| /* |
| * Copyright (C) 2015 Atmel Corporation |
| * Wenyou.Yang <wenyou.yang@atmel.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <malloc.h> |
| #include <sdhci.h> |
| #include <asm/arch/clk.h> |
| |
| #define ATMEL_SDHC_MIN_FREQ 400000 |
| |
| #ifndef CONFIG_DM_MMC |
| int atmel_sdhci_init(void *regbase, u32 id) |
| { |
| struct sdhci_host *host; |
| u32 max_clk, min_clk = ATMEL_SDHC_MIN_FREQ; |
| |
| host = (struct sdhci_host *)calloc(1, sizeof(struct sdhci_host)); |
| if (!host) { |
| printf("%s: sdhci_host calloc failed\n", __func__); |
| return -ENOMEM; |
| } |
| |
| host->name = "atmel_sdhci"; |
| host->ioaddr = regbase; |
| host->quirks = 0; |
| max_clk = at91_get_periph_generated_clk(id); |
| if (!max_clk) { |
| printf("%s: Failed to get the proper clock\n", __func__); |
| free(host); |
| return -ENODEV; |
| } |
| |
| add_sdhci(host, max_clk, min_clk); |
| |
| return 0; |
| } |
| |
| #else |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct atmel_sdhci_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| static int atmel_sdhci_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct atmel_sdhci_plat *plat = dev_get_platdata(dev); |
| struct sdhci_host *host = dev_get_priv(dev); |
| u32 max_clk; |
| u32 caps, caps_1; |
| u32 clk_base, clk_mul; |
| ulong gck_rate; |
| struct clk clk; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| if (ret) |
| return ret; |
| |
| host->name = dev->name; |
| host->ioaddr = (void *)dev_get_addr(dev); |
| |
| host->quirks = 0; |
| host->bus_width = fdtdec_get_int(gd->fdt_blob, dev->of_offset, |
| "bus-width", 4); |
| |
| caps = sdhci_readl(host, SDHCI_CAPABILITIES); |
| clk_base = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; |
| caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); |
| clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; |
| gck_rate = clk_base * 1000000 * (clk_mul + 1); |
| |
| ret = clk_get_by_index(dev, 1, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_set_rate(&clk, gck_rate); |
| if (ret) |
| return ret; |
| |
| max_clk = clk_get_rate(&clk); |
| if (!max_clk) |
| return -EINVAL; |
| |
| ret = sdhci_setup_cfg(&plat->cfg, host, max_clk, ATMEL_SDHC_MIN_FREQ); |
| if (ret) |
| return ret; |
| |
| host->mmc = &plat->mmc; |
| host->mmc->dev = dev; |
| host->mmc->priv = host; |
| upriv->mmc = host->mmc; |
| |
| clk_free(&clk); |
| |
| return sdhci_probe(dev); |
| } |
| |
| static int atmel_sdhci_bind(struct udevice *dev) |
| { |
| struct atmel_sdhci_plat *plat = dev_get_platdata(dev); |
| |
| return sdhci_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static const struct udevice_id atmel_sdhci_ids[] = { |
| { .compatible = "atmel,sama5d2-sdhci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(atmel_sdhci_drv) = { |
| .name = "atmel_sdhci", |
| .id = UCLASS_MMC, |
| .of_match = atmel_sdhci_ids, |
| .ops = &sdhci_ops, |
| .bind = atmel_sdhci_bind, |
| .probe = atmel_sdhci_probe, |
| .priv_auto_alloc_size = sizeof(struct sdhci_host), |
| .platdata_auto_alloc_size = sizeof(struct atmel_sdhci_plat), |
| }; |
| #endif |