blob: bdd6ce20da61245eaaacf79498dd03ea1a463cc3 [file] [log] [blame]
/*
* efi_selftest_snp
*
* Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*
* This unit test covers the Simple Network Protocol as well as
* the CopyMem and SetMem boottime services.
*
* A DHCP discover message is sent. The test is successful if a
* DHCP reply is received.
*
* TODO: Once ConnectController and DisconnectController are implemented
* we should connect our code as controller.
*/
#include <efi_selftest.h>
/*
* MAC address for broadcasts
*/
static const u8 BROADCAST_MAC[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
struct dhcp_hdr {
u8 op;
#define BOOTREQUEST 1
#define BOOTREPLY 2
u8 htype;
# define HWT_ETHER 1
u8 hlen;
# define HWL_ETHER 6
u8 hops;
u32 xid;
u16 secs;
u16 flags;
#define DHCP_FLAGS_UNICAST 0x0000
#define DHCP_FLAGS_BROADCAST 0x0080
u32 ciaddr;
u32 yiaddr;
u32 siaddr;
u32 giaddr;
u8 chaddr[16];
u8 sname[64];
u8 file[128];
};
/*
* Message type option.
*/
#define DHCP_MESSAGE_TYPE 0x35
#define DHCPDISCOVER 1
#define DHCPOFFER 2
#define DHCPREQUEST 3
#define DHCPDECLINE 4
#define DHCPACK 5
#define DHCPNAK 6
#define DHCPRELEASE 7
struct dhcp {
struct ethernet_hdr eth_hdr;
struct ip_udp_hdr ip_udp;
struct dhcp_hdr dhcp_hdr;
u8 opt[128];
} __packed;
static struct efi_boot_services *boottime;
static struct efi_simple_network *net;
static struct efi_event *timer;
static const efi_guid_t efi_net_guid = EFI_SIMPLE_NETWORK_GUID;
/* IP packet ID */
static unsigned int net_ip_id;
/*
* Compute the checksum of the IP header. We cover even values of length only.
* We cannot use net/checksum.c due to different CFLAGS values.
*
* @buf: IP header
* @len: length of header in bytes
* @return: checksum
*/
static unsigned int efi_ip_checksum(const void *buf, size_t len)
{
size_t i;
u32 sum = 0;
const u16 *pos = buf;
for (i = 0; i < len; i += 2)
sum += *pos++;
sum = (sum >> 16) + (sum & 0xffff);
sum += sum >> 16;
sum = ~sum & 0xffff;
return sum;
}
/*
* Transmit a DHCPDISCOVER message.
*/
static efi_status_t send_dhcp_discover(void)
{
efi_status_t ret;
struct dhcp p = {};
/*
* Fill ethernet header
*/
boottime->copy_mem(p.eth_hdr.et_dest, (void *)BROADCAST_MAC, ARP_HLEN);
boottime->copy_mem(p.eth_hdr.et_src, &net->mode->current_address,
ARP_HLEN);
p.eth_hdr.et_protlen = htons(PROT_IP);
/*
* Fill IP header
*/
p.ip_udp.ip_hl_v = 0x45;
p.ip_udp.ip_len = htons(sizeof(struct dhcp) -
sizeof(struct ethernet_hdr));
p.ip_udp.ip_id = htons(++net_ip_id);
p.ip_udp.ip_off = htons(IP_FLAGS_DFRAG);
p.ip_udp.ip_ttl = 0xff; /* time to live */
p.ip_udp.ip_p = IPPROTO_UDP;
boottime->set_mem(&p.ip_udp.ip_dst, 4, 0xff);
p.ip_udp.ip_sum = efi_ip_checksum(&p.ip_udp, IP_HDR_SIZE);
/*
* Fill UDP header
*/
p.ip_udp.udp_src = htons(68);
p.ip_udp.udp_dst = htons(67);
p.ip_udp.udp_len = htons(sizeof(struct dhcp) -
sizeof(struct ethernet_hdr) -
sizeof(struct ip_hdr));
/*
* Fill DHCP header
*/
p.dhcp_hdr.op = BOOTREQUEST;
p.dhcp_hdr.htype = HWT_ETHER;
p.dhcp_hdr.hlen = HWL_ETHER;
p.dhcp_hdr.flags = htons(DHCP_FLAGS_UNICAST);
boottime->copy_mem(&p.dhcp_hdr.chaddr,
&net->mode->current_address, ARP_HLEN);
/*
* Fill options
*/
p.opt[0] = 0x63; /* DHCP magic cookie */
p.opt[1] = 0x82;
p.opt[2] = 0x53;
p.opt[3] = 0x63;
p.opt[4] = DHCP_MESSAGE_TYPE;
p.opt[5] = 0x01; /* length */
p.opt[6] = DHCPDISCOVER;
p.opt[7] = 0x39; /* maximum message size */
p.opt[8] = 0x02; /* length */
p.opt[9] = 0x02; /* 576 bytes */
p.opt[10] = 0x40;
p.opt[11] = 0xff; /* end of options */
/*
* Transmit DHCPDISCOVER message.
