blob: d9037641ca462a8d73f331278a79ef3966d57de5 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* max98088.c -- MAX98088 ALSA SoC Audio driver
*
* Copyright 2010 Maxim Integrated Products
*
* Modified for U-Boot by Chih-Chung Chang (chihchung@chromium.org),
* following the changes made in max98095.c
*/
#include <audio_codec.h>
#include <div64.h>
#include <dm.h>
#include <i2c.h>
#include <i2s.h>
#include <log.h>
#include <sound.h>
#include <asm/gpio.h>
#include "maxim_codec.h"
#include "max98088.h"
/* codec mclk clock divider coefficients. Index 0 is reserved. */
static const int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000,
44100, 48000, 88200, 96000};
/*
* codec mclk clock divider coefficients based on sampling rate
*
* @param rate sampling rate
* @param value address of indexvalue to be stored
*
* Return: 0 for success or negative error code.
*/
static int rate_value(int rate, u8 *value)
{
int i;
for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
if (rate_table[i] >= rate) {
*value = i;
return 0;
}
}
*value = 1;
return -EINVAL;
}
/*
* Sets hw params for max98088
*
* @priv: max98088 information pointer
* @rate: Sampling rate
* @bits_per_sample: Bits per sample
*
* Return: -EIO for error, 0 for success.
*/
int max98088_hw_params(struct maxim_priv *priv, unsigned int rate,
unsigned int bits_per_sample)
{
int error;
u8 regval;
switch (bits_per_sample) {
case 16:
error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
M98088_DAI_WS, 0);
break;
case 24:
error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
M98088_DAI_WS, M98088_DAI_WS);
break;
default:
debug("%s: Illegal bits per sample %d.\n",
__func__, bits_per_sample);
return -EINVAL;
}
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN, 0);
if (rate_value(rate, &regval)) {
debug("%s: Failed to set sample rate to %d.\n",
__func__, rate);
return -EIO;
}
error |= maxim_bic_or(priv, M98088_REG_DAI1_CLKMODE,
M98088_CLKMODE_MASK, regval << 4);
priv->rate = rate;
/* Update sample rate mode */
if (rate < 50000)
error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
M98088_DAI_DHF, 0);
else
error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
M98088_DAI_DHF, M98088_DAI_DHF);
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN,
M98088_SHDNRUN);
if (error < 0) {
debug("%s: Error setting hardware params.\n", __func__);
return -EIO;
}
priv->rate = rate;
return 0;
}
/*
* Configures Audio interface system clock for the given frequency
*
* @priv: max98088 information
* @freq: Sampling frequency in Hz
*
* Return: -EIO for error, 0 for success.
*/
int max98088_set_sysclk(struct maxim_priv *priv, unsigned int freq)
{
int error = 0;
u8 pwr;
/* Requested clock frequency is already setup */
if (freq == priv->sysclk)
return 0;
/*
* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 30MHz)..
*/
if (freq >= 10000000 && freq < 20000000) {
error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x10);
} else if ((freq >= 20000000) && (freq < 30000000)) {
error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x20);
} else {
debug("%s: Invalid master clock frequency\n", __func__);
return -EIO;
}
error |= maxim_i2c_read(priv, M98088_REG_PWR_SYS, &pwr);
if (pwr & M98088_SHDNRUN) {
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
M98088_SHDNRUN, 0);
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
M98088_SHDNRUN, M98088_SHDNRUN);
}
debug("%s: Clock at %uHz\n", __func__, freq);
if (error < 0)
return -EIO;
priv->sysclk = freq;
return 0;
}
/*
* Sets Max98090 I2S format
*
* @priv: max98088 information
* @fmt: i2S format - supports a subset of the options defined in i2s.h.
*
* Return: -EIO for error, 0 for success.
*/
int max98088_set_fmt(struct maxim_priv *priv, int fmt)
{
u8 reg15val;
u8 reg14val = 0;
int error = 0;
if (fmt == priv->fmt)
return 0;
priv->fmt = fmt;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* Slave mode PLL */
error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_HI,
0x80);
error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_LO,
0x00);
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* Set to master mode */
reg14val |= M98088_DAI_MAS;
break;
case SND_SOC_DAIFMT_CBS_CFM:
case SND_SOC_DAIFMT_CBM_CFS:
default:
debug("%s: Clock mode unsupported\n", __func__);
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
reg14val |= M98088_DAI_DLY;
break;
case SND_SOC_DAIFMT_LEFT_J:
break;
default:
debug("%s: Unrecognized format.\n", __func__);
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_NB_IF:
reg14val |= M98088_DAI_WCI;
break;
case SND_SOC_DAIFMT_IB_NF:
reg14val |= M98088_DAI_BCI;
break;
case SND_SOC_DAIFMT_IB_IF:
reg14val |= M98088_DAI_BCI | M98088_DAI_WCI;
break;
default:
debug("%s: Unrecognized inversion settings.\n", __func__);
return -EINVAL;
}
error |= maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
M98088_DAI_MAS | M98088_DAI_DLY | M98088_DAI_BCI |
M98088_DAI_WCI, reg14val);
reg15val = M98088_DAI_BSEL64;
error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLOCK, reg15val);
if (error < 0) {
debug("%s: Error setting i2s format.\n", __func__);
return -EIO;
}
return 0;
}
/*
* max98088_reset() - reset the audio codec
*
* @priv: max98088 information
* Return: -EIO for error, 0 for success.
