| /* |
| * (C) Copyright 2003-2004 |
| * Gary Jennejohn, DENX Software Engineering, gj@denx.de. |
| * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #include <command.h> |
| #include <image.h> |
| #include <asm/byteorder.h> |
| #if defined(CONFIG_NAND_LEGACY) |
| #include <linux/mtd/nand_legacy.h> |
| #endif |
| #include <fat.h> |
| #include <part.h> |
| |
| #include "auto_update.h" |
| |
| #ifdef CONFIG_AUTO_UPDATE |
| |
| #if !defined(CONFIG_CMD_FAT) |
| #error "must define CONFIG_CMD_FAT" |
| #endif |
| |
| extern au_image_t au_image[]; |
| extern int N_AU_IMAGES; |
| |
| /* where to load files into memory */ |
| #define LOAD_ADDR ((unsigned char *)0x100000) |
| #define MAX_LOADSZ 0x1c00000 |
| |
| /* externals */ |
| extern int fat_register_device(block_dev_desc_t *, int); |
| extern int file_fat_detectfs(void); |
| extern long file_fat_read(const char *, void *, unsigned long); |
| long do_fat_read (const char *filename, void *buffer, |
| unsigned long maxsize, int dols); |
| extern int flash_sect_erase(ulong, ulong); |
| extern int flash_sect_protect (int, ulong, ulong); |
| extern int flash_write (char *, ulong, ulong); |
| |
| #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) |
| /* references to names in cmd_nand.c */ |
| #define NANDRW_READ 0x01 |
| #define NANDRW_WRITE 0x00 |
| #define NANDRW_JFFS2 0x02 |
| #define NANDRW_JFFS2_SKIP 0x04 |
| extern struct nand_chip nand_dev_desc[]; |
| extern int nand_legacy_rw(struct nand_chip* nand, int cmd, |
| size_t start, size_t len, |
| size_t * retlen, u_char * buf); |
| extern int nand_legacy_erase(struct nand_chip* nand, size_t ofs, |
| size_t len, int clean); |
| #endif |
| |
| extern block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE]; |
| |
| int au_check_cksum_valid(int i, long nbytes) |
| { |
| image_header_t *hdr; |
| |
| hdr = (image_header_t *)LOAD_ADDR; |
| #if defined(CONFIG_FIT) |
| if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { |
| puts ("Non legacy image format not supported\n"); |
| return -1; |
| } |
| #endif |
| |
| if ((au_image[i].type == AU_FIRMWARE) && |
| (au_image[i].size != image_get_data_size (hdr))) { |
| printf ("Image %s has wrong size\n", au_image[i].name); |
| return -1; |
| } |
| |
| if (nbytes != (image_get_image_size (hdr))) { |
| printf ("Image %s bad total SIZE\n", au_image[i].name); |
| return -1; |
| } |
| |
| /* check the data CRC */ |
| if (!image_check_dcrc (hdr)) { |
| printf ("Image %s bad data checksum\n", au_image[i].name); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int au_check_header_valid(int i, long nbytes) |
| { |
| image_header_t *hdr; |
| unsigned long checksum; |
| |
| hdr = (image_header_t *)LOAD_ADDR; |
| #if defined(CONFIG_FIT) |
| if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { |
| puts ("Non legacy image format not supported\n"); |
| return -1; |
| } |
| #endif |
| |
| /* check the easy ones first */ |
| if (nbytes < image_get_header_size ()) { |
| printf ("Image %s bad header SIZE\n", au_image[i].name); |
| return -1; |
| } |
| if (!image_check_magic (hdr) || !image_check_arch (hdr, IH_ARCH_PPC)) { |
| printf ("Image %s bad MAGIC or ARCH\n", au_image[i].name); |
| return -1; |
| } |
| if (!image_check_hcrc (hdr)) { |
| printf ("Image %s bad header checksum\n", au_image[i].name); |
| return -1; |
| } |
| |
| /* check the type - could do this all in one gigantic if() */ |
| if (((au_image[i].type & AU_TYPEMASK) == AU_FIRMWARE) && |
