * The attempt to over-allocate (with a size large enough to guarantee the |
| * ability to find an aligned region within allocated memory) failed. |
| * |
| * Try again, this time only allocating exactly the size the user wants. If |
| * the allocation now succeeds and just happens to be aligned, we can still |
| * fulfill the user's request. |
| */ |
| if (m == NULL) { |
| size_t extra, extra2; |
| /* |
| * Use bytes not nb, since mALLOc internally calls request2size too, and |
| * each call increases the size to allocate, to account for the header. |
| */ |
| m = (char*)(mALLOc(bytes)); |
| /* Aligned -> return it */ |
| if ((((unsigned long)(m)) % alignment) == 0) |
| return m; |
| /* |
| * Otherwise, try again, requesting enough extra space to be able to |
| * acquire alignment. |
| */ |
| fREe(m); |
| /* Add in extra bytes to match misalignment of unexpanded allocation */ |
| extra = alignment - (((unsigned long)(m)) % alignment); |
| m = (char*)(mALLOc(bytes + extra)); |
| /* |
| * m might not be the same as before. Validate that the previous value of |
| * extra still works for the current value of m. |
| * If (!m), extra2=alignment so |
| */ |
| if (m) { |
| extra2 = alignment - (((unsigned long)(m)) % alignment); |
| if (extra2 > extra) { |
| fREe(m); |
| m = NULL; |
| } |
| } |
| /* Fall through to original NULL check and chunk splitting logic */ |
| } |
| |
| if (m == NULL) return NULL; /* propagate failure */ |
| |
| p = mem2chunk(m); |
| |
| if ((((unsigned long)(m)) % alignment) == 0) /* aligned */ |
| { |
| #if HAVE_MMAP |
| if(chunk_is_mmapped(p)) |
| return chunk2mem(p); /* nothing more to do */ |
| #endif |
| } |
| else /* misaligned */ |
| { |
| /* |
| Find an aligned spot inside chunk. |
| Since we need to give back leading space in a chunk of at |
| least MINSIZE, if the first calculation places us at |
| a spot with less than MINSIZE leader, we can move to the |
| next aligned spot -- we've allocated enough total room so that |
| this is always possible. |
| */ |
| |
| brk = (char*)mem2chunk(((unsigned long)(m + alignment - 1)) & -((signed) alignment)); |
| if ((long)(brk - (char*)(p)) < MINSIZE) brk = brk + alignment; |
| |
| newp = (mchunkptr)brk; |
| leadsize = brk - (char*)(p); |
| newsize = chunksize(p) - leadsize; |
| |
| #if HAVE_MMAP |
| if(chunk_is_mmapped(p)) |
| { |
| newp->prev_size = p->prev_size + leadsize; |
| set_head(newp, newsize|IS_MMAPPED); |
| return chunk2mem(newp); |
| } |
| #endif |
| |
| /* give back leader, use the rest */ |
| |
| set_head(newp, newsize | PREV_INUSE); |
| set_inuse_bit_at_offset(newp, newsize); |
| set_head_size(p, leadsize); |
| fREe(chunk2mem(p)); |
| p = newp; |
| |
| assert (newsize >= nb && (((unsigned long)(chunk2mem(p))) % alignment) == 0); |
| } |
| |
| /* Also give back spare room at the end */ |
| |
| remainder_size = chunksize(p) - nb; |
| |
| if (remainder_size >= (long)MINSIZE) |
| { |
| remainder = chunk_at_offset(p, nb); |
| set_head(remainder, remainder_size | PREV_INUSE); |
| set_head_size(p, nb); |
| fREe(chunk2mem(remainder)); |
| } |
| |
| check_inuse_chunk(p); |
| return chunk2mem(p); |
| |
| } |
| |
| |
| |
| |
| /* |
| valloc just invokes memalign with alignment argument equal |
| to the page size of the system (or as near to this as can |
| be figured out from all the includes/defines above.) |
| */ |
| |
| #if __STD_C |
| Void_t* vALLOc(size_t bytes) |
| #else |
| Void_t* vALLOc(bytes) size_t bytes; |
