| /* |
| * (C) Copyright 2009 SAMSUNG Electronics |
| * Minkyu Kang <mk7.kang@samsung.com> |
| * Jaehoon Chung <jh80.chung@samsung.com> |
| * Portions Copyright 2011-2016 NVIDIA Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <bouncebuf.h> |
| #include <common.h> |
| #include <dm/device.h> |
| #include <errno.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <asm/arch-tegra/tegra_mmc.h> |
| #include <mmc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct tegra_mmc_priv { |
| struct tegra_mmc *reg; |
| struct reset_ctl reset_ctl; |
| struct clk clk; |
| struct gpio_desc cd_gpio; /* Change Detect GPIO */ |
| struct gpio_desc pwr_gpio; /* Power GPIO */ |
| struct gpio_desc wp_gpio; /* Write Protect GPIO */ |
| unsigned int version; /* SDHCI spec. version */ |
| unsigned int clock; /* Current clock (MHz) */ |
| struct mmc_config cfg; /* mmc configuration */ |
| struct mmc *mmc; |
| }; |
| |
| static void tegra_mmc_set_power(struct tegra_mmc_priv *priv, |
| unsigned short power) |
| { |
| u8 pwr = 0; |
| debug("%s: power = %x\n", __func__, power); |
| |
| if (power != (unsigned short)-1) { |
| switch (1 << power) { |
| case MMC_VDD_165_195: |
| pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8; |
| break; |
| case MMC_VDD_29_30: |
| case MMC_VDD_30_31: |
| pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0; |
| break; |
| case MMC_VDD_32_33: |
| case MMC_VDD_33_34: |
| pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3; |
| break; |
| } |
| } |
| debug("%s: pwr = %X\n", __func__, pwr); |
| |
| /* Set the bus voltage first (if any) */ |
| writeb(pwr, &priv->reg->pwrcon); |
| if (pwr == 0) |
| return; |
| |
| /* Now enable bus power */ |
| pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER; |
| writeb(pwr, &priv->reg->pwrcon); |
| } |
| |
| static void tegra_mmc_prepare_data(struct tegra_mmc_priv *priv, |
| struct mmc_data *data, |
| struct bounce_buffer *bbstate) |
| { |
| unsigned char ctrl; |
| |
| |
| debug("buf: %p (%p), data->blocks: %u, data->blocksize: %u\n", |
| bbstate->bounce_buffer, bbstate->user_buffer, data->blocks, |
| data->blocksize); |
| |
| writel((u32)(unsigned long)bbstate->bounce_buffer, &priv->reg->sysad); |
| /* |
| * DMASEL[4:3] |
| * 00 = Selects SDMA |
| * 01 = Reserved |
| * 10 = Selects 32-bit Address ADMA2 |
| * 11 = Selects 64-bit Address ADMA2 |
| */ |
| ctrl = readb(&priv->reg->hostctl); |
| ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK; |
| ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA; |
| writeb(ctrl, &priv->reg->hostctl); |
| |
| /* We do not handle DMA boundaries, so set it to max (512 KiB) */ |
| writew((7 << 12) | (data->blocksize & 0xFFF), &priv->reg->blksize); |
| writew(data->blocks, &priv->reg->blkcnt); |
| } |
| |
| static void tegra_mmc_set_transfer_mode(struct tegra_mmc_priv *priv, |
| struct mmc_data *data) |
| { |
| unsigned short mode; |
| debug(" mmc_set_transfer_mode called\n"); |
| /* |
| * TRNMOD |
| * MUL1SIN0[5] : Multi/Single Block Select |
| * RD1WT0[4] : Data Transfer Direction Select |
| * 1 = read |
| * 0 = write |
| * ENACMD12[2] : Auto CMD12 Enable |
| * ENBLKCNT[1] : Block Count Enable |
| * ENDMA[0] : DMA Enable |
| */ |
| mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE | |
| TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE); |
| |
| if (data->blocks > 1) |
| mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT; |
| |
| if (data->flags & MMC_DATA_READ) |
| mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ; |
| |
| writew(mode, &priv->reg->trnmod); |
| } |
| |
| static int tegra_mmc_wait_inhibit(struct tegra_mmc_priv *priv, |
| struct mmc_cmd *cmd, |
| struct mmc_data *data, |
| unsigned int timeout) |
| { |