| !image_check_type (hdr, IH_TYPE_FIRMWARE)) { |
| printf ("Image %s wrong type\n", au_image[i].name); |
| return -1; |
| } |
| if (((au_image[i].type & AU_TYPEMASK) == AU_SCRIPT) && |
| !image_check_type (hdr, IH_TYPE_SCRIPT)) { |
| printf ("Image %s wrong type\n", au_image[i].name); |
| return -1; |
| } |
| |
| /* recycle checksum */ |
| checksum = image_get_data_size (hdr); |
| |
| return 0; |
| } |
| |
| int au_do_update(int i, long sz) |
| { |
| image_header_t *hdr; |
| char *addr; |
| long start, end; |
| int off, rc; |
| uint nbytes; |
| int k; |
| #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) |
| int total; |
| #endif |
| |
| hdr = (image_header_t *)LOAD_ADDR; |
| #if defined(CONFIG_FIT) |
| if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { |
| puts ("Non legacy image format not supported\n"); |
| return -1; |
| } |
| #endif |
| |
| switch (au_image[i].type & AU_TYPEMASK) { |
| case AU_SCRIPT: |
| printf("Executing script %s\n", au_image[i].name); |
| |
| /* execute a script */ |
| if (image_check_type (hdr, IH_TYPE_SCRIPT)) { |
| addr = (char *)((char *)hdr + image_get_header_size ()); |
| /* stick a NULL at the end of the script, otherwise */ |
| /* parse_string_outer() runs off the end. */ |
| addr[image_get_data_size (hdr)] = 0; |
| addr += 8; |
| |
| /* |
| * Replace cr/lf with ; |
| */ |
| k = 0; |
| while (addr[k] != 0) { |
| if ((addr[k] == 10) || (addr[k] == 13)) { |
| addr[k] = ';'; |
| } |
| k++; |
| } |
| |
| run_command(addr, 0); |
| return 0; |
| } |
| |
| break; |
| |
| case AU_FIRMWARE: |
| case AU_NOR: |
| case AU_NAND: |
| start = au_image[i].start; |
| end = au_image[i].start + au_image[i].size - 1; |
| |
| /* |
| * do not update firmware when image is already in flash. |
| */ |
| if (au_image[i].type == AU_FIRMWARE) { |
| char *orig = (char*)start; |
| char *new = (char *)((char *)hdr + |
| image_get_header_size ()); |
| nbytes = image_get_data_size (hdr); |
| |
| while (--nbytes) { |
| if (*orig++ != *new++) { |
| break; |
| } |
| } |
| if (!nbytes) { |
| printf ("Skipping firmware update - " |
| "images are identical\n"); |
| break; |
| } |
| } |
| |
| /* unprotect the address range */ |
| if (((au_image[i].type & AU_FLAGMASK) == AU_PROTECT) || |
| (au_image[i].type == AU_FIRMWARE)) { |
| flash_sect_protect (0, start, end); |
| } |
| |
| /* |
| * erase the address range. |
| */ |
| if (au_image[i].type != AU_NAND) { |
| printf ("Updating NOR FLASH with image %s\n", |
| au_image[i].name); |
| debug ("flash_sect_erase(%lx, %lx);\n", start, end); |
| flash_sect_erase (start, end); |
| } else { |
| #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) |
| printf ("Updating NAND FLASH with image %s\n", |
| au_image[i].name); |
| debug ("nand_legacy_erase(%lx, %lx);\n", start, end); |
| rc = nand_legacy_erase (nand_dev_desc, start, |
| end - start + 1, 0); |
| debug ("nand_legacy_erase returned %x\n", rc); |
| #endif |
| } |
| |
| udelay(10000); |
| |
| /* strip the header - except for the kernel and ramdisk */ |
| if (au_image[i].type != AU_FIRMWARE) { |
| addr = (char *)hdr; |
| off = image_get_header_size (); |
| nbytes = image_get_image_size (hdr); |
| } else { |
| addr = (char *)((char *)hdr + image_get_header_size ()); |
| off = 0; |
| nbytes = image_get_data_size (hdr); |
| } |
| |
| /* |
| * copy the data from RAM to FLASH |
| */ |
| if (au_image[i].type != AU_NAND) { |