| #endif |
| { |
| return mEMALIGn (malloc_getpagesize, bytes); |
| } |
| |
| /* |
| pvalloc just invokes valloc for the nearest pagesize |
| that will accommodate request |
| */ |
| |
| |
| #if __STD_C |
| Void_t* pvALLOc(size_t bytes) |
| #else |
| Void_t* pvALLOc(bytes) size_t bytes; |
| #endif |
| { |
| size_t pagesize = malloc_getpagesize; |
| return mEMALIGn (pagesize, (bytes + pagesize - 1) & ~(pagesize - 1)); |
| } |
| |
| /* |
| |
| calloc calls malloc, then zeroes out the allocated chunk. |
| |
| */ |
| |
| #if __STD_C |
| Void_t* cALLOc(size_t n, size_t elem_size) |
| #else |
| Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; |
| #endif |
| { |
| mchunkptr p; |
| INTERNAL_SIZE_T csz; |
| |
| INTERNAL_SIZE_T sz = n * elem_size; |
| |
| |
| /* check if expand_top called, in which case don't need to clear */ |
| #ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT |
| #if MORECORE_CLEARS |
| mchunkptr oldtop = top; |
| INTERNAL_SIZE_T oldtopsize = chunksize(top); |
| #endif |
| #endif |
| Void_t* mem = mALLOc (sz); |
| |
| if ((long)n < 0) return NULL; |
| |
| if (mem == NULL) |
| return NULL; |
| else |
| { |
| #ifdef CONFIG_SYS_MALLOC_F_LEN |
| if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { |
| MALLOC_ZERO(mem, sz); |
| return mem; |
| } |
| #endif |
| p = mem2chunk(mem); |
| |
| /* Two optional cases in which clearing not necessary */ |
| |
| |
| #if HAVE_MMAP |
| if (chunk_is_mmapped(p)) return mem; |
| #endif |
| |
| csz = chunksize(p); |
| |
| #ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT |
| #if MORECORE_CLEARS |
| if (p == oldtop && csz > oldtopsize) |
| { |
| /* clear only the bytes from non-freshly-sbrked memory */ |
| csz = oldtopsize; |
| } |
| #endif |
| #endif |
| |
| MALLOC_ZERO(mem, csz - SIZE_SZ); |
| return mem; |
| } |
| } |
| |
| /* |
| |
| cfree just calls free. It is needed/defined on some systems |
| that pair it with calloc, presumably for odd historical reasons. |
| |
| */ |
| |
| #if !defined(INTERNAL_LINUX_C_LIB) || !defined(__ELF__) |
| #if __STD_C |
| void cfree(Void_t *mem) |
| #else |
| void cfree(mem) Void_t *mem; |
| #endif |
| { |
| fREe(mem); |
| } |
| #endif |
| |
| |
| |
| /* |
| |
| Malloc_trim gives memory back to the system (via negative |
| arguments to sbrk) if there is unused memory at the `high' end of |
| the malloc pool. You can call this after freeing large blocks of |
| memory to potentially reduce the system-level memory requirements |
| of a program. However, it cannot guarantee to reduce memory. Under |
| some allocation patterns, some large free blocks of memory will be |
| locked between two used chunks, so they cannot be given back to |
| the system. |
| |
| The `pad' argument to malloc_trim represents the amount of free |
| trailing space to leave untrimmed. If this argument is zero, |
| only the minimum amount of memory to maintain internal data |
| structures will be left (one page or less). Non-zero arguments |
| can be supplied to maintain enough trailing space to service |
| future expected allocations without having to re-obtain memory |
| from the system. |
| |
| Malloc_trim returns 1 if it actually released any memory, else 0. |
| |
| */ |
| |
| #if __STD_C |
| int malloc_trim(size_t pad) |
| #else |
| int malloc_trim(pad) size_t pad; |
| #endif |
| { |
| long top_size; /* Amount of top-most memory */ |
| long extra; /* Amount to release */ |
| char* current_brk; /* address returned by pre-check sbrk call */ |
