blob: 65736644b613361fbaf9bc9eddd1dcdacb2ab642 [file] [log] [blame]
/*
* Copyright (C) 2005-2006 Atmel Corporation
*
* Configuration settings for the ATSTK1002 CPU daughterboard
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
#define CONFIG_ATSTK1002 1
#define CONFIG_ATSTK1000 1
#define CONFIG_ATSTK1000_EXT_FLASH 1
/*
* Timer clock frequency. We're using the CPU-internal COUNT register
* for this, so this is equivalent to the CPU core clock frequency
*/
#define CFG_HZ 1000
/*
* Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
* frequency and the peripherals to run at 1/4 the PLL frequency.
*/
#define CONFIG_PLL 1
#define CFG_POWER_MANAGER 1
#define CFG_OSC0_HZ 20000000
#define CFG_PLL0_DIV 1
#define CFG_PLL0_MUL 7
#define CFG_PLL0_SUPPRESS_CYCLES 16
#define CFG_CLKDIV_CPU 0
#define CFG_CLKDIV_HSB 1
#define CFG_CLKDIV_PBA 2
#define CFG_CLKDIV_PBB 1
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
* ivco = PLLOPT<1:0>
*
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
*/
#define CFG_PLL0_OPT 0x04
#undef CONFIG_USART0
#define CONFIG_USART1 1
#undef CONFIG_USART2
#undef CONFIG_USART3
/* User serviceable stuff */
#define CONFIG_DOS_PARTITION 1
#define CONFIG_CMDLINE_TAG 1
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
#define CONFIG_BOOTCOMMAND \
"fsload; bootm $(fileaddr)"
/*
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
* data on the serial line may interrupt the boot sequence.
*/
#define CONFIG_BOOTDELAY 2
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot in %d seconds\n"
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
/*
* These are "locally administered ethernet addresses" generated by
* ./tools/gen_eth_addr
*
* After booting the board for the first time, new addresses should be
* generated and assigned to the environment variables "ethaddr" and
* "eth1addr".
*/
#define CONFIG_ETHADDR 6a:87:71:14:cd:cb
#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
/*
* BOOTP options
*/
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
#define CONFIG_CMD_REGINFO
#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
#define CONFIG_PIO2 1
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
/* External flash on STK1000 */
#if 0
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
#endif
#define CFG_FLASH_BASE 0x00000000
#define CFG_FLASH_SIZE 0x800000
#define CFG_MAX_FLASH_BANKS 1
#define CFG_MAX_FLASH_SECT 135
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_INTRAM_BASE 0x24000000
#define CFG_INTRAM_SIZE 0x8000
#define CFG_SDRAM_BASE 0x10000000
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 2MB for the kernel run-time image */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
#define CFG_PROMPT "Uboot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 8
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
#define CFG_MEMTEST_START \
({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
#define CFG_MEMTEST_END \
({ \
DECLARE_GLOBAL_DATA_PTR; \
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \
})
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#endif /* __CONFIG_H */