| debug ("flash_write(%p, %lx, %x)\n", |
| addr, start, nbytes); |
| rc = flash_write ((char *)addr, start, |
| (nbytes + 1) & ~1); |
| } else { |
| #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) |
| debug ("nand_legacy_rw(%p, %lx, %x)\n", |
| addr, start, nbytes); |
| rc = nand_legacy_rw (nand_dev_desc, |
| NANDRW_WRITE | NANDRW_JFFS2, |
| start, nbytes, (size_t *)&total, |
| (uchar *)addr); |
| debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", |
| rc, total, nbytes); |
| #else |
| rc = -1; |
| #endif |
| } |
| if (rc != 0) { |
| printf ("Flashing failed due to error %d\n", rc); |
| return -1; |
| } |
| |
| /* |
| * check the dcrc of the copy |
| */ |
| if (au_image[i].type != AU_NAND) { |
| rc = crc32 (0, (uchar *)(start + off), |
| image_get_data_size (hdr)); |
| } else { |
| #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) |
| rc = nand_legacy_rw (nand_dev_desc, |
| NANDRW_READ | NANDRW_JFFS2 | |
| NANDRW_JFFS2_SKIP, |
| start, nbytes, (size_t *)&total, |
| (uchar *)addr); |
| rc = crc32 (0, (uchar *)(addr + off), |
| image_get_data_size (hdr)); |
| #endif |
| } |
| if (rc != image_get_dcrc (hdr)) { |
| printf ("Image %s Bad Data Checksum After COPY\n", |
| au_image[i].name); |
| return -1; |
| } |
| |
| /* protect the address range */ |
| /* this assumes that ONLY the firmware is protected! */ |
| if (((au_image[i].type & AU_FLAGMASK) == AU_PROTECT) || |
| (au_image[i].type == AU_FIRMWARE)) { |
| flash_sect_protect (1, start, end); |
| } |
| |
| break; |
| |
| default: |
| printf("Wrong image type selected!\n"); |
| } |
| |
| return 0; |
| } |
| |
| static void process_macros (const char *input, char *output) |
| { |
| char c, prev; |
| const char *varname_start = NULL; |
| int inputcnt = strlen (input); |
| int outputcnt = CFG_CBSIZE; |
| int state = 0; /* 0 = waiting for '$' */ |
| /* 1 = waiting for '(' or '{' */ |
| /* 2 = waiting for ')' or '}' */ |
| /* 3 = waiting for ''' */ |
| #ifdef DEBUG_PARSER |
| char *output_start = output; |
| |
| printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", |
| strlen(input), input); |
| #endif |
| |
| prev = '\0'; /* previous character */ |
| |
| while (inputcnt && outputcnt) { |
| c = *input++; |
| inputcnt--; |
| |
| if (state != 3) { |
| /* remove one level of escape characters */ |
| if ((c == '\\') && (prev != '\\')) { |
| if (inputcnt-- == 0) |
| break; |
| prev = c; |
| c = *input++; |
| } |
| } |
| |
| switch (state) { |
| case 0: /* Waiting for (unescaped) $ */ |
| if ((c == '\'') && (prev != '\\')) { |
| state = 3; |
| break; |
| } |
| if ((c == '$') && (prev != '\\')) { |
| state++; |
| } else { |
| *(output++) = c; |
| outputcnt--; |
| } |
| break; |
| case 1: /* Waiting for ( */ |
| if (c == '(' || c == '{') { |
| state++; |
| varname_start = input; |
| } else { |
| state = 0; |
| *(output++) = '$'; |
| outputcnt--; |
| |
| if (outputcnt) { |
| *(output++) = c; |
| outputcnt--; |
| } |
| } |
| break; |
| case 2: /* Waiting for ) */ |
| if (c == ')' || c == '}') { |
| int i; |
| char envname[CFG_CBSIZE], *envval; |
| /* Varname # of chars */ |
| int envcnt = input - varname_start - 1; |
| |
| /* Get the varname */ |
| for (i = 0; i < envcnt; i++) { |
| envname[i] = varname_start[i]; |
| } |
| envname[i] = 0; |
| |
| /* Get its value */ |
| envval = getenv (envname); |
| |
| /* Copy into the line if it exists */ |
| if (envval != NULL) |
| while ((*envval) && outputcnt) { |