| char* new_brk; /* address returned by negative sbrk call */ |
| |
| unsigned long pagesz = malloc_getpagesize; |
| |
| top_size = chunksize(top); |
| extra = ((top_size - pad - MINSIZE + (pagesz-1)) / pagesz - 1) * pagesz; |
| |
| if (extra < (long)pagesz) /* Not enough memory to release */ |
| return 0; |
| |
| else |
| { |
| /* Test to make sure no one else called sbrk */ |
| current_brk = (char*)(MORECORE (0)); |
| if (current_brk != (char*)(top) + top_size) |
| return 0; /* Apparently we don't own memory; must fail */ |
| |
| else |
| { |
| new_brk = (char*)(MORECORE (-extra)); |
| |
| if (new_brk == (char*)(MORECORE_FAILURE)) /* sbrk failed? */ |
| { |
| /* Try to figure out what we have */ |
| current_brk = (char*)(MORECORE (0)); |
| top_size = current_brk - (char*)top; |
| if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */ |
| { |
| sbrked_mem = current_brk - sbrk_base; |
| set_head(top, top_size | PREV_INUSE); |
| } |
| check_chunk(top); |
| return 0; |
| } |
| |
| else |
| { |
| /* Success. Adjust top accordingly. */ |
| set_head(top, (top_size - extra) | PREV_INUSE); |
| sbrked_mem -= extra; |
| check_chunk(top); |
| return 1; |
| } |
| } |
| } |
| } |
| |
| |
| |
| /* |
| malloc_usable_size: |
| |
| This routine tells you how many bytes you can actually use in an |
| allocated chunk, which may be more than you requested (although |
| often not). You can use this many bytes without worrying about |
| overwriting other allocated objects. Not a particularly great |
| programming practice, but still sometimes useful. |
| |
| */ |
| |
| #if __STD_C |
| size_t malloc_usable_size(Void_t* mem) |
| #else |
| size_t malloc_usable_size(mem) Void_t* mem; |
| #endif |
| { |
| mchunkptr p; |
| if (mem == NULL) |
| return 0; |
| else |
| { |
| p = mem2chunk(mem); |
| if(!chunk_is_mmapped(p)) |
| { |
| if (!inuse(p)) return 0; |
| check_inuse_chunk(p); |
| return chunksize(p) - SIZE_SZ; |
| } |
| return chunksize(p) - 2*SIZE_SZ; |
| } |
| } |
| |
| |
| |
| |
| /* Utility to update current_mallinfo for malloc_stats and mallinfo() */ |
| |
| #ifdef DEBUG |
| static void malloc_update_mallinfo() |
| { |
| int i; |
| mbinptr b; |
| mchunkptr p; |
| #ifdef DEBUG |
| mchunkptr q; |
| #endif |
| |
| INTERNAL_SIZE_T avail = chunksize(top); |
| int navail = ((long)(avail) >= (long)MINSIZE)? 1 : 0; |
| |
| for (i = 1; i < NAV; ++i) |
| { |
| b = bin_at(i); |
| for (p = last(b); p != b; p = p->bk) |
| { |
| #ifdef DEBUG |
| check_free_chunk(p); |
| for (q = next_chunk(p); |
| q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE; |
| q = next_chunk(q)) |
| check_inuse_chunk(q); |
| #endif |
| avail += chunksize(p); |
| navail++; |
| } |
| } |
| |
| current_mallinfo.ordblks = navail; |
| current_mallinfo.uordblks = sbrked_mem - avail; |
| current_mallinfo.fordblks = avail; |
| current_mallinfo.hblks = n_mmaps; |
| current_mallinfo.hblkhd = mmapped_mem; |
| current_mallinfo.keepcost = chunksize(top); |
| |
| } |
| #endif /* DEBUG */ |
| |
| |
| |
| /* |
| |
| malloc_stats: |
| |
| Prints on the amount of space obtain from the system (both |
| via sbrk and mmap), the maximum amount (which may be more than |
| current if malloc_trim and/or munmap got called), the maximum |
| number of simultaneous mmap regions used, and the current number |
| of bytes allocated via malloc (or realloc, etc) but not yet |
| freed. (Note that this is the number of bytes allocated, not the |
