| /* |
| * Copyright Altera Corporation (C) 2014-2015 |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <div64.h> |
| #include <watchdog.h> |
| #include <asm/arch/fpga_manager.h> |
| #include <asm/arch/sdram.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/io.h> |
| |
| /* |
| * FIXME: This path is temporary until the SDRAM driver gets |
| * a proper thorough cleanup. |
| */ |
| #include "../../../board/altera/socfpga/qts/sdram_config.h" |
| |
| /* define constant for 4G memory - used for SDRAM errata workaround */ |
| #define MEMSIZE_4G (4ULL * 1024ULL * 1024ULL * 1024ULL) |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct sdram_prot_rule { |
| u64 sdram_start; /* SDRAM start address */ |
| u64 sdram_end; /* SDRAM end address */ |
| u32 rule; /* SDRAM protection rule number: 0-19 */ |
| int valid; /* Rule valid or not? 1 - valid, 0 not*/ |
| |
| u32 security; |
| u32 portmask; |
| u32 result; |
| u32 lo_prot_id; |
| u32 hi_prot_id; |
| }; |
| |
| static struct socfpga_system_manager *sysmgr_regs = |
| (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| static struct socfpga_sdr_ctrl *sdr_ctrl = |
| (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS; |
| |
| static int compute_errata_rows(unsigned long long memsize, int cs, int width, |
| int rows, int banks, int cols) |
| { |
| unsigned long long newrows; |
| int inewrowslog2; |
| int bits; |
| |
| debug("workaround rows - memsize %lld\n", memsize); |
| debug("workaround rows - cs %d\n", cs); |
| debug("workaround rows - width %d\n", width); |
| debug("workaround rows - rows %d\n", rows); |
| debug("workaround rows - banks %d\n", banks); |
| debug("workaround rows - cols %d\n", cols); |
| |
| newrows = lldiv(memsize, (cs * (width / 8))); |
| debug("rows workaround - term1 %lld\n", newrows); |
| |
| newrows = lldiv(newrows, ((1 << banks) * (1 << cols))); |
| debug("rows workaround - term2 %lld\n", newrows); |
| |
| /* Compute the hamming weight - same as number of bits set. |
| * Need to see if result is ordinal power of 2 before |
| * attempting log2 of result. |
| */ |
| bits = hweight32(newrows); |
| |
| debug("rows workaround - bits %d\n", bits); |
| |
| if (bits != 1) { |
| printf("SDRAM workaround failed, bits set %d\n", bits); |
| return rows; |
| } |
| |
| if (newrows > UINT_MAX) { |
| printf("SDRAM workaround rangecheck failed, %lld\n", newrows); |
| return rows; |
| } |
| |
| inewrowslog2 = __ilog2((unsigned int)newrows); |
| |
| debug("rows workaround - ilog2 %d, %d\n", inewrowslog2, |
| (int)newrows); |
| |
| if (inewrowslog2 == -1) { |
| printf("SDRAM workaround failed, newrows %d\n", (int)newrows); |
| return rows; |
| } |
| |
| return inewrowslog2; |
| } |
| |
| /* SDRAM protection rules vary from 0-19, a total of 20 rules. */ |
| static void sdram_set_rule(struct sdram_prot_rule *prule) |
| { |
| uint32_t lo_addr_bits; |
| uint32_t hi_addr_bits; |
| int ruleno = prule->rule; |
| |
| /* Select the rule */ |
| writel(ruleno, &sdr_ctrl->prot_rule_rdwr); |
| |
| /* Obtain the address bits */ |
| lo_addr_bits = (uint32_t)(((prule->sdram_start) >> 20ULL) & 0xFFF); |
| hi_addr_bits = (uint32_t)((((prule->sdram_end-1) >> 20ULL)) & 0xFFF); |
| |
| debug("sdram set rule start %x, %lld\n", lo_addr_bits, |
| prule->sdram_start); |
| debug("sdram set rule end %x, %lld\n", hi_addr_bits, |
| prule->sdram_end); |
| |
| /* Set rule addresses */ |
| writel(lo_addr_bits | (hi_addr_bits << 12), &sdr_ctrl->prot_rule_addr); |
| |
| /* Set rule protection ids */ |
| writel(prule->lo_prot_id | (prule->hi_prot_id << 12), |
| &sdr_ctrl->prot_rule_id); |
| |
| /* Set the rule data */ |
| writel(prule->security | (prule->valid << 2) | |
| (prule->portmask << 3) | (prule->result << 13), |
| &sdr_ctrl->prot_rule_data); |
| |
| /* write the rule */ |
| writel(ruleno | (1L << 5), &sdr_ctrl->prot_rule_rdwr); |
| |
| /* Set rule number to 0 by default */ |