| *(output++) = *(envval++); |
| outputcnt--; |
| } |
| /* Look for another '$' */ |
| state = 0; |
| } |
| break; |
| case 3: /* Waiting for ' */ |
| if ((c == '\'') && (prev != '\\')) { |
| state = 0; |
| } else { |
| *(output++) = c; |
| outputcnt--; |
| } |
| break; |
| } |
| prev = c; |
| } |
| |
| if (outputcnt) |
| *output = 0; |
| |
| #ifdef DEBUG_PARSER |
| printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n", |
| strlen (output_start), output_start); |
| #endif |
| } |
| |
| /* |
| * this is called from board_init() after the hardware has been set up |
| * and is usable. That seems like a good time to do this. |
| * Right now the return value is ignored. |
| */ |
| int do_auto_update(void) |
| { |
| block_dev_desc_t *stor_dev = NULL; |
| long sz; |
| int i, res, cnt, old_ctrlc, got_ctrlc; |
| char buffer[32]; |
| char str[80]; |
| int n; |
| |
| if (ide_dev_desc[0].type != DEV_TYPE_UNKNOWN) { |
| stor_dev = get_dev ("ide", 0); |
| if (stor_dev == NULL) { |
| debug ("ide: unknown device\n"); |
| return -1; |
| } |
| } |
| |
| if (fat_register_device (stor_dev, 1) != 0) { |
| debug ("Unable to register ide disk 0:1\n"); |
| return -1; |
| } |
| |
| /* |
| * Check if magic file is present |
| */ |
| if ((n = do_fat_read (AU_MAGIC_FILE, buffer, |
| sizeof(buffer), LS_NO)) <= 0) { |
| debug ("No auto_update magic file (n=%d)\n", n); |
| return -1; |
| } |
| |
| #ifdef CONFIG_AUTO_UPDATE_SHOW |
| board_auto_update_show (1); |
| #endif |
| puts("\nAutoUpdate Disk detected! Trying to update system...\n"); |
| |
| /* make sure that we see CTRL-C and save the old state */ |
| old_ctrlc = disable_ctrlc (0); |
| |
| /* just loop thru all the possible files */ |
| for (i = 0; i < N_AU_IMAGES; i++) { |
| /* |
| * Try to expand the environment var in the fname |
| */ |
| process_macros (au_image[i].name, str); |
| strcpy (au_image[i].name, str); |
| |
| printf("Reading %s ...", au_image[i].name); |
| /* just read the header */ |
| sz = do_fat_read (au_image[i].name, LOAD_ADDR, |
| image_get_header_size (), LS_NO); |
| debug ("read %s sz %ld hdr %d\n", |
| au_image[i].name, sz, image_get_header_size ()); |
| if (sz <= 0 || sz < image_get_header_size ()) { |
| puts(" not found\n"); |
| continue; |
| } |
| if (au_check_header_valid (i, sz) < 0) { |
| puts(" header not valid\n"); |
| continue; |
| } |
| sz = do_fat_read (au_image[i].name, LOAD_ADDR, |
| MAX_LOADSZ, LS_NO); |
| debug ("read %s sz %ld hdr %d\n", |
| au_image[i].name, sz, image_get_header_size ()); |
| if (sz <= 0 || sz <= image_get_header_size ()) { |
| puts(" not found\n"); |
| continue; |
| } |
| if (au_check_cksum_valid (i, sz) < 0) { |
| puts(" checksum not valid\n"); |
| continue; |
| } |
| puts(" done\n"); |
| |
| do { |
| res = au_do_update (i, sz); |
| /* let the user break out of the loop */ |
| if (ctrlc() || had_ctrlc ()) { |
| clear_ctrlc (); |
| if (res < 0) |
| got_ctrlc = 1; |
| break; |
| } |
| cnt++; |
| } while (res < 0); |
| } |
| |
| /* restore the old state */ |
| disable_ctrlc (old_ctrlc); |
| |
| puts("AutoUpdate finished\n\n"); |
| #ifdef CONFIG_AUTO_UPDATE_SHOW |
| board_auto_update_show (0); |
| #endif |
| |
| return 0; |
| } |
| |
| int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| do_auto_update(); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| autoupd, 1, 1, auto_update, |
| "autoupd - Automatically update images\n", |
| NULL |
| ); |
| #endif /* CONFIG_AUTO_UPDATE */ |