| number requested. It will be larger than the number requested |
| because of alignment and bookkeeping overhead.) |
| |
| */ |
| |
| #ifdef DEBUG |
| void malloc_stats() |
| { |
| malloc_update_mallinfo(); |
| printf("max system bytes = %10u\n", |
| (unsigned int)(max_total_mem)); |
| printf("system bytes = %10u\n", |
| (unsigned int)(sbrked_mem + mmapped_mem)); |
| printf("in use bytes = %10u\n", |
| (unsigned int)(current_mallinfo.uordblks + mmapped_mem)); |
| #if HAVE_MMAP |
| printf("max mmap regions = %10u\n", |
| (unsigned int)max_n_mmaps); |
| #endif |
| } |
| #endif /* DEBUG */ |
| |
| /* |
| mallinfo returns a copy of updated current mallinfo. |
| */ |
| |
| #ifdef DEBUG |
| struct mallinfo mALLINFo() |
| { |
| malloc_update_mallinfo(); |
| return current_mallinfo; |
| } |
| #endif /* DEBUG */ |
| |
| |
| |
| |
| /* |
| mallopt: |
| |
| mallopt is the general SVID/XPG interface to tunable parameters. |
| The format is to provide a (parameter-number, parameter-value) pair. |
| mallopt then sets the corresponding parameter to the argument |
| value if it can (i.e., so long as the value is meaningful), |
| and returns 1 if successful else 0. |
| |
| See descriptions of tunable parameters above. |
| |
| */ |
| |
| #if __STD_C |
| int mALLOPt(int param_number, int value) |
| #else |
| int mALLOPt(param_number, value) int param_number; int value; |
| #endif |
| { |
| switch(param_number) |
| { |
| case M_TRIM_THRESHOLD: |
| trim_threshold = value; return 1; |
| case M_TOP_PAD: |
| top_pad = value; return 1; |
| case M_MMAP_THRESHOLD: |
| mmap_threshold = value; return 1; |
| case M_MMAP_MAX: |
| #if HAVE_MMAP |
| n_mmaps_max = value; return 1; |
| #else |
| if (value != 0) return 0; else n_mmaps_max = value; return 1; |
| #endif |
| |
| default: |
| return 0; |
| } |
| } |
| |
| int initf_malloc(void) |
| { |
| #ifdef CONFIG_SYS_MALLOC_F_LEN |
| assert(gd->malloc_base); /* Set up by crt0.S */ |
| gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; |
| gd->malloc_ptr = 0; |
| #endif |
| |
| return 0; |
| } |
| |
| /* |
| |
| History: |
| |
| V2.6.6 Sun Dec 5 07:42:19 1999 Doug Lea (dl at gee) |
| * return null for negative arguments |
| * Added Several WIN32 cleanups from Martin C. Fong <mcfong@yahoo.com> |
| * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h' |
| (e.g. WIN32 platforms) |
| * Cleanup up header file inclusion for WIN32 platforms |
| * Cleanup code to avoid Microsoft Visual C++ compiler complaints |
| * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing |
| memory allocation routines |
| * Set 'malloc_getpagesize' for WIN32 platforms (needs more work) |
| * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to |
| usage of 'assert' in non-WIN32 code |
| * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to |
| avoid infinite loop |
| * Always call 'fREe()' rather than 'free()' |
| |
| V2.6.5 Wed Jun 17 15:57:31 1998 Doug Lea (dl at gee) |
| * Fixed ordering problem with boundary-stamping |
| |
| V2.6.3 Sun May 19 08:17:58 1996 Doug Lea (dl at gee) |
| * Added pvalloc, as recommended by H.J. Liu |
| * Added 64bit pointer support mainly from Wolfram Gloger |
| * Added anonymously donated WIN32 sbrk emulation |
| * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen |
| * malloc_extend_top: fix mask error that caused wastage after |
| foreign sbrks |
| * Add linux mremap support code from HJ Liu |
| |
| V2.6.2 Tue Dec 5 06:52:55 1995 Doug Lea (dl at gee) |