| writel(0, &sdr_ctrl->prot_rule_rdwr); |
| } |
| |
| static void sdram_get_rule(struct sdram_prot_rule *prule) |
| { |
| uint32_t addr; |
| uint32_t id; |
| uint32_t data; |
| int ruleno = prule->rule; |
| |
| /* Read the rule */ |
| writel(ruleno, &sdr_ctrl->prot_rule_rdwr); |
| writel(ruleno | (1L << 6), &sdr_ctrl->prot_rule_rdwr); |
| |
| /* Get the addresses */ |
| addr = readl(&sdr_ctrl->prot_rule_addr); |
| prule->sdram_start = (addr & 0xFFF) << 20; |
| prule->sdram_end = ((addr >> 12) & 0xFFF) << 20; |
| |
| /* Get the configured protection IDs */ |
| id = readl(&sdr_ctrl->prot_rule_id); |
| prule->lo_prot_id = id & 0xFFF; |
| prule->hi_prot_id = (id >> 12) & 0xFFF; |
| |
| /* Get protection data */ |
| data = readl(&sdr_ctrl->prot_rule_data); |
| |
| prule->security = data & 0x3; |
| prule->valid = (data >> 2) & 0x1; |
| prule->portmask = (data >> 3) & 0x3FF; |
| prule->result = (data >> 13) & 0x1; |
| } |
| |
| static void sdram_set_protection_config(uint64_t sdram_start, uint64_t sdram_end) |
| { |
| struct sdram_prot_rule rule; |
| int rules; |
| |
| /* Start with accepting all SDRAM transaction */ |
| writel(0x0, &sdr_ctrl->protport_default); |
| |
| /* Clear all protection rules for warm boot case */ |
| memset(&rule, 0, sizeof(struct sdram_prot_rule)); |
| |
| for (rules = 0; rules < 20; rules++) { |
| rule.rule = rules; |
| sdram_set_rule(&rule); |
| } |
| |
| /* new rule: accept SDRAM */ |
| rule.sdram_start = sdram_start; |
| rule.sdram_end = sdram_end; |
| rule.lo_prot_id = 0x0; |
| rule.hi_prot_id = 0xFFF; |
| rule.portmask = 0x3FF; |
| rule.security = 0x3; |
| rule.result = 0; |
| rule.valid = 1; |
| rule.rule = 0; |
| |
| /* set new rule */ |
| sdram_set_rule(&rule); |
| |
| /* default rule: reject everything */ |
| writel(0x3ff, &sdr_ctrl->protport_default); |
| } |
| |
| static void sdram_dump_protection_config(void) |
| { |
| struct sdram_prot_rule rule; |
| int rules; |
| |
| debug("SDRAM Prot rule, default %x\n", |
| readl(&sdr_ctrl->protport_default)); |
| |
| for (rules = 0; rules < 20; rules++) { |
| sdram_get_rule(&rule); |
| debug("Rule %d, rules ...\n", rules); |
| debug(" sdram start %llx\n", rule.sdram_start); |
| debug(" sdram end %llx\n", rule.sdram_end); |
| debug(" low prot id %d, hi prot id %d\n", |
| rule.lo_prot_id, |
| rule.hi_prot_id); |
| debug(" portmask %x\n", rule.portmask); |
| debug(" security %d\n", rule.security); |
| debug(" result %d\n", rule.result); |
| debug(" valid %d\n", rule.valid); |
| } |
| } |
| |
| /* Function to write to register and verify the write */ |
| static unsigned sdram_write_verify(unsigned int *addr, unsigned reg_value) |
| { |
| #ifndef SDRAM_MMR_SKIP_VERIFY |
| unsigned reg_value1; |
| #endif |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", (u32)addr, reg_value); |
| /* Write to register */ |
| writel(reg_value, addr); |
| #ifndef SDRAM_MMR_SKIP_VERIFY |
| debug(" Read and verify..."); |
| /* Read back the wrote value */ |
| reg_value1 = readl(addr); |
| /* Indicate failure if value not matched */ |
| if (reg_value1 != reg_value) { |
| debug("FAIL - Address 0x%08x Expected 0x%08x Data 0x%08x\n", |
| (u32)addr, reg_value, reg_value1); |
| return 1; |
| } |
| debug("correct!\n"); |
| #endif /* SDRAM_MMR_SKIP_VERIFY */ |
| return 0; |
| } |
| |
| static void set_sdr_ctrlcfg(void) |
| { |
| int addrorder; |
| |
| debug("\nConfiguring CTRLCFG\n"); |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_MEMTYPE_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE << |
| SDR_CTRLGRP_CTRLCFG_MEMTYPE_LSB); |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_MEMBL_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL << |
| SDR_CTRLGRP_CTRLCFG_MEMBL_LSB); |
| |
| |
| /* SDRAM Failure When Accessing Non-Existent Memory |
| * Set the addrorder field of the SDRAM control register |
