| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Synopsys, Inc. All rights reserved. |
| */ |
| |
| / { |
| aliases { |
| spi0 = &spi0; |
| }; |
| |
| axs10x_mb@e0000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0xe0000000 0x10000000>; |
| bootph-all; |
| |
| clocks { |
| compatible = "simple-bus"; |
| bootph-all; |
| |
| apbclk: apbclk { |
| compatible = "fixed-clock"; |
| clock-frequency = <50000000>; |
| #clock-cells = <0>; |
| }; |
| |
| uartclk: uartclk { |
| compatible = "fixed-clock"; |
| clock-frequency = <33333333>; |
| #clock-cells = <0>; |
| bootph-all; |
| }; |
| |
| mmcclk_ciu: mmcclk-ciu { |
| compatible = "fixed-clock"; |
| /* |
| * DW sdio controller has external ciu clock divider |
| * controlled via register in SDIO IP. It divides |
| * sdio_ref_clk (which comes from CGU) by 16 for |
| * default. So default mmcclk clock (which comes |
| * to sdk_in) is 25000000 Hz. |
| */ |
| clock-frequency = <25000000>; |
| #clock-cells = <0>; |
| }; |
| |
| mmcclk_biu: mmcclk-biu { |
| compatible = "fixed-clock"; |
| clock-frequency = <50000000>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| ethernet@18000 { |
| compatible = "snps,arc-dwmac-3.70a"; |
| reg = < 0x18000 0x2000 >; |
| phy-mode = "gmii"; |
| snps,pbl = < 32 >; |
| clocks = <&apbclk>; |
| clock-names = "stmmaceth"; |
| max-speed = <100>; |
| }; |
| |
| ehci@40000 { |
| compatible = "generic-ehci"; |
| reg = < 0x40000 0x100 >; |
| }; |
| |
| ohci@60000 { |
| compatible = "generic-ohci"; |
| reg = < 0x60000 0x100 >; |
| }; |
| |
| mmc: mmc@15000 { |
| compatible = "snps,dw-mshc"; |
| reg = <0x15000 0x400>; |
| bus-width = <4>; |
| clocks = <&mmcclk_biu>, <&mmcclk_ciu>; |
| clock-names = "biu", "ciu"; |
| max-frequency = <25000000>; |
| }; |
| |
| uart0: serial0@22000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x22000 0x100>; |
| clocks = <&uartclk>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| spi0: spi@0 { |
| compatible = "snps,axs10x-spi", "snps,dw-apb-ssi"; |
| reg = <0x0 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| spi-max-frequency = <4000000>; |
| clocks = <&apbclk>; |
| clock-names = "spi_clk"; |
| num-cs = <1>; |
| cs-gpios = <&cs_gpio 0>; |
| spi_flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <4000000>; |
| }; |
| }; |
| |
| cs_gpio: gpio@11218 { |
| compatible = "snps,creg-gpio"; |
| reg = <0x11218 0x4>; |
| gpio-controller; |
| #gpio-cells = <1>; |
| gpio-bank-name = "axs-spi-cs"; |
| gpio-count = <1>; |
| gpio-first-shift = <0>; |
| gpio-bit-per-line = <2>; |
| gpio-activate-val = <1>; |
| gpio-deactivate-val = <3>; |
| gpio-default-val = <1>; |
| }; |
| }; |
| }; |