| /* |
| * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> |
| * |
| * (C) Copyright 2009 Freescale Semiconductor, Inc. |
| * |
| * Configuration settings for the MX51-3Stack Freescale board. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| |
| #define CONFIG_MX51 /* in a mx51 */ |
| #define CONFIG_SYS_TEXT_BASE 0x97800000 |
| |
| #include <asm/arch/imx-regs.h> |
| |
| #define CONFIG_DISPLAY_CPUINFO |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_INITRD_TAG |
| #define CONFIG_BOARD_LATE_INIT |
| |
| #ifndef MACH_TYPE_TTC_VISION2 |
| #define MACH_TYPE_TTC_VISION2 2775 |
| #endif |
| #define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2 |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_MXC_UART |
| #define CONFIG_MXC_UART_BASE UART3_BASE |
| #define CONFIG_MXC_GPIO |
| #define CONFIG_MXC_SPI |
| #define CONFIG_HW_WATCHDOG |
| |
| /* |
| * SPI Configs |
| * */ |
| #define CONFIG_FSL_SF |
| #define CONFIG_CMD_SF |
| |
| #define CONFIG_SPI_FLASH |
| #define CONFIG_SPI_FLASH_STMICRO |
| |
| /* |
| * Use gpio 4 pin 25 as chip select for SPI flash |
| * This corresponds to gpio 121 |
| */ |
| #define CONFIG_SF_DEFAULT_CS (1 | (121 << 8)) |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 |
| #define CONFIG_SF_DEFAULT_SPEED 25000000 |
| |
| #define CONFIG_ENV_SPI_CS (1 | (121 << 8)) |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_MAX_HZ 25000000 |
| #define CONFIG_ENV_SPI_MODE SPI_MODE_0 |
| |
| #define CONFIG_ENV_OFFSET (6 * 64 * 1024) |
| #define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024) |
| #define CONFIG_ENV_SIZE (4 * 1024) |
| |
| #define CONFIG_FSL_ENV_IN_SF |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| |
| /* PMIC Controller */ |
| #define CONFIG_POWER |
| #define CONFIG_POWER_SPI |
| #define CONFIG_POWER_FSL |
| #define CONFIG_FSL_PMIC_BUS 0 |
| #define CONFIG_FSL_PMIC_CS 0 |
| #define CONFIG_FSL_PMIC_CLK 2500000 |
| #define CONFIG_FSL_PMIC_MODE SPI_MODE_0 |
| #define CONFIG_FSL_PMIC_BITLEN 32 |
| #define CONFIG_RTC_MC13XXX |
| |
| /* |
| * MMC Configs |
| */ |
| #define CONFIG_FSL_ESDHC |
| #ifdef CONFIG_FSL_ESDHC |
| #define CONFIG_SYS_FSL_ESDHC_ADDR (0x70004000) |
| #define CONFIG_SYS_FSL_ESDHC_NUM 1 |
| |
| #define CONFIG_MMC |
| |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_CMD_FAT |
| #define CONFIG_DOS_PARTITION |
| #endif |
| |
| #define CONFIG_CMD_DATE |
| |
| /* |
| * Eth Configs |
| */ |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_MII |
| |
| #define CONFIG_FEC_MXC |
| #define IMX_FEC_BASE FEC_BASE_ADDR |
| #define CONFIG_FEC_MXC_PHYADDR 0x1F |
| |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NET |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_CONS_INDEX 3 |
| #define CONFIG_BAUDRATE 115200 |
| |
| /*********************************************************** |
| * Command definition |
| ***********************************************************/ |
| |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_SPI |
| #undef CONFIG_CMD_IMLS |
| |
| #define CONFIG_BOOTDELAY 3 |
| |
| #define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "loadaddr=0x90800000\0" |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP |
| #define CONFIG_SYS_PROMPT "Vision II U-boot > " |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
| |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 64 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| |
| #define CONFIG_SYS_MEMTEST_START 0x90000000 |
| #define CONFIG_SYS_MEMTEST_END 0x10000 |
| |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| |
| #define CONFIG_CMDLINE_EDITING |
| #define CONFIG_SYS_HUSH_PARSER |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 2 |
| #define PHYS_SDRAM_1 CSD0_BASE_ADDR |
| #define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024) |
| #define PHYS_SDRAM_2 CSD1_BASE_ADDR |
| #define PHYS_SDRAM_2_SIZE (256 * 1024 * 1024) |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CONFIG_SYS_INIT_SP_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| /* 166 MHz DDR RAM */ |
| #define CONFIG_SYS_DDR_CLKSEL 0 |
| #define CONFIG_SYS_CLKTL_CBCDR 0x19239100 |
| #define CONFIG_SYS_MAIN_PWR_ON |
| |
| #define CONFIG_SYS_NO_FLASH |
| |
| /* |
| * Framebuffer and LCD |
| */ |
| #define CONFIG_PREBOOT |
| #define CONFIG_VIDEO |
| #define CONFIG_VIDEO_IPUV3 |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_VGA_AS_SINGLE_DEVICE |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
| #define CONFIG_VIDEO_BMP_RLE8 |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_CMD_BMP |
| #define CONFIG_BMP_16BPP |
| #define CONFIG_IPUV3_CLK 133000000 |
| |
| #endif /* __CONFIG_H */ |