| /* |
| * (C) Copyright 2010 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/tegra.h> |
| #include <asm/arch/display.h> |
| #include <asm/arch/dc.h> |
| #include <asm/arch-tegra/clk_rst.h> |
| #include <asm/arch-tegra/timer.h> |
| |
| static struct fdt_disp_config config; |
| |
| static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win) |
| { |
| unsigned h_dda, v_dda; |
| unsigned long val; |
| |
| val = readl(&dc->cmd.disp_win_header); |
| val |= WINDOW_A_SELECT; |
| writel(val, &dc->cmd.disp_win_header); |
| |
| writel(win->fmt, &dc->win.color_depth); |
| |
| clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK, |
| BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT); |
| |
| val = win->out_x << H_POSITION_SHIFT; |
| val |= win->out_y << V_POSITION_SHIFT; |
| writel(val, &dc->win.pos); |
| |
| val = win->out_w << H_SIZE_SHIFT; |
| val |= win->out_h << V_SIZE_SHIFT; |
| writel(val, &dc->win.size); |
| |
| val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT; |
| val |= win->h << V_PRESCALED_SIZE_SHIFT; |
| writel(val, &dc->win.prescaled_size); |
| |
| writel(0, &dc->win.h_initial_dda); |
| writel(0, &dc->win.v_initial_dda); |
| |
| h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1); |
| v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1); |
| |
| val = h_dda << H_DDA_INC_SHIFT; |
| val |= v_dda << V_DDA_INC_SHIFT; |
| writel(val, &dc->win.dda_increment); |
| |
| writel(win->stride, &dc->win.line_stride); |
| writel(0, &dc->win.buf_stride); |
| |
| val = WIN_ENABLE; |
| if (win->bpp < 24) |
| val |= COLOR_EXPAND; |
| writel(val, &dc->win.win_opt); |
| |
| writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr); |
| writel(win->x, &dc->winbuf.addr_h_offset); |
| writel(win->y, &dc->winbuf.addr_v_offset); |
| |
| writel(0xff00, &dc->win.blend_nokey); |
| writel(0xff00, &dc->win.blend_1win); |
| |
| val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; |
| val |= GENERAL_UPDATE | WIN_A_UPDATE; |
| writel(val, &dc->cmd.state_ctrl); |
| } |
| |
| static void write_pair(struct fdt_disp_config *config, int item, u32 *reg) |
| { |
| writel(config->horiz_timing[item] | |
| (config->vert_timing[item] << 16), reg); |
| } |
| |
| static int update_display_mode(struct dc_disp_reg *disp, |
| struct fdt_disp_config *config) |
| { |
| unsigned long val; |
| unsigned long rate; |
| unsigned long div; |
| |
| writel(0x0, &disp->disp_timing_opt); |
| write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync); |
| write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width); |
| write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch); |
| write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch); |
| |
| writel(config->width | (config->height << 16), &disp->disp_active); |
| |
| val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT; |
| val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT; |
| writel(val, &disp->data_enable_opt); |
| |
| val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT; |
| val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT; |
| val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT; |
| writel(val, &disp->disp_interface_ctrl); |
| |
| /* |
| * The pixel clock divider is in 7.1 format (where the bottom bit |
| * represents 0.5). Here we calculate the divider needed to get from |
| * the display clock (typically 600MHz) to the pixel clock. We round |
| * up or down as requried. |
| */ |
| rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL); |
| div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2; |
| debug("Display clock %lu, divider %lu\n", rate, div); |
| |
| writel(0x00010001, &disp->shift_clk_opt); |
| |
| val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; |
| val |= div << SHIFT_CLK_DIVIDER_SHIFT; |
| writel(val, &disp->disp_clk_ctrl); |
| |
| return 0; |
| } |
| |