| /* |
| * PRNSTS |
| * CMDINHDAT[1] : Command Inhibit (DAT) |
| * CMDINHCMD[0] : Command Inhibit (CMD) |
| */ |
| unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD; |
| |
| /* |
| * We shouldn't wait for data inhibit for stop commands, even |
| * though they might use busy signaling |
| */ |
| if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY)) |
| mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT; |
| |
| while (readl(&priv->reg->prnsts) & mask) { |
| if (timeout == 0) { |
| printf("%s: timeout error\n", __func__); |
| return -1; |
| } |
| timeout--; |
| udelay(1000); |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, |
| struct mmc_data *data, |
| struct bounce_buffer *bbstate) |
| { |
| struct tegra_mmc_priv *priv = mmc->priv; |
| int flags, i; |
| int result; |
| unsigned int mask = 0; |
| unsigned int retry = 0x100000; |
| debug(" mmc_send_cmd called\n"); |
| |
| result = tegra_mmc_wait_inhibit(priv, cmd, data, 10 /* ms */); |
| |
| if (result < 0) |
| return result; |
| |
| if (data) |
| tegra_mmc_prepare_data(priv, data, bbstate); |
| |
| debug("cmd->arg: %08x\n", cmd->cmdarg); |
| writel(cmd->cmdarg, &priv->reg->argument); |
| |
| if (data) |
| tegra_mmc_set_transfer_mode(priv, data); |
| |
| if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) |
| return -1; |
| |
| /* |
| * CMDREG |
| * CMDIDX[13:8] : Command index |
| * DATAPRNT[5] : Data Present Select |
| * ENCMDIDX[4] : Command Index Check Enable |
| * ENCMDCRC[3] : Command CRC Check Enable |
| * RSPTYP[1:0] |
| * 00 = No Response |
| * 01 = Length 136 |
| * 10 = Length 48 |
| * 11 = Length 48 Check busy after response |
| */ |
| if (!(cmd->resp_type & MMC_RSP_PRESENT)) |
| flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE; |
| else if (cmd->resp_type & MMC_RSP_136) |
| flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136; |
| else if (cmd->resp_type & MMC_RSP_BUSY) |
| flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY; |
| else |
| flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48; |
| |
| if (cmd->resp_type & MMC_RSP_CRC) |
| flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK; |
| if (cmd->resp_type & MMC_RSP_OPCODE) |
| flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK; |
| if (data) |
| flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER; |
| |
| debug("cmd: %d\n", cmd->cmdidx); |
| |
| writew((cmd->cmdidx << 8) | flags, &priv->reg->cmdreg); |
| |
| for (i = 0; i < retry; i++) { |
| mask = readl(&priv->reg->norintsts); |
| /* Command Complete */ |
| if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) { |
| if (!data) |
| writel(mask, &priv->reg->norintsts); |
| break; |
| } |
| } |
| |
| if (i == retry) { |
| printf("%s: waiting for status update\n", __func__); |
| writel(mask, &priv->reg->norintsts); |
| return -ETIMEDOUT; |
| } |
| |
| if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) { |
| /* Timeout Error */ |
| debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx); |
| writel(mask, &priv->reg->norintsts); |
| return -ETIMEDOUT; |
| } else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) { |
| /* Error Interrupt */ |
| debug("error: %08x cmd %d\n", mask, cmd->cmdidx); |
| writel(mask, &priv->reg->norintsts); |
| return -1; |
| } |
| |
| if (cmd->resp_type & MMC_RSP_PRESENT) { |
| if (cmd->resp_type & MMC_RSP_136) { |
| /* CRC is stripped so we need to do some shifting. */ |
| for (i = 0; i < 4; i++) { |
| unsigned long offset = (unsigned long) |
| (&priv->reg->rspreg3 - i); |
| cmd->response[i] = readl(offset) << 8; |
| |
| if (i != 3) { |
| cmd->response[i] |= |
| readb(offset - 1); |
| } |
| debug("cmd->resp[%d]: %08x\n", |
| i, cmd->response[i]); |
| } |
