| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * board/renesas/salvator-x/salvator-x.c |
| * This file is Salvator-X/Salvator-XS board support. |
| * |
| * Copyright (C) 2015-2017 Renesas Electronics Corporation |
| * Copyright (C) 2015 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <image.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <netdev.h> |
| #include <dm.h> |
| #include <asm/global_data.h> |
| #include <dm/platform_data/serial_sh.h> |
| #include <asm/processor.h> |
| #include <asm/mach-types.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/rmobile.h> |
| #include <asm/arch/rcar-mstp.h> |
| #include <asm/arch/sh_sdhi.h> |
| #include <i2c.h> |
| #include <mmc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define DVFS_MSTP926 BIT(26) |
| #define HSUSB_MSTP704 BIT(4) /* HSUSB */ |
| |
| int board_early_init_f(void) |
| { |
| #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH) |
| /* DVFS for reset */ |
| mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926); |
| #endif |
| return 0; |
| } |
| |
| /* HSUSB block registers */ |
| #define HSUSB_REG_LPSTS 0xE6590102 |
| #define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14) |
| #define HSUSB_REG_UGCTRL2 0xE6590184 |
| #define HSUSB_REG_UGCTRL2_USB0SEL 0x30 |
| #define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10 |
| |
| int board_init(void) |
| { |
| /* USB1 pull-up */ |
| setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); |
| |
| /* Configure the HSUSB block */ |
| mstp_clrbits_le32(SMSTPCR7, SMSTPCR7, HSUSB_MSTP704); |
| /* Choice USB0SEL */ |
| clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL, |
| HSUSB_REG_UGCTRL2_USB0SEL_EHCI); |
| /* low power status */ |
| setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL); |
| |
| return 0; |
| } |
| |
| #define RST_BASE 0xE6160000 |
| #define RST_CA57RESCNT (RST_BASE + 0x40) |
| #define RST_CA53RESCNT (RST_BASE + 0x44) |
| #define RST_RSTOUTCR (RST_BASE + 0x58) |
| #define RST_CODE 0xA5A5000F |
| |
| void reset_cpu(void) |
| { |
| #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH) |
| i2c_reg_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x20, 0x80); |
| #else |
| /* only CA57 ? */ |
| writel(RST_CODE, RST_CA57RESCNT); |
| #endif |
| } |
| |
| #ifdef CONFIG_MULTI_DTB_FIT |
| int board_fit_config_name_match(const char *name) |
| { |
| /* PRR driver is not available yet */ |
| u32 cpu_type = rmobile_get_cpu_type(); |
| |
| if ((cpu_type == RMOBILE_CPU_TYPE_R8A7795) && |
| !strcmp(name, "r8a77950-salvator-x-u-boot")) |
| return 0; |
| |
| if ((cpu_type == RMOBILE_CPU_TYPE_R8A7796) && |
| !strcmp(name, "r8a77960-salvator-x-u-boot")) |
| return 0; |
| |
| if ((cpu_type == RMOBILE_CPU_TYPE_R8A77965) && |
| !strcmp(name, "r8a77965-salvator-x-u-boot")) |
| return 0; |
| |
| return -1; |
| } |
| #endif |