*/
static int max98088_reset(struct maxim_priv *priv)
{
int ret, i;
u8 val;
/*
* Reset to hardware default for registers, as there is not a soft
* reset hardware control register.
*/
for (i = M98088_REG_IRQ_ENABLE; i <= M98088_REG_PWR_SYS; i++) {
switch (i) {
case M98088_REG_BIAS_CNTL:
val = 0xf0;
break;
case M98088_REG_DAC_BIAS2:
val = 0x0f;
break;
default:
val = 0;
}
ret = maxim_i2c_write(priv, i, val);
if (ret < 0) {
debug("%s: Failed to reset: %d\n", __func__, ret);
return ret;
}
}
return 0;
}
/**
* max98088_device_init() - Initialise max98088 codec device
*
* @priv: max98088 information
*
* Return: -EIO for error, 0 for success.
*/
static int max98088_device_init(struct maxim_priv *priv)
{
unsigned char id;
int error = 0;
/* reset the codec, the DSP core, and disable all interrupts */
error = max98088_reset(priv);
if (error != 0) {
debug("Reset\n");
return error;
}
/* initialize private data */
priv->sysclk = -1U;
priv->rate = -1U;
priv->fmt = -1U;
error = maxim_i2c_read(priv, M98088_REG_REV_ID, &id);
if (error < 0) {
debug("%s: Failure reading hardware revision: %d\n",
__func__, id);
return -EIO;
}
debug("%s: Hardware revision: %d\n", __func__, id);
return 0;
}
static int max98088_setup_interface(struct maxim_priv *priv)
{
int error;
/* Reading interrupt status to clear them */
error = maxim_i2c_write(priv, M98088_REG_PWR_SYS, M98088_PWRSV);
error |= maxim_i2c_write(priv, M98088_REG_IRQ_ENABLE, 0x00);
/*
* initialize registers to hardware default configuring audio
* interface2 to DAI1
*/
error |= maxim_i2c_write(priv, M98088_REG_MIX_DAC,
M98088_DAI1L_TO_DACL | M98088_DAI1R_TO_DACR);
error |= maxim_i2c_write(priv, M98088_REG_BIAS_CNTL, 0xF0);
error |= maxim_i2c_write(priv, M98088_REG_DAC_BIAS2, 0x0F);
error |= maxim_i2c_write(priv, M98088_REG_DAI1_IOCFG,
M98088_S2NORMAL | M98088_SDATA);
/*
* route DACL and DACR output to headphone and speakers
* Ordering: DACL, DACR, DACL, DACR
*/
error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_LEFT, 1);
error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_RIGHT, 1);
error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_LEFT, 1);
error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_RIGHT, 1);
/* set volume: -12db */
error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_L, 0x0f);
error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_R, 0x0f);
/* set volume: -22db */
error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_L, 0x0d);
error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_R, 0x0d);
/* power enable */
error |= maxim_i2c_write(priv, M98088_REG_PWR_EN_OUT,
M98088_HPLEN | M98088_HPREN | M98088_SPLEN |
M98088_SPREN | M98088_DALEN | M98088_DAREN);
if (error < 0)
return -EIO;
return 0;
}
static int max98088_do_init(struct maxim_priv *priv, int sampling_rate,
int mclk_freq, int bits_per_sample)
{
int ret = 0;
ret = max98088_setup_interface(priv);
if (ret < 0) {
debug("%s: max98088 setup interface failed\n", __func__);
return ret;
}
ret = max98088_set_sysclk(priv, mclk_freq);
if (ret < 0) {
debug("%s: max98088 codec set sys clock failed\n", __func__);
return ret;
}
ret = max98088_hw_params(priv, sampling_rate, bits_per_sample);
if (ret == 0) {
ret = max98088_set_fmt(priv, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
}
return ret;
}
static int max98088_set_params(struct udevice *dev, int interface, int rate,
int mclk_freq, int bits_per_sample,
uint channels)
{
struct maxim_priv *priv = dev_get_priv(dev);
return max98088_do_init(priv, rate, mclk_freq, bits_per_sample);
}
static int max98088_probe(struct udevice *dev)
{
struct maxim_priv *priv = dev_get_priv(dev);
int ret;
priv->dev = dev;
ret = max98088_device_init(priv);
if (ret < 0) {
debug("%s: max98088 codec chip init failed\n", __func__);
return ret;
}
return 0;
}
static const struct audio_codec_ops max98088_ops = {
.set_params = max98088_set_params,
};
static const struct udevice_id max98088_ids[] = {
{ .compatible = "maxim,max98088" },
{ }
};
U_BOOT_DRIVER(max98088) = {
.name = "max98088",
.id = UCLASS_AUDIO_CODEC,
.of_match = max98088_ids,
.probe = max98088_probe,
.ops = &max98088_ops,
.priv_auto = sizeof(struct maxim_priv),
};