*/
ret = net->transmit(net, 0, sizeof(struct dhcp), &p, NULL, NULL, 0);
if (ret != EFI_SUCCESS)
efi_st_error("Sending a DHCP request failed\n");
else
efi_st_printf("DHCP Discover\n");
return ret;
}
/*
* Setup unit test.
*
* Create a 1 s periodic timer.
* Start the network driver.
*
* @handle: handle of the loaded image
* @systable: system table
* @return: EFI_ST_SUCCESS for success
*/
static int setup(const efi_handle_t handle,
const struct efi_system_table *systable)
{
efi_status_t ret;
boottime = systable->boottime;
/*
* Create a timer event.
*/
ret = boottime->create_event(EVT_TIMER, TPL_CALLBACK, NULL, NULL,
&timer);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to create event\n");
return EFI_ST_FAILURE;
}
/*
* Set timer period to 1s.
*/
ret = boottime->set_timer(timer, EFI_TIMER_PERIODIC, 10000000);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to set timer\n");
return EFI_ST_FAILURE;
}
/*
* Find an interface implementing the SNP protocol.
*/
ret = boottime->locate_protocol(&efi_net_guid, NULL, (void **)&net);
if (ret != EFI_SUCCESS) {
net = NULL;
efi_st_error("Failed to locate simple network protocol\n");
return EFI_ST_FAILURE;
}
/*
* Check hardware address size.
*/
if (!net->mode) {
efi_st_error("Mode not provided\n");
return EFI_ST_FAILURE;
}
if (net->mode->hwaddr_size != ARP_HLEN) {
efi_st_error("HwAddressSize = %u, expected %u\n",
net->mode->hwaddr_size, ARP_HLEN);
return EFI_ST_FAILURE;
}
/*
* Check that WaitForPacket event exists.
*/
if (!net->wait_for_packet) {
efi_st_error("WaitForPacket event missing\n");
return EFI_ST_FAILURE;
}
/*
* Initialize network adapter.
*/
ret = net->initialize(net, 0, 0);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to initialize network adapter\n");
return EFI_ST_FAILURE;
}
/*
* Start network adapter.
*/
ret = net->start(net);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to start network adapter\n");
return EFI_ST_FAILURE;
}
return EFI_ST_SUCCESS;
}
/*
* Execute unit test.
*
* A DHCP discover message is sent. The test is successful if a
* DHCP reply is received within 10 seconds.
*
* @return: EFI_ST_SUCCESS for success
*/
static int execute(void)
{
efi_status_t ret;
struct efi_event *events[2];
size_t index;
union {
struct dhcp p;
u8 b[PKTSIZE];
} buffer;
struct efi_mac_address srcaddr;
struct efi_mac_address destaddr;
size_t buffer_size;
u8 *addr;
/*
* The timeout is to occur after 10 s.
