| /* |
| * Copyright (C) 2012 Samsung Electronics |
| * R. Chandrasekar <rcsekar@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <malloc.h> |
| #include <common.h> |
| #include <asm/io.h> |
| #include <libfdt.h> |
| #include <fdtdec.h> |
| #include <i2c.h> |
| #include <i2s.h> |
| #include <sound.h> |
| #include <asm/arch/sound.h> |
| #include "wm8994.h" |
| #include "max98095.h" |
| |
| /* defines */ |
| #define SOUND_400_HZ 400 |
| #define SOUND_BITS_IN_BYTE 8 |
| |
| static struct i2stx_info g_i2stx_pri; |
| |
| /* |
| * get_sound_i2s_values gets values for i2s parameters |
| * |
| * @param i2stx_info i2s transmitter transfer param structure |
| * @param blob FDT blob if enabled else NULL |
| */ |
| static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob) |
| { |
| int node; |
| int error = 0; |
| int base; |
| |
| node = fdt_path_offset(blob, "i2s"); |
| if (node <= 0) { |
| debug("EXYNOS_SOUND: No node for sound in device tree\n"); |
| return -1; |
| } |
| |
| /* |
| * Get the pre-defined sound specific values from FDT. |
| * All of these are expected to be correct otherwise |
| * wrong register values in i2s setup parameters |
| * may result in no sound play. |
| */ |
| base = fdtdec_get_addr(blob, node, "reg"); |
| if (base == FDT_ADDR_T_NONE) { |
| debug("%s: Missing i2s base\n", __func__); |
| return -1; |
| } |
| i2s->base_address = base; |
| |
| i2s->audio_pll_clk = fdtdec_get_int(blob, |
| node, "samsung,i2s-epll-clock-frequency", -1); |
| error |= i2s->audio_pll_clk; |
| debug("audio_pll_clk = %d\n", i2s->audio_pll_clk); |
| i2s->samplingrate = fdtdec_get_int(blob, |
| node, "samsung,i2s-sampling-rate", -1); |
| error |= i2s->samplingrate; |
| debug("samplingrate = %d\n", i2s->samplingrate); |
| i2s->bitspersample = fdtdec_get_int(blob, |
| node, "samsung,i2s-bits-per-sample", -1); |
| error |= i2s->bitspersample; |
| debug("bitspersample = %d\n", i2s->bitspersample); |
| i2s->channels = fdtdec_get_int(blob, |
| node, "samsung,i2s-channels", -1); |
| error |= i2s->channels; |
| debug("channels = %d\n", i2s->channels); |
| i2s->rfs = fdtdec_get_int(blob, |
| node, "samsung,i2s-lr-clk-framesize", -1); |
| error |= i2s->rfs; |
| debug("rfs = %d\n", i2s->rfs); |
| i2s->bfs = fdtdec_get_int(blob, |
| node, "samsung,i2s-bit-clk-framesize", -1); |
| error |= i2s->bfs; |
| debug("bfs = %d\n", i2s->bfs); |
| |
| i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1); |
| error |= i2s->id; |
| debug("id = %d\n", i2s->id); |
| |
| if (error == -1) { |
| debug("fail to get sound i2s node properties\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Init codec |
| * |
| * @param blob FDT blob |
| * @param pi2s_tx i2s parameters required by codec |
| * @return int value, 0 for success |
| */ |
| static int codec_init(const void *blob, struct i2stx_info *pi2s_tx) |
| { |
| int ret; |
| const char *codectype; |
| int node; |
| |
| /* Get the node from FDT for sound */ |
| node = fdt_path_offset(blob, "i2s"); |
| if (node <= 0) { |
| debug("EXYNOS_SOUND: No node for sound in device tree\n"); |
| debug("node = %d\n", node); |
| return -1; |
| } |
| |
| /* |
| * Get the pre-defined sound codec specific values from FDT. |
| * All of these are expected to be correct otherwise sound |
| * can not be played |
| */ |
| codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL); |
| debug("device = %s\n", codectype); |
| if (!strcmp(codectype, "wm8994")) { |
| /* Check the codec type and initialise the same */ |
| ret = wm8994_init(blob, pi2s_tx->id + 1, |
| pi2s_tx->samplingrate, |
| (pi2s_tx->samplingrate * (pi2s_tx->rfs)), |
| pi2s_tx->bitspersample, pi2s_tx->channels); |
| } else if (!strcmp(codectype, "max98095")) { |
| ret = max98095_init(blob, pi2s_tx->id + 1, |
| pi2s_tx->samplingrate, |
| (pi2s_tx->samplingrate * (pi2s_tx->rfs)), |
| pi2s_tx->bitspersample); |
| } else { |
| debug("%s: Unknown codec type %s\n", __func__, codectype); |
| return -1; |
| } |
| |
| if (ret) { |
| debug("%s: Codec init failed\n", __func__); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int sound_init(const void *blob) |
| { |
| int ret; |
| struct i2stx_info *pi2s_tx = &g_i2stx_pri; |
| |
| /* Get the I2S Values */ |
| if (get_sound_i2s_values(pi2s_tx, blob) < 0) { |
| debug(" FDT I2S values failed\n"); |
| return -1; |
| } |
| |
| if (codec_init(blob, pi2s_tx) < 0) { |
| debug(" Codec init failed\n"); |
| return -1; |
| } |
| |
| ret = i2s_tx_init(pi2s_tx); |
| if (ret) { |
| debug("%s: Failed to init i2c transmit: ret=%d\n", __func__, |
| ret); |
| return ret; |
| } |
| |
| |
| return ret; |
| } |
| |
| int sound_play(uint32_t msec, uint32_t frequency) |
| { |
| unsigned int *data; |
| unsigned long data_size; |
| unsigned int ret = 0; |
| |
| /*Buffer length computation */ |
| data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels; |
| data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE); |
| data = malloc(data_size); |
| |
| if (data == NULL) { |
| debug("%s: malloc failed\n", __func__); |
| return -1; |
| } |
| |
| sound_create_square_wave((unsigned short *)data, |
| data_size / sizeof(unsigned short), |
| frequency); |
| |
| while (msec >= 1000) { |
| ret = i2s_transfer_tx_data(&g_i2stx_pri, data, |
| (data_size / sizeof(int))); |
| msec -= 1000; |
| } |
| if (msec) { |
| unsigned long size = |
| (data_size * msec) / (sizeof(int) * 1000); |
| |
| ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size); |
| } |
| |
| free(data); |
| |
| return ret; |
| } |