blob: 13508c45191f537d0b8ed50d7f829252210af35c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* dts file for Xilinx ZynqMP zc1751-xm018-dc4
*
* (C) Copyright 2015 - 2020, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
/ {
model = "ZynqMP zc1751-xm018-dc4";
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
aliases {
can0 = &can0;
can1 = &can1;
ethernet0 = &gem0;
ethernet1 = &gem1;
ethernet2 = &gem2;
ethernet3 = &gem3;
gpio0 = &gpio;
i2c0 = &i2c0;
i2c1 = &i2c1;
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &qspi;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&fpd_dma_chan1 {
status = "okay";
};
&fpd_dma_chan2 {
status = "okay";
};
&fpd_dma_chan3 {
status = "okay";
};
&fpd_dma_chan4 {
status = "okay";
};
&fpd_dma_chan5 {
status = "okay";
};
&fpd_dma_chan6 {
status = "okay";
};
&fpd_dma_chan7 {
status = "okay";
};
&fpd_dma_chan8 {
status = "okay";
};
&lpd_dma_chan1 {
status = "okay";
};
&lpd_dma_chan2 {
status = "okay";
};
&lpd_dma_chan3 {
status = "okay";
};
&lpd_dma_chan4 {
status = "okay";
};
&lpd_dma_chan5 {
status = "okay";
};
&lpd_dma_chan6 {
status = "okay";
};
&lpd_dma_chan7 {
status = "okay";
};
&lpd_dma_chan8 {
status = "okay";
};
&xlnx_dp {
status = "okay";
};
&xlnx_dpdma {
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy0>;
ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
reg = <0>;
};
ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
reg = <7>;
};
ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
reg = <3>;
};
ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
reg = <8>;
};
};
&gem1 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy7>;
};
&gem2 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy3>;
};
&gem3 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy8>;
};
&gpio {
status = "okay";
};
&gpu {
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
};
&qspi {
status = "okay";
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>; /* also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
partition@qspi-fsbl-uboot { /* for testing purpose */
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
partition@qspi-linux { /* for testing purpose */
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
partition@qspi-device-tree { /* for testing purpose */
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
partition@qspi-rootfs { /* for testing purpose */
label = "qspi-rootfs";
reg = <0x620000 0x5E0000>;
};
};
};
&rtc {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&watchdog0 {
status = "okay";
};