*/
unsigned int timeout = 10;
/* Setup may have failed */
if (!net || !timer) {
efi_st_error("Cannot execute test after setup failure\n");
return EFI_ST_FAILURE;
}
/*
* Send DHCP discover message
*/
ret = send_dhcp_discover();
if (ret != EFI_SUCCESS)
return EFI_ST_FAILURE;
/*
* If we would call WaitForEvent only with the WaitForPacket event,
* our code would block until a packet is received which might never
* occur. By calling WaitFor event with both a timer event and the
* WaitForPacket event we can escape this blocking situation.
*
* If the timer event occurs before we have received a DHCP reply
* a further DHCP discover message is sent.
*/
events[0] = timer;
events[1] = net->wait_for_packet;
for (;;) {
/*
* Wait for packet to be received or timer event.
*/
boottime->wait_for_event(2, events, &index);
if (index == 0) {
/*
* The timer event occurred. Check for timeout.
*/
--timeout;
if (!timeout) {
efi_st_error("Timeout occurred\n");
return EFI_ST_FAILURE;
}
/*
* Send further DHCP discover message
*/
ret = send_dhcp_discover();
if (ret != EFI_SUCCESS)
return EFI_ST_FAILURE;
continue;
}
/*
* Receive packet
*/
buffer_size = sizeof(buffer);
net->receive(net, NULL, &buffer_size, &buffer,
&srcaddr, &destaddr, NULL);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to receive packet");
return EFI_ST_FAILURE;
}
/*
* Check the packet is meant for this system.
* Unfortunately QEMU ignores the broadcast flag.
* So we have to check for broadcasts too.
*/
if (efi_st_memcmp(&destaddr, &net->mode->current_address,
ARP_HLEN) &&
efi_st_memcmp(&destaddr, BROADCAST_MAC, ARP_HLEN))
continue;
/*
* Check this is a DHCP reply
*/
if (buffer.p.eth_hdr.et_protlen != ntohs(PROT_IP) ||
buffer.p.ip_udp.ip_hl_v != 0x45 ||
buffer.p.ip_udp.ip_p != IPPROTO_UDP ||
buffer.p.ip_udp.udp_src != ntohs(67) ||
buffer.p.ip_udp.udp_dst != ntohs(68) ||
buffer.p.dhcp_hdr.op != BOOTREPLY)
continue;
/*
* We successfully received a DHCP reply.
*/
break;
}
/*
* Write a log message.
*/
addr = (u8 *)&buffer.p.ip_udp.ip_src;
efi_st_printf("DHCP reply received from %u.%u.%u.%u (%pm) ",
addr[0], addr[1], addr[2], addr[3], &srcaddr);
if (!efi_st_memcmp(&destaddr, BROADCAST_MAC, ARP_HLEN))
efi_st_printf("as broadcast message.\n");
else
efi_st_printf("as unicast message.\n");
return EFI_ST_SUCCESS;
}
/*
* Tear down unit test.
*
* Close the timer event created in setup.
* Shut down the network adapter.
*
* @return: EFI_ST_SUCCESS for success
*/
static int teardown(void)
{
efi_status_t ret;
int exit_status = EFI_ST_SUCCESS;
if (timer) {
/*
* Stop timer.
*/
ret = boottime->set_timer(timer, EFI_TIMER_STOP, 0);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to stop timer");
exit_status = EFI_ST_FAILURE;
}
/*
* Close timer event.
*/
ret = boottime->close_event(timer);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to close event");
exit_status = EFI_ST_FAILURE;
}
}
if (net) {
/*
* Stop network adapter.
*/
ret = net->stop(net);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to stop network adapter\n");
exit_status = EFI_ST_FAILURE;
}
/*
* Shut down network adapter.
*/
ret = net->shutdown(net);
if (ret != EFI_SUCCESS) {
efi_st_error("Failed to shut down network adapter\n");
exit_status = EFI_ST_FAILURE;
}
}
return exit_status;
}
EFI_UNIT_TEST(snp) = {
.name = "simple network protocol",
.phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
.setup = setup,
.execute = execute,
.teardown = teardown,
};