| } else if (cmd->resp_type & MMC_RSP_BUSY) { |
| for (i = 0; i < retry; i++) { |
| /* PRNTDATA[23:20] : DAT[3:0] Line Signal */ |
| if (readl(&priv->reg->prnsts) |
| & (1 << 20)) /* DAT[0] */ |
| break; |
| } |
| |
| if (i == retry) { |
| printf("%s: card is still busy\n", __func__); |
| writel(mask, &priv->reg->norintsts); |
| return -ETIMEDOUT; |
| } |
| |
| cmd->response[0] = readl(&priv->reg->rspreg0); |
| debug("cmd->resp[0]: %08x\n", cmd->response[0]); |
| } else { |
| cmd->response[0] = readl(&priv->reg->rspreg0); |
| debug("cmd->resp[0]: %08x\n", cmd->response[0]); |
| } |
| } |
| |
| if (data) { |
| unsigned long start = get_timer(0); |
| |
| while (1) { |
| mask = readl(&priv->reg->norintsts); |
| |
| if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) { |
| /* Error Interrupt */ |
| writel(mask, &priv->reg->norintsts); |
| printf("%s: error during transfer: 0x%08x\n", |
| __func__, mask); |
| return -1; |
| } else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) { |
| /* |
| * DMA Interrupt, restart the transfer where |
| * it was interrupted. |
| */ |
| unsigned int address = readl(&priv->reg->sysad); |
| |
| debug("DMA end\n"); |
| writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT, |
| &priv->reg->norintsts); |
| writel(address, &priv->reg->sysad); |
| } else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) { |
| /* Transfer Complete */ |
| debug("r/w is done\n"); |
| break; |
| } else if (get_timer(start) > 8000UL) { |
| writel(mask, &priv->reg->norintsts); |
| printf("%s: MMC Timeout\n" |
| " Interrupt status 0x%08x\n" |
| " Interrupt status enable 0x%08x\n" |
| " Interrupt signal enable 0x%08x\n" |
| " Present status 0x%08x\n", |
| __func__, mask, |
| readl(&priv->reg->norintstsen), |
| readl(&priv->reg->norintsigen), |
| readl(&priv->reg->prnsts)); |
| return -1; |
| } |
| } |
| writel(mask, &priv->reg->norintsts); |
| } |
| |
| udelay(1000); |
| return 0; |
| } |
| |
| static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| void *buf; |
| unsigned int bbflags; |
| size_t len; |
| struct bounce_buffer bbstate; |
| int ret; |
| |
| if (data) { |
| if (data->flags & MMC_DATA_READ) { |
| buf = data->dest; |
| bbflags = GEN_BB_WRITE; |
| } else { |
| buf = (void *)data->src; |
| bbflags = GEN_BB_READ; |
| } |
| len = data->blocks * data->blocksize; |
| |
| bounce_buffer_start(&bbstate, buf, len, bbflags); |
| } |
| |
| ret = tegra_mmc_send_cmd_bounced(mmc, cmd, data, &bbstate); |
| |
| if (data) |
| bounce_buffer_stop(&bbstate); |
| |
| return ret; |
| } |
| |
| static void tegra_mmc_change_clock(struct tegra_mmc_priv *priv, uint clock) |
| { |
| ulong rate; |
| int div; |
| unsigned short clk; |
| unsigned long timeout; |
| |
| debug(" mmc_change_clock called\n"); |
| |
| /* |
| * Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0 |
| */ |
| if (clock == 0) |
| goto out; |
| |
| rate = clk_set_rate(&priv->clk, clock); |
| div = (rate + clock - 1) / clock; |
| debug("div = %d\n", div); |
| |
| writew(0, &priv->reg->clkcon); |
| |
| /* |
| * CLKCON |
| * SELFREQ[15:8] : base clock divided by value |
| * ENSDCLK[2] : SD Clock Enable |
| * STBLINTCLK[1] : Internal Clock Stable |
| * ENINTCLK[0] : Internal Clock Enable |
| */ |
| div >>= 1; |
| clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) | |
| TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE); |
| writew(clk, &priv->reg->clkcon); |
| |
| /* Wait max 10 ms */ |
| timeout = 10; |
| while (!(readw(&priv->reg->clkcon) & |
| TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) { |
| if (timeout == 0) { |
| printf("%s: timeout error\n", __func__); |
| return; |
| } |
| timeout--; |
| udelay(1000); |
| } |
| |
| clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE; |
| writew(clk, &priv->reg->clkcon); |
| |
| debug("mmc_change_clock: clkcon = %08X\n", clk); |
| |
| out: |
| priv->clock = clock; |
| } |
| |
| static void tegra_mmc_set_ios(struct mmc *mmc) |
| { |
| struct tegra_mmc_priv *priv = mmc->priv; |
| unsigned char ctrl; |
| debug(" mmc_set_ios called\n"); |
| |
| debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock); |
| |
| /* Change clock first */ |
| tegra_mmc_change_clock(priv, mmc->clock); |
| |
| ctrl = readb(&priv->reg->hostctl); |
| |
| /* |
| * WIDE8[5] |
| * 0 = Depend on WIDE4 |
| * 1 = 8-bit mode |
| * WIDE4[1] |
| * 1 = 4-bit mode |
| * 0 = 1-bit mode |
| */ |
| if (mmc->bus_width == 8) |
| ctrl |= (1 << 5); |
| else if (mmc->bus_width == 4) |
| ctrl |= (1 << 1); |
| else |
| ctrl &= ~(1 << 1); |
| |
| writeb(ctrl, &priv->reg->hostctl); |
| debug("mmc_set_ios: hostctl = %08X\n", ctrl); |
| } |
| |
| static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv) |
| { |
| #if defined(CONFIG_TEGRA30) |
| u32 val; |
| |
| debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)priv->reg); |
| |
| /* Set the pad drive strength for SDMMC1 or 3 only */ |
| if (priv->reg != (void *)0x78000000 && |
| priv->reg != (void *)0x78000400) { |
| debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", |
| __func__); |
| return; |
| } |
| |
| val = readl(&priv->reg->sdmemcmppadctl); |
| val &= 0xFFFFFFF0; |
| val |= MEMCOMP_PADCTRL_VREF; |
| writel(val, &priv->reg->sdmemcmppadctl); |
| |
| val = readl(&priv->reg->autocalcfg); |
| val &= 0xFFFF0000; |
| val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; |
| writel(val, &priv->reg->autocalcfg); |
| #endif |
| } |
| |
| static void tegra_mmc_reset(struct tegra_mmc_priv *priv, struct mmc *mmc) |
| { |
| unsigned int timeout; |
| debug(" mmc_reset called\n"); |
| |
| /* |
| * RSTALL[0] : Software reset for all |
| * 1 = reset |
| * 0 = work |
| */ |
| writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &priv->reg->swrst); |
| |
| priv->clock = 0; |
| |
| /* Wait max 100 ms */ |
| timeout = 100; |
| |
| /* hw clears the bit when it's done */ |
| while (readb(&priv->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) { |
| if (timeout == 0) { |
| printf("%s: timeout error\n", __func__); |
| return; |
| } |
| timeout--; |
| udelay(1000); |
| } |
| |
| /* Set SD bus voltage & enable bus power */ |
| tegra_mmc_set_power(priv, fls(mmc->cfg->voltages) - 1); |
| debug("%s: power control = %02X, host control = %02X\n", __func__, |
| readb(&priv->reg->pwrcon), readb(&priv->reg->hostctl)); |
| |
| /* Make sure SDIO pads are set up */ |
| tegra_mmc_pad_init(priv); |
| } |
| |
| static int tegra_mmc_init(struct mmc *mmc) |
| { |
| struct tegra_mmc_priv *priv = mmc->priv; |
| unsigned int mask; |
| debug(" tegra_mmc_init called\n"); |
| |
| tegra_mmc_reset(priv, mmc); |
| |
| priv->version = readw(&priv->reg->hcver); |
| debug("host version = %x\n", priv->version); |
| |
| /* mask all */ |
| writel(0xffffffff, &priv->reg->norintstsen); |
| writel(0xffffffff, &priv->reg->norintsigen); |
| |
| writeb(0xe, &priv->reg->timeoutcon); /* TMCLK * 2^27 */ |
| /* |
| * NORMAL Interrupt Status Enable Register init |
| * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable |
| * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable |
| * [3] ENSTADMAINT : DMA boundary interrupt |
| * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable |
| * [0] ENSTACMDCMPLT : Command Complete Status Enable |
| */ |
| mask = readl(&priv->reg->norintstsen); |
| mask &= ~(0xffff); |
| mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE | |
| TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE | |
| TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT | |
| TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY | |
| TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY); |
| writel(mask, &priv->reg->norintstsen); |
| |
| /* |
| * NORMAL Interrupt Signal Enable Register init |
| * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable |
| */ |
| mask = readl(&priv->reg->norintsigen); |
| mask &= ~(0xffff); |
| mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE; |
| writel(mask, &priv->reg->norintsigen); |
| |
| return 0; |
| } |
| |
| static int tegra_mmc_getcd(struct mmc *mmc) |
| { |
| struct tegra_mmc_priv *priv = mmc->priv; |
| |
| debug("tegra_mmc_getcd called\n"); |
| |
| if (dm_gpio_is_valid(&priv->cd_gpio)) |
| return dm_gpio_get_value(&priv->cd_gpio); |
| |
| return 1; |
| } |
| |
| static const struct mmc_ops tegra_mmc_ops = { |
| .send_cmd = tegra_mmc_send_cmd, |
| .set_ios = tegra_mmc_set_ios, |
| .init = tegra_mmc_init, |
| .getcd = tegra_mmc_getcd, |
| }; |
| |
| static int tegra_mmc_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct tegra_mmc_priv *priv = dev_get_priv(dev); |
| int bus_width, ret; |
| |
| priv->cfg.name = "Tegra SD/MMC"; |
| priv->cfg.ops = &tegra_mmc_ops; |
| |
| bus_width = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "bus-width", |
| 1); |
| |
| priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; |
| priv->cfg.host_caps = 0; |
| if (bus_width == 8) |
| priv->cfg.host_caps |= MMC_MODE_8BIT; |
| if (bus_width >= 4) |
| priv->cfg.host_caps |= MMC_MODE_4BIT; |
| priv->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| |
| /* |
| * min freq is for card identification, and is the highest |
| * low-speed SDIO card frequency (actually 400KHz) |
| * max freq is highest HS eMMC clock as per the SD/MMC spec |
| * (actually 52MHz) |
| */ |
| priv->cfg.f_min = 375000; |
| priv->cfg.f_max = 48000000; |
| |
| priv->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; |
| |
| priv->reg = (void *)dev_get_addr(dev); |
| |
| ret = reset_get_by_name(dev, "sdhci", &priv->reset_ctl); |
| if (ret) { |
| debug("reset_get_by_name() failed: %d\n", ret); |
| return ret; |
| } |
| ret = clk_get_by_index(dev, 0, &priv->clk); |
| if (ret) { |
| debug("clk_get_by_index() failed: %d\n", ret); |
| return ret; |
| } |
| |
| ret = reset_assert(&priv->reset_ctl); |
| if (ret) |
| return ret; |
| ret = clk_enable(&priv->clk); |
| if (ret) |
| return ret; |
| ret = clk_set_rate(&priv->clk, 20000000); |
| if (IS_ERR_VALUE(ret)) |
| return ret; |
| ret = reset_deassert(&priv->reset_ctl); |
| if (ret) |
| return ret; |
| |
| /* These GPIOs are optional */ |
| gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, |
| GPIOD_IS_IN); |
| gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, |
| GPIOD_IS_IN); |
| gpio_request_by_name(dev, "power-gpios", 0, |
| &priv->pwr_gpio, GPIOD_IS_OUT); |
| if (dm_gpio_is_valid(&priv->pwr_gpio)) |
| dm_gpio_set_value(&priv->pwr_gpio, 1); |
| |
| priv->mmc = mmc_create(&priv->cfg, priv); |
| if (priv->mmc == NULL) |
| return -1; |
| |
| priv->mmc->dev = dev; |
| upriv->mmc = priv->mmc; |
| |
| return 0; |
| } |
| |
| static const struct udevice_id tegra_mmc_ids[] = { |
| { .compatible = "nvidia,tegra20-sdhci" }, |
| { .compatible = "nvidia,tegra30-sdhci" }, |
| { .compatible = "nvidia,tegra114-sdhci" }, |
| { .compatible = "nvidia,tegra124-sdhci" }, |
| { .compatible = "nvidia,tegra210-sdhci" }, |
| { .compatible = "nvidia,tegra186-sdhci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(tegra_mmc_drv) = { |
| .name = "tegra_mmc", |
| .id = UCLASS_MMC, |
| .of_match = tegra_mmc_ids, |
| .probe = tegra_mmc_probe, |
| .priv_auto_alloc_size = sizeof(struct tegra_mmc_priv), |
| }; |