am335x_evm: Add support for the NOR module on the memory cape
This patch adds support for the NOR module that attaches
to the memory cape for a Beaglebone board. This does not
add booting support; only support so that you can boot from
SD/MMC and see the NOR module so that it can be programmed.
Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
[trini: Clean up config changes slightly]
Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 00802b6..b12341d 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -19,6 +19,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
@@ -339,10 +340,22 @@
*/
int board_init(void)
{
+#ifdef CONFIG_NOR
+ const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
+ STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4,
+ STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 };
+#endif
+
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
gpmc_init();
+#ifdef CONFIG_NOR
+ /* Reconfigure CS0 for NOR instead of NAND. */
+ enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0],
+ CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M);
+#endif
+
return 0;
}