| /* Start up the display and turn on power to PWMs */ |
| static void basic_init(struct dc_cmd_reg *cmd) |
| { |
| u32 val; |
| |
| writel(0x00000100, &cmd->gen_incr_syncpt_ctrl); |
| writel(0x0000011a, &cmd->cont_syncpt_vsync); |
| writel(0x00000000, &cmd->int_type); |
| writel(0x00000000, &cmd->int_polarity); |
| writel(0x00000000, &cmd->int_mask); |
| writel(0x00000000, &cmd->int_enb); |
| |
| val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE; |
| val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE; |
| val |= PM1_ENABLE; |
| writel(val, &cmd->disp_pow_ctrl); |
| |
| val = readl(&cmd->disp_cmd); |
| val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT; |
| writel(val, &cmd->disp_cmd); |
| } |
| |
| static void basic_init_timer(struct dc_disp_reg *disp) |
| { |
| writel(0x00000020, &disp->mem_high_pri); |
| writel(0x00000001, &disp->mem_high_pri_timer); |
| } |
| |
| static const u32 rgb_enb_tab[PIN_REG_COUNT] = { |
| 0x00000000, |
| 0x00000000, |
| 0x00000000, |
| 0x00000000, |
| }; |
| |
| static const u32 rgb_polarity_tab[PIN_REG_COUNT] = { |
| 0x00000000, |
| 0x01000000, |
| 0x00000000, |
| 0x00000000, |
| }; |
| |
| static const u32 rgb_data_tab[PIN_REG_COUNT] = { |
| 0x00000000, |
| 0x00000000, |
| 0x00000000, |
| 0x00000000, |
| }; |
| |
| static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = { |
| 0x00000000, |
| 0x00000000, |
| 0x00000000, |
| 0x00000000, |
| 0x00210222, |
| 0x00002200, |
| 0x00020000, |
| }; |
| |
| static void rgb_enable(struct dc_com_reg *com) |
| { |
| int i; |
| |
| for (i = 0; i < PIN_REG_COUNT; i++) { |
| writel(rgb_enb_tab[i], &com->pin_output_enb[i]); |
| writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]); |
| writel(rgb_data_tab[i], &com->pin_output_data[i]); |
| } |
| |
| for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++) |
| writel(rgb_sel_tab[i], &com->pin_output_sel[i]); |
| } |
| |
| static int setup_window(struct disp_ctl_win *win, |
| struct fdt_disp_config *config) |
| { |
| win->x = 0; |
| win->y = 0; |
| win->w = config->width; |
| win->h = config->height; |
| win->out_x = 0; |
| win->out_y = 0; |
| win->out_w = config->width; |
| win->out_h = config->height; |
| win->phys_addr = config->frame_buffer; |
| win->stride = config->width * (1 << config->log2_bpp) / 8; |
| debug("%s: depth = %d\n", __func__, config->log2_bpp); |
| switch (config->log2_bpp) { |
| case 5: |
| case 24: |
| win->fmt = COLOR_DEPTH_R8G8B8A8; |
| win->bpp = 32; |
| break; |
| case 4: |
| win->fmt = COLOR_DEPTH_B5G6R5; |
| win->bpp = 16; |
| break; |
| |
| default: |
| debug("Unsupported LCD bit depth"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| struct fdt_disp_config *tegra_display_get_config(void) |
| { |
| return config.valid ? &config : NULL; |
| } |
| |
| static void debug_timing(const char *name, unsigned int timing[]) |
| { |
| #ifdef DEBUG |
| int i; |
| |
| debug("%s timing: ", name); |
| for (i = 0; i < FDT_LCD_TIMING_COUNT; i++) |
| debug("%d ", timing[i]); |
| debug("\n"); |
| #endif |
| } |
| |
| /** |
| * Decode panel information from the fdt, according to a standard binding |
| * |
| * @param blob fdt blob |
| * @param node offset of fdt node to read from |
| * @param config structure to store fdt config into |
| * @return 0 if ok, -ve on error |
| */ |
| static int tegra_decode_panel(const void *blob, int node, |
| struct fdt_disp_config *config) |
| { |
| int front, back, ref; |
| |
| config->width = fdtdec_get_int(blob, node, "xres", -1); |
| config->height = fdtdec_get_int(blob, node, "yres", -1); |
| config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0); |
| if (!config->pixel_clock || config->width == -1 || |
| config->height == -1) { |
| debug("%s: Pixel parameters missing\n", __func__); |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| back = fdtdec_get_int(blob, node, "left-margin", -1); |