| * based on the CSBITs setting. |
| */ |
| switch (CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS) { |
| case 1: |
| addrorder = 0; /* chip, row, bank, column */ |
| if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER != 0) |
| debug("INFO: Changing address order to 0 (chip, row, \ |
| bank, column)\n"); |
| break; |
| case 2: |
| addrorder = 2; /* row, chip, bank, column */ |
| if (CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER != 2) |
| debug("INFO: Changing address order to 2 (row, chip, \ |
| bank, column)\n"); |
| break; |
| default: |
| addrorder = CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER; |
| break; |
| } |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_ADDRORDER_MASK, |
| addrorder << SDR_CTRLGRP_CTRLCFG_ADDRORDER_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_ECCEN_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN << |
| SDR_CTRLGRP_CTRLCFG_ECCEN_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_ECCCORREN_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN << |
| SDR_CTRLGRP_CTRLCFG_ECCCORREN_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_REORDEREN_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN << |
| SDR_CTRLGRP_CTRLCFG_REORDEREN_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_STARVELIMIT_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT << |
| SDR_CTRLGRP_CTRLCFG_STARVELIMIT_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_DQSTRKEN_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN << |
| SDR_CTRLGRP_CTRLCFG_DQSTRKEN_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_NODMPINS_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS << |
| SDR_CTRLGRP_CTRLCFG_NODMPINS_LSB); |
| } |
| |
| static void set_sdr_dram_timing1(void) |
| { |
| debug("Configuring DRAMTIMING1\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TCWL_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL << |
| SDR_CTRLGRP_DRAMTIMING1_TCWL_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TAL_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL << |
| SDR_CTRLGRP_DRAMTIMING1_TAL_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TCL_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL << |
| SDR_CTRLGRP_DRAMTIMING1_TCL_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TRRD_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD << |
| SDR_CTRLGRP_DRAMTIMING1_TRRD_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TFAW_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW << |
| SDR_CTRLGRP_DRAMTIMING1_TFAW_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing1, SDR_CTRLGRP_DRAMTIMING1_TRFC_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC << |
| SDR_CTRLGRP_DRAMTIMING1_TRFC_LSB); |
| } |
| |
| static void set_sdr_dram_timing2(void) |
| { |
| debug("Configuring DRAMTIMING2\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TREFI_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI << |
| SDR_CTRLGRP_DRAMTIMING2_TREFI_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TRCD_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD << |
| SDR_CTRLGRP_DRAMTIMING2_TRCD_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TRP_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP << |
| SDR_CTRLGRP_DRAMTIMING2_TRP_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TWR_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR << |
| SDR_CTRLGRP_DRAMTIMING2_TWR_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing2, SDR_CTRLGRP_DRAMTIMING2_TWTR_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR << |
| SDR_CTRLGRP_DRAMTIMING2_TWTR_LSB); |
| } |
| |
| static void set_sdr_dram_timing3(void) |
| { |
| debug("Configuring DRAMTIMING3\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TRTP_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP << |
| SDR_CTRLGRP_DRAMTIMING3_TRTP_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TRAS_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS << |
| SDR_CTRLGRP_DRAMTIMING3_TRAS_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TRC_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC << |
| SDR_CTRLGRP_DRAMTIMING3_TRC_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TMRD_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD << |
| SDR_CTRLGRP_DRAMTIMING3_TMRD_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing3, SDR_CTRLGRP_DRAMTIMING3_TCCD_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD << |
| SDR_CTRLGRP_DRAMTIMING3_TCCD_LSB); |
| } |
| |
| static void set_sdr_dram_timing4(void) |
| { |
| debug("Configuring DRAMTIMING4\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_timing4, |
| SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT << |
| SDR_CTRLGRP_DRAMTIMING4_SELFRFSHEXIT_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_timing4, |
| SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT << |
| SDR_CTRLGRP_DRAMTIMING4_PWRDOWNEXIT_LSB); |
| } |
| |
| static void set_sdr_dram_lowpwr_timing(void) |
| { |
| debug("Configuring LOWPWRTIMING\n"); |
| clrsetbits_le32(&sdr_ctrl->lowpwr_timing, |
| SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES << |
| SDR_CTRLGRP_LOWPWRTIMING_AUTOPDCYCLES_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->lowpwr_timing, |
| SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES << |
| SDR_CTRLGRP_LOWPWRTIMING_CLKDISABLECYCLES_LSB); |
| } |
| |
| static void set_sdr_addr_rw(void) |
| { |
| int cs = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS; |
| int width = 8; |
| int rows = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS; |
| int banks = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS; |
| int cols = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS; |
| unsigned long long workaround_memsize = MEMSIZE_4G; |
| |
| debug("Configuring DRAMADDRW\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS << |
| SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB); |
| /* |
| * SDRAM Failure When Accessing Non-Existent Memory |
| * Update Preloader to artificially increase the number of rows so |
| * that the memory thinks it has 4GB of RAM. |
| */ |
| rows = compute_errata_rows(workaround_memsize, cs, width, rows, banks, |
| cols); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK, |
| rows << SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS << |
| SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB); |
| /* SDRAM Failure When Accessing Non-Existent Memory |
| * Set SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB to |
| * log2(number of chip select bits). Since there's only |
| * 1 or 2 chip selects, log2(1) => 0, and log2(2) => 1, |
| * which is the same as "chip selects" - 1. |
| */ |
| clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK, |
| (CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS - 1) << |
| SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB); |
| } |
| |
| static void set_sdr_static_cfg(void) |
| { |
| debug("Configuring STATICCFG\n"); |
| clrsetbits_le32(&sdr_ctrl->static_cfg, SDR_CTRLGRP_STATICCFG_MEMBL_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL << |
| SDR_CTRLGRP_STATICCFG_MEMBL_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->static_cfg, |
| SDR_CTRLGRP_STATICCFG_USEECCASDATA_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA << |
| SDR_CTRLGRP_STATICCFG_USEECCASDATA_LSB); |
| } |
| |
| static void set_sdr_fifo_cfg(void) |
| { |
| debug("Configuring FIFOCFG\n"); |
| clrsetbits_le32(&sdr_ctrl->fifo_cfg, SDR_CTRLGRP_FIFOCFG_SYNCMODE_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE << |
| SDR_CTRLGRP_FIFOCFG_SYNCMODE_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->fifo_cfg, SDR_CTRLGRP_FIFOCFG_INCSYNC_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC << |
| SDR_CTRLGRP_FIFOCFG_INCSYNC_LSB); |
| } |
| |
| static void set_sdr_mp_weight(void) |
| { |
| debug("Configuring MPWEIGHT_MPWEIGHT_0\n"); |
| clrsetbits_le32(&sdr_ctrl->mp_weight0, |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 << |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_0_STATICWEIGHT_31_0_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_weight1, |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 << |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_STATICWEIGHT_49_32_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_weight1, |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 << |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_1_SUMOFWEIGHTS_13_0_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_weight2, |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 << |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_2_SUMOFWEIGHTS_45_14_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_weight3, |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 << |
| SDR_CTRLGRP_MPWEIGHT_MPWEIGHT_3_SUMOFWEIGHTS_63_46_LSB); |
| } |
| |
| static void set_sdr_mp_pacing(void) |
| { |
| debug("Configuring MPPACING_MPPACING_0\n"); |
| clrsetbits_le32(&sdr_ctrl->mp_pacing0, |
| SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 << |
| SDR_CTRLGRP_MPPACING_MPPACING_0_THRESHOLD1_31_0_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_pacing1, |
| SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 << |
| SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD1_59_32_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_pacing1, |
| SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 << |
| SDR_CTRLGRP_MPPACING_MPPACING_1_THRESHOLD2_3_0_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_pacing2, |
| SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 << |
| SDR_CTRLGRP_MPPACING_MPPACING_2_THRESHOLD2_35_4_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_pacing3, |
| SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 << |
| SDR_CTRLGRP_MPPACING_MPPACING_3_THRESHOLD2_59_36_LSB); |
| } |
| |
| static void set_sdr_mp_threshold(void) |
| { |
| debug("Configuring MPTHRESHOLDRST_MPTHRESHOLDRST_0\n"); |
| clrsetbits_le32(&sdr_ctrl->mp_threshold0, |
| SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 << |
| SDR_CTRLGRP_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_threshold1, |
| SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 << |
| SDR_CTRLGRP_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->mp_threshold2, |
| SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 << |
| SDR_CTRLGRP_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64_LSB); |
| } |
| |
| |
| /* Function to initialize SDRAM MMR */ |
| unsigned sdram_mmr_init_full(unsigned int sdr_phy_reg) |
| { |
| unsigned long reg_value; |
| unsigned long status = 0; |
| |
| #if defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS) && \ |
| defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS) && \ |
| defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS) && \ |
| defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS) && \ |
| defined(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS) |
| |
| writel(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS, |
| &sysmgr_regs->iswgrp_handoff[4]); |
| #endif |
| set_sdr_ctrlcfg(); |
| set_sdr_dram_timing1(); |
| set_sdr_dram_timing2(); |
| set_sdr_dram_timing3(); |
| set_sdr_dram_timing4(); |
| set_sdr_dram_lowpwr_timing(); |
| set_sdr_addr_rw(); |
| |
| debug("Configuring DRAMIFWIDTH\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_if_width, |
| SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH << |
| SDR_CTRLGRP_DRAMIFWIDTH_IFWIDTH_LSB); |
| |
| debug("Configuring DRAMDEVWIDTH\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_dev_width, |
| SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH << |
| SDR_CTRLGRP_DRAMDEVWIDTH_DEVWIDTH_LSB); |
| |
| debug("Configuring LOWPWREQ\n"); |
| clrsetbits_le32(&sdr_ctrl->lowpwr_eq, |
| SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK << |
| SDR_CTRLGRP_LOWPWREQ_SELFRFSHMASK_LSB); |
| |
| debug("Configuring DRAMINTR\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_intr, SDR_CTRLGRP_DRAMINTR_INTREN_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN << |
| SDR_CTRLGRP_DRAMINTR_INTREN_LSB); |
| |
| set_sdr_static_cfg(); |
| |
| debug("Configuring CTRLWIDTH\n"); |
| clrsetbits_le32(&sdr_ctrl->ctrl_width, |
| SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH << |
| SDR_CTRLGRP_CTRLWIDTH_CTRLWIDTH_LSB); |
| |
| debug("Configuring PORTCFG\n"); |
| clrsetbits_le32(&sdr_ctrl->port_cfg, SDR_CTRLGRP_PORTCFG_AUTOPCHEN_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN << |
| SDR_CTRLGRP_PORTCFG_AUTOPCHEN_LSB); |
| |
| set_sdr_fifo_cfg(); |
| |
| debug("Configuring MPPRIORITY\n"); |
| clrsetbits_le32(&sdr_ctrl->mp_priority, |
| SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY << |
| SDR_CTRLGRP_MPPRIORITY_USERPRIORITY_LSB); |
| |
| set_sdr_mp_weight(); |
| set_sdr_mp_pacing(); |
| set_sdr_mp_threshold(); |
| |
| debug("Configuring PHYCTRL_PHYCTRL_0\n"); |
| setbits_le32(&sdr_ctrl->phy_ctrl0, |
| CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0); |
| |
| debug("Configuring CPORTWIDTH\n"); |
| clrsetbits_le32(&sdr_ctrl->cport_width, |
| SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH << |
| SDR_CTRLGRP_CPORTWIDTH_CMDPORTWIDTH_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->cport_width), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->cport_width); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| debug("Configuring CPORTWMAP\n"); |
| clrsetbits_le32(&sdr_ctrl->cport_wmap, |
| SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP << |
| SDR_CTRLGRP_CPORTWMAP_CPORTWFIFOMAP_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->cport_wmap), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->cport_wmap); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| debug("Configuring CPORTRMAP\n"); |
| clrsetbits_le32(&sdr_ctrl->cport_rmap, |
| SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP << |
| SDR_CTRLGRP_CPORTRMAP_CPORTRFIFOMAP_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->cport_rmap), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->cport_rmap); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| debug("Configuring RFIFOCMAP\n"); |
| clrsetbits_le32(&sdr_ctrl->rfifo_cmap, |
| SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP << |
| SDR_CTRLGRP_RFIFOCMAP_RFIFOCPORTMAP_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->rfifo_cmap), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->rfifo_cmap); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| debug("Configuring WFIFOCMAP\n"); |
| reg_value = readl(&sdr_ctrl->wfifo_cmap); |
| clrsetbits_le32(&sdr_ctrl->wfifo_cmap, |
| SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP << |
| SDR_CTRLGRP_WFIFOCMAP_WFIFOCPORTMAP_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->wfifo_cmap), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->wfifo_cmap); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| debug("Configuring CPORTRDWR\n"); |
| clrsetbits_le32(&sdr_ctrl->cport_rdwr, |
| SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR << |
| SDR_CTRLGRP_CPORTRDWR_CPORTRDWR_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->cport_rdwr), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->cport_rdwr); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| debug("Configuring DRAMODT\n"); |
| clrsetbits_le32(&sdr_ctrl->dram_odt, |
| SDR_CTRLGRP_DRAMODT_READ_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ << |
| SDR_CTRLGRP_DRAMODT_READ_LSB); |
| |
| clrsetbits_le32(&sdr_ctrl->dram_odt, |
