| /* |
| * Configuration for Versatile Express. Parts were derived from other ARM |
| * configurations. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __VEXPRESS_AEMV8A_H |
| #define __VEXPRESS_AEMV8A_H |
| |
| #define DEBUG |
| |
| #define CONFIG_REMAKE_ELF |
| |
| /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ |
| |
| /*#define CONFIG_SYS_GENERIC_BOARD*/ |
| |
| #define CONFIG_SYS_NO_FLASH |
| |
| #define CONFIG_SUPPORT_RAW_INITRD |
| |
| /* Cache Definitions */ |
| #define CONFIG_SYS_DCACHE_OFF |
| #define CONFIG_SYS_ICACHE_OFF |
| |
| #define CONFIG_IDENT_STRING " vexpress_aemv8a" |
| #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" |
| |
| /* Link Definitions */ |
| #define CONFIG_SYS_TEXT_BASE 0x80000000 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) |
| |
| /* Flat Device Tree Definitions */ |
| #define CONFIG_OF_LIBFDT |
| |
| #define CONFIG_DEFAULT_DEVICE_TREE vexpress64 |
| |
| /* SMP Spin Table Definitions */ |
| #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) |
| |
| /* CS register bases for the original memory map. */ |
| #define V2M_PA_CS0 0x00000000 |
| #define V2M_PA_CS1 0x14000000 |
| #define V2M_PA_CS2 0x18000000 |
| #define V2M_PA_CS3 0x1c000000 |
| #define V2M_PA_CS4 0x0c000000 |
| #define V2M_PA_CS5 0x10000000 |
| |
| #define V2M_PERIPH_OFFSET(x) (x << 16) |
| #define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) |
| #define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) |
| #define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) |
| |
| #define V2M_BASE 0x80000000 |
| |
| /* |
| * Physical addresses, offset from V2M_PA_CS0-3 |
| */ |
| #define V2M_NOR0 (V2M_PA_CS0) |
| #define V2M_NOR1 (V2M_PA_CS4) |
| #define V2M_SRAM (V2M_PA_CS1) |
| |
| /* Common peripherals relative to CS7. */ |
| #define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) |
| #define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) |
| #define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) |
| #define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) |
| |
| #define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) |
| #define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) |
| #define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) |
| #define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) |
| |
| #define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) |
| |
| #define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17)) |
| #define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18)) |
| |
| #define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22)) |
| #define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23)) |
| |
| #define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26)) |
| |
| #define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31)) |
| |
| /* System register offsets. */ |
| #define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) |
| #define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) |
| #define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) |
| |
| /* Generic Timer Definitions */ |
| #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ |
| |
| /* Generic Interrupt Controller Definitions */ |
| #define GICD_BASE (0x2C001000) |
| #define GICC_BASE (0x2C002000) |
| |
| #define CONFIG_SYS_MEMTEST_START V2M_BASE |
| #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) |
| |
| /* SMSC9115 Ethernet from SMSC9118 family */ |
| #define CONFIG_SMC9111 1 |
| #define CONFIG_SMC9111_BASE (0x1a000000) |
| |
| /* PL011 Serial Configuration */ |
| #define CONFIG_PL011_SERIAL |
| #define CONFIG_PL011_CLOCK 24000000 |
| #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ |
| (void *)CONFIG_SYS_SERIAL1} |
| #define CONFIG_CONS_INDEX 0 |
| |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| #define CONFIG_SYS_SERIAL0 V2M_UART0 |
| #define CONFIG_SYS_SERIAL1 V2M_UART1 |
| |
| /* Command line configuration */ |
| #define CONFIG_MENU |
| /*#define CONFIG_MENU_SHOW*/ |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_BDI |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_PXE |
| #define CONFIG_CMD_ENV |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_IMI |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_CMD_RUN |
| #define CONFIG_CMD_BOOTD |
| #define CONFIG_CMD_ECHO |
| #define CONFIG_CMD_SOURCE |
| #define CONFIG_CMD_FAT |
| #define CONFIG_DOS_PARTITION |
| |
| /* BOOTP options */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_PXE |
| #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 |
| |
| /* Miscellaneous configurable options */ |
| #define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) |
| |
| /* Physical Memory Map */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */ |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| |
| /* Initial environment variables */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "kernel_addr=0x200000\0" \ |
| "initrd_addr=0xa00000\0" \ |
| "initrd_size=0x2000000\0" \ |
| "fdt_addr=0x100000\0" \ |
| "fdt_high=0xa0000000\0" |
| |
| #define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0" |
| #define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \ |
| "$initrd_addr:$initrd_size $fdt_addr" |
| #define CONFIG_BOOTDELAY -1 |
| |
| /* Do not preserve environment */ |
| #define CONFIG_ENV_IS_NOWHERE 1 |
| #define CONFIG_ENV_SIZE 0x1000 |
| |
| /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PROMPT "VExpress64# " |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| #define CONFIG_SYS_LONGHELP |
| #define CONFIG_CMDLINE_EDITING 1 |
| #define CONFIG_SYS_MAXARGS 64 /* max command args */ |
| |
| #endif /* __VEXPRESS_AEMV8A_H */ |