| * Integrated most documentation with the code. |
| * Add support for mmap, with help from |
| Wolfram Gloger (Gloger@lrz.uni-muenchen.de). |
| * Use last_remainder in more cases. |
| * Pack bins using idea from colin@nyx10.cs.du.edu |
| * Use ordered bins instead of best-fit threshhold |
| * Eliminate block-local decls to simplify tracing and debugging. |
| * Support another case of realloc via move into top |
| * Fix error occuring when initial sbrk_base not word-aligned. |
| * Rely on page size for units instead of SBRK_UNIT to |
| avoid surprises about sbrk alignment conventions. |
| * Add mallinfo, mallopt. Thanks to Raymond Nijssen |
| (raymond@es.ele.tue.nl) for the suggestion. |
| * Add `pad' argument to malloc_trim and top_pad mallopt parameter. |
| * More precautions for cases where other routines call sbrk, |
| courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de). |
| * Added macros etc., allowing use in linux libc from |
| H.J. Lu (hjl@gnu.ai.mit.edu) |
| * Inverted this history list |
| |
| V2.6.1 Sat Dec 2 14:10:57 1995 Doug Lea (dl at gee) |
| * Re-tuned and fixed to behave more nicely with V2.6.0 changes. |
| * Removed all preallocation code since under current scheme |
| the work required to undo bad preallocations exceeds |
| the work saved in good cases for most test programs. |
| * No longer use return list or unconsolidated bins since |
| no scheme using them consistently outperforms those that don't |
| given above changes. |
| * Use best fit for very large chunks to prevent some worst-cases. |
| * Added some support for debugging |
| |
| V2.6.0 Sat Nov 4 07:05:23 1995 Doug Lea (dl at gee) |
| * Removed footers when chunks are in use. Thanks to |
| Paul Wilson (wilson@cs.texas.edu) for the suggestion. |
| |
| V2.5.4 Wed Nov 1 07:54:51 1995 Doug Lea (dl at gee) |
| * Added malloc_trim, with help from Wolfram Gloger |
| (wmglo@Dent.MED.Uni-Muenchen.DE). |
| |
| V2.5.3 Tue Apr 26 10:16:01 1994 Doug Lea (dl at g) |
| |
| V2.5.2 Tue Apr 5 16:20:40 1994 Doug Lea (dl at g) |
| * realloc: try to expand in both directions |
| * malloc: swap order of clean-bin strategy; |
| * realloc: only conditionally expand backwards |
| * Try not to scavenge used bins |
| * Use bin counts as a guide to preallocation |
| * Occasionally bin return list chunks in first scan |
| * Add a few optimizations from colin@nyx10.cs.du.edu |
| |
| V2.5.1 Sat Aug 14 15:40:43 1993 Doug Lea (dl at g) |
| * faster bin computation & slightly different binning |
| * merged all consolidations to one part of malloc proper |
| (eliminating old malloc_find_space & malloc_clean_bin) |
| * Scan 2 returns chunks (not just 1) |
| * Propagate failure in realloc if malloc returns 0 |
| * Add stuff to allow compilation on non-ANSI compilers |
| from kpv@research.att.com |
| |
| V2.5 Sat Aug 7 07:41:59 1993 Doug Lea (dl at g.oswego.edu) |
| * removed potential for odd address access in prev_chunk |
| * removed dependency on getpagesize.h |
| * misc cosmetics and a bit more internal documentation |
| * anticosmetics: mangled names in macros to evade debugger strangeness |
| * tested on sparc, hp-700, dec-mips, rs6000 |
| with gcc & native cc (hp, dec only) allowing |
| Detlefs & Zorn comparison study (in SIGPLAN Notices.) |
| |
| Trial version Fri Aug 28 13:14:29 1992 Doug Lea (dl at g.oswego.edu) |
| * Based loosely on libg++-1.2X malloc. (It retains some of the overall |
| structure of old version, but most details differ.) |
| |
| */ |