| front = fdtdec_get_int(blob, node, "right-margin", -1); |
| ref = fdtdec_get_int(blob, node, "hsync-len", -1); |
| if ((back | front | ref) == -1) { |
| debug("%s: Horizontal parameters missing\n", __func__); |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| /* Use a ref-to-sync of 1 always, and take this from the front porch */ |
| config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; |
| config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; |
| config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back; |
| config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - |
| config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC]; |
| debug_timing("horiz", config->horiz_timing); |
| |
| back = fdtdec_get_int(blob, node, "upper-margin", -1); |
| front = fdtdec_get_int(blob, node, "lower-margin", -1); |
| ref = fdtdec_get_int(blob, node, "vsync-len", -1); |
| if ((back | front | ref) == -1) { |
| debug("%s: Vertical parameters missing\n", __func__); |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; |
| config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; |
| config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back; |
| config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - |
| config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC]; |
| debug_timing("vert", config->vert_timing); |
| |
| return 0; |
| } |
| |
| /** |
| * Decode the display controller information from the fdt. |
| * |
| * @param blob fdt blob |
| * @param config structure to store fdt config into |
| * @return 0 if ok, -ve on error |
| */ |
| static int tegra_display_decode_config(const void *blob, |
| struct fdt_disp_config *config) |
| { |
| int node, rgb; |
| int bpp, bit; |
| |
| /* TODO: Support multiple controllers */ |
| node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC); |
| if (node < 0) { |
| debug("%s: Cannot find display controller node in fdt\n", |
| __func__); |
| return node; |
| } |
| config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg"); |
| if (!config->disp) { |
| debug("%s: No display controller address\n", __func__); |
| return -1; |
| } |
| |
| rgb = fdt_subnode_offset(blob, node, "rgb"); |
| |
| config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel"); |
| if (config->panel_node < 0) { |
| debug("%s: Cannot find panel information\n", __func__); |
| return -1; |
| } |
| |
| if (tegra_decode_panel(blob, config->panel_node, config)) { |
| debug("%s: Failed to decode panel information\n", __func__); |
| return -1; |
| } |
| |
| bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel", |
| -1); |
| bit = ffs(bpp) - 1; |
| if (bpp == (1 << bit)) |
| config->log2_bpp = bit; |
| else |
| config->log2_bpp = bpp; |
| if (bpp == -1) { |
| debug("%s: Pixel bpp parameters missing\n", __func__); |
| return -FDT_ERR_NOTFOUND; |
| } |
| config->bpp = bpp; |
| |
| config->valid = 1; /* we have a valid configuration */ |
| |
| return 0; |
| } |
| |
| int tegra_display_probe(const void *blob, void *default_lcd_base) |
| { |
| struct disp_ctl_win window; |
| struct dc_ctlr *dc; |
| |
| if (tegra_display_decode_config(blob, &config)) |
| return -1; |
| |
| config.frame_buffer = (u32)default_lcd_base; |
| |
| dc = (struct dc_ctlr *)config.disp; |
| |
| /* |
| * A header file for clock constants was NAKed upstream. |
| * TODO: Put this into the FDT and fdt_lcd struct when we have clock |
| * support there |
| */ |
| clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, |
| 144 * 1000000); |
| clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL, |
| 600 * 1000000); |
| basic_init(&dc->cmd); |
| basic_init_timer(&dc->disp); |
| rgb_enable(&dc->com); |
| |
| if (config.pixel_clock) |
| update_display_mode(&dc->disp, &config); |
| |
| if (setup_window(&window, &config)) |
| return -1; |
| |
| update_window(dc, &window); |
| |
| return 0; |
| } |