| SDR_CTRLGRP_DRAMODT_WRITE_MASK, |
| CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE << |
| SDR_CTRLGRP_DRAMODT_WRITE_LSB); |
| |
| /* saving this value to SYSMGR.ISWGRP.HANDOFF.FPGA2SDR */ |
| writel(CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST, |
| &sysmgr_regs->iswgrp_handoff[3]); |
| |
| /* only enable if the FPGA is programmed */ |
| if (fpgamgr_test_fpga_ready()) { |
| if (sdram_write_verify(&sdr_ctrl->fpgaport_rst, |
| CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST) == 1) { |
| status = 1; |
| return 1; |
| } |
| } |
| |
| /* Restore the SDR PHY Register if valid */ |
| if (sdr_phy_reg != 0xffffffff) |
| writel(sdr_phy_reg, &sdr_ctrl->phy_ctrl0); |
| |
| /***** Final step - apply configuration changes *****/ |
| debug("Configuring STATICCFG_\n"); |
| clrsetbits_le32(&sdr_ctrl->static_cfg, SDR_CTRLGRP_STATICCFG_APPLYCFG_MASK, |
| 1 << SDR_CTRLGRP_STATICCFG_APPLYCFG_LSB); |
| debug(" Write - Address "); |
| debug("0x%08x Data 0x%08x\n", |
| (unsigned)(&sdr_ctrl->static_cfg), |
| (unsigned)reg_value); |
| reg_value = readl(&sdr_ctrl->static_cfg); |
| debug(" Read value without verify 0x%08x\n", (unsigned)reg_value); |
| |
| sdram_set_protection_config(0, sdram_calculate_size()); |
| |
| sdram_dump_protection_config(); |
| |
| return status; |
| } |
| |
| /* |
| * To calculate SDRAM device size based on SDRAM controller parameters. |
| * Size is specified in bytes. |
| * |
| * NOTE: |
| * This function is compiled and linked into the preloader and |
| * Uboot (there may be others). So if this function changes, the Preloader |
| * and UBoot must be updated simultaneously. |
| */ |
| unsigned long sdram_calculate_size(void) |
| { |
| unsigned long temp; |
| unsigned long row, bank, col, cs, width; |
| |
| temp = readl(&sdr_ctrl->dram_addrw); |
| col = (temp & SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB; |
| |
| /* SDRAM Failure When Accessing Non-Existent Memory |
| * Use ROWBITS from Quartus/QSys to calculate SDRAM size |
| * since the FB specifies we modify ROWBITs to work around SDRAM |
| * controller issue. |
| * |
| * If the stored handoff value for rows is 0, it probably means |
| * the preloader is older than UBoot. Use the |
| * #define from the SOCEDS Tools per Crucible review |
| * uboot-socfpga-204. Note that this is not a supported |
| * configuration and is not tested. The customer |
| * should be using preloader and uboot built from the |
| * same tag. |
| */ |
| row = readl(&sysmgr_regs->iswgrp_handoff[4]); |
| if (row == 0) |
| row = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS; |
| /* If the stored handoff value for rows is greater than |
| * the field width in the sdr.dramaddrw register then |
| * something is very wrong. Revert to using the the #define |
| * value handed off by the SOCEDS tool chain instead of |
| * using a broken value. |
| */ |
| if (row > 31) |
| row = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS; |
| |
| bank = (temp & SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB; |
| |
| /* SDRAM Failure When Accessing Non-Existent Memory |
| * Use CSBITs from Quartus/QSys to calculate SDRAM size |
| * since the FB specifies we modify CSBITs to work around SDRAM |
| * controller issue. |
| */ |
| cs = (temp & SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB; |
| cs += 1; |
| |
| cs = CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS; |
| |
| width = readl(&sdr_ctrl->dram_if_width); |
| /* ECC would not be calculated as its not addressible */ |
| if (width == SDRAM_WIDTH_32BIT_WITH_ECC) |
| width = 32; |
| if (width == SDRAM_WIDTH_16BIT_WITH_ECC) |
| width = 16; |
| |
| /* calculate the SDRAM size base on this info */ |
| temp = 1 << (row + bank + col); |
| temp = temp * cs * (width / 8); |
| |
| debug("sdram_calculate_memory returns %ld\n", temp); |
| |
| return temp; |
| } |